Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Kaiser Marquart TFX 5513/5514-2 Burn-In Load Bank Fixture 400Hz 1200Hz 800W
Kaiser Marquardt
$325.00Was: $650.00Kaiser Marquart TFX 5513/5514-2 Burn-In Load Bank Fixture 400Hz 1200Hz 800WRackmount burn-in load bank fixture for aerospace and military electronics testing. Provides 800W total load capacity across...36419- SKU:
- 36419
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 62.00 LBS
- Brand:
- Kaiser Marquart
- Model:
- TFX 5513/5514-2
- MPN:
- TFX 5513/5514-2
- Type:
- Burn-In Load Bank Fixture
- SKU:
- 36419
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes multi-conductor harness cables with mil-spec circular connectors
- Form Factor:
- Rackmount / Benchtop Enclosure
- Input Frequency:
- 400 Hz and 1200 Hz (independent inputs)
- Input Phase:
- Single Phase or Three Phase
- Fan Voltage:
- 120V AC
- Number of Load Resistors:
- 4
- Load Resistor Rating:
- 200 Watts, 50 Ohms each
- Total Load Capacity:
- 800W (0.8 kW)
- Output Configuration:
- Monitored outputs: Units A, B, C, D — T/R, BUS, FIELD
- Input Connectors:
- Banana jacks (A, B, C, N terminals per frequency)
- Output Connectors:
- Banana jacks — T/R, BUS, FIELD per unit (A–D)
- Harness Connectors:
- Mil-spec multi-pin circular connectors (approx. 19-pin)
- Controls:
- Toggle switches: FAN ON/OFF, 1200Hz ON/OFF, 400Hz ON/OFF
- Calibration:
- Calibration Not Required (labeled on unit)
- Application:
- Aerospace / military electronics burn-in and load testing
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Kaiser Marquart TFX 5513/5514-2 Burn-In Load Bank Fixture. Tested — passes all input signals to output connectors. Good used condition; exterior shows scuffs, staining, and surface rust on bottom rail. Cable harness with mil-spec connectors included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$325.00Was: $650.00 -
Electro Products PSR-500-55 Regulated DC Power Supply 0-55V 10A 117VAC
Electro
$150.00Was: $300.00Electro Products PSR-500-55 Regulated DC Power Supply 0-55V 10A 117VACThe Electro Products Laboratories PSR-500-55 is a linear regulated DC power supply providing a continuously variable output of 0...36417- SKU:
- 36417
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 58.00 LBS
- Brand:
- Electro Products Laboratories
- Model:
- PSR-500-55
- MPN:
- PSR-500-55
- Type:
- Regulated DC Power Supply
- SKU:
- 36417
- Output Voltage:
- 0-55 VDC (variable)
- Output Current:
- 0-10 Amps (max continuous)
- Input Voltage:
- 117 VAC
- Input Frequency:
- 60 Hz
- Number of Outputs:
- 1
- Voltage Regulation:
- Linear Regulated
- Form Factor:
- Benchtop
- Output Type:
- DC
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only; power cord attached. Tested for correct operation.
- Country/Region of Manufacture:
- United States
- Load Type:
- Resistive Load Only
- Output Circuit Breaker:
- Yes
- Front Panel Meters:
- Analog voltmeter and ammeter
- Condition Notes:
- Electro Products PSR-500-55 Regulated DC Power Supply. Tested for correct operation and in good working order. Shows age-related surface oxidation and light cosmetic wear on the enclosure. Both analog meters intact. Power cord attached.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Slaughter 727/103MP-3 Rackmount Insulation Tester Megohmmeter 115VAC
Slaughter
$300.00Was: $600.00Slaughter 727/103MP-3 Rackmount Insulation Tester Megohmmeter 115VACRackmount insulation resistance tester and megohmmeter designed to measure electrical insulation integrity in industrial and...36373- SKU:
- 36373
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 47.00 LBS
- Brand:
- Slaughter
- Model:
- 727/103MP-3
- MPN:
- 727/103MP-3.0NR
- Secondary Model:
- 103MP-3
- Type:
- Rackmount Insulation Resistance Tester / Megohmmeter
- SKU:
- 36373
- Form Factor:
- Rack Mount
- Power Requirements:
- 115VAC
- Display Type:
- LCD Alphanumeric Display
- Input Interface:
- Numeric keypad with function keys (F1–F4, RS, EN, CL)
- Control Modes:
- Remote / Local
- Output Warning:
- High Voltage — DANGER label on rear panel
- Manufacturer Parent Company:
- R.E. Phelon Co., Inc., Ardmore, Oklahoma U.S.A.
