Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
ESI 83562 ±15V Plug-In Power Supply Module 983562 Rev K 115/230V 47-440Hz
ESI
$100.00Was: $200.00ESI 83562 ±15V Plug-In Power Supply Module 983562 Rev K 115/230V 47-440HzPlug-in power supply module that delivers ±15V DC output. Accepts 115/230V AC input across a wide frequency range of 47–440Hz,...46371- SKU:
- 46371
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 19.00 LBS
- Brand:
- ESI
- Model:
- 83562
- MPN:
- 983562
- Secondary Model:
- SPS 60-15
- Hardware Revision:
- Rev K
- Type:
- Plug-In Power Supply Module
- Output Voltage:
- ±15V DC
- Input Voltage:
- 115/230V AC
- Input Frequency:
- 47–440Hz
- Form Factor:
- Plug-In Module
- Connector Type:
- Multi-pin card-edge / plug-in connector
- Country/Region of Manufacture:
- United States
- SKU:
- 46371
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Module only; pulled from working environment; no accessories included
- Condition Notes:
- ESI 83562 ±15V plug-in power supply module, pulled from a working environment and inspected. Chassis shows minor handling wear. Internal components and rear plug-in connector appear intact. No significant damage observed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00 -
Sprague Electric 99ZSPA44133 Toroidal Reactor Inductor Coil V8406 Electronic
Sprague Electric
$18.00Was: $40.00Sprague Electric 99ZSPA44133 Toroidal Reactor Inductor Coil V8406 ElectronicToroidal reactor inductor manufactured by Sprague Electric. This component functions as an electromagnetic device for...46309- SKU:
- 46309
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Sprague Electric
- Model:
- 99ZSPA44133
- MPN:
- 99ZSPA44133
- Type:
- Toroidal Reactor / Inductor
- SKU:
- 46309
- Date Code:
- V8406
- Form Factor:
- Toroidal / Cylindrical Body
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Single unit; inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Sprague Electric 99ZSPA44133 toroidal reactor/inductor. Inspected and in good condition. Clean body, no cracks or damage. Date code V8406 clearly legible. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
Filter Concepts 3E20-F 3X20A EMI Filter 3-Phase 250/440VAC 50/60Hz 20A
Filter Concepts
$75.00Was: $150.00Filter Concepts 3E20-F 3X20A EMI Filter 3-Phase 250/440VAC 50/60Hz 20AThe Filter Concepts 3E20-F is a three-phase EMI/RFI line filter rated at 20 amps per phase (3×20A) and designed for use on...46286- SKU:
- 46286
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Filter Concepts
- Model:
- 3E20-F
- MPN:
- 3E20-F
- Type:
- 3-Phase EMI / RFI Line Filter
- SKU:
- 46286
- Voltage Rating:
- 250/440VAC
- Current Rating:
- 20A per phase (3x20A)
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Number of Phases:
- 3
- Connector / Terminal Type:
- Screw terminals (stud-style), labeled A, B, C, N
- Form Factor:
- Panel Mount / Chassis Mount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Filter Concepts 3E20-F 3-Phase EMI Filter in good used condition. Pulled from a working environment. Enclosure shows surface oxidation and shop wear. Stud terminals intact. Rating label legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Lambda LUS-9A-5 DC Power Supply 5V 5A 37W AC 85-132V or DC 110-165V DIN Rail
Lambda
$55.00Was: $100.00Lambda LUS-9A-5 DC Power Supply 5V 5A 37W AC 85-132V or DC 110-165V DIN RailThe Lambda LUS-9A-5 is a compact enclosed industrial DC power supply delivering a regulated 5V DC output at up to 5.0A...46281- SKU:
- 46281
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Lambda
- Model:
- LUS-9A-5
- MPN:
- LUS-9A-5
- Type:
- Industrial DC Power Supply
- SKU:
- 46281
- Output Voltage:
- 5V DC (±5% adjustable)
- Output Current:
- 5.0A Max
- Power Rating:
- 37 Watts
- Input Voltage (AC):
- 85-132V AC
- Input Voltage (DC):
- 110-165V DC
- Input Frequency:
- 47-440Hz
- Number of Outputs:
- 1
- Output Voltage Adjustment:
- V.ADJ trimmer (H/+ adjustment)
- Indicators:
- DC ON LED indicator
- Certifications:
- UL Listed, CSA
- Country/Region of Manufacture:
- Singapore
- Form Factor:
- Open Frame / Enclosed Chassis
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working environment
- Condition Notes:
- Lambda LUS-9A-5 5V DC power supply. Pulled from a working environment; inspected and in good used condition. Chassis and terminals are clean with light surface wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Dickson KTX Temperature Chart Recorder C412 8" 0-100°F Circular No Probe
Dickson
