Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Computer Products NFS40-7912 open-frame switching power supply — front/top view showing PCB, transformer, capacitors, and multi-pin wire harness Computer Products NFS40-7912 switching power supply — angled reverse view showing component side and output wire harness connectors

    Computer Products NFS40-7912 12VDC 4A Switching Power Supply 100-230VAC Open

    Computer Products

    $40.00
    Was: $80.00
    Computer Products NFS40-7912 12VDC 4A Switching Power Supply 100-230VAC Open FrameOpen-frame switching power supply that converts 100-230VAC input to regulated 12VDC at 4A output. Board-level unit...
    39953
    SKU:
    39953
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Computer Products
    Model:
    NFS40-7912
    MPN:
    NFS40-7912
    Secondary Model:
    720132-34
    SKU:
    39953
    Type:
    Open-Frame Switching Power Supply
    Output Voltage:
    12V DC
    Output Current:
    4A
    Output Power:
    48W
    Input Voltage:
    100-230V AC
    Input Current:
    1.3-0.65A
    Input Frequency:
    50/60Hz
    Form Factor:
    Open Frame / Board-Level (No Enclosure)
    Power Requirements:
    100-230VAC, 1.3-0.65A, 50/60Hz
    Output Connector:
    Multi-pin wire harness
    Revision:
    Rev Y
    Compatible With:
    Pacesetter APSu 3251 Portable Thermal Printer
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Open-frame board only, no enclosure. Tested — outputs 12VDC confirmed.
    Country/Region of Manufacture:
    China
    Certifications:
    UL Listed, CE, CSA
    Condition Notes:
    Computer Products NFS40-7912 switching power supply tested good — confirmed 12VDC output on our multimeter. Good working order. Open-frame board only, no enclosure. Normal wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Varian VZC6961D7A1 C-Band TWTA – front panel with Varian logo, status/fault LED indicators, helix current meter, power and HV switches Varian VZC6961D7A1 C-Band TWTA – rear panel showing waveguide RF output flange, fuse holders, D-sub control connector, local/remote switch, and cooling vents

    Varian VZC6961D7A1 C-Band TWTA 5.9-6.4 GHz 50dB Gain Satcom Upconverter

    Varian

    $1,500.00
    Was: $3,000.00
    Varian VZC6961D7A1 C-Band TWTA 5.9-6.4 GHz 50dB Gain Satcom Upconverter TransmitterC-Band traveling wave tube amplifier (TWTA) for satellite uplink transmission. Provides 50 dB gain across 5.9–6.4...
    39941
    SKU:
    39941
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    45.00 LBS
    Brand:
    Varian
    Model:
    VZC6961D7A1
    MPN:
    VZC6961D7A1
    Type:
    C-Band Traveling Wave Tube Amplifier (TWTA)
    SKU:
    39941
    Frequency Range:
    5.9 – 6.4 GHz
    Frequency Band:
    C-Band
    Gain:
    50 dB
    RF Output Interface:
    Waveguide (WR-137 flange)
    RF Input Connector:
    Type N (front panel)
    RF Sample Connector:
    Type N (front panel)
    Control Interface:
    Local/Remote switch; 25-pin D-Sub connector
    TWT Type:
    VTC-6161H4
    Heater Voltage (Ef):
    6.3 V
    Collector Voltage (Eb):
    2400 Vdc
    Helix-GND Voltage (Ew):
    4800 Vdc
    Upconverter Module:
    Western Microwave ICW-9070
    TWT P/N:
    113798-03
    Code Ident:
    59782
    Form Factor:
    Rackmount, 2U
    Country/Region of Manufacture:
    United States
    Application:
    Satellite uplink, C-band earth station transmitter
    Front Panel Indicators:
    Power, Filtd, Stdby, HV ON, Fault; Temp, VSWR, Int, Ext, Helix
    Front Panel Controls:
    POWER switch, HV ON/OFF/RESET switch, IND RESET button, RF Gain Adj knob, Helix Current meter
    Condition:
    Used – Inspected and in good condition
    Seller Notes:
    Unit only; no cables or accessories observed. Western Microwave ICW-9070 upconverter installed internally.
    Condition Notes:
    Varian VZC6961D7A1 C-Band TWTA inspected and in good used condition. Front panel controls, indicators, and meters intact. Waveguide output shows minor surface wear. Interior TWT and upconverter assembly present and complete.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $1,500.00
    Was: $3,000.00
  • Cylix DB25-PARLL isolated loop data line surge protector — top/front view showing DB25 female connector and green ground wire with spade lug Cylix DB25-PARLL data line surge protector — reverse side showing DB25 male connector and UL listing label on housing

