Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single
Schaffner
$28.00Was: $60.00Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single PhaseSingle-phase EMI line filter designed to suppress electromagnetic interference on AC power lines. Features a 2-stage...46000- SKU:
- 46000
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Schaffner
- Model:
- FN2070-10-06
- MPN:
- FN2070-10-06
- Type:
- Single-Phase EMI Line Filter
- SKU:
- 46000
- Voltage Rating:
- 110/250VAC
- Current Rating:
- 10A
- Frequency:
- 50-60Hz
- Phase:
- Single Phase
- Standards Compliance:
- IEC960 Compatible
- Certifications:
- UL, CE
- Topology:
- 2-stage LC filter with common-mode chokes
- Inductance:
- 2x4.5mH (line/neutral)
- Capacitance:
- 1uF x2 (line-side), 1uF x2 (load-side), 2x4.7nF (Y-cap)
- Leakage Resistance:
- 220kOhm
- Connector Type:
- Faston / Quick-Connect Blade Terminals
- Country/Region of Manufacture:
- Switzerland
- Form Factor:
- Chassis Mount / Panel Mount
- Seller Notes:
- Filter only; no mounting hardware included.
- Condition Notes:
- Schaffner FN2070-10-06 10A EMI line filter in good used condition. Pulled from a working environment. Housing shows light surface wear. Terminals are clean and intact. No damage noted.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Crydom H12WD4850-5727 SSR Zero Cross Relay Panel 480V 90A w/ Stainless Heatsink
Crydom
$600.00Was: $1,200.00Crydom H12WD4850-5727 SSR Zero Cross Relay Panel 480V 90A w/ Stainless HeatsinkThis is an assembly of 10 Crydom H12WD4850-5727 solid state relays mounted on a large 42" x 8" stainless steel heatsink...45999- SKU:
- 45999
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Crydom
- Model:
- H12WD4850-5727
- MPN:
- H12WD4850-5727
- Type:
- Solid State Relay Panel Assembly
- SKU:
- 45999
- Switching Type:
- Zero Cross (Zero Switching)
- Output Voltage:
- 480V AC
- Output Current:
- 90A
- Input Voltage (Control):
- 5-32V DC
- Number of Relays:
- 10
- Relay Series:
- H12WD4850
- Heatsink Material:
- Stainless Steel
- Heatsink Dimensions:
- 42 x 8 inches
- Mounting:
- Panel / Heatsink Mounted
- Phase:
- Single Phase
- Thermal Protection:
- Thermal cutout / thermostat (visible on heatsink)
- Condition:
- Used – Inspected
- Seller Notes:
- Includes 10 Crydom H12WD4850-5727 SSRs mounted on 42x8 stainless steel heatsink with wiring harness
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Crydom H12WD4850-5727 SSR relay panel, used, inspected. 10 relays intact on stainless heatsink, wiring harness present. Not bench-tested at our facility; pulled from working environment. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Varian Klystron 10KV RF Power Supply HV DC Rectifier Control Board 01-000040
Varian
$250.00Was: $500.00Varian Klystron 10KV RF Power Supply HV DC Rectifier Control Board 01-000040High voltage DC rectifier control board for Varian Klystron 10KV RF power supplies. This board handles rectification and...45998- SKU:
- 45998
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 35.00 LBS
- Brand:
- Varian
- Model:
- 01-000040
- MPN:
- 01-000040
- Type:
- High Voltage DC Rectifier Control Board
- SKU:
- 45998
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a Varian Klystron 10KV RF Power Supply
- Compatible With:
- Varian Klystron 10KV RF Power Supply
- Application:
- Klystron RF Power Supply High Voltage Rectification
- Form Factor:
- Card / Board / Module
- Power Requirements:
- 117V, 50-60Hz (Stancor P-8657 primary transformer)
- Voltage Rating:
- 10KV HV DC Output
- Key Components:
- Stancor P-8657 transformer, Sprague Analytix capacitor 35V
- Relay:
- AMF Potter & Brumfield relay (visible on board)