$55.00Was: $100.00Dickson KTX Temperature Chart Recorder C412 8" 0-100°F Circular No ProbeCircular chart recorder for continuous temperature monitoring using 8-inch paper charts. Records data across a 0–100°F range...46271- SKU:
- 46271
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Dickson
- Model:
- KTX
- MPN:
- KTX
- Type:
- Circular Chart Recorder
- SKU:
- 46271
- Chart Size:
- 8 inch (C412)
- Chart Range:
- 0–100°F (0/100 7D)
- Recording Medium:
- Circular paper chart
- Display Type:
- LCD digital display
- Power Requirements:
- AC/DC adapter (generic included)
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop / Wall-mount
- Measurement Type:
- Temperature
- Probe Included:
- No
- Keys Included:
- No
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Powers on and homes; possible chart rotation issue. Includes AC/DC adapter. No probe, no keys.
- Compatible Chart:
- Dickson C412 8" circular chart
- Application:
- Temperature monitoring, cold storage, lab, industrial environment
- Condition Notes:
- Dickson KTX circular chart recorder powers on and homes but may have chart rotation issues. Sold as-is, no probe, no keys. Generic AC/DC adapter included. LCD shows Prob error. No functionality guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
ELCO K150A-12 Open Frame Power Supply 12V 13A 200W AC 85-132V Made in Japan
ELCO
$45.00Was: $90.00ELCO K150A-12 Open Frame Power Supply 12V 13A 200W AC 85-132V Made in JapanOpen frame switching power supply rated for 12V DC output at 13A maximum load. Accepts AC input voltage between 85–132V and...46238- SKU:
- 46238
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- ELCO
- Model:
- K150A-12
- MPN:
- K150A-12
- SKU:
- 46238
- Type:
- Open Frame Switching Power Supply
- Output Voltage:
- 12V DC
- Output Current:
- 13A
- Maximum Output Power:
- 200W
- Input Voltage:
- AC 85–132V
- Number of Outputs:
- 1
- Form Factor:
- Open Frame / PCB Mount
- Output Connector Type:
- Terminal Block
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Inspected, cover missing
- Seller Notes:
- Top cover is missing; PCB and components are present and intact.
- Condition Notes:
- ELCO K150A-12 12V 13A open frame power supply. Inspected and in good condition. Top cover is missing; PCB and components appear intact. Light handling marks. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Schaffner FN2060-16-06 EMI Line Filter 110/250VAC 16A 50-60Hz IEC EN133200
Schaffner
$25.00Was: $50.00Schaffner FN2060-16-06 EMI Line Filter 110/250VAC 16A 50-60Hz IEC EN133200The Schaffner FN2060-16-06 is a single-phase EMI/RFI mains line filter rated for 110/250VAC at up to 16 amps continuous (at...46231- SKU:
- 46231
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Schaffner
- Model:
- FN2060-16-06
- MPN:
- FN2060-16-06
- Type:
- EMI / RFI Mains Line Filter
- SKU:
- 46231
- Voltage Rating:
- 110/250VAC
- Current Rating:
- 16A
- Frequency:
- 50-60Hz
- Phase:
- Single Phase
- Filter Topology:
- Two-stage LC, 0.33µF + 0.33µF, 2x0.65mH, 2x4.7nF (Y2)
- Leakage Resistance:
- 1MOhm
- Standards Compliance:
- IEC 60950, EN133200, UL Listed
- Country/Region of Manufacture:
- Switzerland
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Form Factor:
- Chassis Mount / Panel Mount
- Connector / Terminals:
- Quick-connect (faston) blade terminals
- Condition Notes:
- Schaffner FN2060-16-06 EMI line filter in good used condition. Inspected and pulled from a working environment. Label clean and legible; chassis shows light scuffing and adhesive residue on rear. Terminals intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Keithley M1142 Voltage Signal Conditioner RS-485 +/-10V 0006 10-Pin Made in USA
Keithley
$65.00Was: $125.00Keithley M1142 Voltage Signal Conditioner RS-485 +/-10V 0006 10-Pin Made in USAThe Keithley M1142 is a compact voltage signal conditioner module designed for use in industrial data acquisition and...46229- SKU:
- 46229
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.45 LBS
- Brand:
- Keithley
- Model:
- M1142
- MPN:
- M1142
- Type:
- Voltage Signal Conditioner
- SKU:
- 46229
- Condition:
- Used – Pulled from Working Environment
- Signal Type:
- Voltage
- Voltage Range:
- +/-10V
- Interface:
- RS-485
- Connector Type:
- 10-Pin
- Configuration Code:
- 0006
- CE Certified:
- Yes
- Country/Region of Manufacture:
- United States
- Form Factor:
- Module
- Compatible With:
- Keithley KPCI, MetraByte, PLC data acquisition systems
- Seller Notes:
- Unit only; pulled from working environment, inspected.
