Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Scientific Atlanta 9325 C-Band Block Converter 3.7-4.2 GHz to 950-1450 MHz
Scientific Atlanta
$35.00Was: $70.00Scientific Atlanta 9325 C-Band Block Converter 3.7-4.2 GHz to 950-1450 MHzC-band block converter that shifts satellite downlink signals from 3.7–4.2 GHz to intermediate frequency 950–1450 MHz for processing by receiver equipment. Designed for outdoor...49666- SKU:
- 49666
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Scientific Atlanta
- Model:
- 9325
- MPN:
- 9325
- Type:
- C-Band Block Converter
- SKU:
- 49666
- Input Frequency Range:
- 3.7 – 4.2 GHz
- Output Frequency Range:
- 950 – 1450 MHz
- Frequency Band:
- C-Band
- Input Connector:
- N-Type Female
- Output Connector:
- F-Type Female
- Housing / Enclosure:
- White painted aluminum, weatherproof
- Form Factor:
- Inline / Outdoor Mount
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected, appears in good condition
- Condition Notes:
- Scientific Atlanta 9325 C-Band Block Converter. Inspected and in good condition. Light paint chipping on housing corner. N-type and F-type connectors clean and intact. Label fully legible.
$35.00Was: $70.00 -
DX Antenna DSA-543 C-Band RF Down Converter 3.7-4.2GHz to 950-1450MHz Satcom
DX Antenna
$60.00Was: $125.00DX Antenna DSA-543 C-Band RF Down Converter 3.7-4.2GHz to 950-1450MHz SatcomThe DX Antenna DSA-543 is a C-Band RF down converter designed to receive signals from geostationary C-Band satellites. It accepts an input signal in the 3.7 to 4.2 GHz C-Band...49664- SKU:
- 49664
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- DX Antenna
- Model:
- DSA-543
- MPN:
- DSA-543
- Type:
- C-Band RF Down Converter
- SKU:
- 49664
- Input Frequency Range:
- 3.7 ~ 4.2 GHz
- Output Frequency Range:
- 950 ~ 1450 MHz
- Input Impedance:
- 50 Ohm
- Output Impedance:
- 75 Ohm
- DC Power Supply:
- +15 ~ +24 VDC
- Input Connector:
- N-Type Female
- Output Connector:
- F-Type or N-Type (see photos)
- Frequency Band:
- C-Band
- Form Factor:
- Outdoor Weatherproof Enclosure
- Enclosure Material:
- Die-Cast Aluminum
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working satellite installation. No cables included.
- Condition Notes:
- DX Antenna DSA-543 C-Band RF Down Converter. Inspected, in good used condition. Pulled from a working satellite installation. Enclosure shows light wear from outdoor use; connectors intact. No cables included.
$60.00Was: $125.00 -
Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz Satcom
Miteq
$1,100.00Was: $2,200.00Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz SatcomC-Band up/downconverter RF unit for satellite ground station applications. Converts between 70 MHz intermediate frequency and C-Band RF frequencies for uplink (5.845–6.425 GHz)...49656- SKU:
- 49656
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 42.00 LBS
- Brand:
- Miteq
- Model:
- U/D-9502-61289
- Secondary Model:
- U/D-9502-57687
- MPN:
- U/D-9502-61289
- SKU:
- 49656
- Type:
- C-Band Up/Downconverter RF Unit
- Condition:
- Used – Pulled from Working Environment
- Frequency Range:
- 70 MHz – 6.13 GHz
- IF Frequency:
- 70 MHz
- RF Frequency (Uplink):
- 5.845–6.425 GHz (C-Band TX)
- RF Frequency (Downlink):
- 3.625–4.2 GHz (C-Band RX)
- Enclosure Type:
- Outdoor Weatherproof Enclosure
- Form Factor:
- Outdoor Enclosure / Wall-Mount
- Dimensions:
- 19" x 17" x 6.5"
- Connector Types:
- Multi-pin circular (J1–J18), SMA/coax RF ports
- Interfaces:
- Remote Interface, Status/Redundancy Alarm, U-Link, DC Power Input
- Control Interface:
- Remote Interface (J6), U-Link (J16/J17)
- Alarm Outputs:
- Status/Redundancy Alarm; UP RF LO, DN RF LO, IF LO, SSPA, LNA, XMT MUTE
- Front Panel:
- LED display, numeric keypad, REMOTE/TRANSMIT/RECEIVE/MEMORY buttons
- Country/Region of Manufacture:
- United States
- Included: Control Board:
- Miteq M/N 117908 (Qty 1)
- Included: IF/Upconverter Module:
- Miteq M/N UDM9550-57687, 70 MHz (Qty 1)
- Included: BPF C-Band RX:
- Miteq M/N FLT-112385, 3.625–4.2 GHz (Qty 1)
- Included: BPF C-Band TX:
- Miteq M/N FLT-112387, 5.845–6.425 GHz (Qty 1)
- Included: NFS Converter Module:
- Miteq M/N NFS 4.625-5.205-100KS-57687 (Qty 2)
- Included: 1080 MHz LO Module:
- Miteq M/N 113938-1.08-57687, 1080 MHz (Qty 1)
- Included: 1150 MHz LO Module:
- Miteq M/N 117503-1150, 1150 MHz (Qty 1)
- Included: Quartz Oscillator:
- Wenzel Associates 500-02755/117321, 10 MHz (Qty 1)
- Included: RF Tray:
- Miteq M/N RF TRAY / 57687 (Qty 1)
- Application:
- Satellite Ground Station, VSAT, Teleport, C-Band SCPC/TDMA
- Seller Notes:
- Complete RF unit in outdoor enclosure with full internal module set as listed.