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian Klystron 10KV RF Power Supply HV DC Rectifier Control Board, part 01-000040. Pulled from a working Varian Klystron RF Power Supply. Inspected; good used condition. Cosmetic aging and paint residue on reverse side. All major components present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
Standard Power SPS 120-15 DC Power Supply 15V 8A 115/230VAC 01-101559-00 E
Standard Power
$45.00Was: $90.00Standard Power SPS 120-15 DC Power Supply 15V 8A 115/230VAC 01-101559-00 EThe Standard Power SPS 120-15 is an open-frame linear DC power supply made by Standard Power, Inc. of Santa Ana, California...45976- SKU:
- 45976
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 19.00 LBS
- Brand:
- Standard Power
- Model:
- SPS 120-15
- MPN:
- 01-101559-00 E
- SKU:
- 45976
- Type:
- Linear DC Power Supply
- Output Voltage:
- 15V DC
- Output Current:
- 8.0A
- Input Voltage:
- 115/230V AC
- Input Frequency:
- 47-440 Hz
- Number of Outputs:
- 1
- Form Factor:
- Open Frame
- Output Connector/Terminal:
- Screw terminal (V+/S+, S-/V-)
- Input Terminal:
- Screw terminal (1/3 and 2/4)
- Dimensions:
- 7" x 5" x 5"
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Bench-tested good; unit only, no accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Standard Power SPS 120-15 DC power supply bench-tested good at our facility. Inputs 115VAC on 1/3 and 2/4 terminals; outputs rated 15VDC on V+/S+ and S-/V- terminals. Normal cosmetic wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Standard Power 15B24H 24V 0.6A Power Supply 01-101167-08 R 115/230V 50/60Hz
Standard Power
$45.00Was: $90.00Standard Power 15B24H 24V 0.6A Power Supply 01-101167-08 R 115/230V 50/60HzLinear AC to DC power supply converting 115/230V AC input to 24V DC output at 0.6A. Open-frame, panel-mount construction...45944- SKU:
- 45944
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Standard Power
- Model:
- 15B24H
- MPN:
- 01-101167-08 R
- Secondary Model:
- 01-101167-08 R
- Type:
- Linear AC to DC Power Supply
- SKU:
- 45944
- Output Voltage:
- 24V DC
- Output Current:
- 0.6A
- Input Voltage:
- 115/230V AC
- Frequency:
- 50/60 Hz
- Number of Outputs:
- 1
- Form Factor:
- Open Frame / Panel Mount
- Seller Notes:
- Includes bare lead wiring harness; no enclosure.
- Country/Region of Manufacture:
- United States
- Compatible With:
- Acme Electric Corp OEM equipment; industrial control systems
- Manufacturer Notes:
- Subsidiary of Acme Electric Corp, Lumberton, CA
- Condition Notes:
- Standard Power 15B24H 24V 0.6A power supply has been inspected and is in good used condition. Open-frame assembly; transformer shows surface oxidation typical of age. Wire leads intact. No enclosure included. See photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Standard Power SPS 15-15 Power Supply 115/230V 47-440Hz 15V 0.7A Acme Electric
Standard Power
$35.00Was: $70.00Standard Power SPS 15-15 Power Supply 115/230V 47-440Hz 15V 0.7A Acme ElectricThe Standard Power SPS 15-15 is a compact open-frame linear power supply designed for embedded and chassis-mount...45942- SKU:
- 45942
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Standard Power
- Model:
- SPS 15-15
- MPN:
- 01-301568-00 A1
- Secondary Model:
- 0744-929 52571 H4
- Type:
- Open-Frame Linear Power Supply
- SKU:
- 45942
- Input Voltage:
- 115/230V AC
- Input Frequency:
- 47-440 Hz
- Output Voltage:
- 15V DC
- Output Current:
- 0.7A
- Number of Outputs:
- 1
- Form Factor:
- Open Frame / Chassis Mount
- Enclosure Color:
- Blue
- Manufacturer:
- Standard Power Inc. (subsidiary of Acme Electric Corp.)
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Open-frame unit only; no enclosure or external cables included.
