Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Rosenberger 994296c coaxial cable full view — N bulkhead female panel mount end on left, SMA right angle male end on right Rosenberger 994296c 6ft coaxial cable laid out showing full length, SMA right angle connector visible at right

    Rosenberger 994296c SMA Right Angle Male to N Bulkhead Female Coax Cable 6ft

    Rosenberger

    $38.00
    Was: $80.00
    Rosenberger 994296c SMA Right Angle Male to N Bulkhead Female Coax Cable 6ftCoaxial RF cable assembly with SMA male right-angle connector on one end and N-type female bulkhead panel mount on the...
    40882
    SKU:
    40882
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Rosenberger
    Model:
    994296c
    MPN:
    994296c
    Type:
    Coaxial RF Cable Assembly
    SKU:
    40882
    Connector A:
    SMA Male Right Angle
    Connector B:
    N-Type Female Bulkhead Panel Mount
    Cable Length:
    6 ft (approx. 1.8 m)
    Date Code:
    1405 (Week 5, 2014)
    Seller Notes:
    New open-box; cable only, no additional accessories.
    Country/Region of Manufacture:
    Germany
    Compatible With:
    RF, microwave, and wireless systems using SMA and N-type connectors
    Interface Type:
    SMA / N-Type
    Application:
    RF, Microwave, Wireless, Test & Measurement
    Condition Notes:
    Rosenberger 994296c SMA to N bulkhead coax cable — new and unused, may be out of original packaging. Both connectors clean and undamaged. Please view our photos and contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $38.00
    Was: $80.00
  • Rosenberger 994131c SMA RF coaxial cable – full cable view showing right-angle SMA connector at left and straight SMA connector at right with Rosenberger label Rosenberger 994131c SMA coaxial cable – alternate full-length view showing both gold SMA connectors and flexible black cable jacket

    Rosenberger 994131c SMA RF Coaxial Cable Right Angle to Straight SMA Connector

    Rosenberger

    $18.00
    Was: $40.00
    Rosenberger 994131c SMA RF Coaxial Cable Right Angle to Straight SMA ConnectorSMA coaxial cable assembly with male right-angle connector on one end and male straight connector on the other. Used for...
    40859
    SKU:
    40859
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Rosenberger
    Model:
    994131c
    MPN:
    994131c
    Secondary Model:
    994131c 3105
    Type:
    SMA RF Coaxial Cable Assembly
    SKU:
    40859
    Connector Type:
    SMA Male Right Angle to SMA Male Straight
    Connector Gender:
    Male to Male
    Connector Style:
    Right Angle to Straight
    Connector Plating:
    Gold-Plated
    Cable Jacket:
    Black Flexible Jacket
    Application:
    RF, Microwave, Test & Measurement
    Seller Notes:
    New open-box; may be out of original packaging.
    Country/Region of Manufacture:
    Germany
    Condition:
    New – Open Box
    Condition Notes:
    Rosenberger 994131c SMA RF Coaxial Cable is new and unused, may be out of original packaging. Connectors are clean with intact gold plating and no signs of use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA coaxial termination — front face showing SMA male connector and gold-plated hex body Omni-Spectra OSM 16179 coaxial termination — top and side view of gold hex body showing surface oxidation and label on cap

    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA Coax Termination Load

    $8.00
    Was: $15.00
    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA Coax Termination LoadFixed coaxial RF termination load designed to terminate unused ports on test equipment, network analyzers, and RF systems...
    40820
    SKU:
    40820
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Omni-Spectra
    Model:
    OSM 16179
    MPN:
    2001-6101-00
    Secondary Model:
    2001-6101-00
    Type:
    Fixed Coaxial Termination / RF Load
    SKU:
    40820
    Impedance:
    50 Ohm
    Frequency Range:
    DC to 18 GHz
    Connector Type:
    SMA (male)
    Form Factor:
    Miniature / Inline
    Seller Notes:
    Sold individually. Unit only — no accessories.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Condition Notes:
    Omni-Spectra 2001-6101-00 OSM 16179 50 Ohm 18 GHz SMA coaxial termination. Inspected, good condition. Body shows minor surface oxidation typical of age. SMA connector face clean and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $8.00
    Was: $15.00
  • ISA Riber CX 700 flow meter enclosure front-right view showing locking cabinet, flow display window, dial indicator, and water output/input brass barb fittings with blue labels ISA Riber CX 700 flow meter enclosure rear-left view showing IEC 220VAC power inlet, auxiliary interlock and water interlock circular connectors, and attached multi-pin cable