- Condition Notes:
- Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit pulled from a working satellite ground station environment, in use and functional. Inspected; good condition with normal field wear on enclosure exterior.
$1,100.00Was: $2,200.00 -
IF Engineering PS-24-6-2A 24VDC 2A L-Band 6-Port DC Distribution Amplifier
I.F Engineering
$150.00Was: $300.00IF Engineering PS-24-6-2A 24VDC 2A L-Band 6-Port DC Distribution AmplifierL-Band DC distribution amplifier with dual internal power supplies. Provides regulated 24VDC at 2A across six output ports for telecom and RF equipment.Specifications & What's...49653- SKU:
- 49653
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- IF Engineering
- Model:
- PS-24-6-2A
- MPN:
- PS-24-6-2A
- Secondary Model:
- CM242
- Type:
- L-Band DC Distribution Amplifier
- SKU:
- 49653
- Output Voltage:
- 24VDC
- Output Current:
- 2A
- Number of Output Ports:
- 6
- AC Input:
- AC Input via IEC connector, 4A fuse
- Internal Power Supplies:
- Dual AAK CM242 DC Power Supplies
- Frequency Band:
- L-Band
- Form Factor:
- Rackmount, 2U
- Front Panel Controls:
- Power LED, ON/OFF toggle switch per supply module
- DC Output Connectors:
- 6 x DC output jacks (rear panel)
- Condition:
- Used – Inspected
- Seller Notes:
- Includes dual internal AAK CM242 DC power supplies; 6 DC output ports
- Country/Region of Manufacture:
- United States
- Condition Notes:
- IF Engineering PS-24-6-2A L-Band 6-Port DC Distribution Amplifier. Inspected and in good used condition. Minor surface wear on chassis. Both internal AAK CM242 supplies present. All 6 DC output ports intact.
$150.00Was: $300.00 -
LNR Communications 506010000-4 C-Band Upconverter PAM-C05 602 RF Satcom 1U
LNR Communications
$1,100.00Was: $2,200.00LNR Communications 506010000-4 C-Band Upconverter PAM-C05 602 RF Satcom 1UC-Band RF upconverter module designed for satellite communication uplink applications. Converts baseband or intermediate frequency signals to C-Band RF for transmission to...49652- SKU:
- 49652
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 22.00 LBS
- Brand:
- LNR Communications
- Model:
- 506010000-4
- MPN:
- 506010000-4
- Secondary Model:
- PAM-C05 602
- Type:
- C-Band RF Upconverter
- SKU:
- 49652
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes AC power cord. Pulled from working INTELSAT environment.
- Country/Region of Manufacture:
- United States
- Form Factor:
- 1U Rackmount
- Polarization:
- Circular
- Frequency Band:
- C-Band
- Signal Type:
- RF / Satellite
- Application:
- Satellite Communications (Satcom) Uplink
- Front Panel Controls:
- XTAL ADJ, PLO ADJ, FREQ MON, XTAL ADJ1, XTAL ADJ2
- Hardware Revision:
- Rev. M
- Compatible With:
- INTELSAT satellite uplink systems
- Rear Connectors:
- BNC, DB-25 parallel connector, AC inlet
- Condition Notes:
- LNR Communications 506010000-4 C-Band Upconverter. Inspected and in good condition; pulled from a working INTELSAT satcom environment. Light rack-service wear. AC power cord included.