    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All Pins

    Cylix

    $24.80
    Was: $50.00
    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All PinsInline surge and transient protection device for DB25 parallel and RS-232 serial data connections. Protects all 25 pins using...
    39868
    SKU:
    39868
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cylix
    Model:
    DB25-PARLL
    MPN:
    DB25-PARLL
    Type:
    Isolated Loop Data Line Surge Protector
    SKU:
    39868
    Connector Type:
    DB25 (25-Pin D-Sub)
    Pin Protection:
    All 25 Pins
    Protection Type:
    Isolated Loop / Surge & Transient
    Interface:
    DB25 Parallel / RS-232 Serial
    Ground Connection:
    Earth Ground Wire (Green, Spade Lug)
    UL Listed:
    Yes
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes ground wire with spade lug connector. Unit only — no additional accessories.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Inline / Pass-Through
    Condition Notes:
    Cylix DB25-PARLL Isolated Loop Surge Protector inspected and in good condition. Housing intact, DB25 connectors clean, ground wire present. Minor normal surface wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $24.80
    Was: $50.00
  • APC PSP25 ProtectNet Serial Parallel Port Surge Protector — front view showing DB25 male connector and red retention screws APC PSP25 ProtectNet Serial Parallel Port Surge Protector — rear view showing DB25 female connector port side

    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 Lines

    APC

    $11.90
    Was: $25.00
    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 LinesThe APC PSP25 ProtectNet is an inline isolated loop circuit protector designed to safeguard serial and parallel port data...
    39867
    SKU:
    39867
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    APC
    Model:
    PSP25
    MPN:
    PSP25
    Type:
    Serial/Parallel Port Surge Protector
    SKU:
    39867
    Connector Type:
    DB25 (25-pin) Male to Female
    Number of Lines Protected:
    25
    Protection Type:
    Isolated Loop Circuit Protection
    Compatible With:
    Serial and Parallel port devices, DB25 interfaces
    Certifications:
    UL Listed (13KA)
    Country/Region of Manufacture:
    China
    Form Factor:
    Inline Adapter
    Seller Notes:
    Unit only — no packaging or accessories.
    Condition:
    Used – Inspected
    Condition Notes:
    APC PSP25 ProtectNet Serial/Parallel Port Surge Protector. Inspected and in good used condition. Housing shows minor surface scuffing; DB25 connectors clean and intact, retention screws present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $11.90
    Was: $25.00
  • Varian VZC-6965F7 700W C-Band TWTA amplifier stacked with TWTA power supply unit — front view, both chassis on pallet Varian VZC-6965F7 front panel close-up showing RF Drive Power, RF Reflected Power, and RF Output Power digital meters with control switches

    Varian VZC-6965F7 700W C-Band TWTA & Power Supply 01008290-00 RF Assy For Parts

    Varian

    $750.00
    Was: $1,500.00
    Varian VZC-6965F7 700W C-Band TWTA & Power Supply 01008290-00 RF Assy For PartsThis is a matched, serialized two-unit set consisting of a Varian VZC-6965F7 700-watt C-Band traveling wave tube...
    39838
    SKU:
    39838
    Availability:
    This item requires freight shipping. Please contact us for a shipping quote or to arrange local pickup.
    Weight:
    305.00 LBS
    Brand:
    Varian
    Model:
    VZC-6965F7
    Secondary Model:
    01008290-00
    MPN:
    VZC-6965F7
    RF Assembly P/N:
    01007747-03
    Power Supply Model:
    01008290-00
    RF Assembly Model:
    VZC6965F7-7SR
    SKU:
    39838
    Type:
    C-Band Traveling Wave Tube Amplifier (TWTA)
    Frequency Band:
    C-Band
    Output Power:
    700 W
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Matched set: TWTA amplifier + power supply. Tube tested bad, no RF output. AS-IS.
    Filament Hours:
    32082 hours (per front-panel meter)
    Power Input:
    120 VAC (per rear panel label)
    Connectors - RF:
    RF IN, RF OUT (waveguide flange on rear)
    Connectors - Control:
    JSA, JSB (D-sub), J2, J3, J4, J5 (circular)
    Cooling:
    Forced air — dual large axial fans
    Form Factor:
    Rackmount / Freestanding Chassis, 2-unit stacked set
    Country/Region of Manufacture:
    United States
    Manufacturer:
    Varian Microwave Equipment Products, Santa Clara, CA
    Application:
    Satellite uplink, C-Band RF amplification
    Includes:
    TWTA amplifier unit + matched TWTA power supply
    Shipping:
    Freight shipping required — contact seller for quote
    Condition Notes:
    Varian VZC-6965F7 700W C-Band TWTA — TWT tube tested bad, no RF output. Sold AS-IS for parts or repair. Matched set with power supply 01008290-00. Freight shipping required. Contact us for quote.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $750.00
    Was: $1,500.00
  • Sony ANL-42 1-689-131-11 PCB card front view showing components, ICs, and rating markings 4A 125V Sony ANL-42 circuit board rear/solder side view showing PCB traces and connector pads

    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board Module

    Sony

    $20.00
    Was: $40.00
    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board ModuleInternal circuit board card designed for Sony industrial and telecom equipment. This PCB module handles power distribution and...
    39827
    SKU:
    39827
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Sony
    Model:
    ANL-42
    MPN:
    1-689-131-11
    Type:
    Internal PCB Circuit Board Card
    SKU:
    39827
    Voltage Rating:
    125V
    Current Rating:
    4A
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Card / Module
    Certifications:
    UL (mark visible on board)
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Board only; no enclosure or cables included.
    Condition Notes:
    Sony ANL-42 1-689-131-11 PCB card inspected and in good used condition. No visible damage, burnt components, or broken traces. Pulled from equipment. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • CLI Compression Labs Magnitude MPEG-2 DVB satcom multiplexer chassis — three-quarter front-left view showing full populated card cage on pallet CLI Compression Labs Magnitude 410111-01 multiplexer system — rear three-quarter view showing rear card connectors, lower power supply bay, and AC power cable

