Servers

Servers

  • Kaleidescape KServer-5000 — rear chassis label showing model KSERVER-5000 and serial number Kaleidescape KServer-5000 — Seagate Constellation ES hard drive removed from caddy, shown beside open chassis bay

    Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID

    Kaleidescape

    $792.00
    Was: $7,000.00
    Kaleidescape KServer-5000 3U Rackmount Movie Music Server Up to 24TB RAID The Kaleidescape KServer-5000 is a 3U rackmount media storage server designed for dedicated home theater and commercial AV installations. It houses a multi-drive SATA bay array...
    53241
    SKU:
    53241
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    62.00 LBS
    Brand:
    Kaleidescape
    Model:
    KServer-5000
    MPN:
    KSERVER-5000
    SKU:
    53241
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Unit does not power on. Sold as-is with 9 HDDs (Seagate Constellation ES) seated in chassis.
    Form Factor:
    3U Rackmount
    Storage Capacity:
    Up to 24TB (configurable 8TB–24TB)
    Drive Bays:
    14 drive bays visible; 9 HDDs present
    HDD Model Included:
    Seagate Constellation ES (ST1000NM0011)
    RAID Support:
    Yes — RAID protected storage
    Connectivity:
    Gigabit Ethernet, USB, RS-232 Control port
    Rear Ports:
    AC-IN (IEC), RS-232 Control, RJ-45 Ethernet, USB x2
    Power Requirements:
    AC-IN; 100-240V AC (IEC C14 inlet, Rev A PSU)
    Compatible With:
    Kaleidescape players, Kaleidescape M-Class, Cinema One
    Application:
    Home theater media storage, movie and music library
    Country of Manufacture:
    USA
    Condition Notes:
    This Kaleidescape KServer-5000 3U Rackmount Media Server is being sold as-is for parts or repair and does not power on. When plugged in, the unit emitted a pop sound and subsequently failed to power on — it has not functioned since.
    $792.00
    Was: $7,000.00
  • HP 9000 E35 server in HP C2785A rack enclosure — three-quarter front view showing upper HP Systems bezel and lower server bay with open card cage area HP C2785A rack enclosure — right side view showing louvered ventilation panels and caster base

    HP 9000 E35 A2530A Server in HP C2785A Rack Enclosure 120VAC For Parts

    HP

    $1,100.00
    Was: $8,300.00
    HP 9000 E35 A2530A Server in HP C2785A Rack Enclosure 120VAC For Parts HP 9000 E-Class Unix workstation server housed in an HP C2785A rack enclosure. This system runs HP-UX operating system and requires 120VAC, 50/60Hz power at 18A maximum...
    52241
    SKU:
    52241
    Availability:
    Local pickup available; please contact us for a shipping quote before ordering.
    Weight:
    320.00 LBS
    Brand:
    HP (Hewlett-Packard)
    Model:
    E35
    Secondary Model:
    C2785A
    MPN:
    A2530A
    SKU:
    52241
    Type:
    Unix Workstation Server in Rack Enclosure
    Condition:
    As-Is / For Parts or Not Working
    Series:
    HP 9000 E-Class
    Operating System:
    HP-UX (Unix)
    Form Factor:
    Tower Rack Enclosure
    Power Requirements:
    120VAC, 50/60Hz, 18A Max
    Enclosure Model:
    HP C2785A
    Enclosure Options:
    AW3
    Certifications:
    UL, CSA, ETL Listed
    Country/Region of Manufacture:
    USA
    Seller Notes:
    Sold as-is for parts or repair; local pickup or freight only
    Compatible With:
    HP 9000 E-Class servers
    Interface Type:
    SCSI (internal), Ethernet (RJ-45 visible on rear)
    Drives/Bays:
    Optical drive and tape/floppy drive visible in front bay
    Approximate Dimensions:
    36" W x 24" D x 44" H (approx.)
    Condition Notes:
    HP 9000 E35 A2530A server in C2785A rack sold as-is for parts or repair. Pulled from a credit union museum display. Functionality not verified; no working guarantee. Local pickup preferred; contact us for freight quote.
    $1,100.00
    Was: $8,300.00
  • HP D6486N Workstation Server Tower Pentium II 400MHz for Parts

