Solar Panel Manufacturing Materials

Solar Panel Manufacturing Materials

Solar panel manufacturing materials refer to the key components used in the production of solar panels. These materials include silicon wafers, solar cells, glass sheets, back sheets, front sheets, frames, and junction boxes. Silicon wafers are the building blocks of solar cells, while glass sheets provide protection and durability. Back sheets and front sheets act as protective layers, with the back sheet protecting the electrical components and the front sheet protecting the solar cells. Frames provide structural support, while junction boxes connect the panels to each other. Overall, these materials are essential in the production of high-quality solar panels.

  • End flange assembly and structural mounting interface – rear view detail Solar thin-film processing roller assembly with dual flanged end caps and foil wrap – overall side view

    Solar Thin-Film Processing Roller Dual Flange Foil Assembly Industrial

    Generic

    Solar Thin-Film Processing Roller Dual Flange Foil Assembly Industrial This is a large industrial cylindrical roller assembly designed for roll-to-roll processing of flexible photovoltaic (PV)...
    53340
    SKU:
    53340
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    515.00 LBS
    Brand:
    Unbranded
    Model:
    Industrial Solar Material Processing Roller
    SKU:
    53340
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Dual flanged roller with foil assembly; surface rust visible; structurally intact
    Form Factor:
    Large Cylindrical Roller on Pallet
    Application:
    Solar thin-film PV processing, roll-to-roll material handling
    Material Type:
    Metal roller body with foil wrap, dual flanged end caps
    End Flange Configuration:
    Dual flanged ends with bolt-pattern mounting hubs
    Surface Condition:
    Surface rust visible on foil layer and end flange assemblies
    Compatible With:
    Solar thin-film processing lines, roll-to-roll equipment
    Industry:
    Solar Manufacturing, Photovoltaic Thin-Film Processing
    Condition Notes:
    This solar thin-film processing roller was pulled from a decommissioned manufacturing system. Visually inspected; surface rust is visible on the foil layer and end flanges, but the roller body and mounting flanges remain structurally sound.
    Mounting Type:
    Bolt-pattern mounting hubs on both flanges
    Country of Manufacture:
    Unknown
    Material:
    Metal roller body with foil wrap, dual flanged end caps
    Construction:
    Metal roller body with foil wrap, dual flanged end caps
    End Configuration:
    Dual flanged with structural mounting interfaces
    Structural Integrity:
    Roller body and flanges are structurally sound
    Typical Applications:
    CIGS, amorphous silicon, and thin-film PV production workflows
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
  • CoveMe AHDPYE-SPV-LBK Solar Panel Backsheet 200M roll mounted on black plastic display spool with glass corner supports – front view CoveMe AHDPYE-SPV-LBK Solar Panel Backsheet 200M roll on black plastic spool – angled side view showing roll diameter and support frame

    CoveMe AHDPYE-SPV-LBK Dymat PYE/AL Solar Panel Backsheet 1000mm 200M Roll

    CoveMe

    $1,354.00
    Was: $2,000.00
    CoveMe AHDPYE-SPV-LBK Dymat PYE/AL Solar Panel Backsheet 1000mm 200M Roll Customized PYE/AL laminate backsheet for solar PV module manufacturing. This is a 200-meter production roll designed for use...
    53294
    SKU:
    53294
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    185.00 LBS
    Brand:
    CoveMe
    Model:
    AHDPYE-SPV-LBK
    MPN:
    AHDPYE-SPV-LBK
    SKU:
    53294
    Condition:
    Open Box – New old stock, may be past best-before date
    Seller Notes:
    One 200M roll on display spool with protective wrap; Open Box
    Form Factor:
    Roll
    Material Type:
    Dymat PYE/AL Laminates – Customized Backsheet
    Thickness:
    400 µm
    Width:
    1000 mm
    Length:
    200 M
    Core:
    3
    Splices:
    0
    Primer Coated:
    Yes – Outside and Inside
    Certifications:
    TUV recognized; UL recognized (E203508)
    Standards:
    EN ISO 9001:2008 certified
    Lot Number:
    9170277-4
    Customer Reference:
    006-381 / 355248 00001
    CoveMe Reference:
    AHDPYE-SPV-LBK
    Production Date:
    21 April 2017
    Best Before Date:
    April 2019
    Application:
    Solar panel module backsheet – PV module manufacturing
    Compatible With:
    Solar PV module laminators and panel production lines
    Country of Manufacture:
    Italy
    Condition Notes:
    This CoveMe AHDPYE-SPV-LBK Dymat PYE/AL Solar Panel Backsheet is new-old-stock material that has not been used or cut. The roll is intact and fully wrapped, mounted on a black plastic display spool with glass corner supports as shown in the photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $1,354.00
    Was: $2,000.00
  • Base of CoveMe backsheet roll carrier frame showing corner feet and bottom support structure with green edge guide string CoveMe APYE-50AL9-190 Dymat PYE AL solar panel backsheet roll on black plastic carrier frame, three-quarter view

