Description
Netstal PIA 110.240.6181a System Interface Board Injection Molder I/O Card
System interface and I/O control board for Netstal injection molding machines. Routes parallel input/output signals between the machine's control system and peripheral equipment.
Specifications & What's Included
- Brand: Netstal
- Model: PIA 110.240.6181a / Secondary Model PIA 110.240.6182a
- Type: System Interface / I/O Board
- Form Factor: PCB Card / Module with DIN 41612 multi-pin edge connector
- I/O Configuration: 40 parallel I/O pins (numbered 1–40)
- Manufactured in Switzerland
Applications
This board functions as the control interface in Netstal injection molding systems, managing communication between the main controller and auxiliary systems. It handles machine status signals, sensor inputs, and equipment activation outputs. Commonly used in production environments running Netstal injection presses, where reliable I/O routing is required for consistent mold operation and peripheral device control.
Condition: Used
This Netstal PIA 110.240.6181a system interface board has been inspected and is in good used condition. It was pulled from a working Netstal injection molding machine where it was actively in use. The PCB shows normal wear consistent with service use. Gold-plated edge connector pins and the I/O pin header array appear intact with no visible damage. The board is free of obvious physical defects, broken traces, or burnt components. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This Netstal PIA 110.240.6181a system interface board has been inspected and is in good used condition. It was pulled from a working Netstal injection molding machine where it was actively in use. The PCB shows normal wear consistent with service use. Gold-plated edge connector pins and the I/O pin header array appear intact with no visible damage. The board is free of obvious physical defects, broken traces, or burnt components. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
Netstal |
Model: |
PIA 110.240.6181a |
MPN: |
110.240.6181a |
Secondary Model: |
PIA 110.240.6182a |
Type: |
System Interface / I/O Board |
SKU: |
46063 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Board only; pulled from a Netstal injection molding machine |
Country/Region of Manufacture: |
Switzerland |
Form Factor: |
Card / Module / PCB |
Compatible With: |
Netstal Injection Molding Machines |
Application: |
Injection Molding Machine Control / I/O Interface |
Connector Type: |
DIN 41612 / Multi-pin edge connector |
Number of I/O Pins: |
40 (numbered 1–40 visible on PCB) |
Interface: |
Parallel I/O pin header array |
Condition Notes: |
Netstal PIA 110.240.6181a system interface board. Inspected, good used condition. Pulled from a working Netstal injection molding machine. PCB and connectors appear intact with no visible damage. |
