Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Varian VJW1454C Channel Selector Sub-System 01014540-01/A Microwave Satcom
Varian
$150.00Was: $300.00Varian VJW1454C Channel Selector Sub-System 01014540-01/A Microwave SatcomThe Varian VJW1454C is a Channel Selector Sub-System designed for microwave satellite communications ground station equipment...45556- SKU:
- 45556
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW1454C
- MPN:
- 01014540-01/A
- Secondary Model:
- 01014521-00/B
- SKU:
- 45556
- Type:
- Channel Selector Sub-System
- Condition:
- Used – Inspected and Tested
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop / Rackmount
- Front Panel Controls:
- UP, DOWN, SEL, LAMP TEST, CONT MODE pushbuttons
- Front Panel Displays:
- Red 7-segment CHANNEL display; red 7-segment SELECT display
- Front Panel Indicators:
- PWR FAIL, CABLE LEDs; LOC, REM, AUX status LEDs
- Rear Connectors:
- IEC AC power inlet (J1); DB25-style connector; J3, J5, J6 multi-pin
- Rear Features:
- RESET button; multiple D-sub multi-pin I/O connectors (J3, J5, J6)
- Application:
- Microwave satellite communications channel selection
- Compatible With:
- Varian microwave equipment / satcom ground station systems
- Seller Notes:
- Unit only — no additional accessories observed.
- Condition Notes:
- Varian VJW1454C Channel Selector Sub-System 01014540-01/A has been inspected and is in good used condition. Chassis shows light surface scuffing; front panel controls and displays appear intact. Rear connectors undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Varian VJW1455B1 Channel Select Assy 01014521-00 Microwave Equipment Division
Varian
$150.00Was: $300.00Varian VJW1455B1 Channel Select Assy 01014521-00 Microwave Equipment DivisionThe Varian VJW1455B1 is a Channel Select Assembly produced by Varian's Microwave Equipment Division. It provides...45555- SKU:
- 45555
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW1455B1
- MPN:
- 01014521-00
- Secondary Model:
- 0101454204
- Type:
- Channel Select Assembly
- SKU:
- 45555
- Seller Notes:
- Unit only; no cables included. Inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Division:
- Varian Microwave Equipment Division
- Power Requirements:
- 115VAC, 100VA Max
- AC Power Connector:
- IEC C14 inlet (J1)
- Rear Connectors:
- Multiple D-sub connectors: J2, J3, J4, J5, J6
- Front Panel Controls:
- UP, DOWN, SEL, LAMP TEST, CONT MODE pushbuttons
- Front Panel Displays:
- Dual LED numeric displays: CHANNEL and SELECT
- Front Panel Indicators:
- PWR FAIL, CABLE indicators; LOC/REM/AUX mode labels
- Control Modes:
- Local, Remote, Auxiliary
- Reset:
- Rear-panel RESET button
- Form Factor:
- Benchtop / Rackmount
- Condition:
- Used – Inspected and in good condition
- Condition Notes:
- This Varian VJW1455B1 Channel Select Assembly (P/N 01014521-00) has been inspected and is in good condition. Light surface wear on the chassis; front-panel controls, LED displays, and rear D-sub connectors appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Hitachi H80 AC Magnetic Contactor AC600V 80A 3-Phase 200-220V Coil 31H99
Hitachi
$85.00Was: $175.00Hitachi H80 AC Magnetic Contactor AC600V 80A 3-Phase 200-220V Coil 31H99AC magnetic contactor rated for 80A at 600V, 3-phase operation. Controls electrical circuits via electromagnetic switching with...45551- SKU:
- 45551
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Hitachi
- Model:
- H80
- MPN:
- 31H99
- Type:
- AC Magnetic Contactor
- SKU:
- 45551
- Voltage Rating:
- AC 600V
- Current Rating:
- 80A
- Phase:
- Three Phase
- Coil Voltage:
- 200-220V AC, 50/60Hz
- Max Capacity (IEM AC3 220V):
- 19kW / 80A
- Max Capacity (IEM AC3 440V):
- 37kW / 80A
- Max Capacity (IEM AC3 550V):
- 45kW / 72A
- Max Capacity (IEM AC3 11th):
- 120A
- Max Capacity (IEC 240V):
- 22kW / 80A
- Max Capacity (IEC 440V):
- 37kW / 80A
- Max Capacity (IEC 550V):
- 45kW / 72A
- Standards:
- IEM AC3-1-1-0 90T402; IEC 158-1; BS 5424-1 AC3
- Thermal Overload Relay:
- Not Included
- Auxiliary Component:
- Fuji Electric ENC471K-14A surge suppressor
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- No thermal overload relay. Includes attached Fuji Electric ENC471K-14A suppressor.