    CoveMe APYE-50AL9-190 Dymat PYE AL Solar Panel Backsheet 1060mm 100m Roll

    CoveMe

    $500.00
    Was: $1,000.00
    CoveMe APYE-50AL9-190 Dymat PYE AL Solar Panel Backsheet 1060mm 100m Roll PYE/AL laminate backsheet film for photovoltaic module manufacturing. This material serves as the rear protective layer in...
    53293
    SKU:
    53293
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    150.00 LBS
    Brand:
    CoveMe
    Model:
    APYE-50AL9-190
    MPN:
    APYE 50/AL9/190/EE 1060 G 100
    SKU:
    53293
    Condition:
    Open Box – New old stock, may be past expiration date
    Seller Notes:
    One roll of backsheet film on original core with plastic carrier frames
    Material Type:
    PYE/AL Laminate (Dymat Series)
    Width:
    1060 mm
    Length:
    100 m
    Quantity (Core):
    106 m total on core
    Thickness:
    380 µm
    Primer:
    Primer-coated outside and inside
    Certifications:
    TÜV, UL
    Lot Number:
    Z404B02-L
    Customer Reference:
    93536398 / 034286 00083
    CoveMe Reference:
    Available on label
    Production Date:
    May 2013
    Core Size:
    3 inch
    Splices:
    00
    Application:
    Solar panel backsheet / photovoltaic module manufacturing
    Country of Manufacture:
    Italy
    Form Factor:
    Roll
    Condition Notes:
    This CoveMe APYE-50AL9-190 Dymat PYE/AL Solar Panel Backsheet roll is new from the manufacturer and has not been used or unrolled. The label visible in our photos shows a production date of May 2013, and this roll has been in storage since that time
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • 3M UBF 510-F ETFE solar film roll inside open cardboard shipping box with blue tape securing roll to cardboard backing 3M Ultra Barrier Solar Film 510-F October 2016 technical datasheet showing product properties, optical transmission specs, WVTR, dielectric, and UL certification details

    3M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter

    3M

    $21.80
    Was: $60.00
    3M UBF 510-F ETFE Ultra Barrier Solar Film Top Sheet 352mm Wide per Meter The 3M UBF 510-F is a multi-layer ETFE (ethylene tetrafluoroethylene) barrier film designed as a front sheet / top sheet...
    53239
    SKU:
    53239
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    3M
    Model:
    UBF 510-F
    MPN:
    UBF 510-F
    Type:
    ETFE Ultra Barrier Solar Encapsulation Film
    SKU:
    53239
    Width:
    352 mm
    Unit of Sale:
    Sold by the meter (1 meter per unit)
    Film Material:
    ETFE (Ethylene Tetrafluoroethylene)
    Film Function:
    Front sheet / top sheet encapsulant for flexible solar modules
    Thickness:
    0.333 mm (13.10 mil) per ASTM D6988
    Tensile Strength:
    175 MPa per ASTM D882
    Elongation:
    12% per ASTM D882
    Shrinkage at 23°C (Balanced Layer):
    0.15% per ASTM 3M
    Optical Transmission:
    >80% (Avg 400–1400 nm) per 3M test method
    Partial Discharge (Dielectric):
    >1,000V per ASTMD 719 / IEC 61730-2 MST 11
    WVTR:
    <5 x 10^-4 g/m²/day @ 23°C, 85% RH
    Low Shrinkage:
    0.15%
    CTE:
    Low CTE
    Certifications:
    UL Certified Component (E316895)
    Application:
    Flexible thin-film CIGS solar panel manufacturing
    Compatible PV Module Type:
    Flexible thin-film PV modules
    Manufacture Year:
    2016
    Storage Condition:
    Plastic-sealed rolls; stored in original packaging
    Original Purchaser / Source:
    Solopower (Portland, OR) and Dow Solar (San Jose, CA)
    Seller Notes:
    Sold by the meter. To order multiple meters, increase quantity at checkout.
    Country/Region of Manufacture:
    United States
    Operating Temperature:
    -40°C to 100°C
    Processing Temperature:
    100°C for ~10 min per 3M datasheet
    Condition Notes:
    This 3M UBF 510-F ETFE Ultra Barrier Solar Film is new old stock manufactured in 2016. The rolls were originally purchased by Solopower in Portland, Oregon or Dow Solar in San Jose, California for use in flexible CIGS solar panel manufacturing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $21.80
    Was: $60.00
  • Quanex Solargain 614-5050-P93 Edge Tape box front label showing part number, lot 504223, and 4650 FT/1417 M total length Quanex Solargain 614-5050-P93 Edge Tape sealed cardboard box with product label and SoloPower part number label on right side

