Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Varian VJW1454R1 Remote Channel Selector front panel with dual red LED displays and power indicator Varian VJW1454R1 Remote Channel Selector rear view showing IEC power inlet and two DB25 connectors

    Varian VJW1454R1 Remote Channel Selector 115VAC 100VA P/N 01014548-00/A

    Varian

    $120.00
    Was: $250.00
    Varian VJW1454R1 Remote Channel Selector 115VAC 100VA P/N 01014548-00/AThe Varian VJW1454R1 is a rackmount Remote Channel Selector made by Varian Microwave Equipment Products. It is designed to...
    35910
    SKU:
    35910
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    14.00 LBS
    Brand:
    Varian
    Model:
    VJW1454R1
    MPN:
    01014548-00/A
    Type:
    Remote Channel Selector
    SKU:
    35910
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair. One front-panel button is missing.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rackmount
    Power Requirements:
    115 VAC, 100 VA
    Power Connector:
    IEC C14 (J1)
    Interface / Connectors:
    DB25 (J2), DB25 black (J3)
    Display Type:
    Dual 7-segment red LED (CHANNEL, SELECT)
    Front Panel Controls:
    UP, DOWN, SEL, LAMP TEST, CONT MODE buttons
    Front Panel Indicators:
    PWR, FAIL, CABLE, BLOC, REM, AUX LEDs
    Application:
    Satellite / microwave communication channel selection
    Compatible With:
    Varian microwave equipment products systems
    Condition Notes:
    Varian VJW1454R1 Remote Channel Selector sold as-is for parts or repair. One front-panel button is missing. Unit has not been tested and no functionality is guaranteed. Normal cosmetic wear. Please view photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $120.00
    Was: $250.00
  • Tektronix DAS 9109 Digital Analysis System mainframe front view with detached keyboard and blue handle tag Tektronix DAS 9109 rear panel showing module slots, exhaust fan, power inlet, and trigger input BNC connector

    Tektronix DAS 9109 Digital Analysis System Mainframe Logic Analyzer For Parts

    Tektronix

    $200.00
    Was: $400.00
    Tektronix DAS 9109 Digital Analysis System Mainframe Logic Analyzer For PartsThe DAS 9109 is a benchtop logic analyzer and digital analysis system mainframe from Tektronix. It functions as a modular...
    36007
    SKU:
    36007
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    58.00 LBS
    Brand:
    Tektronix
    Model:
    DAS 9109
    MPN:
    DAS 9109
    Type:
    Digital Analysis System Mainframe
    SKU:
    36007
    Series:
    DAS 9100
    Firmware Version:
    V 1.07
    Option:
    01 NSN
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes detachable DAS 9100 Series keyboard. Does not power on.
    Display Type:
    9-inch Raster Scan CRT, 24 x 80 character lines
    Form Factor:
    Benchtop / Portable
    Measurement Type:
    Logic Analysis, Pattern Generation
    System Architecture:
    Modular — accepts plug-in modules
    Trigger Input:
    5V Max (BNC)
    Module Slots:
    Multiple — slots visible on rear panel
    Country/Region of Manufacture:
    United States
    Compatible With:
    Tektronix DAS 9100 Series plug-in modules
    Condition Notes:
    Tektronix DAS 9109 Digital Analysis System does not power on. Sold as-is for parts or repair only — no functionality guaranteed. Includes detachable keyboard. Module slots are empty.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Varian VJW6767D8 Remote Control Unit front panel — dual PA sections with indicator buttons and analog output power meters, RCA label visible upper right Varian VJW6767D8 front panel close-up — PA1 and PA2 sections with labeled indicator/alarm buttons, analog meters, Auto/Manual and PA On/Line selector switches