    ISA Riber CX 700 Flow Meter Enclosure 220V Legrand 150VA Autotransformer Water

    Proteus

    $200.00
    Was: $400.00
    ISA Riber CX 700 Flow Meter Enclosure 220V Legrand 150VA Autotransformer Water I/OElectronic flow meter enclosure designed for industrial and telecom applications. Houses measurement and control...
    40641
    SKU:
    40641
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    16.00 LBS
    Brand:
    ISA Riber
    Model:
    CX 700
    MPN:
    600.045
    Type:
    Electronic Flow Meter Enclosure
    SKU:
    40641
    Voltage:
    220V
    Current Rating:
    1A
    Transformer Brand:
    Legrand DERI
    Transformer Model:
    422 71
    Transformer Rating:
    150 VA
    Transformer Type:
    Reversible Autotransformer
    Transformer Input Voltage:
    220V / 120V (reversible)
    Transformer Output Voltage:
    120V / 220V (reversible)
    Frequency:
    50/60 Hz
    Serial Number (Unit):
    I7727
    Power Connector:
    IEC C14 (220VAC inlet)
    Water Connections:
    Brass barb fittings — Water Input and Water Output
    Interlock Connections:
    Auxiliary Interlock, Water Interlock (circular multi-pin)
    Enclosure Type:
    Locking enclosure with key
    Country/Region of Manufacture:
    France
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes Legrand DERI 150VA autotransformer, multi-pin cable, key for locking enclosure
    Condition Notes:
    ISA Riber CX 700 flow meter enclosure, used, pulled from working environment where it was functional. Inspected and in good condition. Includes Legrand 150VA transformer, water fittings, interlock connectors, cable, and key.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Riber TCA 380 Scan Generator front panel with kV analog meter, Scan and Modulator plug-in modules installed, rackmount chassis Riber TCA 380 Scan Generator rear panel showing multiple BNC connectors, IEC power inlet, and fuse holder

    Riber TCA 380 Scan Generator w/ Scan & Modulator Plug-ins 220V France

    Riber

    $575.00
    Was: $1,200.00
    Riber TCA 380 Scan Generator w/ Scan & Modulator Plug-ins 220V FranceThe Riber TCA 380 is a rackmount scan generator (Générateur de Balayage) designed for use with electron spectrometers and surface...
    40628
    SKU:
    40628
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    45.00 LBS
    Brand:
    Riber
    Model:
    TCA 380
    MPN:
    TCA 380
    Type:
    Scan Generator
    SKU:
    40628
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    France
    Power Requirements:
    220V AC, 0.315A
    Voltage Rating:
    220V
    Current Rating:
    0.315A
    Form Factor:
    Rackmount
    Included Plug-ins:
    Scan (Balayage) plug-in, Modulator plug-in
    Output Range:
    0–2 kV (analog meter display)
    Sweep Modes:
    Internal/External, Manual/Automatic, Single/Repeat
    Modulator Frequency:
    2.2 kHz, 22 kHz, 44 kHz selectable
    Rear Connectors – Electrometer:
    J1 Input, J2 Output, J3 Modul. Wehnelt, J4 Mesure HT
    Rear Connectors – Lock-In:
    J5 Input, J6 Output, J7 Reference Modulation
    Rear Connectors – Recorder:
    J8 Y Input, J9 X Sweep, J10 Oscilloscope
    Rear Connectors – Interface:
    J11 Signal, J12 Supply ±15V, J13 Polarisation
    Rear Connectors – HV/CMA:
    J14 Signal, J15 Supply ±15V, J16 HT Modulee
    Rear Connectors – Other:
    J17 Grid Optics, J33 Selecteur de Pics, J31 Plume
    Rear Power:
    J32 Secteur Main Power, IEC inlet with fuse
    Reference Number:
    600 045
    Application:
    Electron spectrometer / surface analysis scanning
    Seller Notes:
    Includes Scan (Balayage) and Modulator plug-in modules installed.
    Condition Notes:
    Riber TCA 380 Scan Generator inspected and in good used condition. Normal lab wear; surface oxidation on rear chassis. Front panel and kV meter intact. Scan and Modulator plug-ins installed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $575.00
    Was: $1,200.00
  • Linseis Type LY F-1510 II/83 XY flatbed chart recorder — top/front view showing paper bed, X/Y scales, and right-side control panel Linseis LY flatbed chart recorder — three-quarter front-left view showing control panel, paper carriage rails, and rubber feet