    Quanex Solargain 614-5050-P93 Edge Tape Primed Butyl 12.7x1.27mm 4650 ft 19

    Quanex

    $200.00
    Was: $400.00
    Quanex Solargain 614-5050-P93 Edge Tape Primed Butyl 12.7x1.27mm 4650 ft 19 RollsButyl rubber edge glazing tape designed for sealing and insulating glass and ETFE flexible solar panel edges. Primed...
    53202
    SKU:
    53202
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    95.00 LBS
    Brand:
    Quanex
    Model:
    614-5050-P93
    MPN:
    614-5050-P93
    Secondary Model:
    420055-001
    Lot Number:
    504223
    SKU:
    53202
    Type:
    Butyl Rubber Edge Glazing Tape
    Product Family:
    Solargain Edge Tape
    Tape Width:
    12.7 mm
    Tape Thickness:
    1.27 mm
    Total Tape Length:
    4650 ft (1417 m)
    Quantity (Rolls per Box):
    19 rolls
    Release Backing:
    Blue release plastic, one side
    Surface Treatment:
    Primed
    Material:
    Butyl Rubber
    Compatible With:
    Glass and ETFE flexible solar panels
    Application:
    Edge glazing, insulator caulk for solar panels
    Packaging:
    Vacuum-sealed mylar bag, 19 rolls per box
    Date of Manufacture:
    05/19/2016
    Expiration Date:
    11/19/2016
    Country/Region of Manufacture:
    United States
    Condition:
    New — vacuum-sealed in original box
    Seller Notes:
    19 rolls per box, vacuum-sealed in thick mylar bag. SoloPower P/N 420055-001.
    Certifications:
    UL Listed (UL mark on box label)
    Set Code:
    LP02
    Box Number:
    7
    Moisture Sensitivity:
    Moisture Sensitive — keep containers sealed at all times
    Condition Notes:
    New unused, 19 rolls, vacuum-sealed. Mfg 05/19/2016, exp 11/19/2016 (past shelf life). Tested, excellent condition. Box has storage wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Jura-Plast Type TL solar cell encapsulant film roll – angled view showing translucent blue film on cardboard core Jura-Plast Type TL encapsulant film roll – side profile view showing full roll length

    Jura-Plast GmbH Type TL Solar Cell Encapsulant Film 1116mm x 75M 0.6mm 83.7sqm

    Jura-Plast GmbH

    $300.00
    Was: $600.00
    Jura-Plast GmbH Type TL Solar Cell Encapsulant Film 1116mm x 75M 0.6mm 83.7sqmSolar cell encapsulant film used in photovoltaic module lamination. This material provides protection and adhesion...
    53148
    SKU:
    53148
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    85.00 LBS
    Brand:
    Jura-Plast GmbH
    Model:
    Type TL
    MPN:
    610041-001
    SKU:
    53148
    Type:
    Solar Cell Encapsulant Film
    Width:
    1116 mm (1.116 m)
    Length:
    75 m
    Thickness:
    0.6 mm
    Coverage Area:
    83.7 sq m per roll
    Roll Format:
    Single roll on cardboard core
    Application:
    Solar panel / photovoltaic module lamination
    Country/Region of Manufacture:
    Germany
    Lot:
    SAMPLE (per box label)
    Condition:
    Open Box – Like New, original box, from solar co. closeout
    Seller Notes:
    One roll in original box. Open box from solar company closeout.
    Condition Notes:
    Jura-Plast Type TL Solar Encapsulant Film 1116mm x 75M, like-new, never used. Open box from solar company closeout. Roll intact in original box; outer box shows shipping wear. P/N 610041-001.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • 3M UBF-9L ETFE Ultra Barrier Solar Film roll inside open 3M cardboard box — top view showing white film roll 3M Ultra Barrier Solar Film UBF-9L key properties slide — WVTR, transmission, low shrinkage, UL E316895 specs

    3M UBF-9L ETFE Ultra Barrier Solar Film Top Sheet 398mm Wide per Meter

    3M

    $20.00
    Was: $40.00
    3M UBF-9L ETFE Ultra Barrier Solar Film Top Sheet 398mm Wide per MeterETFE ultra barrier top sheet film designed for flexible thin-film solar module lamination. Functions as the front protective...
    52787
    SKU:
    52787
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    3M
    Model:
    UBF-9L
    MPN:
    UBF-9L
    Type:
    ETFE Ultra Barrier Solar Top Sheet Film
    SKU:
    52787
    Material:
    ETFE (Ethylene Tetrafluoroethylene)
    Width:
    398mm
    Sold As:
    Per linear meter
    Roll Length Available:
    Single meters or full rolls (~100m to 300m+)
    Date Code / Manufacture Year:
    2012–2013
    WVTR:
    5±3 x 10⁻⁵ g/m²/day (NREL Ca Test, 45°C/85% RH)
    Optical Transmission:
    >89% avg, 400–1400nm wavelength range
    Partial Discharge Rating:
    1,000V
    UL Certification:
    UL Certified Component E316895
    Application:
    Solar lamination — flexible thin film solar front sheet
    Features:
    Low shrinkage, low CTE, improved adhesion to edge seals
    Country/Region of Manufacture:
    United States
    Condition:
    New – Open Box (new material, original 3M box)
    Seller Notes:
    Sold by linear meter; contact us for full roll pricing
    Condition Notes:
    3M UBF-9L ETFE Ultra Barrier Solar Film — new and unused in original 3M box. Date code 2012–2013. Sourced from Solopower (Portland, OR) when they closed. Sold by the linear meter; contact us for full rolls.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Jura-Plast jurasol PV Flatfilm Type TL EVA solar encapsulant roll wrapped in clear plastic protective film Top view of Jura-Plast Type TL EVA encapsulant roll showing blue film wound on cardboard core