    Varian VJW6767D8 Remote Control Unit Satellite Station PA Monitor RCA

    Varian

    $125.00
    Was: $250.00
    Varian VJW6767D8 Remote Control Unit Satellite Station PA Monitor RCAThe Varian VJW6767D8 is a rackmount Remote Control Unit built by Varian's Microwave Equipment Division in Santa Clara, California...
    36027
    SKU:
    36027
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    12.00 LBS
    Brand:
    Varian
    Model:
    VJW6767D8
    MPN:
    VJW6767D8
    Secondary Model:
    112780-00
    SKU:
    36027
    Type:
    Remote Control Unit
    Application:
    Satellite Station Power Amplifier Monitoring
    PA Sections:
    Dual (PA 1 and PA 2)
    Form Factor:
    Rackmount
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Unit only — sold AS-IS for parts or repair
    Country/Region of Manufacture:
    United States
    Manufacturer Division:
    Varian Microwave Equipment Division, Santa Clara CA
    Condition Notes:
    Varian VJW6767D8 Remote Control Unit sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Cosmetically intact with rear wiring harness present. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • LNR DC4-D1 Down Converter 4U rackmount chassis front panel showing two DC4-D1 down converter modules and center CONTROL section with mode select, alarm indicators, and BNC connectors LNR DC4-D1 Down Converter 4U aluminum rackmount chassis rear/top view showing ventilation mesh, cooling fans, and power cabling

    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For Parts

    LNR

    $175.00
    Was: $350.00
    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For PartsSatellite L-band down converter system in 4U rackmount chassis. Converts RF signals to intermediate frequency for...
    36047
    SKU:
    36047
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    LNR Communications
    Model:
    DC4-D1
    MPN:
    DC4-D1
    Secondary Model:
    SM7-219-1
    Type:
    Satellite Down Converter with Coax Switch
    SKU:
    36047
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 2x DC4-D1 down converters, 1x 51029-004112 assembly, 1x 004002-2 4U aluminum chassis, 1x SMI SM7-219-1 coax switch
    Form Factor:
    4U Rackmount
    Chassis Part Number:
    004002-2
    Assembly Part Number:
    51029-004112
    Coax Switch Model:
    SMI SM7-219-1
    Coax Switch Type:
    Baseball-style coax switch
    Dimensions:
    24" x 19" x 7" (4U)
    Rack Size:
    19-inch, 4U
    Country/Region of Manufacture:
    United States
    Application:
    Satellite communications (SATCOM), L-band signal downconversion
    Interface / Connectors:
    BNC, SMA, DB25, DB9 (visible on rear panel)
    Alarm Outputs:
    Summary, RF LO, IF LO, +24 VDC alarm indicators
    Monitor Functions:
    RF LO, IF LO, +24 VDC monitor points
    LO Select:
    INT / AUX switchable
    Control Panel:
    Dedicated CONTROL module with Mode Select and Output Select
    Power Status:
    Does not power on — sold for parts or repair
    Condition Notes:
    LNR DC4-D1 Down Converter does not power on. Sold as-is for parts or repair — no functionality guarantee. Chassis and modules show normal service wear; connectors appear intact. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Ericsson Thermistor Bridge Type 4 – three-quarter front-left view showing gray metal enclosure, two analog panel meters, and front knobs Ericsson Thermistor Bridge Type 4 – front-left angle view showing milliammeter and microammeter dials, control knobs, and side ventilation slots