    Linseis Type LY F-1510 II/83 XY Flatbed Chart Recorder 220V 50Hz DB15 AS-IS

    Linseis

    $150.00
    Was: $300.00
    Linseis Type LY F-1510 II/83 XY Flatbed Chart Recorder 220V 50Hz DB15 AS-ISThe Linseis Type LY Nr. F-1510 II/83 is a benchtop XY flatbed chart recorder made by Linseis GmbH of Selb, Germany. Flatbed...
    40621
    SKU:
    40621
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    Linseis
    Model:
    Type LY
    MPN:
    F-1510 II/83
    Type:
    XY Flatbed Chart Recorder
    SKU:
    40621
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair. Powers on; controls unresponsive.
    Country/Region of Manufacture:
    Germany
    Power Requirements:
    220V AC, 50Hz
    Fuse Rating:
    0.2 Amp
    Interface / Connector:
    DB-15 (15-pin D-sub, rear panel)
    AC Inlet Type:
    IEC C14
    X-Axis Sensitivity:
    10 V/cm
    Y-Axis Sensitivity Range:
    0.05 mV/cm to 20 V/cm (switchable)
    Y-Axis Module:
    Module 1732 (Y-axis amplifier/sensitivity)
    X-Axis Module:
    Module 1712 (X-axis amplifier/sensitivity)
    Input Connectors:
    Banana jacks (+, -, GND) on X and Y panels; Ext banana jacks on front
    Front Panel Controls:
    Power rocker switch, Stand-by toggle, pen lift toggles, mode toggles
    Form Factor:
    Benchtop / Desktop
    Measurement Type:
    XY Analog Signal Recording
    Application / Use Case:
    Lab data recording, signal analysis, scientific measurement
    Chart Format:
    Flatbed (cut sheet paper)
    Manufacturer Location:
    Linseis GmbH, D-8672 Selb, Germany
    Condition Notes:
    Linseis Type LY F-1510 II/83 XY Flatbed Chart Recorder powers on but does not respond to controls. Sold AS-IS for parts or repair only. Not guaranteed functional. Please contact us with any questions before purchasing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • GE EM-1 RF Ground Test Unit waveguide assembly – three-quarter front view showing open frame with GE subassemblies, blue and green modules, and wiring harness GE EM-1 RF Ground Test Unit – top-down view showing waveguide sections, Airtron waveguide switch, gold-plated RF components, and multi-color wiring harness

    GE RF Ground Test Unit Waveguide Assembly EM-1 Satcom Microwave Test Set

    Hexel

    $300.00
    Was: $600.00
    GE RF Ground Test Unit Waveguide Assembly EM-1 Satcom Microwave Test SetOpen-frame RF waveguide ground test assembly manufactured by General Electric for satellite communications microwave testing...
    40608
    SKU:
    40608
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    General Electric (GE)
    Model:
    EM-1
    MPN:
    GE 7523149P15
    Secondary Model:
    GE 7813254G-6
    Type:
    RF Waveguide Ground Test Unit Assembly
    SKU:
    40608
    Condition:
    Used – Inspected
    Enclosure Manufacturer:
    Hexcel Structural Products
    Enclosure Type:
    Bonded Structure
    Date of Manufacture:
    January 31, 1977
    Job Number:
    K741421
    Subassembly 1 Part No.:
    GE 7523149P15 (Serial No. 0033)
    Subassembly 2 Part No.:
    GE 7641881G1 (Ser. 119)
    Subassembly 3 Part No.:
    GE 7813254G-6 (Ser. No. 131)
    Subassembly 4 Part No.:
    GE 7641547G1 (Ser G 021)
    Subassembly 5 Part No.:
    GE 7813327-G0
    Part Number (visible on component):
    9127-1088
    Waveguide Switch Manufacturer:
    Airtron (Division of Litton Industries)
    Airtron Location:
    Morris Plains, New Jersey
    RF Indicators:
    CR1 FWD (Forward), CR2 REV (Reverse), CR3
    Application:
    Satellite / Satcom RF Ground Test
    Technology:
    Microwave Waveguide RF
    Form Factor:
    Open-frame bench/rack assembly
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Multi-subassembly open-frame unit with Airtron waveguide switches and GE RF components. Sold as-is assembly.
    Condition Notes:
    GE EM-1 RF Ground Test Unit waveguide assembly. Inspected, good used condition. Age patina and oxidation on board contacts consistent with 1977 mfg. date. Not powered or tested at our facility. Sold as-inspected.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • Anritsu ME3401A Digital Transmission Analyzer front panel and right side 3/4 view showing display and controls Anritsu ME3401A rear and right side view showing ventilation, rear connectors, and rack mount ears