    Jura-Plast jurasol PV Flatfilm Type TL EVA Solar Encapsulant 1116mm TL-1116-600

    Jura-Plast GmbH

    $7.00
    Was: $20.00
    Jura-Plast jurasol PV Flatfilm Type TL EVA Solar Encapsulant 1116mm TL-1116-600This is Jura-Plast GmbH's jurasol PV Flatfilm, Type TL — an ethylene vinyl acetate (EVA) solar cell encapsulation film...
    52738
    SKU:
    52738
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Jura-Plast GmbH
    Model:
    Type TL
    MPN:
    TL-1116-600
    Article Number:
    TL-1116-600
    Order Number:
    160507/1
    Type:
    EVA Solar Cell Encapsulation Film
    Product Name:
    jurasol PV Flatfilm
    SKU:
    52738
    Width:
    1116 mm (1.116 m)
    Thickness:
    0.600 mm (0.6 mm)
    Roll Length (Full Roll):
    300 m
    Roll Area (Full Roll):
    334.80 m²
    Sold By:
    Meter (price per meter)
    Material:
    Ethylene Vinyl Acetate (EVA)
    Application:
    Solar Panel / PV Module Encapsulation
    Color:
    Blue (blue release film — remove before lamination)
    Manufacture Year:
    2016
    Certifications:
    UL Listed (UL mark visible on label)
    Country/Region of Manufacture:
    Germany
    Condition:
    New – Plastic-sealed roll, stored unused since 2016
    Seller Notes:
    Sold by the meter; multiple meters shipped as one continuous piece from roll.
    Condition Notes:
    Jura-Plast Type TL EVA solar encapsulant film, article TL-1116-600. Manufactured 2016, plastic-sealed in storage. Appears in good usable condition. Sold by the meter; multiple meters shipped as one continuous piece.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $7.00
    Was: $20.00
  • DNP Z777 PV-FS TPO solar panel encapsulant roll in original cardboard shipping box with plastic wrapping intact Box label showing DNP Electronics/DOW supplier, Z777 encapsulant description, 400um thickness, 1100mm width, 500m length, part number 202091, date 10/5/2016

    DNP Z777 PV-FS TPO Solar Panel Encapsulant 1100mm Wide 400um EVA Replace

    DNP Solar

    $9.00
    Was: $17.50
    DNP Z777 PV-FS TPO Solar Panel Encapsulant 1100mm Wide 400um EVA ReplaceTPO (Thermal PolyOlefin) solar panel encapsulant film manufactured by DNP. Used in solar module lamination as an EVA-compatible...
    52689
    SKU:
    52689
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    DNP (Dai Nippon Printing)
    Model:
    Z777
    MPN:
    Z777
    Part Number:
    202091
    Order Number:
    23131865
    Lot / ID Number:
    T-23131865-0012
    Type:
    TPO Solar Panel Encapsulant Film
    Material:
    Thermal PolyOlefin (TPO)
    Product Series:
    PV-FS
    Width:
    1100 mm
    Thickness:
    400 µm (micrometers)
    Roll Length:
    500 m
    Embossed Side:
    Outside
    Compatible Application:
    Solar module lamination — EVA-compatible replacement
    Country/Region of Manufacture:
    Japan
    Manufacturer Plant:
    DNP EnergySystem Co., Ltd. — Izumizaki Plant
    Production Date:
    05 April 2016
    Sold As:
    By the meter — increase order quantity for more meters
    SKU:
    52689
    Condition:
    New — manufactured 2016, plastic-sealed roll, stored
    Seller Notes:
    Sold by the meter. Increase qty for multiple meters. Roll appears in good usable condition.
    Condition Notes:
    DNP Z777 PV-FS TPO solar encapsulant roll, manufactured new April 2016. Plastic-sealed throughout storage and appears in good usable condition. Sold by the meter — increase qty for multiple meters.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $9.00
    Was: $17.50
  • Royal PVA-600BT-14.4 butyl tacky tape roll with kraft paper backing, side view showing full roll width Royal PVA-600BT butyl tape close-up showing black adhesive layer with kraft paper release liner being peeled back