    Ericsson Thermistor Bridge Type 4 Milliammeter Wheatstone Lab Test Instrument

    Tillhor

    $150.00
    Was: $300.00
    Ericsson Thermistor Bridge Type 4 Milliammeter Wheatstone Lab Test InstrumentThe Ericsson Thermistor Bridge Type 4 is a vintage benchtop bridge measurement instrument manufactured by Telefon A.B. L.M...
    36127
    SKU:
    36127
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    36.00 LBS
    Brand:
    LM Ericsson
    Model:
    Type 4
    MPN:
    Type 4
    Type:
    Thermistor Bridge
    SKU:
    36127
    Inventory Number:
    YE600
    Department:
    K
    Seller Notes:
    Sold as-is for parts or repair. Includes the main instrument unit only.
    Country/Region of Manufacture:
    Sweden
    Form Factor:
    Benchtop
    Condition:
    As-Is / For Parts or Not Working
    Measurement Type:
    Thermistor Bridge / Resistance Balance
    Meter 1:
    Milliamperes (Sensitive Research brand meter)
    Meter 2:
    Microamperes (analog panel meter)
    Front Panel Controls:
    Coarse Balance, Fine Balance, Modulator Control, Main Switch, Balance Amplifier
    Front Panel Inputs:
    Thermistor, Socket, External Detector, Main Switch toggle
    Power Input Options:
    AVI 30V; A052 240V; A052 200V (fuse/voltage selector on rear)
    Rear Connectors:
    3-pin round power connector, fuse holder, toggle switch
    Power Supply Type:
    Multi-voltage selector (30V / 200V / 240V)
    Era / Vintage:
    Mid-20th century (est. 1940s–1960s)
    Ownership Plate:
    Tillhor Telefon A.B. L.M. Ericsson, Avd. K, Inv. Nr. YE600
    Condition Notes:
    Ericsson Thermistor Bridge Type 4 sold as-is for parts or repair. Not tested; no functionality guaranteed. Enclosure shows chipping, scratches, and rust on rear panel. Meters and knobs present. Ownership plate intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • General Radio Variac Type 10B TFX-5297 test board front panel — blue panel with dual Variac knobs, fault indicators, and labeled test sections General Radio Variac TFX-5297 enclosure rear view — gray metal cabinet showing ventilation slots, open bottom bay with transformer visible

    General Radio Variac Type 10B M2 Variable Transformer Test Board TFX-5297

    Powerstat

    $198.00
    Was: $400.00
    General Radio Variac Type 10B M2 Variable Transformer Test Board TFX-5297Variable autotransformer test fixture designed for bench-level power distribution and circuit testing. Provides 0–132V AC...
    36423
    SKU:
    36423
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    28.00 LBS
    Brand:
    General Radio
    Model:
    Type 10B
    Secondary Model:
    Type M2
    MPN:
    TFX-5297
    SKU:
    36423
    Type:
    Variable Autotransformer (Variac) in Test Enclosure
    Output Voltage:
    0–132V AC (variable)
    Input Voltage:
    120V AC
    Phase:
    Single Phase
    Variac Series:
    Powerstat / Variac Type M2
    Enclosure / Assembly:
    TFX-5297 Board-Level Test Fixture
    Front Panel Features:
    AC Input Vari-Set knob, Phase-Select (A/B/C/None), AC Meter, Metering switch (Vari/Fixed)
    Additional Controls:
    Current XFMR Vari-Set knob, PWM SD, Contactor, Gen Warn, OV1/OV2/UV Fault indicators
    Test Points:
    SIG GEN IN, GRD, 12VDC N, Neutral, A, B, C banana jacks; PWM OUT, POS 26V IN
    Connector Included:
    Burdy UPC2B25P-4 / M55302/4-03 connector (M8833)
    Calibration:
    Labeled CALIBRATION NOT REQUIRED
    Labels:
    FINAL TEST / BOARD LEVEL panel labels
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Freestanding Enclosure
    Seller Notes:
    Includes wiring harness and Burny connector; sold as pictured with all visible hardware
    Condition Notes:
    General Radio Variac Type 10B (M2) in TFX-5297 test enclosure. Inspected, pulled from a working environment where it was in active use. Shows surface wear and paint chips on enclosure. Panel components appear complete.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $198.00
    Was: $400.00
  • RG-142 B/U RF coaxial cable OSM26805 full length view showing white PTFE braided jacket and SMA male connectors with yellow identification band Close-up of RG-142 B/U marking printed on white braided PTFE cable jacket

    RG-142 B/U SMA Male RF Coax Cable OSM26805 46 Inch 50 Ohm Microwave Test

    RF

    $15.00
    Was: $30.00
    RG-142 B/U SMA Male RF Coax Cable OSM26805 46 Inch 50 Ohm Microwave TestRG-142 B/U coaxial cable with SMA male connectors on both ends. 50 ohm impedance rated for RF and microwave applications. Part...
    36979
    SKU:
    36979
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    OSM26805
    MPN:
    OSM26805
    Type:
    RF Coaxial Cable
    SKU:
    36979
    Cable Type:
    RG-142 B/U
    Connector Type:
    SMA Male
    Impedance:
    50 Ohm
    Cable Length:
    46 Inches
    Jacket Material:
    PTFE (White Braided)
    Application:
    Microwave, RF Test, Signal Interconnect
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. SMA male connectors on both ends. Part number OSM26805 marked on cable.
    Condition Notes:
    RG-142 B/U SMA RF cable OSM26805 sold as-is for parts, no functionality guarantee. Not tested. SMA connectors show oxidation/tarnishing. PTFE jacket appears intact. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00
  • RF Cable 200087-003 REV-5 full view – 9-inch braided coaxial jumper with gold-body connector on one end and SMA connector on the other RF Cable 200087-003 – close-up of gold anodized aluminum hex body connector with orange O-ring and white PTFE center pin insulator

