Calibration Instruments
Calibration instruments are devices used to measure and adjust the accuracy of other instruments or equipment. These instruments are crucial in ensuring that measurements are precise and consistent. Common types of calibration instruments include calipers, micrometers, torque wrenches, pressure gauges, and temperature probes. Calibration instruments are typically used in industries such as manufacturing, engineering, and quality control to maintain the reliability and accuracy of measurement tools. Regular calibration of instruments is necessary to uphold industry standards and ensure the safety and quality of products. Proper use of calibration instruments guarantees that measurements are reliable and within acceptable limits.
-
Load Cell Transducer TI82-1K-10P1 1000 lb Force Sensor w/ Cable USA Made
Transducer
$125.00Was: $250.00Load Cell Transducer TI82-1K-10P1 1000 lb Force Sensor w/ Cable USA MadeThe TI82-1K-10P1 is a cylindrical inline load cell transducer rated for 1000 lb (1K lb) force measurement, with an attached multi-conductor cable terminating in a circular multi-pin...39245- SKU:
- 39245
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Unbranded
- Model:
- TI82-1K-10P1
- MPN:
- TI82-1K-10P1
- Type:
- Load Cell / Force Transducer
- SKU:
- 39245
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold AS-IS; includes attached multi-pin cable. No functionality guarantee.
- Country/Region of Manufacture:
- United States
- Capacity:
- 1000 lb (1K lb)
- Connector Type:
- Multi-pin circular military-style connector
- Cable Included:
- Yes — multi-conductor gray cable with circular connector
- Form Factor:
- Inline / Cylindrical
- Application / Use Case:
- Force measurement, tension/compression testing, industrial
- Serial Number (Internal):
- 73186
- Condition Notes:
- Load Cell Transducer TI82-1K-10P1 sold AS-IS for parts or repair. Not tested; no functionality guaranteed. Body and cable included; connector shows age/wear. Please contact us with any questions.
$125.00Was: $250.00 -
HP Hewlett Packard 11353A Diagnostic Fixture Gold Pin Array Short 0.05V 10V 1kΩ
Hewlett Packard
$1,400.00Was: $5,000.00HP Hewlett Packard 11353A Diagnostic Fixture Gold Pin Array Short 0.05V 10V 1kΩThe Hewlett Packard 11353A is a diagnostic fixture designed for use with HP logic analyzers and automated test equipment (ATE) systems. It provides a dense gold pin array that...46424- SKU:
- 46424
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Hewlett-Packard
- Model:
- 11353A
- MPN:
- 11353A
- SKU:
- 46424
- Type:
- Diagnostic Fixture
- Condition:
- Used – Inspected
- Pin Type:
- Gold
- Calibration Modes:
- Short, 0.05V, 10V, 1kΩ
- Controls:
- 4 pushbutton selectors: SHORT, 0.05V, 10V, 1kΩ
- Form Factor:
- Benchtop / Portable
- Country/Region of Manufacture:
- United States
- Application:
- Logic Analyzer / Automated Test Equipment (ATE)
- Provenance:
- US Navy surplus
- Seller Notes:
- Includes diagnostic fixture with gold pin array and carrying handle. No accessories.
- Condition Notes:
- HP 11353A Diagnostic Fixture inspected and in good used condition. Aluminum enclosure shows light wear. Gold pin array intact. All 4 pushbutton controls (SHORT, 0.05V, 10V, 1kΩ) present. US Navy surplus.