- Condition:
- Used – Inspected and in Good Condition
- Form Factor:
- DIN Rail / Panel Mount
- Condition Notes:
- Hitachi H80 AC Magnetic Contactor, AC600V, 80A. Inspected and in good condition. Light surface soiling from prior industrial use. No thermal overload relay included. Fuji Electric ENC471K-14A suppressor attached.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Nagano Keiki KH15-PT14-C-200 Pressure Transmitter 0-200 kgf/cm² 24V DC 1-5V
Nagano Keiki Co
$85.00Was: $175.00Nagano Keiki KH15-PT14-C-200 Pressure Transmitter 0-200 kgf/cm² 24V DC 1-5VThe Nagano Keiki KH15-PT14-C-200 is a compact inline pressure transmitter designed for industrial process measurement. It...45521- SKU:
- 45521
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Nagano Keiki
- Model:
- KH15-PT14-C-200
- MPN:
- KH15-PT14-C-200-0.25
- Type:
- Pressure Transmitter
- SKU:
- 45521
- Pressure Range:
- 0-200 kgf/cm²
- Power Supply Voltage:
- 24V DC
- Output Signal:
- 1-5V DC
- Connector Type:
- 7-Pin Circular (MIL-style)
- Process Connection:
- Male threaded fitting (NPT/PT style)
- Form Factor:
- Inline / Inline Cylindrical
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no cable or connector included.
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Nagano Keiki KH15-PT14-C-200 pressure transmitter. Inspected, good used condition. Body and label intact; some surface oxidation on the process fitting typical of used industrial hardware. 7-pin connector undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control Module
Standard
$55.00Was: $100.00Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control ModuleThe Standard MT830 is a rackmount agile satellite receiver designed for broadcast and professional satellite downlink...45518- SKU:
- 45518
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 24.00 LBS
- Brand:
- Standard Communications
- Model:
- MT830
- MPN:
- MT830
- Type:
- Ku-Band Agile Satellite Receiver / IRD
- SKU:
- 45518
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- No control access module included; unit only as shown
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 120V AC, 60Hz, 70W
- Frequency Band:
- C-Band and Ku-Band
- RF Input:
- 950 MHz – 1450 MHz (LNB IF input)
- LNB Power Output:
- 20V DC, 300mA Max
- External IF:
- EXT 70MHz input
- Antenna Polarity:
- Normal / Reverse switchable
- Channel Display:
- Green LED numeric channel display
- Front Panel Meter:
- Analog Signal / C/N / Tune meter
- Video Output:
- Composite Video Out, Video Out (RCA)
- Audio Output:
- Multiple audio outputs (screw terminal)
- Relay Outputs:
- C-Band RF Relay (VER/OUT/HOR), Ku-Band RF Relay
- Remote Control:
- Remote Control port (multi-pin DIN) on rear
- I/O Module:
- CRC800CI I/O interface module installed
- Format Settings:
- Satellite Format, RF Input, Video, Audio x3, Timer/Alarm, Config
- Compatible With:
- Standard Agile Omni Broadcast satellite receive systems
- Fuse Rating:
- 0.75A, 250V
- Note:
- TRACE CUT label present on rear panel; no control access module
- Condition Notes:
- Standard MT830 Agile Omni Ku-Band satellite receiver. Inspected, good used condition. Pulled from working environment. No control access module included. TRACE CUT label on rear. Please see photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF
Standard Communication
$60.00Was: $125.00Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF1U rackmount integrated receiver descrambler (IRD) for C-band satellite systems. Handles RF input from 950–1450 MHz and...45515- SKU:
- 45515
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Standard Communications
- Model:
- MT650
- MPN:
- MT650
- Secondary Model:
- Agile IRD-2
- Type:
- Integrated Receiver Descrambler (IRD)
- SKU:
- 45515
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; power cord visible in photos. Inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Form Factor:
- 1U Rackmount
- Descrambler System:
- Videocipher II Plus (VC II Plus)
- Descrambler Type:
- Commercial Descrambler Capable