    Anritsu ME3401A Digital Transmission Analyzer DS-1 DS-2 DS-3 GPIB Options 02 03

    Anritsu

    $175.00
    Was: $350.00
    Anritsu ME3401A Digital Transmission Analyzer DS-1 DS-2 DS-3 GPIB Options 02 03 11 42Benchtop digital transmission analyzer for testing and measuring DS-1, DS-2, and DS-3 digital signals. Performs...
    40600
    SKU:
    40600
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    31.00 LBS
    Brand:
    Anritsu
    Model:
    ME3401A
    MPN:
    ME3401A
    Type:
    Digital Transmission Analyzer
    SKU:
    40600
    Options:
    02, 03, 11, 42
    Measurement Type:
    Bit Error Rate (BERT), Jitter, DS-1/DS-2/DS-3
    Signal Compatibility:
    DS-1, DS-1C, DS-2, DS-3
    DS-1 Input Impedance:
    DS-1/DS-1C: 100Ω; DS-2: 110Ω
    DS-3 Input Impedance:
    75Ω
    Interface:
    GP-IB (GPIB / IEEE-488)
    Data Input Formats:
    Unipolar, DS-1, DS-1C, DS-2, DS-3 H/L, DSX-3 H/L, AMI, B8ZS
    Framing:
    ESF (DS-1), D4 (DS-1), Unframed, Framed
    Built-In Printer:
    Yes — integrated thermal/paper tape printer
    Measurements:
    Errors, Error Rate, % EFS, ES, CRC-6, BIP-V, Frame, Parity, Bit
    Time/Jitter Display:
    Yes — hour/year, minute/month, second/day; UI p-p, YMD, UMS
    Power Input:
    AC or DC
    Form Factor:
    Benchtop
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Powers On, Good Condition
    Seller Notes:
    Includes unit with built-in printer. Options 02, 03, 11, 42 installed.
    Condition Notes:
    Anritsu ME3401A Digital Transmission Analyzer powers on and is in good condition. Options 02, 03, 11, 42 installed per rear label. Minor cosmetic wear on chassis typical of benchtop test gear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • MRC A114265 Quad 1000 RF Deck – front panel view showing ventilation grille, warning labels, Hobbs on-time meter, and connector panel with REFURBISHED SPARE tag MRC A114265 Quad 1000 RF Deck – interior top-down view showing four Eimac 3-500Z triode tubes, large inductor coils, Jennings vacuum variable capacitors, and EBM blower on right side

    MRC A114265 Quad 1000 RF Deck 3500 VDC Rev E 4x Eimac Varian 3-500Z Tubes

    MRC

    $1,900.00
    Was: $3,800.00
    MRC A114265 Quad 1000 RF Deck 3500 VDC Rev E 4x Eimac Varian 3-500Z TubesHigh-voltage RF amplifier deck designed for quad-channel operation at 3500 VDC. This unit functions as a power amplification...
    40518
    SKU:
    40518
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    MRC
    Model:
    A114265
    MPN:
    A114265
    Secondary Model:
    Quad 1000 RF Deck
    Revision:
    Rev E
    Type:
    High Voltage RF Amplifier Deck
    SKU:
    40518
    Voltage Rating:
    3500 VDC
    Number of Channels:
    4
    Tube Type:
    Eimac Varian 3-500Z Triode (x4)
    Tube Part Number:
    SK-406 / 3-500Z
    Vacuum Capacitor:
    Jennings CADD-30-0215, 3-30PF, 15KV (x4)
    Capacitance Range:
    3–30 pF
    Capacitor Voltage Rating:
    15 kV
    Blower / Fan:
    EBM (Pabst) G2E120-AR38-01, 220VAC 0.36A
    Blower Voltage:
    220 VAC, 50/60 Hz
    Transformer:
    Milwaukee Transformer Co. 3181940 / F1-32522
    Total On-Time (Hobbs Meter):
    45490.0 hours (x1.2 for 50Hz operation)
    Drive Connectors:
    J7, J8, J9, J10 (BNC-type, x4)
    Output Connectors:
    J3, J4, J5, J6 (N-type, x4)
    Main Connector:
    J1 (multi-pin circular), J2 (high-voltage coaxial)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes 4x Eimac 3-500Z tubes, 4x Jennings vacuum variable capacitors, EBM blower, Milwaukee transformer
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Chassis
    Date Code / Work Order:
    9/24/90, W/O 6-7373
    Condition Notes:
    MRC A114265 Quad 1000 RF Deck in good used condition, pulled from a working environment. All 4x Eimac 3-500Z tubes, Jennings vacuum capacitors, EBM blower, and Milwaukee transformer included. Hobbs meter reads 45,490 hrs.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $1,900.00
    Was: $3,800.00
  • Gasonics Scorpion DC Section Microwave Power Supply 12-300000-30 — front panel view showing Stand By, System On, and Microwave On indicator lights, Magnetron Total On Time display, and circuit breakers CB1 CB2 CB3 Gasonics Scorpion DC Section Microwave Power Supply 12-300000-30 — rear panel view showing cooling fan, P1 Wave Guide, P2 Service Port, RS-232, RS-485 ports, DL1-DL6 logic lines, Hi-Volt Out, Filament/Fan Out, and 208VAC input connector