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no test leads or accessories visible in photos.
- Condition Notes:
- Slaughter 727/103MP-3 Rackmount Insulation Tester in good used condition. Pulled from a working environment where it was in use and functional. Inspected; shows normal wear. No test leads included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
TBLO Calibration Load Panel F817182-1 Rackmount OFR-Sync Load Select
TBLO
$100.00Was: $200.00TBLO Calibration Load Panel F817182-1 Rackmount OFR-Sync Load SelectRackmount calibration load panel used in telecom and industrial test environments. Provides load selection and pulse output control...36371- SKU:
- 36371
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- TBLO
- MPN:
- F817182-1
- Type:
- Calibration Load Panel
- SKU:
- 36371
- Assembly Number:
- F817182-1
- Form Factor:
- Rackmount
- Front Panel Sections:
- SEL Status, OFR-Sync, Load Select, Pulse Sel.
- Connectors:
- J44 (DB9), J7 (DB15), J45 (DB15) D-sub connectors
- Controls:
- Rotary Load Select switch; PRI/RED toggle switch
- Indicators:
- Color-coded banana jack terminals: A, B, A', B', GND
- Pulse Outputs:
- Pulse A and Pulse B with A/B/GND banana jacks
- Condition:
- Used – Inspected
- Seller Notes:
- Panel only; wiring harness and rear sub-assembly included as shown.
- Condition Notes:
- TBLO F817182-1 Calibration Load Panel inspected and in good used condition. Front panel clean, rear wiring harness intact, rear sub-assembly present. Light wear from prior use. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00 -
Elpac WRI 2721 Power Supply AC 95-250V 47-63Hz +5V 4A +12V 0.5A 27W DC Out
Elpac
$35.00Was: $70.00Elpac WRI 2721 Power Supply AC 95-250V 47-63Hz +5V 4A +12V 0.5A 27W DC OutDual-output switching power supply for industrial and telecom applications. Converts wide-range AC input to regulated +5V and...36354- SKU:
- 36354
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Elpac Power Systems
- Model:
- WRI 2721
- MPN:
- WRI 2721
- Type:
- Dual Output Switching Power Supply
- SKU:
- 36354
- Input Voltage:
- AC 95-250V
- Input Frequency:
- 47-63 Hz
- Input Current:
- 0.79A
- Output Power:
- 27W Max
- Output Voltage 1:
- +5V
- Output Current 1:
- 4A
- Output Voltage 2:
- +12V
- Output Current 2:
- 0.5A
- Number of Outputs:
- 2
- Output Connector:
- Multi-pin terminal block / pigtail leads
- Input Connector:
- IEC C14 AC inlet
- Safety Certifications:
- UL Listed, CSA, GS (TÃœV Rheinland), Class 2
- Revision:
- Rev. B
- Date Code:
- 0295 (February 1995)
- Form Factor:
- Open Frame / Chassis Mount
- Power Requirements:
- AC 95-250V, 47-63 Hz, 0.79A
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Elpac WRI 2721 power supply inspected and in good used condition. Chassis shows light wear. IEC inlet, terminal block, and output leads appear intact. No damage noted.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Heidenhain EXE 610 C Encoder Interpolation Box 263 383 01 Mask Aligner CNC
Heidenhain
$85.00Was: $175.00Heidenhain EXE 610 C Encoder Interpolation Box 263 383 01 Mask Aligner CNCThe Heidenhain EXE 610 C is an encoder interpolation (subdivision) electronics box used to process and multiply the...36353- SKU:
- 36353
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Heidenhain
- Model:
- EXE 610 C
- MPN:
- 263 383 01
- Type:
- Encoder Interpolation Box
- SKU:
- 36353
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a mask alignment system
- Country/Region of Manufacture:
- Germany
- Form Factor:
- Standalone Module / External Box
- Application / Use Case:
- Linear/rotary encoder signal interpolation, CNC, mask aligners
- Compatible With:
- Heidenhain linear and rotary encoders, mask alignment systems
- Interface / Connector Type:
- Circular multi-pin connector (both ends)
- Axis:
- Z Axis (label visible on unit)