- Condition Notes:
- Keithley M1142 Voltage Signal Conditioner, used, inspected, pulled from a working environment. Housing intact with minor scuffs. Label clean, 10-pin connector and studs present, no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Huntington Electric FSE-1000 HE11005 10 Ohm 5P Wirewound Resistor w/ Holder
Huntington Electric
$28.00Was: $60.00Huntington Electric FSE-1000 HE11005 10 Ohm 5P Wirewound Resistor w/ HolderThe Huntington Electric FSE-1000 is a tubular wirewound power resistor rated at 10 ohms with a 5% tolerance, identified by...46182- SKU:
- 46182
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Huntington Electric
- Model:
- FSE-1000
- MPN:
- HE11005
- Type:
- Wirewound Power Resistor
- SKU:
- 46182
- Resistance:
- 10 Ohm
- Tolerance:
- 5%
- Construction:
- Tubular Wirewound
- Mounting:
- Chassis Mount with Steel Holder/Bracket
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes steel mounting holder with bracket feet
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Huntington Electric FSE-1000 HE11005 10 Ohm 5P wirewound resistor. Tested and in working order. Steel mounting holder included. Light surface wear on bracket; markings fully legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
FST-1000 HE11035 10 Ohm Wire Wound Tubular Power Resistor Chassis Mount
Electrical
$49.50Was: $100.00FST-1000 HE11035 10 Ohm Wire Wound Tubular Power Resistor Chassis MountWire wound tubular power resistor rated at 10 ohms. Designed for use in industrial power control and drive systems where...46180- SKU:
- 46180
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- FST-1000
- MPN:
- HE11035
- Secondary Model:
- HE11035 5P
- Type:
- Tubular Wire Wound Power Resistor
- SKU:
- 46180
- Resistance:
- 10 Ohm
- Construction:
- Wire Wound
- Form Factor:
- Tubular / Chassis Mount
- Mounting Style:
- Chassis Mount with Bracket
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Unit includes chassis mount brackets on both ends
- Compatible With:
- Industrial power control and drive systems
- Condition Notes:
- FST-1000 HE11035 10 Ohm tubular power resistor. Inspected, good used condition. Wire wound body intact, chassis mount brackets secure, label legible. Minor surface soiling and light bracket oxidation. No damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$49.50Was: $100.00 -
Carlo Gavazzi RZ4010HDP0 3-Phase Solid State Relay Block 10A 400V 50-60Hz
Carlo Gavazzi
$40.00Was: $80.00Carlo Gavazzi RZ4010HDP0 3-Phase Solid State Relay Block 10A 400V 50-60HzThree-phase solid state relay block for switching AC loads in industrial control applications. Accepts DC control voltage and...46143- SKU:
- 46143
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Carlo Gavazzi
- Model:
- RZ4010HDP0
- MPN:
- RZ4010HDP0
- Type:
- 3-Phase Solid State Relay Block
- SKU:
- 46143
- Phase:
- Three Phase
- Voltage Rating:
- 400V AC
- Current Rating (AC1):
- 10A
- Current Rating (AC3):
- 2A
- Frequency:
- 50/60Hz
- Control Voltage:
- 10-40V DC
- Load Voltage:
- 440V AC (max)
- Number of Poles:
- 3
- Terminal Designations:
- 1/L1, 3/L2, 5/L3 (input); 2/T1, 4/T2, 6/T3 (output)
- Certifications:
- UL, CE, VDE 0660, IEC 158-2
- Mounting:
- DIN Rail / Panel Mount
- Seller Notes:
- Includes mounting base/socket. Screws included.