    Royal PVA-600BT-14.4 Butyl Tacky Tape PV Module Attachment 14.4in x 0.030in

    Royal

    $5.00
    Was: $10.00
    Royal PVA-600BT-14.4 Butyl Tacky Tape PV Module Attachment 14.4in x 0.030inButyl adhesive tape designed for bonding photovoltaic modules and solar panels to roofing surfaces. Peel-and-stick...
    52663
    SKU:
    52663
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Royal Adhesives & Sealants
    Model:
    PVA-600BT-14.4
    MPN:
    140-180890-00
    Secondary Model:
    731134-11567
    Type:
    Butyl Tacky Adhesive Tape
    SKU:
    52663
    Width:
    14.4 inches
    Thickness:
    0.030 inches
    Roll Length:
    170 ft (sold by the foot)
    Lot Number:
    PMI-1115-0675
    Date of Manufacture:
    11/23/2015
    Application:
    PV Module Attachment, Solar Panel Bonding
    Compatible Substrates:
    EPDM, TPO, Metal Roofing Panels
    Compatible Substrates 2:
    Modified Bitumen Roofing (granulated & non-granulated)
    Adhesive Type:
    Butyl
    Bonding Method:
    Peel and Stick (no primer required)
    Unit of Sale:
    Per Foot
    Seller Notes:
    Cut from a new 14.4 in x 170 ft x 0.030 in roll. Sold by the foot.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Royal PVA-600BT-14.4 butyl tacky tape, new and uninstalled. Cut from a new 14.4in x 170ft x 0.030in roll. Tape and release liner are intact. Listed Open Box as it is sold by the foot from a larger roll.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $5.00
    Was: $10.00
  • Staubli Multicontact MC3 solar connector cables lot of 10 — two bundles showing male MC3 connectors and brass terminal clip ends Two bundles of MC3 solar cables side by side — close view of black MC3 female connector ends and brass terminal ends

    Staubli Multicontact MC3 Solar Panel Connector Cables 12 AWG 15" Male Female Lot

    Stäubli

    $65.00
    Was: $125.00
    Staubli Multicontact MC3 Solar Panel Connector Cables 12 AWG 15" Male Female Lot 10These are connector cables for MC3 solar panel systems, featuring paired male and female connectors with...
    52661
    SKU:
    52661
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Staubli Multicontact
    Model:
    MC3
    MPN:
    MC3
    Type:
    Solar Panel Connector Cable
    SKU:
    52661
    Connector Type:
    MC3 (Male and Female)
    Wire Gauge:
    12 AWG
    Cable Length:
    15 inches
    Gender:
    Male and Female (paired)
    Terminal End:
    3/8" Brass Terminal Clips (removable)
    Quantity:
    Lot of 10
    Condition:
    New – Unused
    Compatible With:
    MC3 solar panels, charge controllers, PV systems
    Application:
    Solar PV panel wiring, charge controller connections
    Seller Notes:
    Lot of 10 new MC3 cables, male and female, with brass terminal clips installed
    Country/Region of Manufacture:
    Switzerland
    Condition Notes:
    Staubli MC3 solar connector cables, new and unused from manufacturer. Purchased in bulk, never installed. Brass terminal clips pre-installed on all cable ends. No wear. Lot of 10.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Stäubli MC4 solar panel cable sets lot of 10 male and female pairs bundled together, 14 AWG black PV wire with white zip ties Stäubli MC4 solar cable sets separated into male connector bundle (left) and female connector bundle (right), showing both connector styles

    Stäubli MC4 Solar Panel Cable Sets 14 AWG 11in PV Wire 600V Lot of 10 Pairs

    Stäubli

    $38.90
    Was: $100.00
    Stäubli MC4 Solar Panel Cable Sets 14 AWG 11in PV Wire 600V Lot of 10 Pairs MC4 connector pigtail cable sets used for solar panel wiring. Each set includes one male and one female MC4 connector with...
    52647
    SKU:
    52647
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Stäubli
    Model:
    MC4
    MPN:
    MC4
    Type:
    Solar Panel Cable Set / MC4 Connector Pigtail
    SKU:
    52647
    Connector Type:
    MC4 (Male and Female)
    Wire Gauge:
    14 AWG
    Wire Length:
    11 inches (approx. 28 cm)
    Wire Diameter:
    1/4 in (6.5 mm)
    Voltage Rating:
    600V
    Temperature Rating:
    90°C
    Wire Type:
    PV Wire – Wet or Dry, UL E300485
    Wire Insulation:
    PV Wire 14AWG 90C Wet or Dry 600V
    Cable Jacket Marking:
    STUDERCABLES.COM SWITZERLAND
    UL Rating:
    UL 4703 FLEX 125 600/1000V
    Quantity:
    Lot of 10 Male/Female Pairs (20 connectors total)
    Gender:
    Male and Female (one of each per set)
    Application:
    Solar Panel PV System Wiring
    Compatible With:
    Standard MC4-compatible solar panels and inverters
    Country/Region of Manufacture:
    Switzerland
    Condition:
    New – Old Stock from Solopower Portland OR facility
    Seller Notes:
    Lot of 10 male/female MC4 cable sets, new old stock from Solopower
    Condition Notes:
    Stäubli MC4 solar cable sets, 14 AWG, 11in — brand new old stock from Solopower Portland OR facility closure. Connectors unused; cable ends are cut/stripped from factory prep. No original packaging. Lot of 10 pairs.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $38.90
    Was: $100.00
  • Staubli MC4 solar cable pair showing male and female connectors with 11-inch black PV wire leads Close-up of Staubli MC4 male and female connectors — female shows 'Do not disconnect under load' safety label