    HP D6486N Workstation Server Tower Pentium II 400MHz for Parts

    HP

    $300.00
    Was: $600.00
    HP D6486N Workstation Server Tower Pentium II 400MHz for PartsThe HP D6486N is a desktop workstation/server tower from the late 1990s, built around the Intel Pentium II 400MHz processor. This unit does not power on and is being sold AS-IS for parts or...
    27865
    SKU:
    27865
    Availability:
    This item is in stock and ready to ship.
    Weight:
    0.00 LBS
    Brand:
    Hewlett-Packard
    Model:
    D6486N
    MPN:
    0950-2772
    Type:
    Desktop Workstation/Server Tower
    SKU:
    27865
    Processor:
    Pentium II 400MHz
    Form Factor:
    Tower
    Era:
    Late 1990s
    Condition Notes:
    For parts or repair — does not power on; power supply needed
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Sold as-is for parts or repair. Power supply HP p/n 0950-2772 required.
    Condition Notes:
    HP D6486N tower workstation sold as-is for parts/repair. Does not power on; requires HP p/n 0950-2772 power supply. Not tested, not guaranteed functional.
    $300.00
    Was: $600.00
  • Sun Enterprise 3500 AMG 4-25-5 9 Server System

    Sun Enterprise 3500 AMG 4-25-5 9 Server System

    Sun

    $0.00
    Sun Enterprise 3500 AMG 4-25-5 9 Server SystemThe Sun Enterprise 3500 is a high-performance enterprise-class server designed for mission-critical computing environments. This SPARC-based rackmount system was built to deliver reliable performance in data...
    17812
    SKU:
    17812
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.00 LBS
    Brand:
    Sun Microsystems
    Model:
    Enterprise 3500
    MPN:
    AMG 4-25-5
    Type:
    Rackmount Server System
    SKU:
    17812
    Condition:
    Used
    Form Factor:
    Rackmount
    Processor Architecture:
    SPARC
    Server Type:
    Enterprise-Class Server
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Sun Enterprise 3500 AMG used server system, pulled from working environment, inspected and ready. Contact for photos and details.
    $0.00
  • Zycad XP-140 Hardware Simulation Accelerator front-left view showing carry handle, front panel controls, and Zycad logo badge on lower right Zycad XP-140 rear panel view showing IEC power inlet, power switch, ventilation slots, and Zycad specification label

    Zycad XP-140 Hardware Simulation Accelerator P/N 101291 Rev A 3-Board 100-240V

    Zycad

    $575.00
    Was: $1,200.00
    Zycad XP-140 Hardware Simulation Accelerator P/N 101291 Rev A 3-Board 100-240V Hardware logic simulation accelerator manufactured by Zycad for EDA (Electronic Design Automation) workstations. This unit provides dedicated simulation acceleration for...
    48541
    SKU:
    48541
    Availability:
    Usually ships within 3-5 business days due to size and packaging requirements.
    Weight:
    49.00 LBS
    Brand:
    Zycad
    Model:
    XP-140
    MPN:
    101291
    SKU:
    48541
    Revision:
    Rev A
    Condition:
    Used – Inspected
    Seller Notes:
    Includes 3 boards: CBUSIB (FAB 101149-B, ASSY 101150-A) and 2x SM (FAB 101145-B, ASSY 101146-B)
    Form Factor:
    Tower / Portable Chassis with Carry Handle
    Power Requirements:
    100-240V AC, 6A, 50-60Hz
    Country of Manufacture:
    USA
    Board 1:
    Zycad CBUSIB Board – FAB 101149-B, ASSY 101150-A
    Board 2:
    Zycad SM Board – FAB 101145-B, ASSY 101146-B
    Board 3:
    Zycad SM Board – FAB 101145-B, ASSY 101146-B
    Number of Boards:
    3
    Application:
    Hardware Logic Simulation / EDA Acceleration
    Original List Price (1990):
    $47,500
    FCC Class:
    Class A Computing Device
    Status Indicators:
    POWER, RUN, SIMULATE, BEHAVIOR, SPEED, BUSY, XMIT, RECV, IBUS SEL, LOAD, DUMP, IREC, DMCD, TA, EVAL, CONV
    Host Interface:
    Ribbon cable / display header (J1 RESET, J3 READY/ERROR)
    Type:
    Hardware Simulation Accelerator
    Condition Notes:
    Zycad XP-140 Simulation Accelerator P/N 101291 Rev A inspected, in good used condition. All 3 boards present (CBUSIB + 2x SM). Chassis shows light age wear. Not bench-tested. Please contact us with questions.
    $575.00
    Was: $1,200.00
  • Compaq ProLiant DL320 1U rackmount server front view showing faceplate, Compaq logo, and floppy drive bay Compaq ProLiant DL320 label close-up showing part number R0011000256 and serial barcode 6J18JMM2G009