    CLI Compression Labs Magnitude 410111-01 MPEG-2 DVB Satcom Multiplexer System

    CLI

    $850.00
    Was: $1,700.00
    CLI Compression Labs Magnitude 410111-01 MPEG-2 DVB Satcom Multiplexer SystemRackmount MPEG-2 DVB satellite multiplexer and encoder system designed for video contribution and DVB uplink applications...
    39800
    SKU:
    39800
    Availability:
    Usually ships within 3-5 business days due to size and weight.
    Weight:
    265.00 LBS
    Brand:
    CLI Compression Labs Inc.
    Model:
    Magnitude
    MPN:
    410111-01
    Type:
    MPEG-2 DVB Satellite Multiplexer / Encoder System
    SKU:
    39800
    Form Factor:
    Rackmount Chassis
    Standard:
    DVB, MPEG-2
    Application:
    Satellite Broadcasting, DVB Uplink, Video Contribution
    Power Requirements:
    120 VAC, 60 Hz, 12 A (chassis label)
    Power Connector:
    30A 250V Twist-Lock
    Power Supply Model:
    Tectrol TO620/11-1054 Rev.E
    Power Supply Input:
    115/230 VAC, 60/50 Hz, 10A
    Power Supply Output:
    620W Max., CSA Level 6
    Number of Power Supplies:
    4 (hot-swap)
    Video Encoder Module:
    CLI Video Encoder M1, P/N 410444 / 410538 (x6)
    Audio Encoder Module:
    CLI Audio Encoder MPEG2, P/N 410588 (x7)
    Remux Input Unit:
    General Instrument RIU Remux Input Unit, P/N 410774-01
    Chassis Interface Module:
    CLI Chassis I/F M1, P/N 410002-01
    Fan Assembly:
    Comair Rotron Muffin-XL MX2A1, 6-fan, 115V 50/60Hz
    Audio Encoder Chipset:
    Motorola DSP56001AFC27; SGS-Thomson SF9701P
    Seller Notes:
    Complete system: 6x video encoders, 7x audio encoders, RIU, chassis I/F, 4x hot-swap PSUs, 6-fan assembly
    Country/Region of Manufacture:
    USA
    Interface Type:
    BNC, DB-25, RJ45
    Condition:
    Used – Inspected
    Condition Notes:
    CLI Compression Labs Magnitude 410111-01 MPEG-2 DVB Multiplexer system inspected and in good used condition. Fully populated with 6 video encoders, 7 audio encoders, RIU, chassis I/F, 4 hot-swap PSUs, and 6-fan assembly. Normal rack wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $850.00
    Was: $1,700.00
  • General Instrument Magnitude MMI+ 410802-03 Multiplexer Modulator Interface – front-left three-quarter view showing front panel, rack ears, and rear port array General Instrument Magnitude MMI+ 410802-03 – rear panel close-up showing A MUX IN, B MUX IN, Modem OUT 1, 3, 4, 5, DVB Modem OUT, and DVB Modem IN DB-15 and DB-25 connectors

    General Instrument Magnitude MMI+ 410802-03 Multiplexer Modulator Interface 1U

    General Instrument

    $125.00
    Was: $250.00
    General Instrument Magnitude MMI+ 410802-03 Multiplexer Modulator Interface 1UThe General Instrument Magnitude MMI+ (part number 410802-03) is a 1U rackmount Multiplexer/Modulator Interface designed...
    39795
    SKU:
    39795
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.50 LBS
    Brand:
    General Instrument
    Model:
    MMI+
    MPN:
    410802-03
    Secondary Model:
    Magnitude MMI Plus
    Type:
    Multiplexer / Modulator Interface
    SKU:
    39795
    Condition:
    Used – Inspected
    Form Factor:
    1U Rackmount
    Power Requirements:
    AC 100-240V, 60-50 Hz, 0.5-0.3 A
    Fuse Rating:
    1A, 250VAC
    Interface Type:
    HSSI I/O, DVB Modem, EXT Sync, Alarm Cable
    Number of Ports:
    8 rear ports: A/B MUX IN, Modem OUT 1/3/4/5, DVB Modem OUT/IN
    Connector Types:
    DB-15, DB-25, BNC (EXT sync), IEC AC inlet
    Front Panel Indicators:
    MUX, DVB, SS, CLK, PLL, FRM, OLL LEDs
    DIP Switch Control:
    Internal mode, frequency, packet length, loopback selectors
    Compatible With:
    General Instrument Magnitude headend systems
    Manufacturer:
    Magnitude Compression Systems, Inc.
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; no accessories included. Inspected and in good condition.
    Condition Notes:
    General Instrument Magnitude MMI+ 410802-03 Multiplexer/Modulator Interface. Inspected and in good used condition. Chassis is clean with light surface wear. All connectors appear intact. No accessories included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • General Instrument Magnitude 00-410809-01 DVB Scrambling Unit – front panel view showing MAGNITUDE label, DB-9 ports, and rack ears General Instrument Magnitude DVB Scrambling Unit – left side panel detail showing SYS SUP IN, SYS SUP OUT, CAE IN, TEST, and MUX IN DB-9 connectors and CLOCK IN BNC