    Gasonics Scorpion DC Section 12-300000-30 Microwave Power Supply 208V 30A 60Hz

    Gasonics

    $2,500.00
    Was: $5,000.00
    Gasonics Scorpion DC Section 12-300000-30 Microwave Power Supply 208V 30A 60HzThe Gasonics International / American Industrial Microwave Scorpion DC Section is a self-contained DC power supply module...
    40516
    SKU:
    40516
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    170.00 LBS
    Brand:
    Gasonics International / American Industrial Microwave
    Model:
    Scorpion DC Section
    MPN:
    12-300000-30
    Secondary Model:
    00-700115-01
    SKU:
    40516
    Type:
    Microwave DC Section Power Supply
    Condition:
    As-Is / For Parts or Not Working
    Input Voltage:
    208V AC
    Input Current:
    30A
    Input Frequency:
    60Hz
    Phase:
    Single Phase
    Manufacture Date:
    December 1997
    Circuit Breakers:
    CB1 Main 30A, CB2 Controller 1A, CB3 Filament Fan 2A
    Outputs:
    Hi-Volt Out, Filament/Fan Out, DL1-DL6 logic lines
    DL Voltage Lines:
    DL1 5V1, DL2 -15V, DL3 5V2, DL4 +15V, DL5 +12V, DL6 COMM
    Interfaces / Ports:
    P1 Wave Guide, P2 Service Port, COM3 RS-232, COM1/COM2 RS-485
    Front Panel Indicators:
    Stand By, System On, Microwave On indicator lights
    Magnetron Total On Time Display:
    Digital display (seconds)
    Form Factor:
    Benchtop / Rack-Mountable
    Application:
    Magnetron/microwave power for plasma etch, semiconductor processing
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Sold as-is for parts or repair. Unit cannot be tested at our facility.
    Condition Notes:
    Gasonics Scorpion DC Section Microwave Power Supply 12-300000-30 sold as-is, for parts or repair. Cannot be tested at our facility. No functionality guaranteed. Review photos carefully.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,500.00
    Was: $5,000.00
  • Coaxial RF cable assembly showing SMA male right-angle connector at top and N female connector at bottom, full cable view Coaxial RF cable assembly reversed view showing N female connector at top and SMA male right-angle connector at bottom

    Coaxial RF Cable Assembly SMA Male Right Angle to N Female 5 Inch Pigtail

    Coaxial Cable

    $12.00
    Was: $25.00
    Coaxial RF Cable Assembly SMA Male Right Angle to N Female 5 Inch PigtailRF coaxial cable pigtail with SMA male right angle connector and N female straight connector. Used for connecting RF...
    40458
    SKU:
    40458
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    7874
    MPN:
    7874
    Type:
    Coaxial RF Cable Assembly / Pigtail
    SKU:
    40458
    Connector 1:
    SMA Male Right Angle
    Connector 2:
    N Female
    Cable Length:
    5 inches (approx.)
    Cable Jacket Color:
    Black
    Connector 1 Material:
    Gold-plated brass
    Connector 2 Material:
    Nickel-plated
    Configuration:
    Right Angle to Straight
    Application:
    RF, Wireless, Antenna, Telecom
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Cable only. No additional accessories included.
    Condition Notes:
    Coaxial RF cable assembly, SMA male right angle to N female, 5 inch. Inspected and in good condition. Cable jacket intact, connectors clean, threads undamaged. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Siemens V30141-Z0113-A008 custom rectifier – left front three-quarter view showing perforated mesh enclosure and terminal strip with color-coded wiring Siemens V30141-Z0113-A008 rectifier – right front three-quarter view showing rear panel connectors J1, J2, terminal block TB1, and UL label

    Siemens V30141-Z0113-A008 48VDC 7A Custom Rectifier 110/220VAC B900

    Siemens

    $175.00
    Was: $350.00
    Siemens V30141-Z0113-A008 48VDC 7A Custom Rectifier 110/220VAC B900Industrial-grade AC-to-DC power supply rectifier module manufactured by Acme Electric for Siemens telecom and control applications...
    40381
    SKU:
    40381
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    48.00 LBS
    Brand:
    Siemens
    Model:
    V30141-Z0113-A008
    MPN:
    V30141-Z0113-A008-3-B900
    Secondary Model:
    B900
    Type:
    Component Type Custom Rectifier
    SKU:
    40381
    Manufacturer / OEM Builder:
    Acme Electric Corporation
    Acme Electric Part Number:
    PS-73498
    Input Voltage:
    110V AC at 60Hz / 220V AC at 60Hz
    Input Current:
    5A at 110V; 2.5A at 220V
    Output Voltage:
    48 VDC
    Output Current:
    7 Amps
    Frequency:
    60 Hz
    Power Requirements:
    110V AC at 60Hz (5A) or 220V AC at 60Hz (2.5A)
    Certifications:
    UL Listed (Telephone Appliances); CSA
    Capacitor (Internal):
    Sprague Powerlytic 36D7990 23400uF 75WVDC
    Transformer (Internal):
    Acme Electric T-78950, EIA 413-8451, B-3223-A
    Filter Capacitor (Internal):
    Aerovox H92R6607F 7uF 660V 60Hz
    EIA Designation:
    EIA 413-8505
    Condition:
    Used – Inspected and in Good Condition
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only — no additional accessories included.
    Form Factor:
    Enclosed Chassis / Benchtop
    Condition Notes:
    Siemens V30141-Z0113-A008 48VDC 7A custom rectifier. Inspected and in good used condition. Enclosure, connectors, and terminal block intact with normal wear. No obvious damage noted.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Lambda LP-521-FM regulated DC power supply — three-quarter front view showing analog volt and amp meters, output voltage and current limiter knobs, and olive-green vented chassis Lambda LP-521-FM front panel close-up showing DC Volts and DC Amperes analog meters, On/Off toggle, output voltage and current limiter controls, and output binding posts