- Condition Notes:
- Heidenhain EXE 610 C encoder interpolation box, Id.Nr. 263 383 01. Inspected, good used condition. Pulled from a working mask alignment system. Both connectors intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$85.00Was: $175.00 -
Homaco 19-84-T2SD*B Rack w/ Leviton Cat5 48-Port Patch Panels 59484-B48
Homarco
$275.00Was: $550.00Homaco 19-84-T2SD*B Rack w/ Leviton Cat5 48-Port Patch Panels 59484-B48 5G584-U48Open-frame 19-inch rackmount cable management system designed for organizing and terminating network patch panels...36311- SKU:
- 36311
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 151.00 LBS
- Brand:
- Homaco
- Model:
- 19-84-T2SD*B
- MPN:
- 19-84-T2SD*B
- SKU:
- 36311
- Type:
- Open-Frame Rackmount Cable Management Rack with Patch Panels
- Form Factor:
- Open Frame Rack / Freestanding
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes vertical organizer VO-84-T3FTE, 10x combo organizers HFM-19-2SRC, 1x Leviton blank panel 49254 BP4, 8x Leviton Cat5 48-port patch panels 59484-B48, 1x Leviton Cat5e GigaMax 48-port patch panel 5G584-U48
- Compatible With:
- Standard 19-inch rackmount equipment
- Included Components 1:
- Homaco DirectPath Vertical Organizer VO-84-T3FTE
- Included Components 2:
- 10x Homaco Combo Organizers HFM-19-2SRC
- Included Components 3:
- 1x Leviton Blank Panel 49254 BP4
- Included Components 4:
- 8x Leviton Power Sum Cat5 48-Port Patch Panel 59484-B48
- Included Components 5:
- 1x Leviton Cat5e GigaMax Universal 48-Port Patch Panel 5G584-U48
- Number of Ports (Patch Panels):
- 432 total (9 panels x 48 ports)
- Cable Category:
- Cat5 / Cat5e
- Connector Type:
- RJ-45
- Wiring Standard:
- T568B
- Standards Compliance:
- Meets FCC Part 68; UL Listed (Comm. Circuit Acc.)
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Homaco 19-84-T2SD*B DirectPath rack inspected and in good used condition. Frame intact, all listed patch panels and organizer components present. Leviton patch panels show light wear from prior installation. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Homaco 19-84-T2SD-B DirectPath Open Frame Cable Rack VO-84-T6FTE VO-84-T3FTE
Homarco
$225.00Was: $500.00Homaco 19-84-T2SD-B DirectPath Open Frame Cable Rack VO-84-T6FTE VO-84-T3FTEThe Homaco 19-84-T2SD-B is an 84-inch open-frame cable rack from Homaco's DirectPath cable management line. Designed for...36310- SKU:
- 36310
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 100.00 LBS
- Brand:
- Homaco
- Model:
- 19-84-T2SD-B
- MPN:
- 19-84-T2SD*B
- Type:
- Open Frame Cable Rack
- SKU:
- 36310
- Product Line:
- DirectPath
- Included Accessory 1:
- VO-84-T6FTE Vertical Cable Organizer
- Included Accessory 2:
- VO-84-T3FTE Vertical Cable Organizer
- Seller Notes:
- Includes VO-84-T6FTE and VO-84-T3FTE vertical cable organizers
- Form Factor:
- Open Frame / Freestanding
- Frame Height:
- 84 inches
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected and in Good Condition
- Compatible With:
- Standard 19-inch rackmount equipment
- Patent:
- U.S. Patent 5,586,012
- Condition Notes:
- Homaco 19-84-T2SD-B DirectPath open-frame cable rack inspected and in good used condition. Frame is structurally sound with light cosmetic wear. Includes VO-84-T6FTE and VO-84-T3FTE vertical organizers.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$225.00Was: $500.00 -
Precision Fabrication Technologies PFT 19" Open Frame Server Rackmount Stand
Precision Fabrication Technologies
$200.00Was: $400.00Precision Fabrication Technologies PFT 19" Open Frame Server Rackmount Stand 2-PostThis is a 19-inch open frame 2-post server rack stand manufactured by Precision Fabrication Technologies, Inc. (PFT)...36307- SKU:
- 36307
- Availability:
- Usually ships within 1-2 business days via palletized freight — please contact us for a shipping quote before ordering.