- IF Frequency:
- 70 MHz
- RF Input Frequency Range:
- 950–1450 MHz
- Video/OSD Test Output:
- 75 Ohm BNC
- IF Test Output:
- 50 Ohm BNC, 70MHz IF
- Video Output:
- BNC (rear panel)
- Audio Outputs:
- Left, Right, Mono (terminal block)
- Data/Clock Output:
- Terminal block (DATA, CLOCK, CADBGDC)
- Loop Through:
- 950–1450 MHz RF loop-through
- Composite Output:
- Yes — rear panel
- Power Requirements:
- 1A 250V (as labeled on rear panel)
- Front Panel Indicators:
- SYNC, AUTH, BYPASS, SIGNAL LEDs
- Front Panel Controls:
- OSD, AFC, AGC switches; MGC Control; Video Level; Audio L/R/Mono; Fine Tune
- Satellite Freq Selection:
- DIP switch (CH # selector on front)
- Compatible With:
- C-band satellite systems, commercial VSAT headends
- Dimensions:
- 23 x 19 x 2 in (approx., per original listing)
- Condition Notes:
- Standard MT650 Agile IRD-2 Videocipher II Plus satellite receiver. Inspected and in good condition. Light surface wear on front panel; minor paint chipping near channel selector door visible in photos. Power cord included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$60.00Was: $125.00 -
Fraunhofer IIS DT500 Digital Media Satellite Modulator ASI IF/IQ 10MHz Ref USB
Fraunhofer
$594.00Was: $1,200.00Fraunhofer IIS DT500 Digital Media Satellite Modulator ASI IF/IQ 10MHz Ref USBDesktop satellite modulator and encoder designed for DVB broadcast and satcom applications. Accepts ASI input and outputs...45510- SKU:
- 45510
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 24.00 LBS
- Brand:
- Fraunhofer IIS
- Model:
- DT500
- MPN:
- DT500
- Type:
- Digital Media Satellite Modulator / Encoder
- SKU:
- 45510
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; inspected and in good condition
- Country/Region of Manufacture:
- Germany
- Form Factor:
- Desktop / Benchtop
- Power Requirements:
- Full Range 100-240V AC
- Dimensions:
- 17 x 17 x 6 in (approx)
- Interface Type:
- ASI, IF/IQ, 10 MHz Ref, ClockOut, DataIn, USB
- Connector Types:
- BNC (ASI, IF/IQ, 10 MHz Ref, ClockOut, DataIn), DB9, USB, VGA
- Signal Interface:
- ASI (Asynchronous Serial Interface)
- Reference Input:
- 10 MHz Reference (BNC)
- Additional Interfaces:
- IF/IQ output, ClockOut, DataIn (BNC)
- PC I/O Ports:
- PS/2 keyboard, PS/2 mouse, VGA, USB x4, parallel, serial
- Display:
- Built-in color LCD panel
- Front Panel Controls:
- Power, S1/S2, Function, Config, Status, Setup, numeric keypad, nav keys, Esc, USB
- Application:
- Satellite communications, digital media broadcast, DVB
- Compatible With:
- DVB satellite broadcast systems, satcom test environments
- Internal Components:
- Custom RF/digital PCBs, internal ATX-style power supply
- Drive Bay:
- Front-panel DVD/optical drive bay visible
- Condition Notes:
- Fraunhofer IIS DT500 Digital Media Satellite Equipment. Inspected, good condition. Clean chassis with light normal wear. Not bench-tested at our facility; pulled from a working environment. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$594.00Was: $1,200.00 -
Fuji Electric BRR21N-01S Earth Leakage Relay 600V 50/60Hz 30mA Trip 100/110V
Fuji Electric
$100.00Was: $200.00Fuji Electric BRR21N-01S Earth Leakage Relay 600V 50/60Hz 30mA Trip 100/110VEarth leakage protective relay designed to detect ground faults and trip protection circuits. Operates at 600V rated...45487- SKU:
- 45487
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Fuji Electric
- Model:
- BRR21N-01S
- MPN:
- BRR21N-01S
- Type:
- Earth Leakage Protective Relay
- SKU:
- 45487
- Rated Voltage:
- 600V
- Rated Control Voltage:
- 100/110V
- Frequency:
- 50/60Hz
- Rated Tripping Current:
- 30mA
- Rated Non-Tripping Current:
- 15mA
- Tripping Time:
- Below 0.1s
- Through Hole Diameter:
- 40mm
- Contact Configuration:
- 3 terminals (21, 22, 24)
- Contact Capacity (Continuous):
- 5A
- Breaking Current Capacity:
- 4C 5A (220V)
- Country/Region of Manufacture:
- Japan
- Form Factor:
- DIN Rail / Panel Mount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories included.