    Lambda LP-521-FM Regulated DC Power Supply 0-20V 3.3A Benchtop Lab Variable

    Lambda

    $55.00
    Was: $100.00
    Lambda LP-521-FM Regulated DC Power Supply 0-20V 3.3A Benchtop Lab VariableBenchtop regulated DC power supply manufactured by Lambda Electronics Corp. Provides variable output from 0–20V DC at up to...
    40150
    SKU:
    40150
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    17.00 LBS
    Brand:
    Lambda
    Model:
    LP-521-FM
    MPN:
    LP-521-FM
    Type:
    Regulated DC Bench Power Supply
    SKU:
    40150
    Output Voltage:
    0–20V DC (variable)
    Output Current:
    3.3A max (at 30°C)
    Max Ratings by Temperature:
    3.3A@30°C, 3.0A@40°C, 2.6A@50°C, 2.3A@60°C
    Input Voltage:
    105–132V AC
    Input Frequency:
    47–440 Hz
    Number of Outputs:
    1
    Programmable:
    No
    Output Type:
    DC
    Form Factor:
    Benchtop
    Front Panel Meters:
    Dual analog meters: DC Volts and DC Amperes
    Controls:
    Output Voltage knob, Current Limiter knob, On/Off switch
    Output Terminals:
    Binding posts: +V, -V, +S, -S, PO, GND
    Manufacturer:
    Lambda Electronics Corp. (a Veeco subsidiary)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Includes AC power cord. Cosmetic crack on bottom-right corner of front face.
    Condition Notes:
    Lambda LP-521-FM DC power supply tested and in working order. Cosmetic crack on bottom-right corner of front face — does not affect function. Includes AC power cord. Good working condition overall.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Magni VS561 PAL/NTSC/CAV Vectorscope – three-quarter front view showing powered CRT display with green dot trace and open top with internal PCBs and power supply exposed due to missing covers Magni VS561 Vectorscope front panel close-up showing INPUT (CH A, CH B, CH C), DISPLAY (VEC, AUD), FORMAT (CPST, YPbPr, GBR), GAIN and PHASE knobs, REF selector, and REMOTE section with Magni Systems Inc. Beaverton OR USA label

    Magni VS561 PAL/NTSC/CAV Vectorscope 90-250V BNC For Parts No Covers

    Magni

    $95.00
    Was: $200.00
    Magni VS561 PAL/NTSC/CAV Vectorscope 90-250V BNC For Parts No CoversThe Magni VS561 is a professional PAL/NTSC/CAV vectorscope manufactured by Magni Systems, Inc. of Beaverton, Oregon. A vectorscope...
    40149
    SKU:
    40149
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    Magni Systems
    Model:
    VS561
    MPN:
    VS561
    Type:
    PAL/NTSC/CAV Vectorscope
    SKU:
    40149
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Powers on and lights up; untested further. Missing side and top covers.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop
    Power Requirements:
    90-250V AC, 50/60Hz
    Power Consumption:
    55W Max
    Fuse Rating:
    1.6A (Slow)
    Video Standards:
    PAL, NTSC, CAV
    Display Formats:
    CPST, YPbPr, GBR
    Input Channels:
    3 channels per input (CH A, CH B, CH C)
    Number of Inputs:
    2 (Input 1, Input 2)
    Input Connector Type:
    BNC
    Loop-Through:
    75 Ohm loop-through on all channels
    External Reference:
    EXT REF BNC input with 75 Ohm loop-through
    Auxiliary Input:
    AUX INPUT – DB-15 connector
    Remote Connector:
    DB-9 (REMOTE)
    R-Y Output:
    BNC rear panel
    AC Connector:
    IEC C14 (AC LINE/FUSE)
    Reference Modes:
    INT, EXT, TEST
    Gain Settings:
    VAR, x5
    Phase Adjustment:
    VAR, +V, PAL
    Manufacturer:
    Magni Systems, Inc., Beaverton, OR, USA
    Compatible With:
    Broadcast PAL/NTSC/CAV video production systems
    Condition Notes:
    Magni VS561 PAL/NTSC/CAV Vectorscope powers on and CRT lights up but is untested further. Sold AS-IS for parts or repair. Missing side and top covers. Internal boards exposed. Rear connectors appear intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • Extender Board Logic 114473-001 Rev B PCB module — top view showing green PCB body and gold-finger edge connector along top edge Extender Board Logic 114473-001 Rev B PCB module — reverse side view showing blue card-edge connector along bottom and partial label in upper left

