Injection Molders
Injection molders are specialized machines used in manufacturing processes to produce plastic parts by injecting molten material into a mold. These machines play a critical role in mass production processes across industries such as automotive, medical, and consumer goods. Injection molders must be precise, durable, and efficient to meet the demands of high-volume production. They use a combination of heat and pressure to shape the plastic material into the desired form. Injection molders require skilled operators to ensure proper functioning and maintenance. Overall, Injection molders are essential equipment for cost-effective and scalable production of plastic components in various industries.
-
Meiki MDMI DVD CD Disc Injection Mold Tool Kata Systems w/ Adjusters For Parts
Meiki
$500.00Was: $1,000.00Meiki MDMI DVD CD Disc Injection Mold Tool Kata Systems w/ Adjusters For Parts Meiki MDMI injection mold tool designed for DVD and CD optical disc production. This mold assembly is used with Kata Systems injection molding equipment to form polycarbonate...49473- SKU:
- 49473
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 245.00 LBS
- Brand:
- Meiki
- Model:
- MDMI
- MPN:
- MDMI
- Type:
- DVD/CD Disc Injection Mold Tool
- SKU:
- 49473
- Condition:
- As-Is / For Parts or Not Working
- Compatible With:
- Kata Systems Injection Molders
- Application:
- DVD / CD Optical Disc Injection Molding
- Includes:
- Mold with adjusters, vacuum fittings, air-blow ports
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Sold AS-IS with rust buildup; includes adjusters and multiple fittings
- Condition Notes:
- This Meiki MDMI DVD/CD Disc Injection Mold Tool is being sold AS-IS for parts or repair. The mold exhibits surface rust and oxidation that is visible across multiple exterior faces, most notably on the bottom/parting-line surfaces, as seen in the
$500.00Was: $1,000.00 -
Sumitomo SD30 Disk Injection Molding Machine 460V 3Ph Yushin DRD II-HS
Sumitomo
$4,200.00Was: $8,400.00Sumitomo SD30 Disk Injection Molding Machine 460V 3Ph Yushin DRD II-HSSumitomo Heavy Industries SD30 injection molding machine configured for CD, DVD, and Blu-Ray optical disc manufacturing. Equipped with Yushin DRD II-HS robotic arm and Netstal...49432- SKU:
- 49432
- Availability:
- Freight shipment required — contact us for a shipping quote before purchasing.
- Weight:
- 4,000.00 LBS
- Brand:
- Sumitomo Heavy Industries
- Model:
- SD30
- MPN:
- SD30
- Type:
- CD/DVD Disc Injection Molding Machine
- SKU:
- 49432
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes Yushin DRD II-HS robot arm and Netstal controller boards
- Country/Region of Manufacture:
- Japan
- Voltage Rating:
- 460V AC
- Current Rating:
- 35 Amps
- Phase:
- Three Phase
- Frequency:
- 60 Hz
- Motor Power:
- 15 kW
- Heater Power:
- 4.8 kW
- Wiring Diagram Number:
- M391370
- Robot Arm:
- Yushin DRD II-HS
- Controller:
- Netstal controller boards
- Hydraulic Unit:
- Sumitomo C110
- Application:
- CD / DVD / Blu-Ray optical disc manufacturing
- Form Factor:
- Floor Standing / Freestanding Industrial Machine
- Shipping Method:
- Freight required
- Licensed Under:
- Lemelson U.S. Pat. No. 4120922
- Condition Notes:
- Sumitomo SD30 disc injection molding machine sold as-is for parts or repair. Pulled from a CA disc manufacturing facility; appears mostly complete but could not be fully tested. Freight required. No functionality guarantee.
$4,200.00Was: $8,400.00 -
Matsui MCM-151 Injection Molder Mold Temperature Controller 460V 3Ph 60Hz
Matsui
$650.00Was: $1,300.00Matsui MCM-151 Injection Molder Mold Temperature Controller 460V 3Ph 60HzMold temperature controller for plastic injection molding machines. Maintains consistent mold temperatures during production cycles via circulating heated coolant through mold...47099- SKU:
- 47099
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 118.00 LBS
- Brand:
- Matsui
- Model:
- MCM-151
- MPN:
- MCM-151
- Type:
- Mold Temperature Controller
- SKU:
- 47099
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS for parts or repair. Untested. Speck Pumpen pump assembly included.