    Compaq ProLiant DL320 R0011000256 1U Rackmount Server Intel PIII 1GHz 40GB 256MB

    Compaq

    $150.00
    Was: $425.00
    Compaq ProLiant DL320 R0011000256 1U Rackmount Server Intel PIII 1GHz 40GB 256MB1U rackmount server from the early 2000s era. Designed for small-to-medium business deployments and remote office applications.Specifications & What's IncludedProcessor:...
    48982
    SKU:
    48982
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    29.00 LBS
    Brand:
    Compaq
    Model:
    ProLiant DL320
    MPN:
    R0011000256
    Secondary Model:
    6J18JMM2G009
    SKU:
    48982
    Type:
    1U Rackmount Server
    Condition:
    As-Is / For Parts or Not Working
    Processor:
    Intel Pentium III (PIII) 1.0 GHz
    Processor Socket:
    Socket 370
    RAM:
    256 MB
    Storage:
    40 GB HDD (Seagate Barracuda 7200.7)
    Optical / Floppy Drive:
    1.44 MB Floppy Disk Drive
    Form Factor:
    1U Rackmount
    Number of Bays:
    1x 3.5" HDD Bay
    NIC / Network Ports:
    Dual NIC (NIC 1, NIC 2) — RJ-45
    USB Ports:
    2x USB (rear)
    Serial Port:
    1x DB-9 Serial (rear)
    VGA Port:
    1x VGA (rear)
    PS/2 Ports:
    2x PS/2 (rear, keyboard + mouse)
    Power Supply:
    Lite-On PS-5141-9 (Compaq 207738-001)
    Power Requirements:
    100-120V / 200-240V AC, 50/60Hz
    Series:
    ES1018
    Seller Notes:
    Sold as-is for parts or repair. Does not power on.
    Country/Region of Manufacture:
    China
    Condition Notes:
    Compaq ProLiant DL320 1U server does not power on — tested, confirmed no-POST. Sold as-is for parts or repair only. No functionality guarantee. Interior components present. Please view photos and contact us with questions.
    $150.00
    Was: $425.00
  • Dell PowerEdge 2550 2U rackmount server — front panel view showing Dell logo badge and drive bays Dell PowerEdge 2550 2U server — rear panel view showing I/O ports, power supply, and expansion slots