    General Instrument Magnitude 00-410809-01 DVB Scrambling Unit 19" Rackmount

    General Instrument

    $100.00
    Was: $200.00
    General Instrument Magnitude 00-410809-01 DVB Scrambling Unit 19" RackmountDVB conditional access scrambling unit designed for satellite headend operations. Handles DVB parallel output and clock...
    39790
    SKU:
    39790
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    19.00 LBS
    Brand:
    General Instrument
    Model:
    Magnitude 00-410809-01
    MPN:
    00-410809-01
    Type:
    DVB Scrambling Unit
    SKU:
    39790
    Product Line:
    Magnitude Compression Systems
    Form Factor:
    19" 1U Rackmount
    Power Requirements:
    AC 100-240V, 0.8/0.4A, 50-60Hz
    Country/Region of Manufacture:
    United States
    Interface Type:
    DB-9, DB-25, BNC
    Ports / Connectors:
    SYS SUP IN, SYS SUP OUT, CAE IN, TEST, MUX IN, CLOCK IN, DVB Parallel Out
    Application:
    DVB conditional access scrambling, satellite headend
    Standards:
    DVB (Digital Video Broadcasting)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from a working satellite headend environment.
    Condition Notes:
    General Instrument Magnitude 00-410809-01 DVB Scrambling Unit. Inspected, in good used condition. Pulled from a working headend environment where it was in active use. Light surface wear. Connectors and controls intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • HP 3712A IF/BB Receiver and HP 3793B Diff Phase Detector combined Microwave Link Analyzer chassis — front three-quarter view showing CRT display and control panels HP 3712A IF/BB Receiver label close-up showing model number and Hewlett-Packard branding, with property ID tag 201596

    HP 3712A 3793B IF/BB Receiver Diff Phase Detector Microwave Link Analyzer

    HP

    $173.00
    Was: $350.00
    HP 3712A 3793B IF/BB Receiver Diff Phase Detector Microwave Link AnalyzerThe HP 3712A IF/BB Receiver and HP 3793B Differential Phase Detector together form the receiver portion of the Hewlett-Packard...
    39762
    SKU:
    39762
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    53.00 LBS
    Brand:
    HP
    Model:
    3712A / 3793B
    MPN:
    3712A
    Secondary Model:
    3793B
    Type:
    IF/BB Receiver and Differential Phase Detector
    SKU:
    39762
    Condition:
    Used – Inspected
    Seller Notes:
    Includes HP 3712A IF/BB Receiver and HP 3793B Diff Phase Detector modules in combined chassis
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Rackmount Chassis
    Power Requirements:
    220/240-1AT or 100/120-3AT, 48-66 Hz, 160 VA max
    Application / Use Case:
    Microwave link analysis, Satcom, IF/BB signal testing
    Rear Connectors:
    X-Y Recorder (5-pin DIN), D-Sub Normaliser, BNC ports
    Subsystem 1:
    HP 3712A IF/BB Receiver
    Subsystem 2:
    HP 3793B Differential Phase Detector
    Front Panel Display:
    CRT oscilloscope display with graticule
    Frequency Display:
    Digital LED frequency readout (visible on front panel)
    Measurement Type:
    IF/Baseband signal analysis, differential phase detection
    Compatible With:
    HP Microwave Link Analyzer system, Satcom test setups
    Phase Functions:
    Phase Lock/Level, BB Frequency, Diff Phase Calibration
    Power Measurement:
    Baseband power meter on front panel (analog meter)
    Condition Notes:
    HP 3712A / 3793B IF/BB Receiver and Diff Phase Detector Microwave Link Analyzer. Inspected and in good used condition. Normal lab wear; CRT, controls, and rear connectors appear intact. Property ID tag on front.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $173.00
    Was: $350.00
  • Tau-Tron S5104 DS1/DS1C/DS2 Digital Transmission Test Set front panel — full view showing Transmitter and Receiver LED displays, Error Inject, Measurement Time, and Receiver Input sections Tau-Tron S5104 front panel close-up — Transmitter Out section (DSX1/DSX1C/DS2H/DSX2), Error Inject section (Freq/BIT/BPV/AMPL), power-on red LED illuminated