- Country/Region of Manufacture:
- Italy
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Carlo Gavazzi RZ4010HDP0 3-Phase SSR Block, 10A 400V. Used, inspected, pulled from a working environment. Good condition. Mounting base and screws included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
Varian M.E.D. 01-000531 3-Gang Tapped Inductor Klystron HV Power Supply CMC
Varian M.E.D.
$300.00Was: $600.00Varian M.E.D. 01-000531 3-Gang Tapped Inductor Klystron HV Power Supply CMC 1379AThree-gang tapped inductor assembly pulled from a high-voltage klystron power supply. Functions as a filter/choke in...46113- SKU:
- 46113
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Varian M.E.D.
- Model:
- 01-000531
- MPN:
- 01-000531
- Secondary Model:
- CMC 1379A
- Type:
- 3-Gang Tapped Inductor Assembly
- SKU:
- 46113
- Seller Notes:
- Pulled from a high-voltage klystron power supply. Sold as a single assembly.
- Application:
- High-voltage klystron power supply filter/choke
- Voltage Rating:
- 3.6–9.2 KV DC (source supply output range)
- Number of Cores / Gangs:
- 3
- Winding Configuration:
- Tapped (multiple tap points on terminal strip)
- Terminal Strip:
- Numbered terminal strip, approximately 20 positions per side
- Reference / Drawing Number:
- 738-8448
- Serial Number:
- 252
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian M.E.D. 01-000531 3-gang tapped inductor removed from a high-voltage klystron power supply. Good used condition — cores intact, terminal strip complete. Shows paint loss, surface oxidation, and industrial grime. No core damage visible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
Varian 01-000531-00A High Voltage Power Supply Inductor Set of 3 Klystron HV
Varian
$150.00Was: $300.00Varian 01-000531-00A High Voltage Power Supply Inductor Set of 3 Klystron HVSet of three connected inductors for high voltage klystron power supply circuits. Designed to handle DC voltages in the 3...46109- SKU:
- 46109
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Varian
- Model:
- 01-000531-00A
- MPN:
- 01-000531-00A
- Secondary Model:
- CMC 1379A
- SKU:
- 46109
- Type:
- High Voltage Power Supply Inductor
- Quantity in Set:
- 3 (connected set)
- Application:
- High Voltage Klystron Power Supply
- Voltage Range:
- 3.6–9.2 KV DC
- Configuration:
- Connected Set of 3
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Set of 3 connected inductors; removed from Varian high voltage klystron power supply
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian 01-000531-00A HV power supply inductors, set of 3, removed from a klystron power supply (3.6–9.2 KV DC). Cores and terminals intact; wiring shows typical removal wear. No additional specs available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Microlab FXR AH-06F 6dB RF Coaxial Attenuator N Male to SMA Female Adapter
Microlab FXR
$15.00Was: $30.00Microlab FXR AH-06F 6dB RF Coaxial Attenuator N Male to SMA Female Adapter Fixed coaxial RF attenuator that reduces signal power by 6dB. Designed for inline installation between RF/microwave test...46105- SKU:
- 46105
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Microlab FXR
- Model:
- AH-06F
- MPN:
- AH-06F
- Type:
- Fixed Coaxial RF Attenuator
- SKU:
- 46105
- Attenuation:
- 6 dB
- Connector 1 (Input):
- N-Type Male
- Connector 2 (Output):
- SMA Female
- Form Factor:
- In-Line / Inline Adapter
- Seller Notes:
- Attenuator only. No accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Microlab FXR AH-06F 6dB RF attenuator. Inspected and in good used condition. Light handling wear; connectors clean and intact. No damage observed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Narda 773-20 RF Attenuator DC-6GHz 20dB 5W Avg N-Type Coax Microwave Satcom
Narda
$52.00Was: $100.00Narda 773-20 RF Attenuator DC-6GHz 20dB 5W Avg N-Type Coax Microwave Satcom Fixed coaxial RF attenuator designed to reduce signal levels across DC to 6 GHz frequency range. Provides 20 dB attenuation...46103- SKU:
- 46103
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.80 LBS
- Brand:
- Narda
- Model:
- 773-20
- MPN:
- 773-20
- Type:
- Fixed Coaxial RF Attenuator
- SKU:
- 46103
- Frequency Range:
- DC to 6 GHz
- Attenuation:
- 20 dB
- Power Rating (Average):
- 5W Average
- Flatness:
- +/- 0.5 dB (3-6 GHz)
- Connector Type:
- N-Type Male to N-Type Female
- Impedance:
- 50 Ohm
- Form Factor:
- Inline / Coaxial
- Application:
- RF, Microwave, Satcom
- Patent Number:
- 3157845
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Narda 773-20 20dB DC-6GHz RF Attenuator. Inspected and in good condition. N-type connectors appear clean and undamaged. Light handling wear consistent with normal use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$52.00Was: $100.00 -
Midwest Microwave 219-20-006 RF Attenuator 20dB 14-14.5 GHz N-Type Connector
Midwest Microwave
$45.00Was: $90.00Midwest Microwave 219-20-006 RF Attenuator 20dB 14-14.5 GHz N-Type Connector The Midwest Microwave 219-20-006 is a fixed coaxial RF attenuator providing 20 dB of attenuation across the 14 to 14.5...46100- SKU:
- 46100
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Midwest Microwave
- Model:
- 219-20-006
- MPN:
- 219-20-006
- Type:
- Fixed Coaxial RF Attenuator
- SKU:
- 46100
- Attenuation:
- 20 dB
- Frequency Range:
- 14 - 14.5 GHz
- Connector Type:
- N-Type Male / N-Type Female
- Form Factor:
- Inline / In-line Coaxial
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only — no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Midwest Microwave 219-20-006 20dB RF Attenuator has been inspected and is in good condition. Stainless body is clean, N-type connectors appear undamaged, label intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Phoenix Contact USLKG 35 Ground Terminal Block 1-Pole DIN Rail Earth PE
Phoenix Contact
$10.00Was: $20.00Phoenix Contact USLKG 35 Ground Terminal Block 1-Pole DIN Rail Earth PEThe Phoenix Contact USLKG 35 is a 1-pole protective earth (PE) ground terminal block designed for DIN rail mounting. It uses a...46044- SKU:
- 46044
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Phoenix Contact
- Model:
- USLKG 35
- MPN:
- USLKG 35
- Type:
- Ground Terminal Block
- SKU:
- 46044
- Number of Poles:
- 1
- Terminal Function:
- Protective Earth (PE) / Ground
- Mounting Type:
- DIN Rail
- Color:
- Yellow / Green
- Connection Method:
- Screw Clamp
- Wire Size (Max):
- 35 mm²
- Country/Region of Manufacture:
- Germany
- Form Factor:
- DIN Rail Module
- Seller Notes:
- Terminal block only; no DIN rail included.
- Compatible With:
- Standard 35mm DIN rail installations
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Phoenix Contact USLKG 35 ground terminal block. Inspected and in good condition. Yellow/green housing shows light handling wear; no cracks or damage. Screw clamp contact intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$10.00Was: $20.00 -
Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10A
Phoenix Contact
$5.00Was: $10.00Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10ASingle-pole DIN rail-mounted terminal block with screw terminals for electrical connections in industrial control and...46043- SKU:
- 46043
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Phoenix Contact
- Model:
- BK35/E
- MPN:
- BK35/E
- Type:
- DIN Rail Terminal Block
- SKU:
- 46043
- Number of Poles:
- 1
- Voltage Rating:
- 600V
- Current Rating:
- 10A
- Mounting Type:
- DIN Rail
- Compatible With:
- K35/E, K35, UK35
- Terminal Type:
- Screw Terminal
- Color:
- Gray
- Material:
- Thermoplastic
- Certifications:
- UL, CSA, VDE
- Condition:
- Used – Inspected and Tested
- Country/Region of Manufacture:
- Germany
- Seller Notes:
- Single 1-pole terminal block; no additional accessories included.