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Freestanding / Cart-Mounted
- Power Requirements:
- AC 460V, 3-Phase, 60Hz
- Voltage Rating:
- 460V AC
- Phase:
- Three Phase
- Frequency:
- 60Hz
- Motor Power:
- 0.5kW (1.4A)
- Heater Power:
- 2.0kW (2.5A)
- Pump Model:
- Speck Pumpen NPY-2251-0034/VA
- Application:
- Plastic Injection Molding
- Compatible With:
- Plastic injection molding machines requiring mold temp control
- Condition Notes:
- Matsui MCM-151 Mold Temperature Controller sold AS-IS for parts or repair. Pulled from a larger system; untested, no functionality guaranteed. Heavy rust and paint loss on exterior and interior. Speck Pumpen pump assembly present.
$650.00Was: $1,300.00 -
Netstal RFD 110.240.9936 Komplett Control Board Diskjet Injection Molding System
Netstal
$125.00Was: $250.00Netstal RFD 110.240.9936 Komplett Control Board Diskjet Injection Molding SystemThe Netstal RFD 110.240.9936 Komplett is a PCB control board designed for use in the Netstal Diskjet injection molding platform, also associated with the Steag Firstlight...45996- SKU:
- 45996
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- RFD 110.240.9936
- MPN:
- 110.240.9936
- Type:
- System Control Board / PCB Module
- SKU:
- 45996
- Condition:
- Used – Pulled from Working Environment
- Compatible With:
- Netstal Diskjet Injection Molding System
- Compatible With 2:
- Steag Firstlight Diskjet System
- Form Factor:
- Card / Module (PCB)
- Seller Notes:
- Board only; pulled from a working Netstal Diskjet injection molding system.
- Country/Region of Manufacture:
- Switzerland
- Application:
- Optical Disc / CD/DVD Injection Molding Control
- Connector Type:
- Multi-pin edge connector (parallel bus)
- Condition Notes:
- Netstal RFD 110.240.9936 Komplett control board pulled from a working Diskjet injection molding system. Good used condition; PCB clean, components intact, edge connector shows normal wear. Red pull tab present.
$125.00Was: $250.00 -
Netstal CUC 110.240.9468 Komplett System Control Board Injection Molder PCB
Netstal
$275.00Was: $550.00Netstal CUC 110.240.9468 Komplett System Control Board Injection Molder PCBThis is a Netstal CUC 110.240.9468 Komplett system control board, a printed circuit board (PCB) designed for use in Netstal injection molding machines. The board carries the part...45985- SKU:
- 45985
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Netstal
- Model:
- CUC 110.240.9468
- MPN:
- 110.240.9468a
- Type:
- Komplett System Control Board / PCB
- SKU:
- 45985
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a working Netstal injection molder
- Compatible With:
- Netstal injection molding machines (CUC series)
- Form Factor:
- Card / Module (PCB)
- Application:
- Injection Molder Machine Control
- Connector Types:
- DB9 serial ports (x2), edge connectors, ribbon cable headers
- Country/Region of Manufacture:
- Switzerland
- Condition Notes:
- Netstal CUC 110.240.9468 Komplett system board. Inspected and in good condition; pulled from a working injection molder where it was in active use and functional. Board is clean with no visible damage.
$275.00Was: $550.00 -
Sailor OE-2413 Robot Arm Injection Molder Sprue Picker 3PH 480V 5A 1999
Sailor
$550.00Was: $1,100.00Sailor OE-2413 Robot Arm Injection Molder Sprue Picker 3PH 480V 5A 1999Pneumatic robot arm designed for automated sprue and runner removal from injection molds. Built by Sailor (The Sailor Pen Co., Ltd., Tokyo) in 1999, this unit was pulled from a...45584- SKU:
- 45584
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 130.00 LBS
- Brand:
- Sailor
- Model:
- OE-2413
- MPN:
- OE-2413
- Type:
- Injection Molder Robot Arm / Sprue Picker
- SKU:
- 45584
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- Japan
- Manufacturer:
- The Sailor Pen Co., Ltd., Tokyo, Japan
- Year of Manufacture:
- 1999
- Power Requirements:
- 3PH 480V 5A
- Phase:
- Three Phase
- Voltage Rating:
- 480V
- Current Rating:
- 5A
- Compatible With:
- Meike Plastic Injection Molder
- Application:
- Sprue / runner removal from injection mold
- Gripper Type:
- Pneumatic sprue gripper
- Pressure Gauge:
- SMC 0–1 MPa analog pressure gauge (Sprue Grip)
- Vacuum/Pressure Controller:
- SMC DP2-20 digital pressure switch
- Included Cables:
- Multi-conductor wiring harness with SWING and HORIZ connectors
- Connector Types:
- SWING connector, HORIZ connector (labeled on cable ends)
- Seller Notes:
- Includes wiring harness with SWING and HORIZ connectors
- Condition Notes:
- Sailor OE-2413 injection molder robot arm pulled from a working plastic injection molder. Appears in good used condition with light surface wear. Includes wiring harness with SWING and HORIZ connectors. 3PH 480V 5A.