- Condition Notes:
- Standard Power SPS 15-15 power supply inspected and in good used condition. Chassis and transformer show age-related patina consistent with prior industrial use. PCB and components appear intact. Not powered at our facility. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Standard Power SPS 40-5 Linear Power Supply 115/220V 47-400Hz 5V 5.0A Open Frame
Standard Power
$40.00Was: $80.00Standard Power SPS 40-5 Linear Power Supply 115/220V 47-400Hz 5V 5.0A Open FrameThe Standard Power SPS 40-5 is an open-frame linear regulated DC power supply manufactured by Standard Power Inc., a...45936- SKU:
- 45936
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Standard Power
- Model:
- SPS 40-5
- MPN:
- 01-300922-00 C2
- SKU:
- 45936
- Type:
- Linear Open-Frame Power Supply
- Input Voltage:
- 115/220V AC
- Input Frequency:
- 47-400Hz
- Output Voltage:
- 5V DC
- Output Current:
- 5.0A
- Output Power:
- 25W
- Number of Outputs:
- 1
- Phase:
- Single Phase
- Form Factor:
- Open Frame
- Seller Notes:
- Unit only — no additional accessories included
- Parent Company:
- Acme Electric Corp.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Standard Power SPS 40-5 power supply has been tested and is in good working order. Shows surface soiling and transformer oxidation typical of prior service use. PCB, heatsink, and capacitor intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
Monroe Electronics 267 Buried Layer Tester w/ Sample Plate Carrying Case
Monroe Electronics
$65.00Was: $125.00Monroe Electronics 267 Buried Layer Tester w/ Sample Plate Carrying CaseHandheld buried layer and electrostatic charge tester manufactured by Monroe Electronics. Features an analog meter display for...45919- SKU:
- 45919
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Monroe
- Model:
- 267
- MPN:
- 267
- Type:
- Buried Layer Tester
- SKU:
- 45919
- Seller Notes:
- Missing 11.6VDC 45mA charger/adapter and manual. Includes sample plate and carrying case.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Handheld / Portable
- Power Requirements:
- 11.6VDC 45mA (charger/adapter not included)
- Display Type:
- Analog Meter
- Measurement Type:
- Buried Layer / Electrostatic Charge
- Included Accessories:
- Sample plate, black carrying case
- Missing Items:
- 11.6VDC 45mA power supply/charger; operating manual
- Condition Notes:
- Monroe Electronics 267 Buried Layer Tester sold as-is — missing 11.6VDC 45mA power supply/charger and manual. Not tested. Includes sample plate and carrying case. For parts or repair only, no functionality guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Foxboro E99-FAIN pH Transmitter 4-20mA Output 120VAC 60Hz 8.5W CS-E/FN-A
Foxboro
$275.00Was: $550.00Foxboro E99-FAIN pH Transmitter 4-20mA Output 120VAC 60Hz 8.5W CS-E/FN-AIndustrial pH transmitter for continuous monitoring and measurement of pH levels in process streams. Outputs 4-20mA signal for...45857- SKU:
- 45857
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 26.00 LBS
- Brand:
- Foxboro
- Model:
- E99-FAIN
- MPN:
- E99-FAIN
- Type:
- pH Transmitter
- SKU:
- 45857
- Cert Spec:
- CS-E/FN-A
- Output Signal:
- 4-20 mA
- Input Voltage:
- 120V AC, 60Hz
- Power Consumption:
- 8.5W / 9.5VA
- Calibration Range:
- 4-14 pH
- Fuse Rating:
- 0.25A
- Alarm Contact Output (DC):
- DC-28W / 250V / 3A Resistive
- Alarm Contact Output (AC):
- AC-100VA / 176V / 3A Resistive
- Measurement Type:
- pH
- Form Factor:
- Benchtop / Wall Mount
- Condition:
- Used – Powers On, Meter Responds; Further Testing Limited
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Unit only — no probe or accessories included.