- Condition Notes:
- Fuji Electric BRR21N-01S Earth Leakage Relay in good used condition. Pulled from a working environment where it was in active service. Housing intact, terminals and through-hole show normal wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00 -
Nimbus NSD360-3 19in Rackmount Cabinet 38U on Wheels w/ Shelves 230V 0.2KVA
Nimbus
$600.00Was: $1,200.00Nimbus NSD360-3 19in Rackmount Cabinet 38U on Wheels w/ Shelves 230V 0.2KVAA 38U mobile rackmount cabinet designed to house telecom, networking, and industrial equipment in a 19-inch standard form...45438- SKU:
- 45438
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 230.00 LBS
- Brand:
- Nimbus Technology & Engineering
- Model:
- NSD360-3
- MPN:
- NSD360-3
- Type:
- 19in Rackmount Cabinet Enclosure
- SKU:
- 45438
- Rack Unit Capacity:
- 38U
- Rack Width:
- 19 inch
- Overall Dimensions (H x W x D):
- H1900 x W600 x D400 mm
- Usable Interior Dimensions:
- 19 x 19 x 67 inches (approx)
- Voltage:
- 230V
- Current:
- 0.56A
- Power Rating:
- 0.2 KVA
- Wiring Classification:
- IEC
- Specifications:
- 89/392/EEC, 91/386/EEC
- Mobility:
- 4 locking swivel casters (wheels)
- Shelves Included:
- 3 adjustable perforated metal shelves
- Door:
- Single front door with key lock
- Grounding:
- Internal grounding bus bar with bonding cables
- Monitor Hole:
- 18mm monitor hole
- Mount Hole Spacing:
- 2 mount holes every 3/4 inch
- Form Factor:
- Freestanding / Mobile Rack Enclosure
- Certifications:
- ETL Evaluated to Recognized National Standards
- Country/Region of Manufacture:
- United Kingdom
- Seller Notes:
- Includes 3 adjustable perforated shelves and locking door; sold without rack-mount equipment
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Nimbus NSD360-3 19in 38U rackmount cabinet on wheels. Inspected and in good used condition. Light scuffing on finish; frame, shelves, locking door, casters, and grounding bus all present and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Uniforce PSIF-2 Camera System Power Supply 20/20 Designs PSIF A001 BNC Sync
Uniforce
$55.00Was: $100.00Uniforce PSIF-2 Camera System Power Supply 20/20 Designs PSIF A001 BNC SyncThe Uniforce PSIF-2 is a dedicated power supply and camera interface unit built by Uniforce Sales and Engineering. It...45387- SKU:
- 45387
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- Uniforce
- Model:
- PSIF-2
- MPN:
- PSIF-2
- Secondary Model:
- PSIF A001
- Type:
- Camera System Power Supply / Interface
- SKU:
- 45387
- Manufacturer:
- Uniforce Sales and Engineering
- PCB Manufacturer:
- 20/20 Designs, Inc.
- PCB Part Number:
- PSIF A001
- Year / Date Code:
- 1993
- Internal Transformer 1:
- Deltron W301D
- Internal Transformer 2:
- Deltron W100A
- Internal Component:
- MXT1080
- Camera Inputs:
- J1 D-sub; BNC: PRN (F/R), EXSYNC, MCLK
- Camera Outputs:
- J2 D-sub; BNC: FRAME VALID, LINE VALID, FRAME VALID
- Connector Types:
- BNC, D-sub (25-pin)
- Included Cables:
- D-sub 25-pin camera cable, AC power cord
- Power Switch:
- Rocker on/off switch, rear panel
- Form Factor:
- Benchtop / Desktop Chassis
- Seller Notes:
- Includes D-sub camera interface cable and AC power cord
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Uniforce PSIF-2 Camera Power Supply inspected, good cosmetic condition. Not powered or tested at our facility. Includes D-sub camera cable and AC power cord. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Optimum Electronics PG404 Pattern Generator Baud Rate Distortion Bias Tester
Optimum Electronics
$65.00Was: $125.00Optimum Electronics PG404 Pattern Generator Baud Rate Distortion Bias TesterHandheld pattern generator and distortion tester used for telecommunications and data communications testing. Measures baud...45356- SKU:
- 45356
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Optimum Electronics
- Model:
- PG404
- MPN:
- PG404
- Type:
- Pattern Generator / Distortion Tester
- SKU:
- 45356
- Seller Notes:
- Special calibration (Baud Rate and Distortion only). Last calibrated 07-17-2003.