    Tau-Tron S5104 DS1/DS1C/DS2 Digital Transmission Test Set Option 03 GPIB

    Tau-Tron

    $200.00
    Was: $400.00
    Tau-Tron S5104 DS1/DS1C/DS2 Digital Transmission Test Set Option 03 GPIBBenchtop test instrument for DS1, DS1C, and DS2 digital transmission line testing. Measures bit error rate, bipolar violations,...
    39757
    SKU:
    39757
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    25.00 LBS
    Brand:
    Tau-Tron
    Model:
    S5104
    MPN:
    S5104
    Type:
    Digital Transmission Test Set
    SKU:
    39757
    Option:
    Option 03
    Serial Number (Internal):
    See internal fields
    Condition:
    Used – Powers On, Untested Further
    Seller Notes:
    Unit powers on. Includes GPIB and RS-232 interfaces.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop
    Manufacturer:
    Tau-Tron (A Unit of General Signal)
    Signal Standards Supported:
    DS1, DS1C, DS2
    Interface Type:
    DS1, DS1C, DS2, NRZ
    Remote Interface:
    GPIB (IEEE-488), RS-232
    Connector Types:
    BNC, DB-25 (RS-232), GPIB
    Transmitter Outputs:
    DS1/1C/2, DS1 Bipolar, NRZ Data, NRZ Clock
    Receiver Inputs:
    DS1/1C/2, NRZ Data, NRZ Clock
    Monitor Outputs:
    PR Sync, M Sync, Bit Errors, BPV Errors
    Error Inject:
    Freq, BIT, ERR Free, BPV, AMPL, INT, EXT
    Measurements:
    BIT, BPV, Jitter, Frame, Status, Recall
    Measurement Time Modes:
    Untimed, Interval, Elapsed, Single, Repeat, Stop, Set, Time, Date
    Receiver Input Patterns:
    PRBS, UNFRAME, Frame, Fixed, Live, CH1-CH4
    Programmable Fixed Word:
    Yes — front-panel DIP switch programmable
    X Bit Inject/Out:
    DS1C/DS2 X Bit Inject and X Bit Out
    Additional Inputs:
    Ext Clk In, Ext Err, Jitter In/Out
    Display Type:
    LED numeric displays (Transmitter and Receiver)
    Status Indicators:
    Loss, Detect, Signal LEDs
    Application:
    DS1/DS1C/DS2 BER testing, jitter measurement, error injection
    Condition Notes:
    Tau-Tron S5104 DS1/DS1C/DS2 Digital Transmission Test Set with Option 03. Inspected, good cosmetic condition. Powers on — Transmitter and Receiver displays active. Not tested further. GPIB and RS-232 ports intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Scientific Atlanta D-9110 PowerVu Digital Video Encoder – front panel view showing rack ears and status LEDs Scientific Atlanta logo close-up on front panel of D-9110 PowerVu encoder chassis

    Scientific Atlanta D-9110 PowerVu Digital Video Encoder MPEG2 w/ 5 Modules

    Scientific Atlanta

    $500.00
    Was: $1,000.00
    Scientific Atlanta D-9110 PowerVu Digital Video Encoder MPEG2 w/ 5 ModulesThe Scientific Atlanta D-9110 is a modular MPEG-2 digital video encoder chassis from the PowerVu product line, designed for...
    39701
    SKU:
    39701
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    39.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D-9110
    MPN:
    D-9110
    Type:
    Digital Video Encoder
    SKU:
    39701
    Product Line:
    PowerVu
    Encoding Standard:
    MPEG-2
    Form Factor:
    Rack Mount
    Number of Module Slots:
    5
    Included Module 1:
    D9787 MPEG2 Video Encoder
    Included Module 2:
    D9786 Advanced Video Input
    Included Module 3:
    D9785 VBI Processor
    Included Module 4:
    D9782 Audio Encoder
    Included Module 5:
    D9711 MSYNC Control
    Power Supply Model:
    D9709 (x2, redundant)
    Power Requirements:
    100-120V 1A / 230-200V 2A, 50-60Hz, 480W
    Fuse Rating:
    T 6.3A 250V
    Application:
    Satellite broadcast video encoding
    Connector Types:
    BNC, DB9, RJ45, XLR, terminal block
    Alarm Indicators:
    Power On, Major Alarm, Minor Alarm, Supply 1 Fail, Supply 2 Fail, Alarm Cut Off
    Certifications:
    UL Listed (12Y7), CE
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes 5 installed modules: D9787, D9786, D9785, D9782, D9711; two D9709 power supplies installed
    Condition Notes:
    Scientific Atlanta D-9110 PowerVu Digital Video Encoder inspected and in good condition. All 5 modules (D9787, D9786, D9785, D9782, D9711) and both D9709 power supplies installed. Normal cosmetic wear from prior rack use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • Scientific Atlanta D9261 SWIF distribution amplifier front panel with power, alarm, Mode A/B, and PLL lock indicators D9261 rear panel showing multiple F-type connector outputs and control switch

    Scientific Atlanta D9261 PowerVu SWIF Distribution Amplifier 1U Rackmount

    Scientific Atlanta

    $145.00
    Was: $300.00
    Scientific Atlanta D9261 PowerVu SWIF Distribution Amplifier 1U Rackmount 100-240VThe Scientific Atlanta D9261 is a 1U rackmount SWIF (Satellite Wide-band Intermediate Frequency) distribution...
    39699
    SKU:
    39699
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    13.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D9261
    MPN:
    D9261
    Type:
    SWIF Distribution Amplifier
    SKU:
    39699
    Product Line:
    PowerVu
    Power Requirements:
    100-240V AC, 47-63 Hz, 1.0/0.5A auto-ranging
    Fuse Rating:
    T 2A 250V
    Form Factor:
    1U Rackmount
    Front Panel Indicators:
    Power, Alarm, Mode A, Mode B, PLL Lock A, PLL Lock B
    Alarm Output:
    Rear terminal block with NC, C, NO contacts
    Control Modes:
    Local (LOC), Remote (REM), External (EXT)
    Connector Type:
    F-Type (multiple rear outputs)
    Country/Region of Manufacture:
    Canada
    Seller Notes:
    Unit only; no accessories included. Rack ears installed.
    Compatible With:
    Scientific Atlanta PowerVu headend systems
    Application:
    Satellite headend signal distribution, CATV, SMATV
    Condition Notes:
    Scientific Atlanta D9261 SWIF Distribution Amplifier inspected and in good used condition. Light surface wear on chassis; front panel indicators and F-type connectors intact. Rack ears installed. Ready for deployment.
    Dual-Path Operation:
    Mode A / Mode B with PLL lock monitoring
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $145.00
    Was: $300.00
  • Scientific Atlanta D-9110 PowerVu Digital Video Encoder – front panel view with status LEDs and rack ears Scientific Atlanta logo close-up on D-9110 PowerVu encoder chassis