- Weight:
- 100.00 LBS
- Brand:
- Precision Fabrication Technologies
- Model:
- PFT 19" Open Frame Rackmount Stand
- MPN:
- PFT
- Type:
- 2-Post Open Frame Server Rack Stand
- SKU:
- 36307
- Form Factor:
- 2-Post Open Frame Floor Standing Rack
- Rack Size:
- 19 inch (EIA standard)
- Mount Type:
- 2-Post Open Frame
- Cable Management:
- Integrated cable management hooks on side rails
- Base Type:
- Floor-mount flat base with bolt-down holes
- Color:
- Black
- Condition:
- Used – Inspected, Good Condition
- Seller Notes:
- Unit only — no additional accessories. Freight shipping required.
- Country/Region of Manufacture:
- United States
- Shipping Method:
- Palletized Freight — contact seller for quote
- Condition Notes:
- Precision Fabrication Technologies PFT 19" Open Frame Rack Stand. Inspected, good condition. Frame is straight and solid; cable hooks present. Normal scuffs from prior use. Freight shipping required — contact us for quote.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Tekniche 6004T Genesis 6000 Series 16-Slot Server Chassis 19" Rackmount 230VAC
Tekniche
$272.00Was: $500.00Tekniche 6004T Genesis 6000 Series 16-Slot Server Chassis 19" Rackmount 230VAC A 19-inch rackmount server chassis designed to house up to 16 Tekniche Genesis 6000 Series server modules. This is a...36250- SKU:
- 36250
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 35.00 LBS
- Brand:
- Tekniche
- Model:
- 6004T
- MPN:
- 6004T
- Type:
- 16-Slot Rackmount Server Chassis / Card Cage
- SKU:
- 36250
- Series:
- Genesis 6000
- Number of Slots:
- 16
- Form Factor:
- 19" Rackmount
- Power Requirements:
- 230VAC, Dual Inputs (2x rear)
- Monitor Output:
- DB-9 (9-Pin), 1x rear (Monitor Out)
- Cooling:
- 4x Rear Cooling Fans
- Certifications:
- CE
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Chassis only; no server modules included. Pulled from a working environment.
- Country/Region of Manufacture:
- United Kingdom
- Compatible With:
- Tekniche Genesis 6000 Series server modules
- Condition Notes:
- Tekniche 6004T Genesis 6000 16-slot rackmount chassis. Inspected, in good condition. Pulled from a working environment where it was in use and functional. Shows normal wear. Chassis only — no modules included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$272.00Was: $500.00 -
Hybricon 078-360 Reference Board Test Module VME Chassis Card Cage Assembly
Hybricon
$149.00Was: $300.00Hybricon 078-360 Reference Board Test Module VME Chassis Card Cage AssemblyThe Hybricon 078-360 is a reference board and test module housed in a compact benchtop card cage chassis. It features an...36237- SKU:
- 36237
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 18.00 LBS
- Brand:
- Hybricon
- Model:
- 078-360
- MPN:
- 078-360
- Type:
- Reference Board / Test Module
- SKU:
- 36237
- Form Factor:
- Benchtop Chassis / Card Cage
- Interface Type:
- VME / Internal RF (SMA)
- Connector Type:
- SMA, DB-style edge connectors
- Condition:
- Used – Inspected, Not Bench-Tested
- Seller Notes:
- Includes attached SMA RF coaxial pigtail cable
- Application / Use Case:
- VME-bus reference and test, RF/embedded system dev
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Hybricon 078-360 Reference Board Test Module. Visually inspected, good cosmetic condition. Internal RF assembly and SMA cable intact. Not bench-tested; sold as-inspected with no functional guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$149.00Was: $300.00 -
Tau-Tron STX-1101 Bit Error Rate Transmitter GPIB RS-232 120VA 47-440Hz BERT
Tau-Tron
$300.00Was: $600.00Tau-Tron STX-1101 Bit Error Rate Transmitter GPIB RS-232 120VA 47-440Hz BERTBenchtop bit error rate transmitter used for testing and measuring digital transmission quality in telecom and data...36234- SKU:
- 36234
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 39.00 LBS
- Brand:
- Tau-Tron
- Model:
- STX-1101
- MPN:
- STX-1101
- Type:
- Bit Error Rate Transmitter (BERT)
- SKU:
- 36234
- Parent Company:
- General Signal
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Power Requirements:
- 120 VA / 75 W Max, 47-440 Hz AC
- AC Input Voltage (115V):
- 90-132 VAC
- AC Input Voltage (230V):
- 180-264 VAC
- Fuse (115V):
- 1-1/2 Amp Slow-Blow
- Fuse (230V):
- 3/4 Amp Slow-Blow
- Input Frequency Range:
- 47-440 Hz
- Interface Type:
- GPIB, RS-232
- Control Modes:
- Local, Remote, Return to Local
- Data Patterns:
- 2^6-1, 2^9-1, 11110000 (selectable)
- Error Inject:
- Internal and External; selectable error rate, single
- Sync Outputs:
- Pattern, Clock (TTL), Data (50 Ohm), Term Both in 50 Ohm
- Clock Features:
- Clock Loss indicator; Output and Input (50 Ohm term)
- Data Output:
- Amplitude and Baseline Offset adjustable; Preset/Variable
- Data Inhibit:
- TTL
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories observed. Please view photos.