    Dell PowerEdge 2550 2U Rackmount Server Pentium III 1.13GHz 256MB ECC CD-ROM

    Dell

    $225.00
    Was: $400.00
    Dell PowerEdge 2550 2U Rackmount Server Pentium III 1.13GHz 256MB ECC CD-ROMA 2U rackmount server from Dell's PowerEdge line, designed for small to mid-size business environments. This unit features dual-processor support capability and was built for...
    28031
    SKU:
    28031
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    55.00 LBS
    Brand:
    Dell
    Model:
    PowerEdge 2550
    MPN:
    CPSBN2
    Secondary Model:
    SMP
    Type:
    2U Rackmount Server
    SKU:
    28031
    Processor:
    Intel Pentium III 1.13GHz
    Memory:
    256MB ECC
    Memory Type:
    ECC
    Storage:
    No Hard Drive installed
    Optical Drive:
    CD-ROM
    Power Supply:
    Dell NPS-330BB A Rev 02, 330W
    Power Requirements:
    100-240V AC, 7.5A, 50-60Hz
    Form Factor:
    2U Rack Mount
    Expansion Card:
    Performance Technologies PT-PCI344-PQ PCI card
    Onboard I/O:
    2x USB, 2x Ethernet, PS/2 KB & Mouse, VGA
    Serial Ports:
    2 x 9-Pin Serial (DB-9)
    Parallel Port:
    25-Pin Parallel
    Video Output:
    15-Pin VGA
    Network Ports:
    2 x Ethernet (onboard)
    Condition:
    Used – Inspected and Tested
    Country/Region of Manufacture:
    Thailand
    Seller Notes:
    Includes PT-PCI344-PQ card. No hard drive or OS installed.
    FCC Class:
    B
    Certifications:
    UL, CE, FCC Class B, IC Class B ICES-003, TUV
    Condition Notes:
    Dell PowerEdge 2550 2U server has been powered and tested — boots to BIOS, tech confirmed system specs. Good working order. No hard drive or OS installed. Normal cosmetic wear. PT-PCI344-PQ card included.
    $225.00
    Was: $400.00
  • IBM 7026-H80 RS/6000 Enterprise Server front panel view showing DVD-RW drive, DDS3 tape drive, operator panel, and dual cooling fans IBM 7026-H80 RS/6000 server rear I/O panel showing multiple populated PCI expansion slots and riser assembly with power cable attached

    IBM 7026-H80 RS/6000 Enterprise Server For Parts SCSI LVD GigE Boards

    IBM

    $500.00
    Was: $1,000.00
    IBM 7026-H80 RS/6000 Enterprise Server For Parts SCSI LVD GigE Boards IBM POWER3-based rack-mount enterprise server in 4U form factor. Shipped with multiple I/O adapters, storage controllers, and peripherals as listed below. Specifications & What's...
    33672
    SKU:
    33672
    Availability:
    This item requires palletized freight shipping. Please contact us for a freight quote before purchasing.
    Weight:
    155.00 LBS
    Brand:
    IBM
    Model:
    7026-H80
    MPN:
    7026-H80
    SKU:
    33672
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes SCSI, GigE, SSA boards, DVD-RW, DDS3 tape drive. Sold as-is.
    Form Factor:
    Rack Mount (4U Tower/Rack)
    Product Line:
    IBM RS/6000 / eServer pSeries
    Power Requirements:
    200-240V, 3.0 kVA, 50/60Hz
    Country of Manufacture:
    Italy (power supply); system assembled USA
    Compatible With:
    IBM RS/6000, eServer pSeries applications
    Processor Architecture:
    IBM POWER3
    Included Card 1:
    IBM GXT120P Graphics Adapter, FRU 08L0895
    Included Card 2:
    IBM SSA 4-Port Adapter (x2), FRU 18P0399
    Included Card 3:
    LSI Logic Symbios SYM22910 Dual SCSI LVD/SE (x2)
    Included Card 4:
    10/100/1000 Base-T NIC, FRU 00P1690, ASSY 200027C
    Hard Drives:
    2x IBM 36.4GB 10000RPM Ultra3 SCSI, FRU 07N3173
    Optical Drive:
    DVD-RW
    Tape Drive:
    DDS3 12.0GB Digital Data Storage 4.7GB native
    SCSI Type:
    Ultra3 SCSI LVD/SE 80-Pin
    Network Interface:
    10/100/1000 Base-T Gigabit Ethernet
    Expansion Slots:
    14 PCI slots visible (slots 1–14)
    Power Supply Model:
    Bafin ROAL Model 137, P/N N11K0812, 598W
    Power Supply Input:
    100-127V / 200-240V AC, 47-63Hz
    Type Label:
    Type 7026 C1, 200-240V, 3.0kVA, 50/60Hz
    Certifications:
    UL, CE, GS, VCCI-A, FCC Part 15
    Condition Notes:
    IBM 7026-H80 RS/6000 Enterprise Server tested and failed: powers on, no video, no POST, no power to drives. Sold as-is for parts or repair only. Not guaranteed functional. Boards and drives included.
    $500.00
    Was: $1,000.00