    Scientific Atlanta D-9110 PowerVu MPEG2 Digital Video Encoder D9787 D9782 D9711

    Digital Atlanta

    $325.00
    Was: $650.00
    Scientific Atlanta D-9110 PowerVu MPEG2 Digital Video Encoder D9787 D9782 D97115U rackmount MPEG-2 digital video encoder used in broadcast, satellite, and cable TV headend applications. Encodes video...
    39638
    SKU:
    39638
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    36.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D-9110
    MPN:
    D-9110
    Type:
    MPEG2 Digital Video Encoder
    SKU:
    39638
    Product Line:
    PowerVu
    Video Encoder Module:
    Model D9787 (MPEG2 Video Encoder)
    Audio Encoder Module:
    Model D9782 (Audio Encoder)
    MSync Control Module:
    Model D9711 (MSync Control)
    Power Supply Module:
    Model D9709
    Encoding Standard:
    MPEG-2
    Application:
    Broadcast / Satellite / Cable TV Headend
    Form Factor:
    Rackmount, 5U Chassis
    Power Requirements:
    100-120V 4A / 220-240V 3A, 50-60Hz
    Fuse Rating:
    T 6.3A 125V / T 6.3A 250V
    Front Panel Indicators:
    Power On, Major Alarm, Minor Alarm, Supply 1 Fail, Supply 2 Fail, Alarm Cut Off
    Rear Connectors:
    BNC video, XLR/RCA audio, RJ45, DB9, IEC power inlets
    Seller Notes:
    Includes D9787 video, D9782 audio, D9711 MSync modules and D9709 power supply
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Scientific Atlanta D-9110 PowerVu MPEG2 Digital Video Encoder inspected and in good condition. D9787, D9782, and D9711 modules all installed. Normal wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • Scientific Atlanta D-9110 PowerVu Digital Video Encoder front panel view with status LEDs and rack mount ears Close-up of D-9110 front panel status indicators: Power On, Major Alarm, Minor Alarm, Supply 1 Fail, Supply 2 Fail, Alarm Cut Off LEDs

    Scientific Atlanta D-9110 PowerVu Digital Video Encoder D9787 D9786 D9782 D9711

    Scientific Atlanta

    $300.00
    Was: $600.00
    Scientific Atlanta D-9110 PowerVu Digital Video Encoder D9787 D9786 D9782 D9711Rackmount digital video encoder for satellite television headend applications. Encodes MPEG-2 video streams and manages...
    39635
    SKU:
    39635
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    50.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D-9110
    MPN:
    D-9110
    Type:
    Digital Video Encoder
    SKU:
    39635
    Product Line:
    PowerVu
    Included Module 1:
    D9787 MPEG-2 Video Encoder
    Included Module 2:
    D9786 Advanced Video Input
    Included Module 3:
    D9782 Audio Encoder
    Included Module 4:
    D9711 MSYNC Control
    Power Supply Model:
    D9709 (dual redundant power supplies)
    Video Standard:
    MPEG-2
    Form Factor:
    Rackmount
    Power Requirements:
    100-120V / 220-240V AC, 50-60Hz
    Current Rating:
    6.3A @ 250V
    Certifications:
    UL Listed Professional Video Equipment, CE
    Seller Notes:
    Includes D9787, D9786, D9782, D9711 plug-in modules and D9709 power supply
    Application:
    Satellite television headend encoding
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected, Not Bench-Tested
    Condition Notes:
    Scientific Atlanta D-9110 PowerVu Digital Video Encoder. Inspected, in good physical condition. Not powered on or tested at our facility. All four plug-in modules (D9787, D9786, D9782, D9711) and D9709 power supply present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • Scientific Atlanta D9223 PowerVu Commercial Digital Satellite Receiver – front panel and rack ears, 2U chassis, angled view Scientific Atlanta D9223 front panel close-up showing Scientific Atlanta logo, STANDBY, CHAN down, and CHAN up buttons