    Extender Board Logic PCB Module Assy 114473-001 Rev B Logic Analyzer Card

    Extender Board Logic

    $65.00
    Was: $125.00
    Extender Board Logic PCB Module Assy 114473-001 Rev B Logic Analyzer CardThis is an Extender Board Logic PCB module, Assembly 114473-001, Revision B. PCB extender boards like this one are passive...
    40094
    SKU:
    40094
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    114473-001
    MPN:
    114473-001
    Type:
    PCB Extender Board
    SKU:
    40094
    Revision:
    Rev B
    Assembly Number:
    Assy 114473-001
    Form Factor:
    Card / Module
    Connector Type:
    Gold-finger edge connector; blue card-edge connector
    PCB Color:
    Green
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Extender board only; no additional accessories included.
    Condition Notes:
    Extender Board Logic 114473-001 Rev B PCB module. Inspected and in good used condition. PCB clean and intact; gold-finger and blue card-edge connectors show no damage or corrosion.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Varian 01000281-00E RF Input Module top view with two attached semi-rigid RF cables and SMA/TNC connectors on black housing Varian 01000281-00E RF Input Module front panel closeup showing 'CALIBRATED AT TEST' label, dual TNC connectors, calibrated dB and GHz frequency table (14.00–14.50 GHz), and SMA adapter

    Varian 01000281-00E RF Input Module 14 GHz SMA Calibrated Satellite

    Varian

    $35.00
    Was: $70.00
    Varian 01000281-00E RF Input Module 14 GHz SMA Calibrated SatelliteRF input module designed for Ku-band satellite uplink applications. This benchtop module conditions and routes 14 GHz RF signals...
    40030
    SKU:
    40030
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Varian
    Model:
    01000281-00E
    MPN:
    01000281-00E
    Type:
    RF Input Module
    SKU:
    40030
    Frequency Range:
    14.00 – 14.50 GHz
    Frequency Band:
    Ku-band
    Connector Type:
    SMA, TNC
    Calibration:
    Calibrated at Test
    Included Cables:
    01-005462-00(A), 01-005464-00(A)
    Cable Date Code:
    LEE MAH 91 20 / LEE MAH 91 25
    Form Factor:
    Module / Benchtop
    Application:
    Satellite uplink RF signal input, Ku-band
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes two semi-rigid RF cables: 01-005462-00(A) and 01-005464-00(A)
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Varian 01000281-00E RF Input Module inspected and in good used condition. Housing shows minor wear; SMA and TNC connectors intact. Two semi-rigid RF cables included (01-005462-00(A) & 01-005464-00(A)).
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • RF Input Module 2 01000281-C front panel with SMA connectors and attached coaxial cable leads, angled view RF Input Module 2 01000281-C close-up of front panel showing CALIBRATED AT TEST label, GHz frequency markings (5925–6425) and dB attenuation columns

    RF Input Module 2 01000281-C 5925-6425MHz 12.2-52.4dB C-Band Attenuator SMA

    RF

    $65.00
    Was: $125.00
    RF Input Module 2 01000281-C 5925-6425MHz 12.2-52.4dB C-Band Attenuator SMARF input attenuator module for C-Band applications. Provides variable attenuation control across the 5925–6425 MHz frequency...
    40029
    SKU:
    40029
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    RF Input Module 2
    MPN:
    01000281-C
    Type:
    RF Input Attenuator Module
    SKU:
    40029
    Condition:
    Used – Inspected
    Frequency Range:
    5925–6425 MHz (C-Band)
    Attenuation Range:
    12.2–52.4 dB
    Connector Type:
    SMA
    Calibration:
    Calibrated at Test
    Form Factor:
    Module / Panel-Mount
    Band:
    C-Band
    Seller Notes:
    Includes attached SMA coaxial cable leads as shown in photos.
    Condition Notes:
    RF Input Module 2 (01000281-C) inspected and in good used condition. Front panel markings legible, SMA connectors intact, coaxial leads present and undamaged. Light surface wear on housing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • RF Tubing Calibrated Input Module 01000281-C – full assembly view showing black chassis with semi-rigid coaxial tubing, N-type connector end, and SMA end RF Tubing Calibrated Input Module 01000281-C – front panel closeup showing 'CALIBRATED AT TEST' label, two panel connectors, and printed dB and GHz calibration table (5925–6425 MHz)