    Staubli MC4 Solar Panel Cable Pair Male Female 14 AWG PV Wire 11in 600V

    Stäubli

    $4.00
    Was: $10.00
    Staubli MC4 Solar Panel Cable Pair Male Female 14 AWG PV Wire 11in 600V This is a single pair of MC4 connector cables for photovoltaic solar systems. The set includes one male and one female MC4...
    52646
    SKU:
    52646
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.45 LBS
    Brand:
    Staubli
    Model:
    MC4
    MPN:
    MC4
    Type:
    Solar Panel PV Cable Pair with MC4 Connectors
    SKU:
    52646
    Connector Type:
    MC4 (Male and Female)
    Wire Gauge:
    14 AWG
    Wire Length:
    11 Inches
    Voltage Rating:
    600V
    Temperature Rating:
    90°C
    Wire Type:
    PV Wire — Wet or Dry rated
    Wire Listing Code:
    E300485
    Quantity:
    1 Pair (1 Male + 1 Female)
    Wire End Condition:
    Flush cut — ends not pre-stripped
    Compatible With:
    Solar panels, charge controllers, combiner boxes
    Application:
    Photovoltaic (PV) solar panel wiring
    Country/Region of Manufacture:
    Switzerland
    Seller Notes:
    1 pair — 1 male + 1 female MC4 connector; wire ends are cut flush
    Condition Notes:
    Staubli MC4 Solar Cable Pair is new and unused. Wire ends are flush-cut (not pre-stripped). Exposed-wire photo is for reference only. Male and female MC4 connectors are in new condition. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $4.00
    Was: $10.00
  • Tesa 4129 PET Solar Panel Tape single roll 0.75in x 273yds transparent polyester film Tesa 4129 tape label showing part number 04129-00002-00, PET backing, acrylic adhesive, 0.75in x 273yds, Made in Germany

    Tesa 4129 PET Solar Panel Tape 04129-00002-00 0.75in x 273yds 2mil Acrylic

    Tesa

    $33.40
    Was: $70.00
    Tesa 4129 PET Solar Panel Tape 04129-00002-00 0.75in x 273yds 2mil Acrylic Polyester film tape with acrylic adhesive designed for solar panel assembly and secure film splicing. Provides UV, water,...
    52630
    SKU:
    52630
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Tesa
    Model:
    4129
    MPN:
    04129-00002-00
    Type:
    PET Polyester Film Tape
    GTIN:
    4042448301659
    SKU:
    52630
    Seller Notes:
    Single roll, new from manufacturer, original packaging.
    Country/Region of Manufacture:
    Germany
    Backing Material:
    2 mil Polyester Film (PET)
    Adhesive Type:
    Acrylic
    Width:
    0.75 in (19 mm)
    Length:
    273 yds (250 m)
    Thickness:
    2 mil
    Color:
    Transparent
    Quantity:
    1 Roll
    UV Resistant:
    Yes
    Water Resistant:
    Yes
    Chemical Resistant:
    Yes
    Tear Resistant:
    Yes
    Application:
    Solar Cell Securing, Film Splicing, Edge Protection
    Compatible Use:
    Solar panel manufacturing, photographic film, litho mounting
    Condition Notes:
    Tesa 4129 PET Solar Panel Tape 04129-00002-00 is new from the manufacturer. Full roll, 0.75in x 273yds, in original packaging. Packaging may be opened. Tape is unused and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $33.40
    Was: $70.00
  • 3M UBF-9L ETFE Ultra Barrier Spacer Film 30mm x 150m roll — top view on white background 3M UBF-9L ETFE Ultra Barrier Spacer Film roll showing film edge and semi-transparent backing on dark background

    3M UBF-9L ETFE Ultra Barrier Spacer Film 70-0066-6434 150m x 30mm Solar

    3M

    $7.10
    Was: $25.00
    3M UBF-9L ETFE Ultra Barrier Spacer Film 70-0066-6434 150m x 30mm Solar ETFE ultra barrier spacer film used as a top sheet and spacer layer in flexible thin film solar panel manufacturing. This...
    52452
    SKU:
    52452
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    3M
    Model:
    UBF-9L
    MPN:
    70-0066-6434
    Type:
    ETFE Ultra Barrier Spacer Film
    SKU:
    52452
    Material:
    ETFE (Ethylene Tetrafluoroethylene)
    Roll Width:
    30 mm (1.181 in)
    Roll Length:
    150 m (164 yds)
    Core Diameter:
    76 mm (3 in)
    Application:
    Solar Panel Manufacturing — Top Sheet / Spacer Layer
    Grade:
    Mineral
    Condition:
    New — Unused
    Seller Notes:
    Single new, unused roll sourced from Solopower solar manufacturing facility.
    Country/Region of Manufacture:
    United States
    Compatible With:
    Flexible thin film solar panel lamination processes
    Condition Notes:
    3M UBF-9L ETFE Ultra Barrier Spacer Film, PN 70-0066-6434. New and unused, in original sealed bag from Solopower solar manufacturing facility. 30mm x 150m x 76mm core. No cuts or defects visible.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $7.10
    Was: $25.00
  • 3M 1183 Tin-Plated Copper Foil EMI Shielding Tape 0.5in x 240yd roll — full side view showing roll profile and metallic foil surface 3M 1183 Copper Foil EMI Tape — close-up of tape edge and backing, showing metallic foil face and adhesive underside