- Form Factor:
- Handheld / Portable
- Measurement Type:
- Baud Rate, Start-Stop Distortion (Bias), Percent Distortion
- Baud Rates:
- 150, 300, 600, 1200 Baud
- Data Modes:
- Mark, Space, SW (Switching)
- Pattern Modes:
- 5 Level, 8 Level, RLY, Mark, Space
- Percent Distortion Settings:
- 0, 12.5, 25, 37.5
- Power Source:
- AC or Battery (PWR / BATT selector)
- Connectors:
- SIG (red banana), GND (black banana), Low Level, Neutral, Loop
- Side Controls:
- AC and LP trimmer adjustments on right side panel
- Application:
- Telecom / data communications start-stop distortion testing
- Last Calibration Date:
- 07-17-2003
- Calibration Scope:
- Special Calibration – Baud Rate and Distortion Only
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Optimum Electronics PG404 Pattern Generator, inspected and in good used condition. Controls and housing intact with light surface wear. Special calibration (Baud Rate and Distortion only), last cal. 07-17-2003.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor Assembly
Satellite Transmission Systems
$150.00Was: $300.00Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor AssemblyRedundancy switching and monitoring assembly for high-power amplifiers in satellite ground stations. Routes signal between...45325- SKU:
- 45325
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Satellite Transmission Systems
- Model:
- HPA Switching & Monitor Assembly
- MPN:
- C14922
- Secondary Model:
- C14922 Rev B
- Type:
- HPA Redundancy Switching & Monitor Assembly
- SKU:
- 45325
- Revision:
- Rev B
- Form Factor:
- Rackmount
- Number of HPA Channels:
- 2 (HPA 1 / HPA 2)
- Control Mode:
- Auto / Manual
- Indicators:
- HPA 1 Norm, HPA 1 Fail, HPA 2 Norm, HPA 2 Fail; ON LINE / OFF LINE
- Relay Type:
- Electromechanical relay matrix (visible internal relays)
- Application:
- Satellite ground station HPA redundancy switching
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Hauppauge, New York
- Condition:
- Used – Inspected
- Condition Notes:
- Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor Assembly. Inspected and in good used condition. Front panel indicators and pilot lights intact. Internal relay matrix and wiring harness complete.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
3dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator Rackmount 115/230VAC BNC RF Out
3dbm
$250.00Was: $500.003dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator Rackmount 115/230VAC BNC RF OutThe 3dbm Inc. 70FMO-BS-2X-AYD is a rack-mounted 70 MHz FM modulator designed for satellite communications uplink chains. Built...45323- SKU:
- 45323
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 18.00 LBS
- Brand:
- 3dbm
- Model:
- 70FMO-BS-2X-AYD
- MPN:
- 70FMO-BS-2X-AYD
- Type:
- FM Modulator
- SKU:
- 45323
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories included. See photos for condition details.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount
- Power Requirements:
- 115/230VAC, 1-Phase, 47-63Hz
- Fuse Rating:
- 115V: 1A / 230V: 0.5A SB
- Output Frequency:
- 70 MHz
- Modulation Type:
- FM (Frequency Modulation)
- RF Output Connector:
- BNC (J1 – RF Out)
- FM Mod Input Connector:
- BNC (J2 – FM Mod In)
- Operate/Calibrate Connector:
- DB9 (J4 – Operate/Calibrate Select)
- Alarm Output Connector:
- Terminal block J3 – Common, N.O., N.C.