- Condition Notes:
- Tau-Tron STX-1101 Bit Error Rate Transmitter in good used condition. Pulled from a working environment where it was in use and functional. Inspected; shows normal lab wear. Front panel, BNC connectors, GPIB and RS-232 ports intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
Tau-Tron SRX-1101 Bit Error Rate Receiver GPIB RS-232 Phase Clock Adjust BERT
Tau-Tron/General Signal
$250.00Was: $500.00Tau-Tron SRX-1101 Bit Error Rate Receiver GPIB RS-232 Phase Clock Adjust BERTThe Tau-Tron SRX-1101 is a benchtop Bit Error Rate (BER) receiver designed for testing digital transmission systems...36233- SKU:
- 36233
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 39.00 LBS
- Brand:
- Tau-Tron
- Model:
- SRX-1101
- MPN:
- SRX-1101
- Type:
- Bit Error Rate Receiver (BERT)
- SKU:
- 36233
- Condition:
- Used – Pulled from Working Environment
- Manufacturer / Parent Company:
- General Signal
- Form Factor:
- Benchtop
- Power Requirements:
- 90–132 VAC or 180–264 VAC, 47–440 Hz, 190 VA / 120W Max
- Interface Type:
- GPIB, RS-232
- Connector Type:
- GPIB (IEEE-488), RS-232 (DB-25), BNC
- Measurement Type:
- Bit Error Rate (BER)
- Clock Phase Adjust Range:
- 0–3400
- Error Counter Display:
- LED 7-segment, scientific notation (E-00)
- Data Inputs:
- DATA 1.7V P-P Max 50Ω, CLOCK 1V P-P 50Ω
- Outputs:
- Data Monitor 500mV P-P 50Ω, Clock Sync 500mV P-P 50Ω, Pattern Sync TTL, Count Inhibit TTL
- Synchronization Modes:
- Auto, Override, Sync Mode, In Sync, Sync Loss, Reset
- Data Pattern:
- 2^-1, 2^n-1 selectable
- Control Modes:
- Local, Remote, Return to Local
- Fuse (115V):
- 2-1/2 AMP Slow Blow
- Fuse (230V):
- 1-1/4 AMP Slow Blow
- Country/Region of Manufacture:
- United States
- Made In:
- Westford, MA, USA
- Seller Notes:
- Unit only; pulled from a working environment. No accessories or manual included.