    RF Cable 200087-003 REV-5 9 Inch SMA Male to Gold Pin Coaxial Jumper AS-IS

    RF

    $20.00
    Was: $40.00
    RF Cable 200087-003 REV-5 9 Inch SMA Male to Gold Pin Coaxial Jumper AS-ISThis is a 9-inch semi-rigid braided coaxial RF cable assembly, part number 200087-003 REV-5. One end terminates in a...
    36980
    SKU:
    36980
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    200087-003
    MPN:
    200087-003
    Revision:
    REV-5
    Type:
    RF Coaxial Cable Assembly
    SKU:
    36980
    Cable Length:
    9 inches (approx. 229 mm)
    Connector 1 Type:
    SMA Male
    Connector 2 Type:
    Gold-Body Center-Pin RF Connector
    Cable Construction:
    Semi-rigid / braided coaxial
    Cable Jacket:
    Silver braided outer shield
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair. No functionality guaranteed.
    Condition Notes:
    RF Cable 200087-003 REV-5, 9-inch coaxial jumper sold AS-IS for parts or repair. Not tested; no functionality guaranteed. Visually intact per photos. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • KMW 140223-2 Rev 2 RF coaxial cable assembly full view — braided stainless jacket, SMA male connector at right, gold panel-mount male connector at left KMW 140223-2 close-up of gold-plated panel-mount male RF connector end with white PTFE dielectric and center pin

    KMW 140223-2 Rev 2 RF Coaxial Cable 7in SMA Male Braided Microwave Assembly

    KMW

    $20.00
    Was: $40.00
    KMW 140223-2 Rev 2 RF Coaxial Cable 7in SMA Male Braided Microwave AssemblyThe KMW 140223-2 Rev 2 is a short flexible RF coaxial cable assembly measuring approximately 7 inches in length. It features...
    36981
    SKU:
    36981
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    KMW
    Model:
    140223-2
    MPN:
    140223-2
    Secondary Model:
    Rev 2
    SKU:
    36981
    Type:
    RF Coaxial Cable Assembly
    Connector 1:
    Panel-Mount Male (gold-plated, center pin)
    Connector 2:
    SMA Male
    Cable Length:
    7 inches (approx. 178 mm)
    Cable Jacket:
    Braided stainless steel flexible outer jacket
    Application:
    Microwave / RF Interconnect
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Sold as a single RF cable assembly, no accessories included.
    Condition Notes:
    New/unused, open box. 7in SMA male RF coaxial cable. Braided jacket intact, connectors show no wear. Original packaging opened or missing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Light Grid Assembly C15186-1 — front view showing fluorescent lamp tubes in aluminum frame with red and green wire leads Light Grid Assembly C15186-1 — close-up of lamp tubes and foil-wrapped component showing dust and wear

    Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring

    Light Grid Assembly

    $35.00
    Was: $70.00
    Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring Fluorescent lamp grid assembly with aluminum frame and integrated wiring. Contains lamp tubes mounted in a rectangular array...
    36982
    SKU:
    36982
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Unbranded
    Model:
    C15186-1
    MPN:
    C15186-1
    Type:
    Fluorescent Lamp Grid Assembly
    SKU:
    36982
    FSCM:
    02145
    Date Code:
    5/81
    Quantity:
    1 EA
    Condition:
    As-Is / For Parts or Not Working
    Frame Material:
    Aluminum
    Wiring:
    Red and green wire leads included
    Seller Notes:
    Sold AS-IS for parts. Includes lamp tubes and wiring leads in aluminum frame.
    Condition Notes:
    Light Grid Assembly C15186-1 sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Dust and soiling visible on lamp tubes. Aluminum frame intact; wiring leads present. Please review photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Transistor Devices Inc SPS 1676 switching power supply – three-quarter front view showing open frame chassis, top-mounted TO-3 transistors, transformer, and hardwired AC cord Transistor Devices Inc SPS 1676 switching power supply – opposite three-quarter view showing PCB with capacitors, resistors, and wiring harness with red and black output leads

    Transistor Devices Inc SPS 1676 Switching Power Supply For Parts TDI

    Transistor Devices inc.