    3M 1183 Tin-Plated Copper Foil EMI Shielding Tape 0.5in x 240yd Conductive

    3M

    $276.00
    Was: $500.00
    3M 1183 Tin-Plated Copper Foil EMI Shielding Tape 0.5in x 240yd Conductive Conductive EMI shielding tape with tin-plated copper foil and conductive adhesive. Designed for electromagnetic interference...
    52441
    SKU:
    52441
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    3M
    Model:
    1183
    MPN:
    1183
    Type:
    Conductive EMI Shielding Tape
    SKU:
    52441
    Foil Material:
    Tin-Plated Copper
    Foil Thickness:
    2.6 Mil
    Adhesive Type:
    Conductive Adhesive
    Width:
    0.5 in (1/2 inch)
    Length:
    240 yd
    Application:
    EMI Shielding, Grounding, Static Charge Draining
    Compatible With:
    Aluminum, Stainless Steel, Flexible Solar Cells
    Country/Region of Manufacture:
    United States
    Seller Notes:
    New old stock roll sourced from Dow Solar; sold as a single 240 yd roll.
    Condition Notes:
    3M 1183 Copper Foil EMI Tape, 0.5in x 240yd. New and unused. New old stock from Dow Solar — never put into service. Sold as a single 240-yard roll in original new condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $276.00
    Was: $500.00
  • Onamba PVU-B48-022 Staubli MC4 solar junction box cable sets — three bundled groups overview Single Onamba PVU-B48-022 MC4 cable set spread out with snap-in plastic junction box cover beside it

    Onamba PVU-B48-022 Staubli MC4 Solar Junction Box 11in Cable 10 Sets IP65

    Onamba

    $46.10
    Was: $250.00
    Onamba PVU-B48-022 Staubli MC4 Solar Junction Box 11in Cable 10 Sets IP65 Solar PV junction box sets with pre-assembled MC4 connector cables for photovoltaic system wiring. Each set includes a...
    52416
    SKU:
    52416
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    Onamba
    Model:
    PVU-B48-022
    MPN:
    PVU-B48-022
    Type:
    Solar PV Junction Box with MC4 Connectors
    SKU:
    52416
    Connector Type:
    Staubli MC4 Male and Female
    Cable Length:
    11 inches (approx. 280mm)
    Quantity:
    10 Sets (10x Male/Female cable pairs)
    Includes:
    10 M/F cable pairs, 20 snap-in plastic J-box covers
    Rated Voltage:
    UL: DC600V; Other: DC1000V
    Max Rated Current (No Diode):
    10A (Other) / 20A (UL) at 75°C
    Max Rated Current (With Diode):
    3.5A (Other) / 1.5A (UL) at 75°C
    Diode:
    None — area provided to add your own
    Wire Size Range:
    2.0–2.5 mm²
    Cable OD Range:
    6.2–6.6 mm
    Wire Gauge:
    14 AWG, PV Wire, 90°C, Wet or Dry, 600V
    Protection Degree:
    IP65 / IP67 (with potting)
    Flame Class:
    5VA
    Insulation Material:
    PPE/PPO
    Contact Material:
    Brass (tin plated)
    Conformity Standard:
    UL1703 Certificate No. E212185
    Compatible With:
    Solopower SP3 and SP1 Solar Panels
    Compatible With 2:
    General DIY and commercial solar PV systems
    Polarity Configuration:
    Individual Positive and Negative (separate J-boxes)
    Country/Region of Manufacture:
    Japan
    Seller Notes:
    10 sets: 10x M/F 11-in cable pairs with J-boxes + 20 snap-in covers. New open-box.
    Condition Notes:
    Onamba PVU-B48-022 Staubli MC4 solar junction box sets — new, unused open-box stock. No prior installation. Original packaging may be absent or opened. Product is in new condition. 10 sets included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $46.10
    Was: $250.00
  • Dae Kyung Phils 124S M65 diode chain assembly on cardboard reel — full reel side view Close-up of 124S M65 diode chain tape showing individual black diode components on white carrier strip

