Injection Molders
Injection molders are specialized machines used in manufacturing processes to produce plastic parts by injecting molten material into a mold. These machines play a critical role in mass production processes across industries such as automotive, medical, and consumer goods. Injection molders must be precise, durable, and efficient to meet the demands of high-volume production. They use a combination of heat and pressure to shape the plastic material into the desired form. Injection molders require skilled operators to ensure proper functioning and maintenance. Overall, Injection molders are essential equipment for cost-effective and scalable production of plastic components in various industries.
-
Meiki MDMI DVD CD Disc Injection Mold Tool Kata Systems w/ Adjusters For Parts
Meiki
$495.00Was: $1,000.00Meiki MDMI DVD CD Disc Injection Mold Tool Kata Systems w/ Adjusters For Parts Meiki MDMI injection mold tool designed for DVD and CD optical disc production. This mold assembly is used with Kata...49473- SKU:
- 49473
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 245.00 LBS
- Brand:
- Meiki
- Model:
- MDMI
- MPN:
- MDMI
- Type:
- DVD/CD Disc Injection Mold Tool
- SKU:
- 49473
- Condition:
- As-Is / For Parts or Not Working
- Compatible With:
- Kata Systems Injection Molders
- Application:
- DVD / CD Optical Disc Injection Molding
- Includes:
- Mold with adjusters, vacuum fittings, air-blow ports
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Sold AS-IS with rust buildup; includes adjusters and multiple fittings
- Condition Notes:
- This Meiki MDMI DVD/CD Disc Injection Mold Tool is being sold AS-IS for parts or repair. The mold exhibits surface rust and oxidation that is visible across multiple exterior faces, most notably on the bottom/parting-line surfaces, as seen in the
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$495.00Was: $1,000.00 -
Sumitomo SD30 Disk Injection Molding Machine 460V 3Ph Yushin DRD II-HS
Sumitomo
$4,158.00Was: $8,400.00Sumitomo SD30 Disk Injection Molding Machine 460V 3Ph Yushin DRD II-HSSumitomo Heavy Industries SD30 injection molding machine configured for CD, DVD, and Blu-Ray optical disc manufacturing. Equipped...49432- SKU:
- 49432
- Availability:
- Freight shipment required — contact us for a shipping quote before purchasing.
- Weight:
- 4,000.00 LBS
- Brand:
- Sumitomo Heavy Industries
- Model:
- SD30
- MPN:
- SD30
- Type:
- CD/DVD Disc Injection Molding Machine
- SKU:
- 49432
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes Yushin DRD II-HS robot arm and Netstal controller boards
- Country/Region of Manufacture:
- Japan
- Voltage Rating:
- 460V AC
- Current Rating:
- 35 Amps
- Phase:
- Three Phase
- Frequency:
- 60 Hz
- Motor Power:
- 15 kW
- Heater Power:
- 4.8 kW
- Wiring Diagram Number:
- M391370
- Robot Arm:
- Yushin DRD II-HS
- Controller:
- Netstal controller boards
- Hydraulic Unit:
- Sumitomo C110
- Application:
- CD / DVD / Blu-Ray optical disc manufacturing
- Form Factor:
- Floor Standing / Freestanding Industrial Machine
- Shipping Method:
- Freight required
- Licensed Under:
- Lemelson U.S. Pat. No. 4120922
- Condition Notes:
- Sumitomo SD30 disc injection molding machine sold as-is for parts or repair. Pulled from a CA disc manufacturing facility; appears mostly complete but could not be fully tested. Freight required. No functionality guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$4,158.00Was: $8,400.00 -
Netstal Sycap Graphtrack Front Panel 5297290 110.240.9366 Discjet 600/110
Netstal
$150.00Was: $300.00Netstal Sycap Graphtrack Front Panel 5297290 110.240.9366 Discjet 600/110Front panel operator interface for Netstal Sycap Discjet 600/110 injection molding machines. Provides machine control and...48752- SKU:
- 48752
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- 5297290
- MPN:
- 5297290
- Secondary Model:
- 110.240.9366
- Type:
- Injection Molder Front Panel / Operator Interface
- SKU:
- 48752
- Condition:
- Used – Pulled from Working Environment
- Compatible With:
- Netstal Sycap Discjet 600/110 Injection Molder
- Seller Notes:
- Includes trackball (Marcus RB2-811B-5087), numeric keypad, and PCB assembly
- Trackball Model:
- Marcus RB2-811B-5087
- Keyboard Part Number:
- 5297283
- System:
- Netstal Sycap Temp Controller / Discjet 600/110
- Form Factor:
- Panel Mount
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal Sycap Graphtrack Front Panel 5297290 pulled from a working Discjet 600/110 injection molder. Inspected; used condition. Membrane overlay shows grime and surface wear. PCB and trackball intact. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Netstal Sycap Graphtrack Front Panel 110.240.9366 Trackball Keyboard 989.451.001
Netstal
$150.00Was: $300.00Netstal Sycap Graphtrack Front Panel 110.240.9366 Trackball Keyboard 989.451.001This is the Graphtrack operator front panel assembly (P/N 110.240.9366) from a Netstal Sycap Discjet 600/110 injection...48753- SKU:
- 48753
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.85 LBS
- Brand:
- Netstal
- Model:
- 110.240.9366
- MPN:
- 110.240.9366
- Secondary Model:
- 989.451.001
- Type:
- Injection Molder Operator Front Panel
- SKU:
- 48753
- Compatible With:
- Netstal Sycap Discjet 600/110 Injection Molder
- Compatible With 2:
- Netstal TAS 110.240.9825
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes trackball assembly (Marcus RB2-811B-5087) and PCB keyboard assembly
- Trackball Model:
- Marcus RB2-811B-5087
- Trackball Part Number:
- 989.451.001
- Interface Type:
- Membrane Keyboard + Trackball
- Form Factor:
- Panel Mount
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal Sycap Graphtrack Front Panel 110.240.9366 pulled from a working Discjet 600/110 injection molder. Inspected and in good used condition. Includes trackball (989.451.001) and PCB keyboard board.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Netstal Sycap AMS-MBUS 7 Slot Computer Chassis WE 60440 DiskJet Injection Molder
Netstal
$125.00Was: $250.00Netstal Sycap AMS-MBUS 7 Slot Computer Chassis WE 60440 DiskJet Injection MolderThis is the AMS-MBUS 7-Slot computer chassis from a Netstal Sycap control system, part number WE 60440. The chassis...48747- SKU:
- 48747
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- AMS-MBUS 7 Slot
- MPN:
- WE 60440
- Secondary Model:
- 110.040.7315
- Type:
- Computer Backplane Chassis
- SKU:
- 48747
- Number of Slots:
- 7
- Compatible With:
- Netstal Sycap DiskJet 600/110 Injection Molder
- Slot Assignments:
- CPU 286, MEM 286, SPIO, SBX 279, SLA (Bitbus)
- Bus Type:
- AMS-MBUS (Netstal Sycap proprietary)
- Form Factor:
- Desktop / Open Frame Chassis
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Backplane PCB installed; no plug-in modules included
- Country/Region of Manufacture:
- Switzerland
- Application:
- Injection Molding Machine Control System
- Condition Notes:
- Netstal Sycap AMS-MBUS 7-Slot Chassis WE 60440 pulled from a working DiskJet 600/110 injection molder. Inspected and in good used condition. Backplane PCB installed; no plug-in modules included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Matsui MCM-151 Injection Molder Mold Temperature Controller 460V 3Ph 60Hz
Matsui
$650.00Was: $1,300.00Matsui MCM-151 Injection Molder Mold Temperature Controller 460V 3Ph 60HzMold temperature controller for plastic injection molding machines. Maintains consistent mold temperatures during production...47099- SKU:
- 47099
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 118.00 LBS
- Brand:
- Matsui
- Model:
- MCM-151
- MPN:
- MCM-151
- Type:
- Mold Temperature Controller
- SKU:
- 47099
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS for parts or repair. Untested. Speck Pumpen pump assembly included.