- RF Monitor Output:
- BNC (front panel)
- Voltage Monitor Output:
- Banana jacks – GND and +15V (front panel)
- Front Panel Controls:
- AC Power switch, Operate/Calibrate switch, Fault LED
- Peak Deviation Meter:
- Analog meter, kHz scale (front panel)
- Internal Assembly:
- Two 3dbm sub-modules: Relay Enclosure + 70MHz FM Modulator
- PCB Assembly:
- ASSY.50886 (BD.50113L power board)
- Manufacturer Location:
- Camarillo, CA
- Condition Notes:
- This 3dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator is in good used condition. Pulled from a working environment where it was in use and functional. Front panel and rear connectors show light rack wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
Triad Solutions ATC1 Expander Power Supply 230VAC 50/60Hz 0.5A 115VAC Input
Triad Solutions
$95.00Was: $200.00Triad Solutions ATC1 Expander Power Supply 230VAC 50/60Hz 0.5A 115VAC InputStep-up power supply unit designed to convert 115VAC input to 230VAC output at 0.5A capacity. Built for industrial and...45222- SKU:
- 45222
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 13.00 LBS
- Brand:
- Triad Solutions LLC
- Model:
- ATC1
- MPN:
- ATC1
- Type:
- Expander Power Supply
- SKU:
- 45222
- Input Voltage:
- 115VAC, 50/60Hz
- Output Voltage:
- 230VAC
- Output Current:
- 0.5A
- Frequency:
- 50/60Hz
- Fuse Rating:
- 2 x 1A, 250V
- Connector Type:
- Multi-pin circular connector (front); IEC C14 inlet (rear)
- Power Switch:
- Illuminated rocker switch (OFF/ON)
- Form Factor:
- Benchtop / Desktop enclosure
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Triad Solutions ATC1 Expander Power Supply — inspected, in good used condition. Pulled from a working environment. Enclosure shows minor surface wear. Front switch, multi-pin connector, and rear IEC inlet appear clean and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$95.00Was: $200.00 -
Tektronix 1140A HNVS Programmable Power Supply Test System w/ Data Coupler SM-5
Tektronix
$2,970.00Was: $6,000.00Tektronix 1140A HNVS Programmable Power Supply Test System w/ Data Coupler SM-5 Programmable power supply test system designed for automated testing of avionics and military subsystems. Operates as...45194- SKU:
- 45194
- Availability:
- Usually ships within 3-5 business days due to size and system complexity.
- Weight:
- 400.00 LBS
- Brand:
- Tektronix
- Model:
- 1140A
- MPN:
- 386-1710-01
- Secondary Model:
- 1340 Data Coupler / SM-5 Signal Switcher
- Type:
- Programmable Power Supply HNVS Test System
- SKU:
- 45194
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes 2x 1140A PSUs, 2x 1340 Data Couplers, SM-5 Switcher, Station Control Interface, 2x 7-Phase Clock Generators, 4x HNVS Fixture Assemblies, all cables
- Form Factor:
- Rackmount / Benchtop System
- Includes:
- Station Control Interface, Data Couplers, Signal Switcher, Clock Generators, Test Fixtures, Cables
- Station Control Interface P/N:
- 015-0211-03
- Data Coupler Model:
- 1340 Data Coupler
- Data Coupler P/N:
- 386-181-00
- Signal Switcher Model:
- SM-5
- Signal Switcher P/N:
- 015-0281-00
- Signal Switcher Mfr P/N:
- 700-1928-01
- Clock Generator:
- 7 Phase Clock Generator (x2) – Applied Test Systems Inc.
- Test Fixture:
- HNVS Test Fixture Assembly (x4) – Virginia Panel Corp
- Test Fixture P/N:
- 410104111
- Test Fixture Manufacturer:
- Virginia Panel Corp, Waynesboro VA
- SM-5 Power Requirements:
- 115V 0.8A SLO / 230V 0.4A SLO
- Interface Connectors:
- Micro-D / Centronic multi-pin, BNC, military circular
- Country/Region of Manufacture:
- United States
- Application:
- HNVS automated test, avionics/military subsystem test
- Compatible With:
- Tektronix HNVS Automatic Test System
- Condition Notes:
- Tektronix 1140A HNVS Programmable Power Supply Test System. Inspected, in good used condition. Includes 2x 1140A PSUs, 2x 1340 Data Couplers, SM-5 Switcher, Station Control Interface, 2x 7-Phase Clock Generators, 4x HNVS Fixture Assemblies, and all
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$2,970.00Was: $6,000.00 -
