Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Intel P8279-5 Display Driver Board 31-710011-001 — top side component view, full board length on anti-static foam Intel Display Driver Board 31-710011-001 — reverse angle top view showing IC layout including DIP chips and connectors

    Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 1976 Vintage PCB

    Intel

    $40.00
    Was: $80.00
    Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 1976 Vintage PCBThis is a vintage Intel Display Driver Board built around the Intel P8279-5 keyboard and display controller IC, dated 1976. The...
    34453
    SKU:
    34453
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Intel
    Model:
    P8279-5
    MPN:
    31-710011-001
    Secondary Model:
    31-710011-00
    Type:
    Display Driver Board / Keyboard-Display Controller PCB
    SKU:
    34453
    Chipset / Main IC:
    Intel P8279-5 (8279 Keyboard/Display Controller)
    Board Revision:
    Rev X1
    Date Code / Year:
    1976
    Assembly Number:
    01238
    Form Factor:
    Bare PCB / Card Module
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Board only; no chassis or enclosure included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 (1976) has been inspected and is in good condition. Board is intact, all ICs present. Normal aging for a 1976-era PCB. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Advance Power PPS1000/24 Type A200 DC power supply — rear panel view showing two multi-pin output connectors (QM.1, QM.2) and attached power cord Advance Power PPS1000/24 A200 multi-output DC power supply — right-side and rear quarter view showing cooling fan and warning label

    Advance Power PPS1000/24 Type A200 DC Power Supply 240V 50Hz Multi-Output

    Alphabet

    $100.00
    Was: $200.00
    Advance Power PPS1000/24 Type A200 DC Power Supply 240V 50Hz Multi-OutputThe Advance Power PPS1000/24 is a multi-output DC power supply combining switch-mode and linear power conversion in a single...
    34213
    SKU:
    34213
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    46.00 LBS
    Brand:
    Advance Power
    Model:
    PPS1000/24
    MPN:
    PPS1000/24
    Type:
    Multi-Output DC Power Supply
    Secondary Model:
    Type A200
    SKU:
    34213
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes two output connectors (QM.1 and QM.2) and power cord.
    Country/Region of Manufacture:
    United Kingdom
    Form Factor:
    Rackmount / Desktop Chassis
    Input Voltage:
    90 / 110 / 130 / 180 / 220 / 240V AC (jumper selectable)
    Input Frequency:
    50-60 Hz
    Input Current:
    4.4A / 2.2A RMS Max at 110/220V
    Fuse Rating:
    5 Amps HRC
    Output 1 (D/P1):
    +5V / 40A
    Output 2 (D/P2):
    +16V / 10A
    Output 3 (D/P3):
    -16V / 10A
    Output 4 (D/P4):
    +23V / 8A
    Linear DC Output (EST.):
    24V 10A; 30V unloaded (2 linear DC supplies)
    Max Total Power:
    200W (with adequate cooling, per data sheet)
    Number of Outputs:
    6 (4 switch-mode + 2 linear DC)
    Output Connector:
    Multi-pin connectors QM.1 and QM.2 (rear panel)
    Voltage Configuration:
    Jumper selectable: 90–240V AC nominal
    Programmable:
    No
    Reference / Revision:
    Ref A2.01.B/1.3
    Cooling:
    Rear-mounted fan (forced air)
    Condition Notes:
    Advance Power PPS1000/24 Type A200 DC power supply. Used, inspected, in good condition. Pulled from a working environment. Both output connectors (QM.1, QM.2) and power cord included. Typical light wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Stainless steel preformed coaxial cable 202544-001 with SMA-M connector and formed loop, full length side view Close-up of 202544-001 label and SMA-M male connector on stainless steel coaxial cable

    Stainless Steel Preformed Coaxial Cable SMA-M Connector 202544-001 ~5.5"

    Stainless Steel

    $20.00
    Was: $40.00
    Stainless Steel Preformed Coaxial Cable SMA-M Connector 202544-001 ~5.5"This is a preformed stainless steel coaxial cable assembly with an SMA-M (SMA male) connector, part number 202544-001. The...
    34181
    SKU:
    34181
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    202544-001
    MPN:
    202544-001
    Type:
    Preformed Coaxial Cable Assembly
    SKU:
    34181
    Connector Type:
    SMA-M (SMA Male)
    Cable Material:
    Stainless Steel
    Cable Style:
    Preformed / Semi-Rigid
    Cable Length:
    Approx. 5.5 inches
    Termination:
    SMA Male one end; formed loop/tip opposite end
    Application:
    RF, Microwave, Test Equipment
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Sold as pictured. Single preformed coaxial cable assembly.
    Condition Notes:
    Preformed stainless steel coaxial cable 202544-001 with SMA-M connector, ~5.5" long. Inspected and in good used condition. No kinks; SMA center pin intact. Light surface wear only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Preformed stainless steel coaxial cable 202543-001 with SMA-M connector and black tip end, full length side view Close-up of cable label showing part number 202543-001 and manufacturer code near black end cap