$550.00Was: $1,100.00 -
Meike MDMI Blu-Ray DVD CD Injection Mold 8cm Disc U-Tech Media Kata Systems
Meike
$650.00Was: $1,300.00Meike MDMI Blu-Ray DVD CD Injection Mold 8cm Disc U-Tech Media Kata SystemsThis is a Meike MDMI injection mold designed for producing 8cm optical discs — compatible with Blu-Ray, DVD, and CD formats. The mold is a precision steel tooling assembly used in...45566- SKU:
- 45566
- Availability:
- Freight shipping required due to size and weight. Contact us for a freight quote before purchasing.
- Weight:
- 245.00 LBS
- Brand:
- Meike
- Model:
- MDMI
- MPN:
- MDMI
- Type:
- Optical Disc Injection Mold
- SKU:
- 45566
- Condition:
- Used – Pulled from Working Environment
- Compatible Disc Formats:
- Blu-Ray, DVD, CD
- Disc Diameter:
- 8cm
- Previous Owner:
- U-Tech Media USA
- Asset / Property Tag:
- Z-R-14-93
- Application:
- Optical disc (Blu-Ray/DVD/CD) injection molding production
- Material:
- Steel / Stainless Steel tooling
- Cooling / Air Fittings:
- Multiple pneumatic and coolant fittings visible
- Shipping Method:
- Freight required
- Seller Notes:
- Pulled from U-Tech Media USA working production environment; freight shipping required
- Condition Notes:
- Meike MDMI Blu-Ray/DVD/CD injection mold inspected and in good used condition. Pulled from a working U-Tech Media USA production environment. Normal production wear on exterior. All fittings and components appear intact. Freight shipping required.
$650.00Was: $1,300.00 -
Meiki MDMI DVD CD Injection Mold Tool w/ Adjusters Quick Change Kata Systems
Meike
$900.00Was: $1,800.00Meiki MDMI DVD CD Injection Mold Tool w/ Adjusters Quick Change Kata SystemsThis is a steel injection mold tool from Meiki Co., Ltd. (Ohbu City, Aichi, Japan), designed for molding DVD and CD optical discs on injection molding equipment. The mold is of...45565- SKU:
- 45565
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 245.00 LBS
- Brand:
- Meiki
- Model:
- MDMI
- MPN:
- MDMI
- Type:
- Injection Mold Tool / Mold Die
- SKU:
- 45565
- Application:
- DVD / CD Optical Disc Injection Molding
- Compatible With:
- Kata Systems DVD/CD disc injection molding machines
- Features:
- Quick Change fittings, water cooling ports, adjusters
- Mold Configuration:
- Multi-section steel mold with CL side and INJ side
- Cooling:
- Water-cooled (cooling line ports visible)
- Sprue Type:
- Sprue Out port labeled on mold face
- Condition:
- Used – Inspected
- Country/Region of Manufacture:
- Japan
- Manufacturer Location:
- Ohbu City, Aichi, Japan
- Patent Numbers:
- 21386, 新型第119740号 (JP)
- Seller Notes:
- Includes mold tool with adjusters and quick-change fittings as shown
- Condition Notes:
- Meiki MDMI DVD/CD injection mold tool, inspected and in good used condition. Shows typical surface wear, marks, and heat discoloration from production use. Quick-change fittings and ejector rods present and intact.
$900.00Was: $1,800.00