- Condition Notes:
- Tau-Tron SRX-1101 Bit Error Rate Receiver in good used condition. Pulled from a working environment where it was in use and functional. Normal wear. Front panel and connectors intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
HP 8080A Main Frame Chassis with 8092A, 8093A, 15400A & 15401A Plug-Ins - As Is
HP
$167.00Was: $300.00Main Frame Chassis with 8092A, 8093A, 15400A & 15401A Plug-Ins - As Is Has the following modules installed: HP 8093A AMP - 1GHZ HP 8092A DELAY GENERATOR / FREQUENCY DRIVER HP 15401A HP 15400A ...36067- SKU:
- 36067
- Weight:
- 24.00 LBS
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$167.00Was: $300.00 -
HP 8080A Mainframe 8091A 8092A 15402A 8093A x2 15401A Plug-In System
HP
$600.00Was: $1,200.00HP 8080A Mainframe 8091A 8092A 15402A 8093A x2 15401A Plug-In SystemThe Hewlett-Packard 8080A is a modular pulse generator mainframe designed to house a family of interchangeable plug-in modules that...36061- SKU:
- 36061
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 28.00 LBS
- Brand:
- HP
- Model:
- 8080A
- MPN:
- 8080A
- Type:
- Pulse Generator Mainframe with Plug-In Modules
- SKU:
- 36061
- Condition:
- Used – Powers On, Not Fully Tested
- Included Plug-In 1:
- HP 8091A Rate Generator, 1 GHz
- Included Plug-In 2:
- HP 8092A Delay Generator / Freq. Divider
- Included Plug-In 3:
- HP 15402A Channel Module
- Included Plug-In 4:
- HP 8093A 1GHz Amplitude Plug-In (x2)
- Included Plug-In 5:
- HP 15401A Output Plug-In
- Number of Plug-In Slots Populated:
- 6
- Frequency Range:
- Up to 1 GHz (8091A Rate Generator)
- Form Factor:
- Benchtop Mainframe
- Power Requirements:
- Line +10% -22%, 48–440 Hz (rear label)
- Dimensions:
- 18" x 17" x 5"
- Connector Type:
- BNC
- Display Type:
- LED Numeric (Channel B Delay readout)
- Compatible With:
- HP 8080-series plug-in modules
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes 8091A, 8092A, 15402A, 8093A (x2), and 15401A plug-ins installed in mainframe.
- Condition Notes:
- HP 8080A Pulse Generator Mainframe powers on and panel illuminates. Cannot test further at our facility. "NOT CALIBRATED" label present. All 6 plug-ins installed. Sold as-is beyond power-on. Contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Microdyne 1400-MR Telemetry Receiver 1451-D 1420-I 1411-V Plug-Ins 120VAC
Microdyne
$500.00Was: $2,500.00Microdyne 1400-MR Telemetry Receiver 1451-D 1420-I 1411-V Plug-Ins 120VACRack-mount telemetry receiver chassis from Microdyne designed for PCM/FM/IRIG signal reception in aerospace and defense...36045- SKU:
- 36045
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 55.00 LBS
- Brand:
- Microdyne
- Model:
- 1400-MR
- MPN:
- 105-316-01
- Type:
- Telemetry Receiver
- SKU:
- 36045
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes 1451-D, 1420-I, 1411-V plug-ins. Special power cable not included.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount
- Power Requirements:
- 120 VAC, 50–400 Hz
- Plug-In Module 1:
- 1451-D PM Demodulator
- Plug-In Module 2:
- 1420-I IF Filter Amplifier (1420-I Series)
- Plug-In Module 3:
- 1411-VT(70) RF Tuner, 50–90 MHz
- RF Tuner Frequency Range:
- 50–90 MHz
- Demodulator Type:
- PM Demodulator
- IF Filter Amplifier Bandwidth:
- 100, 300 kHz, N/U, N/U
- Configuration:
- RX6 G1-2
- Interface / Output:
- RS-232, BNC, D-Sub, 4-pin power connector
- Compatible With:
- Microdyne 1400-series telemetry receiver chassis
- Application:
- PCM/FM/IRIG telemetry reception, aerospace, defense
- Condition Notes:
- Microdyne 1400-MR Telemetry Receiver sold as-is for parts/repair. Powers on and lights up but requires a special power cable (not included); full function unconfirmed. Includes 1451-D, 1420-I, 1411-V plug-ins.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$500.00Was: $2,500.00 -
PHC-412J Regulated 13.8VDC Power Supply 120VAC 56W 2A Cigarette Lighter Output
Generic
$35.00Was: $70.00PHC-412J Regulated 13.8VDC Power Supply 120VAC 56W 2A Cigarette Lighter OutputLinear regulated DC power supply that converts 120VAC input to 13.8VDC output. Designed for stationary bench or rack...36041- SKU:
- 36041
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Unbranded
- Model:
- PHC-412J
- MPN:
- PHC-412J
- Type:
- Regulated DC Power Supply
- SKU:
- 36041
- Input Voltage:
- 120VAC, 60Hz
- Input Power:
- 56W
- Output Voltage:
- 13.8VDC
- Max Current:
- 2A
- Surge Current:
- 4A
- Output Connectors:
- Cigarette lighter socket, binding posts (+ and -)
- Form Factor:
- Desktop / Benchtop
- Power Regulation:
- Linear Regulated
- Country/Region of Manufacture:
- China
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes attached DC barrel jack output cable. No other accessories.