Tandberg E5424 MPEG-2 Encoder NDS Board QPSK MOD Option Rackmount DVB
Tandberg
$375.00Was: $750.00Tandberg E5424 MPEG-2 Encoder NDS Board QPSK MOD Option Rackmount DVBProfessional broadcast-grade MPEG-2 encoder designed for satellite uplink and DVB transmission. This 4U rackmount unit encodes and...45115- SKU:
- 45115
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 45.00 LBS
- Brand:
- Tandberg
- Model:
- E5424
- MPN:
- E5424
- Type:
- MPEG-2 Encoder
- SKU:
- 45115
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes NDS board, QPSK MOD option, and associated cards
- Country/Region of Manufacture:
- United Kingdom
- Form Factor:
- Rackmount
- Power Requirements:
- 100-120V / 220-240V AC, 50/60Hz
- Video Standard:
- MPEG-2
- Modulation Type:
- QPSK
- Interface Type:
- RS-422, RS-232, RS-232/485, DVB parallel, SDI
- Video Input:
- Y/Component, Composite, Analog Video, Digital Video
- Audio Input:
- Audio 1 L/R, Audio 2 L/R, AES/EBU, XLR
- Network Interface:
- Ethernet 1, Ethernet 2
- RF Output:
- IF Out Main, IF Out Monitor, RF Out
- Additional Options:
- NDS conditional access board, QPSK MOD
- Signal Standard:
- DVB
- Application:
- Broadcast, satellite uplink, professional video encoding
- Number of Rack Units:
- 4U (two 2U chassis)
- Condition Notes:
- Tandberg E5424 MPEG-2 Encoder sold AS-IS for parts or repair. Powers on (Power LED lit) but no screen output is produced. May need external device or repair. Includes NDS board, QPSK MOD option, and cards.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$375.00Was: $750.00 -
GE SM-TT&C Carrier Kill Switch TRMS50M RF Coaxial 28VDC Matrix Panel SMP-508
GE
$700.00Was: $1,400.00GE SM-TT&C Carrier Kill Switch TRMS50M RF Coaxial 28VDC Matrix Panel SMP-508Rackmount RF coaxial matrix panel for satellite telemetry, tracking, and command (TT&C) applications. Provides 10 carrier...45112- SKU:
- 45112
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 55.00 LBS
- Brand:
- GE (General Electric / American Communications)
- Model:
- SM-TT&C Carrier Kill Switch
- MPN:
- SMP-508
- Secondary Model:
- TRMS50M
- Type:
- RF Coaxial Carrier Kill Switch Matrix
- SKU:
- 45112
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes 20x TRMS50M and 3x T1-113E4M-1 Trans-Tel RF coaxial switches, 28VDC
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rackmount
- Power Requirements:
- 117VAC; internal 24V redundant DC power supplies
- Switch Voltage:
- 28VDC
- RF Switch Model 1:
- Trans-Tel TRMS50M (Qty: 20), 28VDC, DC–12GHz
- RF Switch Model 2:
- Trans-Tel T1-113E4M-1 (Qty: 3), 28VDC
- Manufacturer – RF Switches:
- Trans-Tel Division of U-Z Mfg., Santa Monica, CA
- Matrix Panel MPN:
- SMP-508
- Matrix Panel Manufacturer:
- Sector Motor Industries, Deer Park, NY
- Matrix Panel IDENT:
- 53263
- Matrix Panel Voltage:
- 117VAC
- Redundant Power Supplies:
- Yes – 24V, Dual (A & B)
- Connector Types – Rear:
- BNC (Kill Switches IN/OUT), DB9, D-sub connectors
- Number of Kill Switch Channels:
- 10 (labeled 1–10 on rear panel)
- Application:
- Satellite TT&C (Telemetry, Tracking & Command) RF carrier switching
- Patent:
- U.S. Patent 3,970,980
- Condition Notes:
- GE SM-TT&C Carrier Kill Switch pulled from a working environment, inspected and in good condition. Interior RF switch modules intact. Some oxidation on PS1/PS2 connectors. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$700.00Was: $1,400.00 -
Aydin 3053 Demodulator Bit Sync 356-0313-502 4-Ch RS-232 IEEE-488 19" Rack
Aydin
$400.00Was: $800.00Aydin 3053 Demodulator Bit Sync 356-0313-502 4-Ch RS-232 IEEE-488 19" RackThe Aydin 3053 is a 19-inch rackmount PCM telemetry demodulator and bit synchronizer manufactured by Aydin Computer and...45079- SKU:
- 45079
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 33.00 LBS
- Brand:
- Aydin
- Model:
- 3053
- MPN:
- 356-0313-502
- Type:
- Demodulator / Bit Synchronizer
- SKU:
- 45079
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes 3x Aydin 460-2443-505 circuit cards and 1x Aydin 460-2444-502 controller card