    Dae Kyung Phils 124S M65 SoloPower Flexible Solar Panel Diode Chain Assembly x10

    Dae Kyung Phils

    $15.00
    Was: $30.00
    Dae Kyung Phils 124S M65 SoloPower Flexible Solar Panel Diode Chain Assembly x10 Diode chain assembly for SoloPower flexible amorphous solar panels. Each unit measures 6mm long x 4mm wide x 1mm thick...
    52302
    SKU:
    52302
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.30 LBS
    Brand:
    Dae Kyung Phils. Inc.
    Model:
    124S M65
    MPN:
    124S M65
    SKU:
    52302
    Condition:
    New – Open Box
    Seller Notes:
    Pack of 10 diode chain assemblies, new open-box, out of original packaging.
    Country of Manufacture:
    Philippines
    Compatible With:
    SoloPower Flexible Amorphous Solar Panels
    Item Description:
    Diode Chain Assembly
    Component Type:
    Diode Chain Assembly
    Diode Dimensions:
    6mm Long x 4mm Wide x 1mm Thick
    Lead-Free:
    Yes
    Lot Number:
    1648
    Purchase Order:
    21470
    Customer (OEM):
    Solopower Inc.
    Quantity in Pack:
    10
    Application:
    Flexible amorphous solar panel manufacturing/repair
    Condition Notes:
    These Dae Kyung Phils 124S M65 flexible solar panel diode chain assemblies are new from the manufacturer but have been removed from their original packaging, and are therefore sold as open-box. The components themselves are unused and uninstalled.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00
  • Amphenol Helios H4 HBTGBNANCNAA thin-film PV junction box assembly with 36-inch 14AWG dual cable leads and MC4-compatible male and female connectors, dust cap shown separately Close-up of Amphenol Helios H4 MC4-compatible male and female PV connector pair on 14AWG cable leads

    Amphenol Helios H4 HBTGBNANCNAA Thin Film PV Junction Box 14AWG MC4 36" Cable

    Amphenol

    $13.20
    Was: $35.00
    Amphenol Helios H4 HBTGBNANCNAA Thin Film PV Junction Box 14AWG MC4 36" Cable PV junction box for thin-film and rigid glass solar panel installations. Connects solar panel outputs to system wiring...
    52301
    SKU:
    52301
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Amphenol
    Model:
    Helios H4
    MPN:
    HBTGBNANCNAA
    Type:
    Thin-Film PV Junction Box with MC4 Connectors
    SKU:
    52301
    Condition:
    New
    Seller Notes:
    New original Amphenol Helios H4 J-box with 36" 14AWG MC4-compatible cable pair
    Country/Region of Manufacture:
    China
    Compatible With:
    Thin-film flexible solar panels, rigid glass solar panels
    Compatible Connector:
    MC4 (MC4-compatible)
    Cable Gauge:
    14 AWG (2.5mm²)
    Cable Length:
    1000mm (39.37" / approx. 36")
    Connector Style:
    Male and Female pair
    Rated Voltage:
    1500V DC (TÜV), 1000V DC (UL)
    Rated Current:
    Up to 20A
    Protection Rating:
    IP67
    Operating Temperature:
    -40°C to +90°C
    Termination Type:
    Soldering (solder contacts)
    Sealing Type:
    Potting
    Flame Class:
    UL94 5V
    Diode Quantity:
    None (1 contact / no diode — HBTGBNANCNAA config)
    Wire Rating:
    E467101-B (UL) 14AWG PV Wire, 105°C Dry, 90°C
    Product Line:
    Amphenol Helios JB — Thin Film PV Junction Box
    Application:
    Solar panel photovoltaic (PV) systems
    Form Factor:
    Low-profile over-molded junction box
    Condition Notes:
    New, unused Amphenol Helios H4 HBTGBNANCNAA PV junction box. Genuine Amphenol stock. Includes J-box body, MC4-compatible male/female connectors, dust cap, and 36" 14AWG PV cable leads.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $13.20
    Was: $35.00
  • Multi-Contact MC3 PV-ADBP panel mount connectors — lot of 10 male/female pairs with hex mounting nuts, overhead group view Multi-Contact MC3 PV-ADBP female (left) and male (right) panel mount connectors side by side, showing socket and pin faces

    Multi-Contact MC3 PV-ADBP Panel Mount Connector Lot 10 Pairs 32.0052 32.0053

    Multi-Contact

    $27.60
    Was: $100.00
    Multi-Contact MC3 PV-ADBP Panel Mount Connector Lot 10 Pairs 32.0052 32.0053 This lot contains 10 male/female pairs of Multi-Contact MC3 PV-ADBP panel mount connectors. These are a specialized...
    52259
    SKU:
    52259
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Multi-Contact
    Model:
    PV-ADBP
    MPN:
    32.0052 (Female) / 32.0053 (Male)
    Type:
    MC3 Panel Mount Connector Pair
    SKU:
    52259
    Connector Standard:
    MC3
    Gender:
    Male and Female (Pairs)
    Quantity:
    10 Pairs (10 Male + 10 Female)
    Mounting Style:
    Panel Mount (requires drilled panel cutout)
    Includes:
    10 male connectors, 10 female connectors, panel mounting nuts
    Female Part Numbers:
    32.0052, 32.0302, PV-ADBP 3/GWD, PV-A-ADBP3/GWD
    Male Part Numbers:
    32.0053, PV-ADBP3/GWD-UR
    Application:
    Solar PV enclosure / junction box panel feedthrough
    Wire Termination:
    Bare wire (internal, inside enclosure — not insulated)
    Country/Region of Manufacture:
    Switzerland
    Condition:
    New
    Condition Notes:
    Multi-Contact MC3 PV-ADBP panel mount connectors are new and unused. Lot of 10 male/female pairs with mounting nuts. PNs 32.0052 (female) & 32.0053 (male). No signs of use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $27.60
    Was: $100.00