$1,400.00Was: $5,000.00 -
HP Hewlett Packard 11453B 11353A Diagnostic Fixture Gold Pins Test Board
Hewlett Packard
$1,400.00Was: $5,000.00HP Hewlett Packard 11453B 11353A Diagnostic Fixture Gold Pins Test BoardDiagnostic test fixture designed for in-circuit board testing and logic analyzer diagnostics. Features a dual-section gold pin matrix array with four front-panel calibration controls...46423- SKU:
- 46423
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Hewlett-Packard
- Model:
- 11453B
- Secondary Model:
- 11353A
- MPN:
- 11453B
- Type:
- Diagnostic Test Fixture
- SKU:
- 46423
- Condition:
- Used – Inspected
- Contact Type:
- Gold Pins
- Pin Configuration:
- Dual-section gold pin matrix array
- Calibration Controls:
- SHORT, 0.5V, 10V, 1kΩ — four front-panel knobs
- Enclosure:
- Aluminum, clamshell/hinged lid with carry handle
- Latch Type:
- Two rotating cam-lock knobs on front edge
- Form Factor:
- Benchtop / Portable
- Application:
- In-circuit board test, logic analyzer diagnostics
- Compatible With:
- HP logic analyzers and in-circuit test systems
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes fixture with gold pin matrix; no additional accessories observed
- Condition Notes:
- This HP 11453B / 11353A Diagnostic Fixture has been inspected and is in good used condition. Outer aluminum enclosure shows light scuffing and age wear. Gold pin matrix appears intact. Four calibration knobs present.
$1,400.00Was: $5,000.00 -
TBLO Calibration Load Panel F817182-1 Rackmount OFR-Sync Load Select
TBLO
$100.00Was: $200.00TBLO Calibration Load Panel F817182-1 Rackmount OFR-Sync Load SelectRackmount calibration load panel used in telecom and industrial test environments. Provides load selection and pulse output control with front-panel status indicators and D-sub...36371- SKU:
- 36371
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- TBLO
- MPN:
- F817182-1
- Type:
- Calibration Load Panel
- SKU:
- 36371
- Assembly Number:
- F817182-1
- Form Factor:
- Rackmount
- Front Panel Sections:
- SEL Status, OFR-Sync, Load Select, Pulse Sel.
- Connectors:
- J44 (DB9), J7 (DB15), J45 (DB15) D-sub connectors
- Controls:
- Rotary Load Select switch; PRI/RED toggle switch
- Indicators:
- Color-coded banana jack terminals: A, B, A', B', GND
- Pulse Outputs:
- Pulse A and Pulse B with A/B/GND banana jacks
- Condition:
- Used – Inspected
- Seller Notes:
- Panel only; wiring harness and rear sub-assembly included as shown.
- Condition Notes:
- TBLO F817182-1 Calibration Load Panel inspected and in good used condition. Front panel clean, rear wiring harness intact, rear sub-assembly present. Light wear from prior use. Photos available.
$100.00Was: $200.00 -
Custom Calibration Fixture Industrial Automation XY Stage Probe Holder Benchtop
Custom
$125.00Was: $250.00Custom Calibration Fixture Industrial Automation XY Stage Probe Holder BenchtopCustom-built calibration fixture designed for precision probe positioning and alignment in industrial automation systems. Features a benchtop XY adjustment stage with...31217- SKU:
- 31217
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Unbranded
- Model:
- Custom Calibration Fixture
- Type:
- Calibration Fixture / Probe Holder
- SKU:
- 31217
- Condition:
- Used – Inspected
- Form Factor:
- Benchtop
- Base Material:
- Anodized Aluminum / Black
- Stage Type:
- XY Adjustment Stage
- Actuator:
- Brass Knurled Knob
- Probe Holder:
- Spring-Loaded Probe/Pin Holder
- Cable / Connector:
- Braided Wire w/ Blue 2-Pin Connector
- Mounting:
- Flat Base Plate with Rubber Feet
- Application:
- Industrial Automation Calibration / Probing
- Seller Notes:
- Includes braided cable harness with blue 2-pin connector. No brand markings visible.
- Condition Notes:
- This custom calibration fixture with XY stage and probe holder has been inspected and is in good used condition. Body shows light wear. Brass knob, probe holder, springs, and braided wire harness appear intact. No brand markings visible.