    Preformed Coaxial Cable SMA-M Connector Stainless Steel 5 Inch 202543-001

    Stainless Steel

    $18.00
    Was: $40.00
    Preformed Coaxial Cable SMA-M Connector Stainless Steel 5 Inch 202543-001Rigid preformed coaxial cable with SMA male connector on one end and open bare end on the other. Used for RF signal...
    34178
    SKU:
    34178
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    202543-001
    MPN:
    202543-001
    Type:
    Preformed Coaxial Cable
    SKU:
    34178
    Connector Type:
    SMA-M (SMA Male)
    Cable Length:
    Approx. 5 Inches
    Cable Construction:
    Preformed / Rigid
    Jacket / Body Material:
    Stainless Steel
    Connector End 1:
    SMA Male (SMA-M)
    Connector End 2:
    Open / Bare End (black tip)
    Cable Type:
    Coaxial (RF)
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Cable only; no accessories included.
    Condition Notes:
    Preformed stainless steel coaxial cable 202543-001 with SMA-M connector. Inspected and in good used condition. Stainless body is straight, SMA-M connector pin is clean and undamaged, black tip intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • Modutec ME DVV 100 U panel meter in original box with 20k ohm series resistor in bag and gold mounting gasket visible Modutec ME DVV 100 U DC voltmeter dial face showing 0-100V scale, viewed from above in open box

    Modutec ME DVV 100 U Panel Meter DC Voltmeter 0-100V 1.8x0.75 Slot 20k Ohm

    Modutec

    $22.00
    Was: $40.00
    Modutec ME DVV 100 U Panel Meter DC Voltmeter 0-100V 1.8x0.75 Slot 20k OhmAnalog DC panel voltmeter for measuring voltages from 0 to 100V DC. Mounts directly into standard 1.8 x 0.75 inch panel slots...
    33975
    SKU:
    33975
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Modutec
    Model:
    ME DVV 100 U
    MPN:
    916 069-001
    Type:
    Analog DC Panel Voltmeter
    SKU:
    33975
    Voltage Range:
    0-100V DC
    Full Scale Voltage:
    100V DC
    Movement Full Scale Current:
    4.7 mA
    Movement Full Scale Voltage:
    4.73V
    Movement Resistance:
    1003 ohm
    Series Scaling Resistor:
    20k ohm (included)
    Mounting Slot Dimensions:
    1.8 in x 0.75 in
    Depth Behind Panel:
    1.75 in
    Scale:
    DC Volts, 0-25-50-75-100
    Seller Notes:
    Includes 20k ohm series scaling resistor and mounting gasket
    Condition:
    New
    Country/Region of Manufacture:
    United States
    Form Factor:
    Panel Mount
    Condition Notes:
    Modutec ME DVV 100 U DC panel voltmeter, new old stock. Meter, 20k ohm resistor, and mounting gasket included and appear unused. Box shows shelf wear. May have been stored long-term or outside original packaging.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.00
    Was: $40.00
  • Modutec ME DVV 050 U DC panel meter shown with original box, 9.1k ohm series resistor, mounting bezel, and meter movement Modutec ME DVV 050 U analog DC panel meter front view showing 0–50 DC Volts scale and needle