    $60.00
    Was: $125.00
    Transistor Devices Inc SPS 1676 Switching Power Supply For Parts As-Is TDIOpen-frame DC switching power supply manufactured by Transistor Devices Inc. Features hardwired AC input, regulated DC...
    37016
    SKU:
    37016
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    7.00 LBS
    Brand:
    Transistor Devices Inc
    Model:
    SPS 1676
    MPN:
    SPS 1676
    Type:
    Switching Power Supply
    SKU:
    37016
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair; no functionality guarantee
    Country/Region of Manufacture:
    United States
    Form Factor:
    Open Frame / Benchtop
    Output Type:
    DC (regulated switching)
    AC Input Connection:
    Hardwired AC power cord
    Notable Components:
    Power transformer, TO-3 output transistors, PCB assembly
    Condition Notes:
    Used open-frame switching power supply. Shows age-appropriate wear. All major components present: TO-3 transistors, transformer, PCB, AC cord intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • UNI-9901PSV1 Universal Input Power Supply – top-front view showing vented metal chassis, green label, and output pigtail wire UNI-9901PSV1 Universal Input Power Supply – angled side view showing vented chassis and output wire with 2-pin connector

    UNI-9901PSV1 Universal Input Power Supply 5VDC 13A 100-240VAC Open Frame

    Universal Input Power Supply

    $20.00
    Was: $40.00
    UNI-9901PSV1 Universal Input Power Supply 5VDC 13A 100-240VAC Open FrameOpen-frame switching power supply converts 100-240VAC input to regulated +5VDC output at up to 13A (65W). Standard industrial...
    37084
    SKU:
    37084
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    UNI-9901PSV1
    MPN:
    UNI-9901PSV1
    Type:
    Universal Input Open Frame Power Supply
    SKU:
    37084
    Output Voltage:
    +5 VDC
    Max Output Current:
    13A
    Input Voltage:
    100-240VAC
    Output Power:
    65W (5V x 13A)
    Form Factor:
    Open Frame / Enclosed Chassis
    Input Connector:
    IEC C14 (standard 3-pin power inlet)
    Output Connector:
    Pigtail wire leads with 2-pin connector
    Power Switch:
    Rear-mounted rocker on/off switch
    Manufacture Date:
    08/01
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair; no functionality guarantee
    Condition Notes:
    UNI-9901PSV1 Universal Input Power Supply sold as-is for parts or repair. Not tested; no functionality guarantee. Unit is physically intact with light wear. IEC C14 inlet and rocker switch present. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Catalyst Systems SMTC1310/1550-1x8 fiber optic coupler chassis — top and front view showing 1U rackmount form factor with rack ears Catalyst Systems fiber optic coupler — angled front view showing row of 8 green SC/APC coupler ports along the front panel

    Catalyst Systems SMTC1310/1550-1x8 SC/APC Fiber Optic Coupler 1U Rackmount

    Catalyst Systems

    $55.00
    Was: $100.00
    Catalyst Systems SMTC1310/1550-1x8 SC/APC Fiber Optic Coupler 1U RackmountThis is a Catalyst Systems SMTC1310/1550-1x8 passive fiber optic coupler chassis — a 1x8 single-mode splitter/coupler module...
    37086
    SKU:
    37086
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Catalyst
    Model:
    SMTC1310/1550-1x8
    MPN:
    SMTC1310/1550-1*8
    Type:
    Fiber Optic Coupler / Splitter Chassis
    SKU:
    37086
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is; includes 1U rack chassis with 8 SC/APC coupler ports installed
    Form Factor:
    1U Rackmount
    Connector Type:
    SC/APC
    Number of Ports:
    8
    Wavelength:
    1310nm / 1550nm
    Split Ratio:
    1x8
    Fiber Type:
    Single-Mode (SM)
    Product Type Label:
    Chassis Coupler (SC/APC)
    Compatible With:
    Standard 19-inch telecom / network racks
    Country/Region of Manufacture:
    China
    Condition Notes:
    Catalyst Systems SMTC1310/1550-1x8 SC/APC Coupler 1U Rackmount, used. Chassis and ports intact, light wear. Not tested for optical performance.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • CDE KTSM37U506M3E 50uF 370VAC oval run capacitor – side view showing label with ratings and CDE logo CDE KTSM37U506M3E run capacitor – top view showing dual quick-connect blade terminal clusters in black housing