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Freestanding / Cart-Mounted
- Power Requirements:
- AC 460V, 3-Phase, 60Hz
- Voltage Rating:
- 460V AC
- Phase:
- Three Phase
- Frequency:
- 60Hz
- Motor Power:
- 0.5kW (1.4A)
- Heater Power:
- 2.0kW (2.5A)
- Pump Model:
- Speck Pumpen NPY-2251-0034/VA
- Application:
- Plastic Injection Molding
- Compatible With:
- Plastic injection molding machines requiring mold temp control
- Condition Notes:
- Matsui MCM-151 Mold Temperature Controller sold AS-IS for parts or repair. Pulled from a larger system; untested, no functionality guaranteed. Heavy rust and paint loss on exterior and interior. Speck Pumpen pump assembly present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$650.00Was: $1,300.00 -
Netstal KOL 110.240.9539 Control Panel CAN 110.240.9335 Komplett Injection Mold
Netstal
$275.00Was: $550.00Netstal KOL 110.240.9539 Control Panel CAN 110.240.9335 Komplett Injection MoldControl panel assembly for Netstal injection molding machines. Combines the KOL operator interface panel with a CAN...46353- SKU:
- 46353
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Netstal
- Model:
- KOL 110.240.9539
- MPN:
- 110.240.9539
- Secondary Model:
- CAN 110.240.9335
- Type:
- Injection Molding Machine Control Panel with CAN Interface
- SKU:
- 46353
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes KOL operator panel (110.240.9539) and CAN Komplett interface board (110.240.9335)
- Compatible With:
- Netstal Injection Molding Machines
- Interface Type:
- CAN Bus
- Panel Part Number:
- 110.240.9593
- Board Label:
- NETSTAL CAN 110.240.9335 komplett
- Included Components:
- Operator control panel; CAN Komplett interface PCB
- Form Factor:
- Flat Panel Overlay + PCB Module
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal KOL 110.240.9539 control panel and CAN 110.240.9335 Komplett interface board, pulled from a working injection molding system. Inspected; both components in good used condition. Panel shows normal wear; PCB clean with intact connectors.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Netstal MSY3 110.240.9409d Komplett System Board Diskjet Injection Molding PCB
Netstal
$110.00Was: $225.00Netstal MSY3 110.240.9409d Komplett System Board Diskjet Injection Molding PCBSystem control board for Netstal Diskjet injection molding machines. This PCB card manages operational functions within...46345- SKU:
- 46345
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- MSY3
- MPN:
- 110.240.9409d
- Secondary Model:
- 110.240.9409d Komplett
- Type:
- System Board / PCB Card
- SKU:
- 46345
- Compatible With:
- Netstal Diskjet Injection Molding System
- Form Factor:
- Card / PCB Board
- Application:
- Injection Molding System Control
- Connector Types:
- Multi-pin DIN edge connectors, multi-pin headers
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; removed from Netstal Diskjet injection molding system
- Condition Notes:
- Netstal MSY3 110.240.9409d Komplett PCB removed from a working Diskjet injection molding system. Board appears intact with no visible damage. Normal industrial wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$110.00Was: $225.00 -
Netstal SIK 110.240.9650.a Relay Control Board Injection Molding Machine PCB
Netstal
$150.00Was: $300.00Netstal SIK 110.240.9650.a Relay Control Board Injection Molding Machine PCBRelay control board PCB for Netstal injection molding machines. This card module manages electrical switching and control...46344- SKU:
- 46344
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- SIK 110.240.9650.a
- MPN:
- 110.240.9650.a
- Type:
- Relay Control Board / PCB
- SKU:
- 46344
- Condition:
- Used – Inspected
- Compatible With:
- Netstal Injection Molding Machines
- Form Factor:
- Card / Module (PCB)
- Relay Brand:
- NAIS
- Number of Relays:
- 8
- Connector Type:
- Multi-pin White Header Connectors
- Application:
- Injection Molding Machine Control System
- Country/Region of Manufacture:
- Switzerland
- Seller Notes:
- Board only. Inspected and in good condition.
- Condition Notes:
- Netstal SIK 110.240.9650.a relay control PCB. Inspected and in good condition. PCB clean, all 8 NAIS relays present, connectors intact. Light handling wear from prior use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Netstal 110.240.9696 Komplett I/O Backplane System Board Injection Molder
Netstal
$150.00Was: $300.00Netstal 110.240.9696 Komplett I/O Backplane System Board Injection MolderI/O backplane system board for Netstal injection molding machines. This multi-slot edge connector backplane serves as the...46329- SKU:
- 46329
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Netstal
- Model:
- 110.240.9696
- MPN:
- PAN 110.240.9696 komplett
- Type:
- I/O Backplane System Board
- SKU:
- 46329
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from working Netstal injection molding machine.