    RF Tubing Calibrated Input Module 01000281-C 5925-6425 MHz N-Type SMA

    RF Tubing

    $95.00
    Was: $200.00
    RF Tubing Calibrated Input Module 01000281-C 5925-6425 MHz N-Type SMACalibrated RF input module designed for microwave and telecom test applications. Semi-rigid coaxial tubing assembly with N-type...
    40028
    SKU:
    40028
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    01000281-C
    MPN:
    01000281-C
    Type:
    RF Tubing Calibrated Input Module
    SKU:
    40028
    Frequency Range:
    5925–6425 MHz (5.925–6.425 GHz)
    Calibration Frequencies (GHz):
    5925, 6050, 6175, 6300, 6425
    Input dB Values (Left Port):
    12.2, 12.2, 12.2, 12.3, 12.3 dB
    Output dB Values (Right Port):
    51.8, 51.6, 51.5, 51.5, 51.5 dB
    Connector Type 1:
    N-Type (female, on cable end)
    Connector Type 2:
    SMA (on cable end)
    Panel Connectors:
    2x BNC-style panel jacks (front face)
    Transmission Line Type:
    Semi-rigid RF coaxial tubing
    Calibration Status:
    Calibrated at Test (labeled on unit)
    Form Factor:
    Benchtop / Module
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes module with attached semi-rigid RF tubing, N-type end, and SMA end
    Condition Notes:
    RF Tubing Calibrated Input Module 01000281-C has been inspected and is in good used condition. Chassis intact, calibration label legible, semi-rigid tubing and connectors present. Light shelf wear. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • Philips BTS PA-3001A Audio Power Supply module – front-left angled view showing AUDIO PA-3001 label, green LED indicator, and vented top panel Philips BTS PA-3001A Audio Power Supply – rear-left angled view showing IEC C14 AC inlet, TE and PE binding post terminals, and CE marking

    Philips BTS ASSY PA-3001A Audio Power Supply 120/240V 47-63Hz Broadcast

    Broadcast Television Systems

    $55.00
    Was: $100.00
    Philips BTS ASSY PA-3001A Audio Power Supply 120/240V 47-63Hz Broadcast Slide-in power supply module designed for Philips BTS broadcast television systems. Converts AC input to regulated DC output...
    40021
    SKU:
    40021
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Philips
    Model:
    PA-3001A
    MPN:
    ASSY PA-3001A
    Type:
    Audio Power Supply Module
    SKU:
    40021
    Condition:
    Used – Inspected
    Seller Notes:
    Philips BTS PA-3001A Audio PS module; unit only, no additional accessories
    Country/Region of Manufacture:
    United States
    Form Factor:
    Slide-In Module
    Power Requirements:
    120/240V AC, 47-63Hz
    Input Voltage:
    120/240V AC
    Input Current:
    120V: 1.5A / 230V: 1.80A
    Frequency:
    47-63Hz
    Fuse Rating:
    120V: 1.5A 250V Slow Blow / 230V: T 1.80A 250V
    Application:
    Broadcast Television Systems Audio
    Manufacturer:
    Broadcast Television Systems — A Philips Company
    Compatible With:
    Philips BTS broadcast television systems
    Input Connector:
    IEC C14 (3-pin male inlet)
    Output Terminals:
    TE and PE binding posts
    Indicators:
    DC power LED (green), Power On switch, Lock mechanism
    Hardware Revision:
    D
    Condition Notes:
    Philips BTS PA-3001A Audio Power Supply. Inspected and in good condition. Normal wear from prior broadcast use. Housing, IEC inlet, binding posts, and front controls intact. See photos for details.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Cosmodyne 3200532-1 dial pressure gauge front view showing 0-15 PSI scale with black panel-mount housing Cosmodyne 3200532-1 gauge face close-up showing PRESSURE P.S.I. label, black pointer, and 0-15 PSI scale markings

    Cosmodyne 3200532-1 Dial Pressure Gauge 0-15 PSI Panel Mount Brass NPT Fitting

    Cosmodyne

    $20.00
    Was: $40.00
    Cosmodyne 3200532-1 Dial Pressure Gauge 0-15 PSI Panel Mount Brass NPT FittingAnalog dial pressure gauge for monitoring system pressure in industrial and telecom applications. Designed for direct...
    39983
    SKU:
    39983
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cosmodyne
    Model:
    3200532-1
    MPN:
    3200532-1
    Type:
    Dial Pressure Gauge
    SKU:
    39983
    Pressure Range:
    0-15 PSI
    Display Type:
    Analog Dial
    Scale Units:
    PSI (Pounds per Square Inch)
    Mounting Style:
    Panel Mount
    Process Connection:
    Brass NPT (bottom/rear entry)
    Housing Color:
    Black
    Dial Color:
    White
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only, no additional accessories included.
    Form Factor:
    Round Panel Gauge
    Condition Notes:
    Cosmodyne 3200532-1 dial pressure gauge, 0-15 PSI. Inspected and in good used condition. Dial face clean and legible; black housing shows light surface wear; brass NPT fitting intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00