    CDE KTSM37U506M3E 50uF 370VAC 60Hz Run Capacitor 005-1685-MF C10000 AFC

    CDE

    $8.00
    Was: $15.00
    CDE KTSM37U506M3E 50uF 370VAC 60Hz Run Capacitor 005-1685-MF C10000 AFCCornell Dubilier motor run capacitor rated for 50 µF at 370 VAC, 60 Hz operation. Run capacitors are used to maintain consistent...
    37128
    SKU:
    37128
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cornell Dubilier (CDE)
    Model:
    KTSM37U506M3E
    MPN:
    KTSM37U506M3E
    Secondary Model:
    005-1685-MF
    Type:
    Motor Run Capacitor
    Capacitance:
    50 µF
    Voltage Rating:
    370 VAC
    Frequency:
    60 Hz
    Temperature Rating:
    70°C
    Part Number 2:
    C10000 AFC
    Date Code / Lot:
    0114
    Country/Region of Manufacture:
    United States
    Form Factor:
    Oval / Oval Can
    Terminal Type:
    Quick-connect blade terminals
    Certifications:
    UL, CE, RoHS (PROTECTED-NO PCBs)
    SKU:
    37128
    Condition:
    Used – Inspected
    Seller Notes:
    Sold as single unit. Used surplus, inspected.
    Condition Notes:
    This CDE KTSM37U506M3E 50uF 370VAC run capacitor has been inspected and is in good used condition. Can is intact, terminals clean, label legible. Normal light surface wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $8.00
    Was: $15.00
  • Aerovox Z62P4840M23 40uF 480V motor run capacitor — oval aluminum can body, side label view showing ratings Aerovox Z62P4840M23 capacitor — close-up of dual ceramic terminal posts with blade tabs on top

    Aerovox Z62P4840M23 Run Capacitor 40uF 480V 50/60Hz 70C GE 004959

    GE

    $25.00
    Was: $50.00
    Aerovox Z62P4840M23 Run Capacitor 40uF 480V 50/60Hz 70C GE 004959Motor run capacitor from the Aerovox SUPERMET series. Used in three-phase industrial motors and compressors to improve power factor...
    37130
    SKU:
    37130
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Aerovox
    Model:
    Z62P4840M23
    MPN:
    Z62P4840M23
    Secondary Model:
    004959
    Type:
    Motor Run Capacitor
    SKU:
    37130
    Capacitance:
    40uF (40 Microfarad)
    Voltage Rating:
    480V
    Frequency:
    50/60Hz
    Temperature Rating:
    70°C
    Series:
    SUPERMET
    Protection:
    Protected D
    Interrupting Capacity:
    10000 AFC
    Date Code:
    SH9808 1238
    PCB Content:
    No PCBs
    Country/Region of Manufacture:
    United States
    Mounting Style:
    Oval Can with Dual Blade Terminal Posts
    Condition:
    Used – Inspected
    Seller Notes:
    Used surplus capacitor, label intact and legible. No accessories included.
    Condition Notes:
    This Aerovox Z62P4840M23 40uF 480V run capacitor (GE 004959) is used surplus, inspected, label intact. Shows light oxidation and age wear. Not electrically tested. Both terminal posts undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • Power-One F24-12 DC Power Supply – front and side view showing heatsink fins and label Power-One F24-12 – interior bottom view showing transformer, Sprague filter capacitors, and control PCB