- Country/Region of Manufacture:
- Switzerland
- Form Factor:
- Card / PCB Module
- Compatible With:
- Netstal injection molding machines
- Application:
- Injection Molding Machine Control System
- Interface Type:
- Multi-slot edge connector backplane
- Number of Slots:
- Multiple — high-density card slots visible on both faces
- Condition Notes:
- Netstal 110.240.9696 Komplett I/O backplane pulled from a working injection molder where it was in use and functional. Inspected and in good used condition. Normal industrial wear; PCB and connectors appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Croyden 960-2 Rinse Controller Module Netstal Discjet Injection Molder Panel
Croyden
$85.00Was: $175.00Croyden 960-2 Rinse Controller Module Netstal Discjet Injection Molder PanelThe Croyden Series 960-2 is a dedicated rinse cycle controller module designed for the Netstal Discjet injection molding...46142- SKU:
- 46142
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Croyden
- Model:
- 960-2
- MPN:
- 960-2
- Type:
- Rinse Controller Module Panel
- SKU:
- 46142
- Series:
- Series 960-2
- Compatible With:
- Netstal Discjet Injection Molder
- Application:
- Injection Molder Rinse Cycle Control
- Internal Components:
- Humphrey Mini-Mizer 3E1 Solenoid Valves, 12VDC
- Valve Voltage:
- 12VDC
- Valve Rating:
- 0-100 PSIG, 0.5 Watts (Humphrey Mini-Mizer)
- Capacitor:
- 2200uF 35V electrolytic capacitor (visible internally)
- Front Panel Controls:
- Cycles display, Status LEDs (Run/Halt/Lock/Setup), Input/Open/Setup/Start/Stop Reset buttons
- Terminal Strip:
- Labeled terminals: LL, RES, IT1, IT2, DPN, C, 24C, H
- Form Factor:
- Panel-Mount Module with External Wiring Harness
- Includes:
- Controller module with attached multi-conductor wiring harness
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Croyden 960-2 Rinse Controller panel inspected and in good condition. Pulled from a working environment where it was actively in use. Front panel shows light wear; enclosure intact. Wiring harness included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Netstal PIA 110.240.6181a System Interface Board Injection Molder I/O Card
Netstal
$150.00Was: $300.00Netstal PIA 110.240.6181a System Interface Board Injection Molder I/O CardSystem interface and I/O control board for Netstal injection molding machines. Routes parallel input/output signals between...46063- SKU:
- 46063
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Netstal
- Model:
- PIA 110.240.6181a
- MPN:
- 110.240.6181a
- Secondary Model:
- PIA 110.240.6182a
- Type:
- System Interface / I/O Board
- SKU:
- 46063
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a Netstal injection molding machine
- Country/Region of Manufacture:
- Switzerland
- Form Factor:
- Card / Module / PCB
- Compatible With:
- Netstal Injection Molding Machines
- Application:
- Injection Molding Machine Control / I/O Interface
- Connector Type:
- DIN 41612 / Multi-pin edge connector
- Number of I/O Pins:
- 40 (numbered 1–40 visible on PCB)
- Interface:
- Parallel I/O pin header array
- Condition Notes:
- Netstal PIA 110.240.6181a system interface board. Inspected, good used condition. Pulled from a working Netstal injection molding machine. PCB and connectors appear intact with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Netstal RVN 110.240.7129c Control Board 110.068.9199 Diskjet Injection Molding
Netstal
$150.00Was: $300.00Netstal RVN 110.240.7129c Control Board 110.068.9199 Diskjet Injection MoldingControl board for Netstal Diskjet injection molding systems. This card-based system module manages machine operations and...46027- SKU:
- 46027
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- RVN 110.240.7129c
- MPN:
- 110.240.7129c
- Secondary Model:
- 110.068.9199
- SKU:
- 46027
- Type:
- Injection Molding Control Board / System Card
- Compatible With:
- Netstal Diskjet Injection Molding Machine
- Compatible With 2:
- Steag Firstlight Diskjet CD/DVD Molding System
- Form Factor:
- Card / Module (PCB)
- Application:
- Injection Molding Machine Control System
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; removed from a working Diskjet injection molding system.
