Description
ESI 29248 12V Power Supply Plug-In Module 12VDC 2.5A Card Cage Module Oregon
12VDC regulated power supply module designed for card cage and backplane systems. Delivers 30W continuous output via multi-pin edge connector.
Specifications & What's Included
- Output: 12.0V DC, 2.5A (30W)
- Form Factor: Card cage plug-in module
- Connector: Multi-pin edge connector (backplane compatible)
- Manufacturer: ESI (United States)
- Model: 29248
- Module only; no external cables included
Applications
Plug-in power supply modules like this were standard in industrial and telecommunications equipment through the 1990s and 2000s. Commonly used in ESI phone systems, card cage chassis, and distributed power architectures. Compatible with standard card cage backplanes using multi-pin edge connectors. Typical applications include PBX systems, network equipment, and industrial control systems requiring modular 12V DC power distribution.
Condition: Used
This ESI 29248 12V Plug-In Power Supply Module has been inspected and appears to be in good condition. It was pulled from a working environment where it was in active use. The aluminum card-cage housing shows light surface wear consistent with normal service use; the front-panel label is intact and legible. The multi-pin card-edge connector on the rear appears clean and undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
This ESI 29248 12V Plug-In Power Supply Module has been inspected and appears to be in good condition. It was pulled from a working environment where it was in active use. The aluminum card-cage housing shows light surface wear consistent with normal service use; the front-panel label is intact and legible. The multi-pin card-edge connector on the rear appears clean and undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
ESI |
Model: |
29248 |
MPN: |
29248 |
Type: |
Plug-In Power Supply Module |
SKU: |
46422 |
Output Voltage: |
12.0V DC |
Output Current: |
2.5A |
Output Power: |
30W |
Form Factor: |
Card Cage / Plug-In Module |
Connector Type: |
Multi-pin edge connector (card-cage backplane) |
Country/Region of Manufacture: |
United States |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Module only; pulled from a working environment. No external cables included. |
Condition Notes: |
ESI 29248 12V Plug-In Power Supply Module in good used condition. Pulled from a working environment. Housing shows light surface wear; front label intact; multi-pin edge connector clean and undamaged. |