$1,100.00Was: $2,200.00 -
Varian VJW2740-10-1 Computer Interface Module 01006797-10 Rackmount 120VAC
Varian
$125.00Was: $250.00Varian VJW2740-10-1 Computer Interface Module 01006797-10 Rackmount 120VACThis is a 2U rackmount computer interface module designed to connect host computers to Varian microwave equipment systems. It provides parallel digital communication via multiple...49647- SKU:
- 49647
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW2740-10-1
- MPN:
- 01006797-10
- Type:
- Computer Interface Module
- SKU:
- 49647
- Seller Notes:
- Unit only; no cables included. Rack ears attached.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount, 2U
- Power Requirements:
- 120 VAC
- Connector Types:
- Multiple parallel D-sub (36-pin & 15-pin); circular mil-spec (J10)
- Number of I/O Ports:
- 6 (J1–J6 rear panel) + J10 power/signal connector
- Interface Type:
- Parallel D-sub (IEEE-488 / GPIB compatible style)
- Manufacturer Division:
- Varian Microwave Equipment Products
- Compatible With:
- Varian microwave equipment systems
- Condition:
- Used – Inspected, appears in good condition
- Condition Notes:
- Varian VJW2740-10-1 Computer Interface Module inspected and in good condition. Front panel clean, rear D-sub and J10 connectors appear intact. Light surface wear on chassis. Not powered or tested at our facility. Sold as-inspected.
$125.00Was: $250.00 -
Varian VJW6703AR00 TWTA HPA Remote Control Unit Satcom Directional Switch
Varian
$275.00Was: $550.00Varian VJW6703AR00 TWTA HPA Remote Control Unit Satcom Directional Switch 01007246Remote control unit for TWTA (Traveling Wave Tube Amplifier) and HPA (High Power Amplifier) systems in satellite communications. Manages amplifier operation across manual,...49646- SKU:
- 49646
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Varian
- Model:
- VJW6703AR00
- MPN:
- 01007246-00
- Secondary Model:
- 01007250
- SKU:
- 49646
- Type:
- TWTA HPA Remote Control Unit / Directional Switch
- Condition:
- Used – Pulled from Working Environment
- Form Factor:
- Rackmount
- Connector Type:
- D-Sub 25-pin (J1, J3)
- Application:
- Satellite Communications (Satcom) TWTA/HPA Control
- Control Modes:
- Manual, Auto, Local, Remote
- Status Indicators:
- EXT Alarm, HPA 1 Fault, HPA 2 Fault, Power, Lamp Test
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes rackmount chassis with PCB assembly 01007250; no cables included.
- Condition Notes:
- This Varian VJW6703AR00 TWTA HPA Remote Control Unit has been inspected and is in good used condition. Pulled from a working satcom environment where it was in active use and functional.
$275.00Was: $550.00 -
HP 8620C Sweep Oscillator 86240C RF Plug-In 3.6-8.6GHz Rackmount Hewlett-Packard
HP
$250.00Was: $500.00HP 8620C Sweep Oscillator 86240C RF Plug-In 3.6-8.6GHz Rackmount Hewlett-Packard The HP 8620C is a solid-state multiband sweep oscillator mainframe designed to accept interchangeable RF plug-ins for flexible microwave frequency coverage. This unit is...49643- SKU:
- 49643
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Hewlett-Packard
- Model:
- 8620C
- MPN:
- 8620C
- Secondary Model:
- 86240C
- Type:
- Sweep Oscillator
- SKU:
- 49643
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes 86240C RF plug-in installed in 19" rackmount chassis. Powers on; untested for full functionality.
- Country/Region of Manufacture:
- United States
- Form Factor:
- 19" Rack Mount
- Frequency Range:
- 3.6 to 8.6 GHz
- RF Plug-In Model:
- 86240C
- Sweep Type:
- Continuous / Stepped RF Sweep
- Power Requirements:
- 100-120V / 220-240V, 48-440Hz, 250VA Max
- Connector Type:
- BNC, SMA / Type-N RF Output
- Interface:
- Rear panel: GPIB (IEEE-488), BNC sync/trigger
- Application:
- Microwave network analyzer, scalar/vector measurements
- Compatible With:
- HP 8410 Network Analyzer, HP 8757 Scalar Network Analyzer
- Compatible With 2:
- HP 8620 Series sweep oscillator plug-ins
- Condition Notes:
- This HP 8620C Sweep Oscillator with 86240C RF plug-in is being sold as-is for parts or repair. The unit does power on; however, it has not been tested for full RF functionality at our facility, and we cannot confirm whether all functions operate as
$250.00Was: $500.00