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal RVN 110.240.7129c control board (P/N 110.068.9199) pulled from a working Diskjet injection molding system. Good used condition; PCB, ICs, terminal blocks, and card-edge connector all intact. No visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Netstal DSC 110.240.6591 Komplett System Card Injection Molding Control Board
Netstal
$120.00Was: $250.00Netstal DSC 110.240.6591 Komplett System Card Injection Molding Control BoardSystem control PCB module for Netstal injection molding equipment. This card manages operational functions within Diskjet...46019- SKU:
- 46019
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- DSC 110.240.6591
- MPN:
- 110.240.6591
- Secondary Model:
- 110.240.6591i
- Type:
- System Control Card / PCB Module
- SKU:
- 46019
- Compatible With:
- Netstal Diskjet Injection Molding System
- Compatible With 2:
- Steag Firstlight Injection Molding System
- Form Factor:
- Card / Module (PCB)
- Application:
- Injection Molding Machine Control
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; removed from a working Diskjet injection molding system
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal DSC 110.240.6591 system card pulled from a working Diskjet injection molding system. Board is in good used condition — no visible damage or missing components. Part number label intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$120.00Was: $250.00 -
Netstal RNX 110.240.9199 Komplett System Card Board Injection Molding Machine
Netstal
$130.00Was: $250.00Netstal RNX 110.240.9199 Komplett System Card Board Injection Molding MachineSystem control PCB for Netstal RNN and RNX series injection molding machines. This card manages machine operations and...45997- SKU:
- 45997
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Netstal
- Model:
- RNX
- MPN:
- 110.240.9199
- Secondary Model:
- RNN
- SKU:
- 45997
- Type:
- System Control Card / PCB
- Compatible With:
- Netstal RNN / RNX Injection Molding Machines
- Form Factor:
- Card / Module
- Connector Type:
- Multi-pin Edge Connector
- ICs / Chipset:
- LM2907N, LM308AN (National Semiconductor)
- Country/Region of Manufacture:
- Switzerland
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Board only; no enclosure or additional accessories included.
- Condition Notes:
- Netstal RNX 110.240.9199 Komplett System Card. Inspected and in good used condition. Board is clean with no visible damage. Multi-pin edge connector shows light oxidation from storage. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$130.00Was: $250.00 -
Netstal RFD 110.240.9936 Komplett Control Board Diskjet Injection Molding System
Netstal
$125.00Was: $250.00Netstal RFD 110.240.9936 Komplett Control Board Diskjet Injection Molding SystemThe Netstal RFD 110.240.9936 Komplett is a PCB control board designed for use in the Netstal Diskjet injection molding...45996- SKU:
- 45996
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- RFD 110.240.9936
- MPN:
- 110.240.9936
- Type:
- System Control Board / PCB Module
- SKU:
- 45996
- Condition:
- Used – Pulled from Working Environment
- Compatible With:
- Netstal Diskjet Injection Molding System
- Compatible With 2:
- Steag Firstlight Diskjet System
- Form Factor:
- Card / Module (PCB)
- Seller Notes:
- Board only; pulled from a working Netstal Diskjet injection molding system.