    Power-One F24-12 DC Power Supply 24VDC 12A 28VDC 10A 115/230VAC For Parts

    Power One

    $45.00
    Was: $90.00
    Power-One F24-12 DC Power Supply 24VDC 12A 28VDC 10A 115/230VAC For PartsThe Power-One F24-12 is a linear DC power supply manufactured by Power-One of Camarillo, California. It is a...
    37188
    SKU:
    37188
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    17.00 LBS
    Brand:
    Power-One
    Model:
    F24-12
    MPN:
    F24-12
    Type:
    Linear DC Power Supply
    SKU:
    37188
    Condition:
    As-Is / For Parts or Not Working
    Input Voltage:
    115/230 VAC
    Input Frequency:
    47–440 Hz
    Output Voltage:
    24 VDC or 28 VDC (jumper selectable)
    Output Current:
    12A @ 24VDC; 10A @ 28VDC
    Voltage Selection:
    Jumper selectable: 115VAC or 230VAC
    Fuse (115VAC):
    6.0 Amps
    Fuse (230VAC):
    3.0 Amps
    Form Factor:
    Open Frame / Panel Mount
    Certifications:
    CSA (38-82)
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Sold as-is for parts. Random testing shows ~18V DC output instead of rated voltage.
    Condition Notes:
    Power-One F24-12 DC Power Supply sold as-is for parts. Random testing shows ~18V DC output (rated 24V or 28V). Transformer shows visible heat damage. Not functional as-is. For parts or repair only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • BBN Instruments P16 Supply Box front panel showing MODEL P16 SUPPLY label, TEST ON/OFF toggle switch, red LED indicator, BNC OUT connector, and handwritten inspection label — Cambridge MA USA BBN Instruments P16 Supply Box side view showing top-mounted toggle switch, red LED indicator, and small SMA-style connector on the side face of the blue metal enclosure

    BBN Instruments P16 Supply Box BNC Test ON/OFF Switch Cambridge MA USA

    BBN Instruments

    $50.00
    Was: $100.00
    BBN Instruments P16 Supply Box BNC Test ON/OFF Switch Cambridge MA USAThe BBN Instruments Model P16 is a compact supply box designed for use in electronic test and measurement applications. Built in...
    37224
    SKU:
    37224
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    BBN Instruments
    Model:
    P16
    MPN:
    P16
    Type:
    Supply Box / Signal Supply Unit
    SKU:
    37224
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS. Unit includes toggle switch and BNC connectors as shown.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Handheld Box
    Connector Type:
    BNC
    Switch Type:
    TEST / ON / OFF Toggle Switch
    Indicator:
    Red LED
    Connector Positions:
    IN (side), OUT (front face BNC)
    Made In:
    Cambridge, MA USA
    Condition Notes:
    BBN Instruments P16 Supply Box sold AS-IS — not tested, age unknown, no functionality guarantee. Cosmetically fair with light wear. BNC connectors and toggle switch intact. For parts or repair only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $50.00
    Was: $100.00
  • Sivers Lab M3638-302010 Brusgenerator noise figure meter front panel with analog dB meter, two rotary controls, and power cable Sivers Lab M3638-302010 identification label showing BET M3638-302010, BEN BRUSGENERATOR, URSPR-BET SILAB 5825, IND-NR 1057, UH MARK CVA 7203