- Condition Notes:
- Phoenix Contact BK35/E 1-Pole DIN Rail Terminal Block. Inspected and in good condition. Housing intact, screw terminals and conductor bar undamaged, light surface soiling only.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$5.00Was: $10.00 -
Spectral Dynamics SD345-3B02 Spectrascope III Narrowband Spectrum Analyzer
Spectral Dynamics
$650.00Was: $1,300.00Spectral Dynamics SD345-3B02 Spectrascope III Narrowband Spectrum AnalyzerThe Spectral Dynamics SD345-3B02 is a benchtop narrowband spectrum analyzer from Spectral Dynamics Corporation of San Diego —...46030- SKU:
- 46030
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 62.00 LBS
- Brand:
- Spectral Dynamics
- Model:
- SD345-3B02
- MPN:
- SD345-3B02
- Type:
- Narrowband Spectrum Analyzer
- SKU:
- 46030
- Series:
- Spectrascope III
- Form Factor:
- Benchtop / Portable Rack
- Display Type:
- Built-in CRT / Oscilloscope Screen
- Interface:
- IEEE-488 / GPIB (Addressable)
- Rear Connectors - Input:
- SIG IN (BNC, J1), TIME SYNC (BNC, J2)
- Rear Connectors - Plotter:
- X (J3), Y (J4), Composite Video (J5), Pen Lift (J6)
- Rear Connectors - Scope:
- Scope Y (J7), Scope X (J8)
- Rear Connectors - Trigger:
- Sweep Trig (J9), Memory Period (J10), Gated Sweep Trig / Z Axis (J11), Mem Sync (J12)
- Rear Panel - Control Buses:
- Sense & Control (J7), Auxiliary (J8) — D-sub multi-pin
- Power Fuse:
- 10A SLO
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Spectral Dynamics Corporation of San Diego, CA
- Front Panel Sections:
- X, Y, Function, Avg MI, Panel, Plotter, Remote, Spectrum, Sensitivity, Translator, Range, Level, Signal
- Condition:
- Used – Powers On
- Seller Notes:
- Powers on and display illuminates. Unable to fully test. Sold as-is for parts or use.
- Condition Notes:
- Spectral Dynamics SD345-3B02 Spectrascope III powers on and CRT display illuminates. Unable to fully test all functions. Sold as-is. Good cosmetic condition overall. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$650.00Was: $1,300.00 -
Timonta FSW 2-65-6/0.5 EMI Suppression Filter 250V 6A 50/60Hz Single Phase
Timonta
$12.00Was: $25.00Timonta FSW 2-65-6/0.5 EMI Suppression Filter 250V 6A 50/60Hz Single PhaseThe Timonta FSW 2-65-6/0.5 is a single-phase EMI/RFI suppression filter rated for 250V AC at 6 amperes, 50/60Hz. Manufactured...46021- SKU:
- 46021
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Timonta
- Model:
- FSW 2-65-6/0.5
- MPN:
- FSW 2-65-6/0.5
- Type:
- EMI/RFI Suppression Filter
- SKU:
- 46021
- Voltage Rating:
- 250V AC
- Current Rating:
- 6A
- Frequency:
- 50/60Hz
- Phase:
- Single Phase
- Temperature Rating:
- 45°C
- Inductance:
- 2 x 0.8 mH
- X Capacitance:
- 2 x 0.1 µF (X)
- Y Capacitance (line):
- 2 x 1500 pF (Y)
- Y Capacitance (neutral):
- 2 x 1000 pF (Y)
- Connection Type:
- Faston / Quick-Connect Tab Terminals
- Enclosure:
- Metal (aluminum chassis)
- Country/Region of Manufacture:
- Switzerland
- Manufacturer Location:
- Timonta AG, CH-6850 Mendrisio
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment, inspected, good condition.
- Condition Notes:
- Timonta FSW 2-65-6/0.5 EMI suppression filter. Pulled from a working environment. Inspected and in good used condition. Metal chassis shows light wear; terminals intact, label fully legible. No damage or corrosion.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00