- Country/Region of Manufacture:
- United States
- Form Factor:
- 19" Rackmount
- Number of Channels:
- 4
- Interface Type:
- RS-232, RS-449, IEEE-488 (GPIB), TTL, BNC
- Rear Connectors:
- IEEE-488 (J4), RS-232 (J3), RS-449 (J2), AC PWR (J1), BNC
- Included Cards:
- 3x Aydin 460-2443-505 circuit card; 1x Aydin 460-2444-502 controller card
- Manufacturer Division:
- Aydin Computer and Monitor Division
- CAGE Code:
- 20747
- Manufacture Date:
- April 1996 (4-96 per label)
- Compatible With:
- Telemetry / satellite ground station systems
- Front Panel Controls:
- Data Entry keypad, PAGE, RESET, FCTN, ENTER; STATUS, REMOTE LEDs
- Front Panel Indicators:
- LOCK, CHANNEL, LOSS per channel (4 channels); POWER switch
- Display:
- LED/Vacuum fluorescent display (no readout — not functional)
- Application:
- PCM telemetry demodulation and bit synchronization
- Condition Notes:
- Aydin 3053 Bit Sync Demodulator P/N 356-0313-502 powers on but has no front panel display readout. Sold as-is for parts or repair — no functionality guarantee. Includes 3x 460-2443-505 circuit cards and 1x 460-2444-502 controller card.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00 -
Accuprobe IK2B10D3D Kelvin Probe Assembly Z-Adjust BeCu 15mil In-Line Blade
Accuprobe Inc
$200.00Was: $525.00Accuprobe IK2B10D3D Kelvin Probe Assembly Z-Adjust BeCu 15mil In-Line BladeKelvin-type probe assembly for four-wire low-resistance measurements. Features z-adjustable beryllium copper needle with...44980- SKU:
- 44980
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Accuprobe
- Model:
- IK2B10D3D
- MPN:
- IK2B10D3D
- SKU:
- 44980
- Type:
- Kelvin-Type Z-Adjustable Probe Assembly
- Blade Type:
- In-Line
- Blade Length:
- Long
- Needle Material:
- Beryllium Copper (BeCu)
- Needle Diameter:
- 15 mils (0.381 mm)
- Tip Length:
- 60 mils (1.524 mm)
- Needle Extension:
- 350 mils (8.89 mm)
- Tip Spacing:
- 15 mils (0.381 mm)
- Adjustability:
- Z-Adjustable
- Measurement Type:
- Kelvin (4-wire resistance / low-resistance)
- RoHS Compliant:
- Yes — Lead Free / RoHS Comp
- Seller Notes:
- Single unit; box label shows qty 3 but only 1 unit is included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Accuprobe IK2B10D3D Kelvin Probe Assembly inspected and in good used condition. Pulled from a working environment. Yellow body, wire, and BeCu needle intact. Note: box says qty 3 — only 1 unit included. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $525.00 -
37U 19" Rackmount Server Cabinet Enclosure No Door 2x Sanyo Denki 120W Fans
SWDP
$400.00Was: $800.0037U 19" Rackmount Server Cabinet Enclosure No Door 2x Sanyo Denki 120W FansFloor-standing 37U rackmount cabinet designed to house standard 19" EIA-310 compatible equipment. Equipped with two...44922- SKU:
- 44922
- Availability:
- This item requires freight shipping. Contact us for a freight quote before purchasing.
- Weight:
- 190.00 LBS
- Brand:
- Unbranded
- Model:
- SWDP
- MPN:
- SWDP
- Type:
- 19" Rackmount Server Cabinet Enclosure
- SKU:
- 44922
- Condition:
- Used – Pulled from Working Environment
- Rack Size:
- 37U
- Form Factor:
- Floor Standing Rack Enclosure
- Rack Width:
- 19"
- Interior Dimensions:
- 17.75" W x 29" D x 66" H
- Number of Cooling Fans:
- 2
- Fan Model:
- Sanyo Denki SanAce 9WG1224G101
- Fan Power:
- 120W each
- Fan Placement:
- Roof-Mounted
- Door Configuration:
- No Door
- Color:
- Black
- Compatible With:
- Standard 19" EIA-310 rackmount equipment
- Shipping Method:
- Freight required
- Seller Notes:
- Includes 2x Sanyo Denki SanAce 120W roof-mounted cooling fans. No door. Freight shipping required.
- Country/Region of Manufacture:
- Unknown
- Condition Notes:
- This 37U 19" rackmount cabinet has been inspected and is in good used condition. Pulled from a working data center environment. Rails, brackets, and 2x Sanyo Denki 120W roof fans intact. No door included. Freight shipping required.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$400.00Was: $800.00