    Sivers Lab Stockholm M3638-302010 Brusgenerator Noise Figure Meter 50 Ohm

    Sivers Lab Stockhom

    $75.00
    Was: $150.00
    Sivers Lab Stockholm M3638-302010 Brusgenerator Noise Figure Meter 50 OhmBenchtop noise figure meter and generator manufactured by Sivers Lab in Sweden. Measures noise figure (Brusfaktor) in decibels...
    38568
    SKU:
    38568
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    30.00 LBS
    Brand:
    Sivers Lab
    Model:
    M3638-302010
    MPN:
    M3638-302010
    Secondary Model:
    Silab 5825
    Type:
    Noise Figure Meter / Noise Generator
    SKU:
    38568
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair; not tested at our facility
    Country/Region of Manufacture:
    Sweden
    Form Factor:
    Benchtop / Portable
    Power Requirements:
    110V or 220V AC, switchable
    Output Impedance:
    50 Ohm
    Measurement Type:
    Noise Figure (Brusfaktor dB)
    Meter Scale:
    Brusfaktor dB, 50 Ohm
    Max dB Range:
    10 to 20 dB (front panel selector)
    Voltage Switch:
    110V / 220V selectable
    Power Switch:
    Till (On) / Fran (Off)
    UH Mark / Asset Code:
    CVA 7203
    Ind-Nr:
    1057
    Compatible With:
    50 Ohm RF systems; noise figure measurement applications
    Condition Notes:
    Sivers Lab M3638-302010 Brusgenerator noise figure meter. Sold as-is for parts or repair; not tested at our facility. Enclosure shows moderate paint loss and scuffing. No functionality guaranteed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Telular-Adcor T111JM Cellular Transmitter – front of closed beige metal enclosure with label Telular-Adcor T111JM Cellular Transmitter – rear of closed metal enclosure showing mounting keyholes

    Telular-Adcor T111JM Cellular Transmitter Security Alarm T2B 500-3010 For Parts

    Telular-adcor Security Products

    $35.00
    Was: $70.00
    Telular-Adcor T111JM Cellular Transmitter Security Alarm T2B 500-3010 For PartsCellular alarm transmitter/communicator designed to send security system signals over cellular networks. Wall-mount...
    38588
    SKU:
    38588
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Telular-Adcor
    Model:
    T111JM
    MPN:
    T111JM
    Secondary Model:
    500-3010
    Type:
    Cellular Alarm Transmitter / Communicator
    SKU:
    38588
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair; includes UL-listed enclosure with internal PCB and wiring diagram
    Board Part Number:
    Telular-Adcor T2B P/N 500-3010
    Board Revision:
    Rev 04/94
    ESN:
    D411B31A
    Application:
    Security Alarm Cellular Communication
    Enclosure Type:
    Metal wall-mount enclosure with locking hasp
    Certifications:
    UL Listed
    Form Factor:
    Wall-Mount Enclosure
    Condition Notes:
    Telular-Adcor T111JM Cellular Transmitter sold AS-IS for parts or repair. Not tested or guaranteed functional. Includes metal enclosure, T2B PCB (P/N 500-3010), Telguard module, and wiring diagram. Cosmetic wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Magnecraft W6110DSX-1 Solid State Relay — front label showing 120VAC output, 10A, 3-32VDC input, screw terminals Magnecraft W6110DSX-1 Solid State Relay — top view showing metal heat-spreading plate with MTI marking and heatsink mounting holes

    Magnecraft W6110DSX-1 Solid State Relay 120VAC 10A Output 3-32VDC Input

    Magnecraft

    $15.00
    Was: $30.00
    Magnecraft W6110DSX-1 Solid State Relay 120VAC 10A Output 3-32VDC InputThe Magnecraft W6110DSX-1 is a single-phase solid state relay (SSR) manufactured by Magnecraft Electric Co. of Chicago, Illinois...
    38613
    SKU:
    38613
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Magnecraft
    Model:
    W6110DSX-1
    MPN:
    W6110DSX-1
    Type:
    Solid State Relay (SSR)
    SKU:
    38613
    Output Voltage:
    120 VAC
    Output Current:
    10.0 A
    Input Voltage:
    3-32 VDC
    Control Type:
    DC Control
    Load Type:
    AC Load
    General Use Rating:
    8 A
    Incandescent Lamp Rating:
    8 A
    Motor Load Rating:
    4.5 FLA
    Certifications:
    UL Listed, CSA Certified
    UL File Number:
    LR32053
    Manufacturer:
    Magnecraft Electric Co., Chicago, Illinois, USA
    Country/Region of Manufacture:
    United States
    Form Factor:
    Panel Mount / DIN Rail Compatible
    Mounting:
    Screw terminal, panel mount
    Heatsink Required:
    Yes — required for full current rating
    Phase:
    Single Phase
    Seller Notes:
    Relay only. No heatsink included.
    Condition Notes:
    Magnecraft W6110DSX-1 Solid State Relay inspected and in good used condition. Pulled from a working environment. Terminals intact, typical light wear. No heatsink included — required for full rating. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00