    Scientific Atlanta D9223 PowerVu C/Ku Band Commercial Digital Satellite Receiver

    Scientific Atlanta

    $119.00
    Was: $250.00
    Scientific Atlanta D9223 PowerVu C/Ku Band Commercial Digital Satellite Receiver 2UThe Scientific Atlanta D9223 is a 2U rackmount commercial digital satellite receiver from Scientific Atlanta's...
    39587
    SKU:
    39587
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D9223
    MPN:
    D9223 V22THDSXXXX 803-200
    Secondary Model:
    803-200
    Type:
    Commercial Digital Satellite Receiver
    Product Line:
    PowerVu
    SKU:
    39587
    Seller Notes:
    Unit only, no accessories. Untested, sold as-is for parts or repair.
    Country/Region of Manufacture:
    Canada
    Form Factor:
    2U Rackmount
    Power Requirements:
    100-240V AC, 50-60Hz, 1.4A Max
    LNB Power Output:
    13V/19V switchable, 450mA Max
    RF Input:
    BNC (RF IN), SWIF IN
    Video Output:
    BNC Video, BNC Monitor
    Audio Output:
    Balanced Audio 1 & 2 (stereo), RCA Ch1/Ch2
    Data Interface:
    DB-9 serial (High Speed Data), AGC output
    Relay Output:
    RC8/AUTH relay contacts (terminal block)
    Expansion Port:
    Rear expansion connector
    Satellite Band:
    C-band and Ku-band selectable
    FEC Modes:
    Selectable via front panel
    Authorization ID:
    UA: 1789191-2
    Cat. No.:
    D9223 V22THDSXXXX 803-200
    Certifications:
    CSA NRTL/C LR 63109
    Compatible With:
    PowerVu satellite networks, C/Ku-band LNBF
    Application:
    Commercial broadcast satellite reception, cable headend
    Condition Notes:
    Scientific Atlanta D9223 PowerVu commercial digital satellite receiver. Sold as-is for parts or repair. Has not been tested and is not guaranteed functional. Unit only; no accessories included.
    Front Panel Controls:
    Keypad for channel/parameter selection, numeric display
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $119.00
    Was: $250.00
  • Matrix Systems Corporation 12924/13021 Programmable Wire Switching System – front 3/4 view showing rackmount chassis with relay card display panels and side handle Matrix Systems 12924/13021 model label closeup showing Model No. 12924/13021 and Matrix Systems S/N 137456

    Matrix Systems 12924/13021 Programmable Quad 5x10x2 Wire Switching System 4204

    Matrix Systems Corp

    $475.00
    Was: $950.00
    Matrix Systems 12924/13021 Programmable Quad 5x10x2 Wire Switching System 4204The Matrix Systems Corporation 12924/13021 is a programmable quad wire switching system housed in a 4U rackmount...
    39586
    SKU:
    39586
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    30.00 LBS
    Brand:
    Matrix Systems Corporation
    Model:
    12924/13021
    MPN:
    12924/13021
    Secondary Model:
    4204
    Type:
    Programmable Wire Switching Matrix System
    SKU:
    39586
    Condition:
    Used – Inspected and in Good Condition
    Form Factor:
    Rackmount, 4U
    Switching Configuration:
    Quad 5x10x2 (four independent 5-throw, 2-wire sections)
    Relay Card Model:
    4204 (Model 4204, MFG 07/99)
    Relay Card Part Number:
    367-4204-01
    Number of Relay Cards:
    Multiple 4204 dual 5-throw 2-wire relay cards installed
    Relay Type:
    Dual 5-throw 2-wire relay with status indicators
    Front Panel Indicators:
    Addresser, Addressed, Addressee LEDs; +24V, +5V, -5V, PS1, PS2 status LEDs
    Rear Connectors:
    2x Centronics-style (J2A, J3A), IEC AC inlet (J1A), 60x RJ-type jacks (J1–J60)
    Power Input Connector:
    IEC C14 (J1A)
    Power Rating:
    85–265 VAC, 5.5A Max
    Control Interface:
    Parallel (Centronics) — J2A, J3A
    Signal Connectors:
    60 RJ-type jacks (J1–J60) on rear panel
    Seller Notes:
    Mainframe chassis with multiple Model 4204 dual 5-throw 2-wire relay cards installed
    Country/Region of Manufacture:
    United States
    Application:
    Automated test, signal routing, relay switching matrix
    Programmable:
    Yes
    Condition Notes:
    Matrix Systems 12924/13021 Quad 5x10x2 Wire Switching System. Inspected and in good condition. Normal cosmetic wear. All 4204 relay cards present. Connectors appear clean and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $475.00
    Was: $950.00
  • Scientific Atlanta D9380 PowerVu Digital Video Modulator – front panel 3U rackmount view showing LCD display, keypad, and Scientific Atlanta logo Scientific Atlanta D9380 PowerVu – left front panel detail showing Scientific Atlanta branding, IF Monitor BNC port, ALARM and MUTE LED indicators