- Condition Notes:
- This PHC-412J Regulated 13.8VDC Power Supply has been inspected and is in good used condition. Minor surface wear consistent with normal use. Attached DC barrel jack cable included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VAC
Avantek
$300.00Was: $600.00Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VACThis is a DC power supply designed for Avantek satellite ground station equipment. It converts 120V AC input to regulated DC...36036- SKU:
- 36036
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- Avantek
- Model:
- PS-110-004
- MPN:
- 310-037769-001
- Secondary Model:
- 310-037769-001 Rev B
- SKU:
- 36036
- Type:
- Satellite Power Supply
- Input Voltage:
- 120V AC
- Fuse Rating:
- 2A
- Output Type:
- DC
- Revision:
- Rev B
- AC Input Connector:
- Circular military-style (3-pin)
- DC Output Connector:
- J1 — circular multi-pin
- Included Accessories:
- Power cord with circular 3-pin connector
- Condition:
- Used – Inspected
- Form Factor:
- Benchtop / Panel-Mount
- Compatible With:
- Avantek satellite ground station equipment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes power cord with circular 3-pin connector. Inspected and in good condition.
- Condition Notes:
- Avantek PS-110-004 satellite power supply, P/N 310-037769-001 Rev B. Inspected and in good used condition. Light surface wear; connectors and fuse intact. Includes power cord.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
Varian VJC6767D8T7 Switch/Switch Control & VJC6767D5D Switch Control Rackmount
Varian
$100.00Was: $200.00Varian VJC6767D8T7 Switch/Switch Control & VJC6767D5D Switch Control RackmountSatcom switch control assembly from Varian's Microwave Equipment Division. This rackmount unit combines a switch control...36034- SKU:
- 36034
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Varian
- Model:
- VJC6767D8T7
- Secondary Model:
- VJC6767D5D
- MPN:
- 112022-04
- SKU:
- 36034
- Type:
- Satcom Switch / Switch Control
- Form Factor:
- Rackmount
- Manufacturer Division:
- Varian Microwave Equipment Division
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes Switch/Switch Control (VJC6767D8T7) and Switch Control (VJC6767D5D) as a rackmount assembly.
- Application:
- Satellite Communications (Satcom)
- Interface Type:
- Multi-pin circular connector (J1), coaxial (J2, J3), terminal block (TB1)
- Number of Ports / Connections:
- TB1 terminal block (6 positions), J1 circular, J2, J3 coaxial, J5 header
- Condition Notes:
- Varian VJC6767D8T7 / VJC6767D5D satcom switch control rackmount inspected and in good used condition. Pulled from a working environment. Surface scuffing typical of service use. Connectors intact. View photos; contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00 -
Artel R3050-840 Video Fiber Optic Receiver Module Card Satcom RF R3050
ARTEL
$90.00Was: $175.00Artel R3050-840 Video Fiber Optic Receiver Module Card Satcom RF R3050Fiber optic video receiver plug-in card module designed for use in Artel communications systems. This card receives video signals...36031- SKU:
- 36031
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Artel Communications Corporation
- Model:
- R3050-840
- MPN:
- R3050-840
- Secondary Model:
- R3050
- SKU:
- 36031
- Type:
- Fiber Optic Video Receiver Plug-In Card Module
- Form Factor:
- Plug-In Card / Module
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- TX# 1213 and RX# 1213 are a factory optimized pair
- Front Panel Indicators:
- RX Overload, RX Input, Video On LEDs; Test LED
- Front Panel Controls:
- Video Level Adjust pot; Video Level Off switch
- Connector Type:
- Gold-edge card connector; SMA-style RF/fiber connector
- Country/Region of Manufacture:
- United States
- Compatible With:
- Artel fiber optic video transmission systems
- Application:
- Fiber optic video signal reception and transmission
- Condition Notes:
- Artel R3050-840 fiber optic video receiver card. Inspected, good condition. Pulled from a working environment. TX# 1213 / RX# 1213 factory optimized pair. Normal wear. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$90.00Was: $175.00