$125.00Was: $250.00 -
Analogic Measurometer II Pneumatic Precision Measurement System w/ Analog
Unbranded
$325.00Was: $650.00Analogic Measurometer II Pneumatic Precision Measurement System w/ Analog Controller Benchtop pneumatic measurement system designed for precision dimensional gauging. Features analog controller with LED digital readout and pneumatic actuator stage for...26756- SKU:
- 26756
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- Analogic
- Model:
- Measurometer II
- MPN:
- Measurometer II
- Type:
- Pneumatic Precision Measurement System
- SKU:
- 26756
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes analog controller, pneumatic actuator stage, air regulator/filter, yellow air tubing, and multi-pin sensor cable
- Form Factor:
- Benchtop
- Display Type:
- LED Digital Readout
- Controller Type:
- Analog – Measurometer II
- Actuator Type:
- Pneumatic
- Front Panel Controls:
- ZERO adjust dial, CAL adjust dial, power switch, indicator LED
- Connector Type:
- Multi-pin circular connector (sensor cable)
- Air Supply:
- Pneumatic – includes in-line air regulator and filter
- Application:
- Precision dimensional gauging and measurement
- Included Accessories:
- Pneumatic actuator stage, air regulator/filter, yellow air tubing, multi-pin sensor cable
- Condition Notes:
- This Analogic Measurometer II pneumatic measurement system has been inspected and is in good condition. Pulled from a working environment. Includes controller, actuator stage, air regulator, tubing, and sensor cable. Please contact us with questions.
$325.00Was: $650.00 -
Scherr-Tumico 62-6381-00 Precision Dial Dynamometer 100-500g 5N Force Gauge
Scherr-Tumico
$90.00Was: $175.00Scherr-Tumico 62-6381-00 Precision Dial Dynamometer 100-500g 5N Force GaugeAnalog dial force gauge designed to measure tension and compression forces in the 100–500 gram (5 Newton) range. Handheld or benchtop instrument used for direct force measurement...26725- SKU:
- 26725
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Scherr-Tumico
- Model:
- 62-6381-00
- MPN:
- 62-6381-00
- Type:
- Precision Dial Dynamometer / Force Gauge
- SKU:
- 26725
- Measurement Range:
- 100–500 g / 5 N
- Scale Units:
- Grammes (g)
- Dial Face Width:
- 2.5 inches
- Measurement Type:
- Force / Tension
- Display Type:
- Analog Dial
- Country/Region of Manufacture:
- France
- Era / Decade:
- 1970s
- Condition:
- Used – Inspected and Tested
- Includes:
- Original storage/display case
- Seller Notes:
- Tested with 200g and 500g calibration weights; original case included, shows wear
- Form Factor:
- Handheld / Benchtop
- Application:
- Force measurement, calibration, metrology, QC testing
- Condition Notes:
- Scherr-Tumico 62-6381-00 dial dynamometer inspected and in working condition. Tested with 200g and 500g calibration weights. 1970s vintage; original case included, shows wear. Please contact us with questions.
$90.00Was: $175.00 -
Brylen Technologies 44561 2 Inch Microline Calibration Inspection Block
Brylen Technologies
$55.00Was: $100.00Brylen Technologies 44561 2 Inch Microline Calibration Inspection BlockSteel calibration block manufactured by Brylen Technologies for dimensional calibration and inspection work. The 2-inch Microline block is a reference standard used to verify...26370- SKU:
- 26370
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Brylen Technologies
- Model:
- 44561
- MPN:
- 044561
- Type:
- Calibration / Inspection Block
- SKU:
- 26370
- Size:
- 2 Inch
- Series:
- Microline
- Material:
- Steel
- Application:
- Dimensional Calibration and Inspection
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Calibration block only; no additional accessories included.
- Condition Notes:
- Brylen Technologies 44561 Microline calibration block pulled from a working environment. Inspected and in good used condition with minor surface wear. Calibration label dated 7-13-93; recalibration recommended before traceable use.
$55.00Was: $100.00