Clicky

New

  • Ametek Pittman GM9236S014 DC Gearmotor 12V 24VDC 5.9:1 Ratio Brushed

    Ametek Pittman GM9236S014 DC Gearmotor 12V 24VDC 5.9:1 Ratio Brushed

    Ametek

    $100.00
    Was: $250.00
    Ametek Pittman GM9236S014 DC Gearmotor 12V 24VDC 5.9:1 Ratio BrushedThe Ametek Pittman GM9236S014 is a brushed DC gearmotor designed for 12V to 24VDC operation. It features a 5.9:1 gear ratio that...
    53361
    SKU:
    53361
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Ametek Pittman
    Model:
    GM9236S014
    MPN:
    GM9236S014
    SKU:
    53361
    Condition:
    Used – Pulled from Working Environment
    Motor Type:
    Brushed DC Gearmotor
    Voltage Rating:
    12V to 24VDC
    Gear Ratio:
    5.9:1
    Form Factor:
    Compact Brushed Motor
    Applications:
    Robotics, Conveyors, Medical Equipment, Industrial Automation
    Seller Notes:
    Unit pulled from working environment. Verify mounting and shaft requirements before installation.
    Condition Notes:
    This Ametek Pittman GM9236S014 DC gearmotor was pulled from a working environment and has not been powered up or tested at our facility. It shows minor cosmetic wear consistent with previous use.
  • National Instruments PCI-6034E DAQ card front view showing metal EMI shield and 68-pin SCSI connector on bracket National Instruments 6034E PCI DAQ card angled side view showing EMI shield label and dual connectors

    National Instruments PCI-6034E DAQ Card 200 kS/s 16-Bit 16-Ch 68-Pin NI-DAQ

    National Instruments

    $125.00
    National Instruments PCI-6034E DAQ Card 200 kS/s 16-Bit 16-Ch 68-Pin NI-DAQ Multifunction data acquisition card for PCI desktop systems. Captures analog signals with 16 simultaneous input channels at...
    53360
    SKU:
    53360
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.74 LBS
    Brand:
    National Instruments
    Model:
    PCI-6034E
    Secondary Model:
    6034E
    MPN:
    187576G-01
    Secondary MPN:
    780888-01
    SKU:
    53360
    Condition:
    Used
    Seller Notes:
    Card only; no software or accessories confirmed included.
    Form Factor:
    PCI Card
    Interface:
    Standard PCI
    Analog Inputs:
    16
    Resolution:
    16-Bit
    Sample Rate:
    200 kS/s
    Connector Type:
    68-Pin SCSI-Style
    EMI Shielding:
    Metal EMI Shield Included
    Compatible With:
    NI-DAQ, LabVIEW, standard PCI desktop systems
    Country of Manufacture:
    Hungary
    Product Type:
    Multifunction Data Acquisition Card
  • Capstone C65 65kW microturbine generator on pallet in warehouse – full front-left view showing white multi-module enclosure Capstone C65 microturbine generator shown outdoors in industrial setting – front and right-side view with exhaust ducting visible

    Capstone C65 65kW CHP Microturbine Generator 480V 3-Phase Natural Gas

    Capstone

    $65,000.00
    Was: $150,000.00
    Capstone C65 65kW CHP Microturbine Generator 480V 3-Phase Natural Gas 65R-SD4-BU00 Gas microturbine generator for distributed power generation and combined heat and power (CHP) applications. Operates...
    53359
    SKU:
    53359
    Availability:
    This is a large industrial item — please contact us for freight shipping options and lead time before purchasing.
    Weight:
    5,000.00 LBS
    Brand:
    Capstone Turbine Corporation
    Model:
    C65
    MPN:
    65R-SD4-BU00
    Secondary Model:
    522108-100 (Fuel Gas Booster)
    SKU:
    53359
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes integrated fuel gas booster module (522108-100)
    Country of Manufacture:
    USA
    Form Factor:
    Freestanding / Skid-Mounted
    Power Output:
    65 kW (81 kVA) nominal
    Power Requirements:
    400-480 VAC, 3-Phase, 4-Wire Wye, 50/60 Hz
    Voltage Rating:
    400-480 VAC
    Phase:
    Three Phase
    Frequency:
    50/60 Hz
    Current Rating:
    100A
    Electrical Efficiency:
    ~29% (LHV)
    Fuel Type:
    Natural Gas, Propane, Biogas / Digester Gas
    CHP Configuration:
    Combined Heat and Power (CHP)
    Thermal Output (ICHP):
    Up to 122 kW (0.42 MMBTU/hr) hot water
    Exhaust Gas Temperature:
    309°C (588°F) – heat recovery bypassed
    Exhaust Gas Flow:
    0.49 kg/s (1.08 lbm/s)
    Generator Type:
    Gas Microturbine Generator
    Operating Mode:
    Grid-Connect or Dual-Mode
    Date of Manufacture:
    10/20/2015
    Certifications:
    UL Listed – Engine-Generator for Prime Power Use
    Application:
    Distributed power generation, CHP, biogas utilization
    Fuel Gas Booster Model:
    522108-100
    Fuel Gas Booster Max Discharge Pressure:
    125.0 PSIG (8.6 BAR G)
    Fuel Gas Booster Voltage:
    160 VAC
    Fuel Gas Booster Peak Operating Amps:
    10.0 A
    Condition Notes:
    This Capstone C65 65kW CHP Microturbine Generator (model 65R-SD4-BU00) was removed from a local brewery where it operated on digester gas recovered from spent water processing. The brewery has since closed.
  • Omron J7L-50 contactor coil and mechanical components Omron J7L-50 contactor nameplate with specifications

    Omron J7L-50 IEC Industrial Contactor 240VAC 55A 15kW 3-Phase Motor Control

    Omron

    $90.00
    Was: $425.00
    Omron J7L-50 IEC Industrial Contactor 240VAC 55A 15kW 3-Phase Motor ControlThe Omron J7L-50 is an IEC-compliant industrial contactor designed for three-phase motor control applications. This unit is...
    53358
    SKU:
    53358
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Omron
    Model:
    J7L-50
    MPN:
    J7L-50
    SKU:
    53358
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no accessories included
    Country of Manufacture:
    Korea
    Form Factor:
    DIN Rail / Panel Mount
    Voltage Rating:
    240VAC (AC3); rated to 690VAC maximum
    Current Rating:
    55A (AC3 @ 240V); Continuous 70A
    Power Rating:
    15kW @ 240V, 3-Phase, 50/60Hz
    Phase:
    3-Phase
    Frequency:
    50/60Hz
    Power Requirements:
    Coil: per order suffix; Load: up to 690VAC
    Standards Compliance:
    IEC, EN, VDE, BS
    Certifications:
    CE, UL, IEC 60947, EN 60947, VDE 0660
    Max Voltage (Ue):
    690V
    Wire Gauge:
    AWG 8–4, 60/75°C Copper
    Torque:
    40 lb-in
    Aux Contact:
    A600 P600
    Short Circuit Rating:
    9kA RMS Sym @ 600V (100A fuse protected)
    Compatible With:
    Omron J7L series accessories, IEC motor starters
    Condition Notes:
    This Omron J7L-50 IEC Industrial Contactor has been inspected and appears to be in good condition. It was pulled from a working environment where it was in operational use. Please view our photo set and contact us if you have any questions.
    Maximum Voltage:
    690V (Ue)
    Auxiliary Contact:
    A600 P600