- Country/Region of Manufacture:
- Switzerland
- Application:
- Optical Disc / CD/DVD Injection Molding Control
- Connector Type:
- Multi-pin edge connector (parallel bus)
- Condition Notes:
- Netstal RFD 110.240.9936 Komplett control board pulled from a working Diskjet injection molding system. Good used condition; PCB clean, components intact, edge connector shows normal wear. Red pull tab present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
Netstal HVC 110.240.5174a System Control Card Diskjet Injection Molding PCB
Netstal
$55.00Was: $100.00Netstal HVC 110.240.5174a System Control Card Diskjet Injection Molding PCB BoardThis is a Netstal HVC 110.240.5174a system control card (PCB board) pulled from a Diskjet injection molding system...45995- SKU:
- 45995
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- HVC 110.240.5174a
- MPN:
- 110.240.5174a
- Type:
- System Control Card / PCB Board
- SKU:
- 45995
- Seller Notes:
- Pulled from a working Diskjet injection molding system
- Compatible With:
- Netstal Diskjet Injection Molding System
- Form Factor:
- Card/Module
- Application:
- Injection Molding Machine Control
- Main ICs / Chipset:
- LM339N comparator, LM3084N (National Semiconductor / ST)
- Relay:
- PCB-mount relay (blue, visible on top side)
- Edge Connector:
- Multi-pin DIN/card-edge connector
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- Malaysia (IC date codes visible)
- Condition Notes:
- Netstal HVC 110.240.5174a system control card removed from a working Diskjet injection molding system. Board is in good used condition — PCB, ICs, relay, and edge connector all appear intact. No visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Netstal RPC 110.240.5328 Komplett System Control Card Diskjet Injection Molding
Netstal
$175.00Was: $350.00Netstal RPC 110.240.5328 Komplett System Control Card Diskjet Injection MoldingThis is a Netstal RPC 110.240.5328 Komplett system control card pulled from a Diskjet injection molding machine produced...45994- SKU:
- 45994
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- RPC 110.240.5328
- MPN:
- 110.240.5328
- Type:
- System Control Card / PCB Module
- SKU:
- 45994
- Compatible With:
- Diskjet Injection Molding Machine, Steag Firstlight
- Form Factor:
- Card/Module
- Application:
- Injection Molding Machine Control
- Seller Notes:
- Card only, as removed from machine. No accessories included.
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Netstal RPC 110.240.5328 Komplett system card pulled from a working injection molding machine. Good used condition; components appear intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
Netstal CUC 110.240.9468 Komplett System Control Board Injection Molder PCB
Netstal
$275.00Was: $550.00Netstal CUC 110.240.9468 Komplett System Control Board Injection Molder PCBThis is a Netstal CUC 110.240.9468 Komplett system control board, a printed circuit board (PCB) designed for use in Netstal...45985- SKU:
- 45985
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- CUC 110.240.9468
- MPN:
- 110.240.9468a
- Type:
- Komplett System Control Board / PCB
- SKU:
- 45985
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a working Netstal injection molder
- Compatible With:
- Netstal injection molding machines (CUC series)
- Form Factor:
- Card / Module (PCB)
- Application:
- Injection Molder Machine Control
- Connector Types:
- DB9 serial ports (x2), edge connectors, ribbon cable headers
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal CUC 110.240.9468 Komplett system board. Inspected and in good condition; pulled from a working injection molder where it was in active use and functional. Board is clean with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Sailor OE-2413 Robot Arm Injection Molder Sprue Picker 3PH 480V 5A 1999
Sailor
$550.00Was: $1,100.00Sailor OE-2413 Robot Arm Injection Molder Sprue Picker 3PH 480V 5A 1999Pneumatic robot arm designed for automated sprue and runner removal from injection molds. Built by Sailor (The Sailor Pen Co.,...45584- SKU:
- 45584
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 130.00 LBS
- Brand:
- Sailor
- Model:
- OE-2413
- MPN:
- OE-2413
- Type:
- Injection Molder Robot Arm / Sprue Picker
- SKU:
- 45584
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- Japan
- Manufacturer:
- The Sailor Pen Co., Ltd., Tokyo, Japan
- Year of Manufacture:
- 1999
- Power Requirements:
- 3PH 480V 5A
- Phase:
- Three Phase
- Voltage Rating:
- 480V
- Current Rating:
- 5A
- Compatible With:
- Meike Plastic Injection Molder
- Application:
- Sprue / runner removal from injection mold
- Gripper Type:
- Pneumatic sprue gripper
- Pressure Gauge:
- SMC 0–1 MPa analog pressure gauge (Sprue Grip)
- Vacuum/Pressure Controller:
- SMC DP2-20 digital pressure switch
- Included Cables:
- Multi-conductor wiring harness with SWING and HORIZ connectors
- Connector Types:
- SWING connector, HORIZ connector (labeled on cable ends)
- Seller Notes:
- Includes wiring harness with SWING and HORIZ connectors
- Condition Notes:
- Sailor OE-2413 injection molder robot arm pulled from a working plastic injection molder. Appears in good used condition with light surface wear. Includes wiring harness with SWING and HORIZ connectors. 3PH 480V 5A.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$550.00Was: $1,100.00