    Scientific Atlanta D9380 PowerVu Digital Video Modulator QPSK 100-240V

    Scientific Atlanta

    $110.00
    Was: $225.00
    Scientific Atlanta D9380 PowerVu Digital Video Modulator QPSK 100-240VThe Scientific Atlanta D9380 is a rackmount PowerVu Digital Video Modulator designed for professional digital video distribution...
    39578
    SKU:
    39578
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    21.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    D9380
    MPN:
    523136
    Secondary Model:
    PowerVu
    Type:
    Digital Video Modulator
    SKU:
    39578
    Modulation Type:
    QPSK
    Assembly – QPSK Modulator:
    ASSY 521522
    Assembly – Encoder:
    ASSY 523446
    Assembly – Interface:
    ASSY 521533
    Assembly – Front Panel Logic:
    ASSY 521599
    Power Input:
    100–240V AC, 47–63 Hz, 1.5A Max
    Fuse:
    Type T (Slow Blow), 250VAC, 2.0A
    IF Monitor Output:
    -20 dBm Typical (BNC)
    Rear Interfaces:
    BNC (I/Q Input/Output), DB-15 SABUS, Ethernet, SWIF
    Front Panel:
    LCD display, numeric keypad, 5 soft-key buttons
    Front Panel Indicators:
    ALARM LED, MUTE LED, IF Monitor BNC
    Form Factor:
    Rackmount, 3U
    Condition:
    Used – Powers On; Unable to Test Further
    Seller Notes:
    Includes QPSK modulator, encoder, and interface assemblies as described
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Norcross, GA 30093, US (Network Systems Group)
    Condition Notes:
    Scientific Atlanta D9380 PowerVu Digital Video Modulator powers on and LCD/indicators light up. Unable to test further. Shows normal rack wear. Sold as-is beyond power-on confirmation. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • HP 18177A V.35 DTE/DCE Interface Panel front view showing DTE and DCE signal LEDs, circuit description table, and dual 34-pin V.35 connectors HP 18177A V.35 Interface Panel rear/side view showing overall module housing and HP 18177A V.35 label

    HP 18177A V.35 DTE/DCE Interface Panel for HP 4951C Protocol Analyzer

    HP

    $60.00
    Was: $125.00
    HP 18177A V.35 DTE/DCE Interface Panel for HP 4951C Protocol Analyzer The HP 18177A is a V.35 DTE/DCE interface panel designed specifically for use with the Hewlett-Packard 4951C Protocol Analyzer...
    39573
    SKU:
    39573
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    HP
    Model:
    18177A
    MPN:
    18177A
    Type:
    V.35 DTE/DCE Interface Panel / Protocol Analyzer Pod
    SKU:
    39573
    Compatible With:
    HP 4951C Protocol Analyzer
    Interface Standard:
    V.35
    Interface Type:
    DTE/DCE
    Signal Circuits:
    DTE, DCE, SCE, SCT, SCR, RS, DTR, CS, DSR, CD
    CCITT Circuits:
    103, 104, 113, 114, 115, 105, 108/2, 106, 107, 109
    Connector Type:
    34-pin Winchester (V.35 standard)
    Form Factor:
    External Pod / Panel Module
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Panel only; no cables included. For use with HP 4951C Protocol Analyzer.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    HP 18177A V.35 DTE/DCE Interface Panel. Inspected and in good used condition. Pulled from a working environment. Housing shows light wear; LED indicators and V.35 connectors appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • General Instrument CLI Magnitude MPEG Encoder 410111-01 — three-quarter front view of full rackmount chassis with encoder cards installed, shown on pallet General Instrument CLI Magnitude MPEG Encoder — left-side panel showing Video Compressor module with indicator labels: Analog, PAL, Normal, Composite, Serial D1, Line Lock, Field Lock, Field Filter Alarm, Power On, On-Line, Backup, Transmit

    General Instrument CLI Magnitude MPEG Encoder 410111-01 100-240V NTSC PAL

    General Instrument

    $575.00
    Was: $1,200.00
    General Instrument CLI Magnitude MPEG Encoder 410111-01 100-240V NTSC PALThe General Instrument CLI Magnitude Compression Systems MPEG Encoder, part number 410111-01, is a large rackmount multi-card...
    39498
    SKU:
    39498
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    140.00 LBS
    Brand:
    General Instrument
    Model:
    410111-01
    MPN:
    410111-01
    Secondary Model:
    410444-01
    Type:
    MPEG Video Encoder Chassis
    SKU:
    39498
    Condition:
    Used – Inspected and Appears in Good Condition
    Series:
    Magnitude Compression Systems
    Manufacturer Division:
    CLI (Cable Television Laboratories Inc. / GI)
    Assembly Number:
    410111-01
    Serial Number (Unit):
    2274
    Manufacture Date:
    September 1997
    Power Requirements:
    AC 100/240V, 12-6 Amps, 50-60 Hz
    Wiring Configuration:
    Wired for 120VAC only (per label warning)
    Certifications:
    UL Listed (95AT)
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rackmount Chassis (large multi-slot card cage)
    Video Standard:
    NTSC / PAL / Composite / Serial D1
    Signal Indicators:
    Analog, PAL, Normal, Composite, Serial D1, Line Lock, Field Lock, Field Filter Alarm
    Status Indicators:
    Power On, On-Line, Backup, Transmit
    Encoder Card:
    CLI Video Encoder M1, P/N 410444-01, Rev A
    Channel Configuration:
    Multi-channel; Chan 2 visible with Abort/Reset controls
    Front Panel Connectors:
    Dual DB25 (Monitor), DB9 (Test) on Chan 2 module
    Rear Connectors:
    BNC video outputs, DB connectors, power harness
    Power Supply:
    Internal power supply unit with multi-rail outputs (+V, +15V, -15V, -5.2V visible)
    Compliance:
    DVB (Digital Video Broadcasting) compliant (per label)
    Application:
    Broadcast headend, cable TV, satellite video encoding
    Seller Notes:
    Chassis with multiple encoder/compressor cards installed. Separate power supply unit included.
    Condition Notes:
    General Instrument CLI Magnitude MPEG Encoder 410111-01 inspected, good used condition. Typical wear on exterior panels. Cards, backplane, and power harness appear intact. Unit wired for 120VAC only per label. Photos available.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $575.00
    Was: $1,200.00