Description
Matsui MCM-151 Injection Molder Mold Temperature Controller 460V 3Ph 60Hz
Mold temperature controller for plastic injection molding machines. Maintains consistent mold temperatures during production cycles via circulating heated coolant through mold cavities.
Specifications & What's Included
- Brand: Matsui | Model: MCM-151
- Power: AC 460V, 3-Phase, 60Hz
- Motor: 0.5kW (1.4A) | Heater: 2.0kW (2.5A)
- Pump: Speck Pumpen NPY-2251-0034/VA assembly included
- Form Factor: Freestanding/Cart-Mounted
- Country of Manufacture: Japan
Applications
Mold temperature controllers regulate coolant flow and temperature in plastic injection molding systems. They connect to mold cavity networks and maintain optimal processing temperatures for resin cure and part dimensional stability. These units are used across small to mid-sized injection molding operations and are compatible with standard molding machine designs requiring external temperature management.
Condition: For Parts or Not Working
This Matsui MCM-151 Mold Temperature Controller is being sold AS-IS for parts or repair. It was pulled from a larger injection molding system and has not been tested — no functionality is guaranteed. The enclosure shows significant cosmetic wear: heavy rust and paint loss cover much of the top and side panels, with additional rust and corrosion visible on the interior floor and around internal components. The front panel controls and digital displays appear physically intact. The Speck Pumpen pump assembly and internal manifold/valve components are present and visible. A heavy-gauge power cable is attached. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This Matsui MCM-151 Mold Temperature Controller is being sold AS-IS for parts or repair. It was pulled from a larger injection molding system and has not been tested — no functionality is guaranteed. The enclosure shows significant cosmetic wear: heavy rust and paint loss cover much of the top and side panels, with additional rust and corrosion visible on the interior floor and around internal components. The front panel controls and digital displays appear physically intact. The Speck Pumpen pump assembly and internal manifold/valve components are present and visible. A heavy-gauge power cable is attached. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Matsui |
Model: |
MCM-151 |
MPN: |
MCM-151 |
Type: |
Mold Temperature Controller |
SKU: |
47099 |
Condition: |
As-Is / For Parts or Not Working |
Seller Notes: |
Sold AS-IS for parts or repair. Untested. Speck Pumpen pump assembly included. |
Country/Region of Manufacture: |
Japan |
Form Factor: |
Freestanding / Cart-Mounted |
Power Requirements: |
AC 460V, 3-Phase, 60Hz |
Voltage Rating: |
460V AC |
Phase: |
Three Phase |
Frequency: |
60Hz |
Motor Power: |
0.5kW (1.4A) |
Heater Power: |
2.0kW (2.5A) |
Pump Model: |
Speck Pumpen NPY-2251-0034/VA |
Application: |
Plastic Injection Molding |
Compatible With: |
Plastic injection molding machines requiring mold temp control |
Condition Notes: |
Matsui MCM-151 Mold Temperature Controller sold AS-IS for parts or repair. Pulled from a larger system; untested, no functionality guaranteed. Heavy rust and paint loss on exterior and interior. Speck Pumpen pump assembly present. |