- Condition Notes:
- Foxboro E99-FAIN pH Transmitter powers on with 120VAC — analog meter responds on startup. Full testing not possible (no probe available). Enclosure shows surface dirt and wear. Internal PCBs appear intact. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Keithley PC 6292 14026 REV C MAI-16 I/O Controller Board FSI Semiconductor
Keithley
$200.00Was: $400.00Keithley PC 6292 14026 REV C MAI-16 I/O Controller Board FSI Semiconductor Multi-channel I/O controller board designed for FSI semiconductor processing units. Manages analog and digital input/output...45788- SKU:
- 45788
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Keithley
- Model:
- PC 6292
- MPN:
- 14026
- Secondary Model:
- MAI-16
- Hardware Revision:
- REV C
- Type:
- I/O Controller Board
- SKU:
- 45788
- Condition:
- Used – Pulled from Working Environment
- Form Factor:
- PCB / Card Module
- Compatible With:
- FSI Semiconductor Processing Unit
- Application:
- Semiconductor Process Control, I/O Control
- Interface Type:
- Multi-channel analog/digital I/O
- ICs / Chipset:
- Motorola SN74LS32N, ST 74LS157B1
- Seller Notes:
- Board only; pulled from FSI semiconductor unit
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Keithley PC 6292 14026 REV C MAI-16 I/O Controller Board. Pulled from a working FSI semiconductor unit; inspected and in good condition. Board is clean with intact components and terminal blocks.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Keithley PC 6292 Rev B Metrabus A/D Board 62900 9310/K 5192 I/O Card
Keithley
$74.00Was: $274.00Keithley PC 6292 Rev B Metrabus A/D Board 62900 9310/K 5192 I/O Card The Keithley PC 6292 is an analog-to-digital (A/D) input/output board designed for use with Keithley's Metrabus data acquisition...45766- SKU:
- 45766
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Keithley
- Model:
- PC 6292
- MPN:
- 62900 9310/K
- Secondary Model:
- 5192
- Hardware Revision:
- Rev B
- Type:
- Analog-to-Digital (A/D) I/O Expansion Board
- SKU:
- 45766
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a working Metrabus system environment
- Form Factor:
- Card / Module (PCB)
- Bus Interface:
- Metrabus
- Interface Type:
- Metrabus
- Application:
- Data Acquisition, Analog Input, I/O Expansion
- Compatible With:
- Keithley Metrabus Data Acquisition Systems
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Keithley PC 6292 Rev B Metrabus A/D Board (62900 9310/K) inspected and in good used condition. Pulled from a working environment where it was in active use. PCB shows normal wear; all components and connectors appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$74.00Was: $274.00 -
RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom Microwave
Blue
$65.00Was: $125.00RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom MicrowaveRF coaxial isolator designed to provide signal isolation in microwave and satcom systems. Routes RF signals between N-type and...45692- SKU:
- 45692
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- 110715-01
- MPN:
- 110715-01
- Secondary Model:
- 27338
- Part Number 2:
- 101103981
- SKU:
- 45692
- Type:
- RF Coaxial Isolator
- Condition:
- Used – Pulled from Working Environment
- Connector 1 (IN):
- N-Type Female
- Connector 2 (OUT):
- SMA Female
- Application:
- Satcom, Microwave, RF Signal Isolation
- Form Factor:
- Compact Block / Inline Module
- Color:
- Blue
- Seller Notes:
- Unit only — no additional accessories included.
- Condition Notes:
- RF Coaxial Isolator 110715-01 / 27338 inspected and in good used condition. Pulled from a working satcom/microwave environment. Body shows light wear; N-type and SMA connectors intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave Component
Blue
$45.00Was: $90.00RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave ComponentRF coaxial isolator designed to provide one-way signal transmission while blocking reverse signals in RF and microwave systems...45685- SKU:
- 45685
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- 27338
- MPN:
- 110715-02
- Secondary Model:
- 110715-02-101104345
- SKU:
- 45685
- Type:
- RF Coaxial Isolator
- Connector Type:
- SMA
- Body Color:
- Blue
- Application:
- Satcom, Microwave, RF Systems
- Form Factor:
- Inline / Block Module
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only — no additional accessories included
- Condition Notes:
- RF Coax Isolator 27338 / 110715-02 pulled from a working satcom environment, inspected and in good used condition. Blue body shows minor surface wear. SMA connectors intact with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector Satcom
Blue
$35.00Was: $70.00WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector SatcomCoaxial RF isolator used in satellite communications and microwave RF applications. The unit provides isolation between...45684- SKU:
- 45684
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- WMI
- Model:
- WMI16453
- MPN:
- WMI16453
- Secondary Model:
- 2JX-8351-C-1
- SKU:
- 45684
- Type:
- Coaxial RF Isolator
- Connector Type 1:
- SMA (female, top port)
- Connector Type 2:
- N-Type (female, side port)
- Port Configuration:
- SMA top (port), N-type side (IN/OUT labeled)
- Housing Color:
- Blue anodized aluminum
- Application:
- Satellite Communications (Satcom), Microwave RF
- Form Factor:
- Compact Block / Drop-in
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working satcom environment, inspected, good condition.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- WMI WMI16453 coaxial RF isolator pulled from a working satcom environment, inspected and in good used condition. Blue housing shows minor surface wear and paint chips. SMA and N-type connectors intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
RYT Industries 201517 RF Microwave Isolator SMA Coaxial Ferrite Component
RYT
$35.00Was: $70.00RYT Industries 201517 RF Microwave Isolator SMA Coaxial Ferrite ComponentThis is a two-port RF microwave ferrite isolator designed to provide signal isolation in coaxial systems. The unit uses SMA...45683- SKU:
- 45683
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- RYT Industries
- Model:
- 201517
- MPN:
- 201517
- Type:
- RF Microwave Ferrite Isolator
- SKU:
- 45683
- Connector Type:
- SMA (Female)
- Number of Ports:
- 2
- Form Factor:
- Connectorized / Drop-in
- Body Style:
- Compact Square Blue Aluminum Housing
- Seller Notes:
- Unit only; pulled from a working environment
- Application:
- RF / Microwave Signal Isolation
- Country/Region of Manufacture:
- United States
- Condition Notes:
- RYT Industries 201517 RF microwave isolator in good used condition. Pulled from a working environment where it was in active use. SMA connectors appear clean. Light surface wear on housing. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Omron G3FM-2R5 SLN Solid State Relay & G6B-1114P HH52PW-L PYFO8A DIN Rail
Omron
$65.00Was: $125.00Omron G3FM-2R5 SLN Solid State Relay & G6B-1114P HH52PW-L PYFO8A DIN RailThis is a used relay assembly mounted on DIN rail, combining solid state relays (SSR) with electromechanical relays for...45676- SKU:
- 45676
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Omron
- Model:
- G3FM-2R5 SLN
- MPN:
- G3FM-2R5
- Type:
- Solid State Relay Assembly
- SKU:
- 45676
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Assembly includes 5x G3FM-2R5, 5x HH52PW-L, 10x PYFO8A, 4x G6B-1114P on DIN rail
- Country/Region of Manufacture:
- Japan
- Form Factor:
- DIN Rail Mount
- Relay Type:
- Solid State Relay (SSR)
- Load Voltage Rating:
- 250VAC / 125VDC
- Load Current Rating:
- 0.5A
- Coil Voltage:
- 24VDC
- Contact Rating:
- 5A 250VAC, 5A 30VDC
- Number of Relays:
- 5x G3FM-2R5 SSR + 4x G6B-1114P
- Socket / Base Model:
- PYFO8A (Omron)
- Compatible Relay Socket:
- PYFO8A
- Secondary Components:
- 5x Fuji Electric HH52PW-L relays
- Mounting Type:
- DIN Rail
- Input Type:
- DC Input
- Condition Notes:
- Omron G3FM-2R5 SLN relay assembly inspected and in good used condition. All relays seated, DIN rail intact, no cracked housings or damaged terminals observed. Normal light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter Japan
TDK
$28.00Was: $60.00TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter JapanThe TDK ZCW2210-01 is a panel-mount EMI/RFI noise filter designed to suppress conducted electromagnetic interference on AC power...45664- SKU:
- 45664
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- TDK
- Model:
- ZCW2210-01
- MPN:
- ZCW2210-01
- Type:
- EMI / RFI Noise Filter
- SKU:
- 45664
- Voltage Rating (WV):
- 250V AC
- Current Rating:
- 10A
- Test Voltage (TV):
- 1500V AC
- Lot Number:
- KK 9907
- Country/Region of Manufacture:
- Japan
- Manufacturer:
- TDK Corporation
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; no accessories included.
- Form Factor:
- Panel / Chassis Mount
- Terminals:
- 3-phase terminal configuration (R, S, T / line and load)
- Connection Type:
- Screw terminal (through-body conductors)
- Condition Notes:
- TDK ZCW2210-01 Noise Filter inspected and in good used condition. Housing is clean with minor surface marks. Label intact and legible. Terminal conductors present and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3A
Olson
$55.00Was: $100.00Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3AThe Olson 3908 Data Protector is a mains-line RF filter combined with spike and transient suppression, designed to clean...45628- SKU:
- 45628
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Olson Electronics
- Model:
- 3908
- MPN:
- 3908
- Type:
- Mains RF Filter / Spike & Transient Suppressor
- SKU:
- 45628
- Voltage Rating:
- 250V AC
- Current Rating:
- 6.3A Maximum
- Fuse Rating:
- 6.3A
- Number of Outlets:
- 8
- Outlet Type:
- IEC C13
- Features:
- RF/EMI filtering, spike suppression, transient suppression
- Power Indicator:
- Red pilot light on front panel
- Form Factor:
- Rackmount / Panel-Mount Strip
- Country/Region of Manufacture:
- United Kingdom
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; inspected and in good condition.
- Condition Notes:
- Olson 3908 Mains RF Filter inspected and in good condition. Aluminum housing is clean, front panel label clear, 8x IEC C13 outlets intact. Normal light use. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Advanced Energy MDX Pinnacle 8kW DC Power Supply B5181854DD 400V 3-Phase
Advanced Energy
$1,600.00Was: $3,200.00Advanced Energy MDX Pinnacle 8kW DC Power Supply B5181854DD 400V 3-PhaseThe Advanced Energy MDX Pinnacle is a high-power DC magnetron drive power supply designed for physical vapor deposition (PVD)...45576- SKU:
- 45576
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 55.00 LBS
- Brand:
- Advanced Energy
- Model:
- MDX Pinnacle
- MPN:
- B5181854DD
- Secondary Model:
- 3152352-122C
- Type:
- DC Magnetron Drive Power Supply
- SKU:
- 45576
- Output Power:
- 8 kW pulsed
- Input Voltage:
- 400V AC
- Input Current:
- 22A
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Form Factor:
- Rack Mount
- Interface:
- Profibus Port, Remote (DB9), RS-232
- Output Configuration:
- 3-pole output terminal block (L1, L2, L3, N)
- Certifications:
- CE
- Application:
- PVD Sputtering, Thin Film Deposition, Plasma Etch
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only — no additional accessories confirmed included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Advanced Energy MDX Pinnacle 8kW DC power supply, P/N B5181854DD. Inspected and in good condition; pulled from a working environment where it was in active use. Normal surface wear. Rear ports and terminals intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,600.00Was: $3,200.00 -
Varian VUJ-8527-01 C-Band Microwave Waveguide Load Metering Assembly 5.925-6.425
Varian
$325.00Was: $650.00Varian VUJ-8527-01 C-Band Microwave Waveguide Load Metering Assembly 5.925-6.425 GHzC-Band waveguide load metering assembly for microwave signal measurement and termination. Features three output...45561- SKU:
- 45561
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 35.00 LBS
- Brand:
- Varian
- Model:
- VUJ-8527-01
- MPN:
- VUJ-8527-01
- Type:
- C-Band Microwave Waveguide Load Metering Assembly
- SKU:
- 45561
- Frequency Range:
- 5.925 – 6.425 GHz (C-Band)
- Number of Ports:
- 3
- Frequency Band:
- C-Band
- Waveguide Type:
- Rigid
- Port 1 Insertion Loss (dB):
- 50.5–50.7 dB across 5.925–6.425 GHz
- Port 2 Insertion Loss (dB):
- 53.2–53.4 dB across 5.925–6.425 GHz
- Port 3 Insertion Loss (dB):
- 60.6–60.8 dB across 5.925–6.425 GHz
- Waveguide Flange:
- CPR-137G / rectangular waveguide flange (brass)
- Heatsink / Load Assembly:
- Finned black anodized aluminum heatsink load
- Manufacturer Division:
- Varian Microwave Equipment Division
- FSCM:
- 59782
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected, not bench-tested
- Seller Notes:
- Assembly only; inspected and in good condition, not tested at facility
- Condition Notes:
- Varian VUJ-8527-01 C-Band Waveguide Load Metering Assembly. Inspected, good used condition. Not tested at our facility. Assembly complete with heatsink load, brass flange, clamp, and calibration labels. Minor surface scuffs.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$325.00Was: $650.00