    Modutec ME DVV 050 U DC Panel Meter 0-50V 1.8x0.75 Slot w/ 9.1k Resistor

    Modutec

    $11.10
    Was: $28.00
    Modutec ME DVV 050 U DC Panel Meter 0-50V 1.8x0.75 Slot w/ 9.1k Resistor The Modutec ME DVV 050 U is a compact analog DC panel voltmeter with a 0–50V full-scale range. It uses a moving-coil...
    33974
    SKU:
    33974
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Modutec
    Model:
    ME DVV 050 U
    MPN:
    ME DVV 050 U
    Secondary Model:
    916 069-001
    SKU:
    33974
    Type:
    Analog DC Panel Voltmeter
    Measurement Type:
    DC Voltage
    Voltage Range:
    0–50V DC
    Full Scale Current:
    ~5 mA
    Full Scale Voltage (movement only):
    ~5.5V DC
    Movement Resistance:
    ~1 kohm
    Series Resistor Included:
    9.1k ohm
    Panel Cutout Size:
    1.8 in x 0.75 in
    Depth Behind Panel:
    1.75 in
    Display Type:
    Analog Moving Coil (D'Arsonval)
    Scale:
    0–50 DC Volts
    Includes:
    Meter movement, 9.1k ohm series resistor, mounting bezel
    Form Factor:
    Panel Mount
    Country/Region of Manufacture:
    United States
    Condition:
    New – Open Box
    Seller Notes:
    Includes 9.1k ohm series resistor and gold-tone mounting bezel frame
    Condition Notes:
    Modutec ME DVV 050 U DC panel meter, new and unused in original box. Includes 9.1k ohm resistor and mounting bezel. Open-box — may have been stored long-term or removed from original packaging. No signs of use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $11.10
    Was: $28.00
  • Sperry D44C15 RF Isolator full side view showing label with model number and N-type connectors on both ends Sperry D44C15 RF Isolator reverse side view showing label text and knurled N-type connector end

    Sperry D44C15 RF Isolator N-Type Coax 4-7 GHz 12 dB Insertion Loss Microwave

    Sperry

    $20.70
    Was: $45.00
    Sperry D44C15 RF Isolator N-Type Coax 4-7 GHz 12 dB Insertion Loss Microwave In-line coaxial RF isolator designed to provide one-way signal transmission in microwave systems operating between 4 and 7...
    33926
    SKU:
    33926
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Sperry
    Model:
    D44C15
    MPN:
    D44C15
    Type:
    Coaxial RF Isolator
    SKU:
    33926
    Frequency Range:
    4–7 GHz
    Insertion Loss:
    12 dB
    Connector Type:
    N-Type (Male and Female)
    Form Factor:
    In-Line / Coaxial
    Length:
    Approximately 5 inches
    Application:
    Microwave signal isolation, RF test systems
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Sperry D44C15 RF Isolator, used, inspected and in good condition. Light surface wear and minor scuffing on body and connectors consistent with prior use. N-type connectors appear intact. Label legible.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.70
    Was: $45.00
  • S/M T50M5A N-Male 50 Ohm RF coaxial termination load — front view showing N-Male center pin and outer coupling nut S/M T50M5A RF termination load — rear/termination face view showing flat stainless steel load body and coupling ring

    S/M T50M5A N-Male 50 Ohm RF Coaxial Termination Load Measures 54 Ohm

    S/M

    $10.00
    Was: $20.00
    S/M T50M5A N-Male 50 Ohm RF Coaxial Termination Load Measures 54 OhmThe S/M T50M5A is an N-Male RF coaxial termination load rated at a nominal 50 Ohm impedance. This particular unit measures 54 Ohm...
    33925
    SKU:
    33925
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    S/M
    Model:
    T50M5A
    MPN:
    T50M5A
    Type:
    RF Coaxial Termination Load
    SKU:
    33925
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Termination measures 54 Ohm. Sold as a single unit.
    Connector Type:
    N-Male
    Impedance:
    50 Ohm (nominal); measures 54 Ohm
    Interface:
    N-Type Male
    Body Material:
    Nickel-plated brass / stainless steel
    Form Factor:
    Inline termination / plug-type
    Application:
    RF signal termination, coaxial cable testing
    Compatible With:
    N-Type coaxial RF systems and test equipment
    Condition Notes:
    S/M T50M5A N-Male RF coaxial termination. Inspected and in good used condition. Body and threads intact, center pin straight. Measures 54 Ohm (nominal 50 Ohm). Light handling wear on exterior.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $10.00
    Was: $20.00
  • Texscan FP-50 3dB BNC coaxial attenuator — angled view showing BNC male connector end and orange label Texscan FP-50 3dB BNC coaxial attenuator — opposite angle showing BNC female connector end and label markings

    Texscan FP-50 3dB BNC Coaxial Attenuator RF Signal Pad 50 Ohm 500 MHz

    Texscan

    $13.30
    Was: $30.00
    Texscan FP-50 3dB BNC Coaxial Attenuator RF Signal Pad 50 Ohm 500 MHz Fixed coaxial RF attenuator for reducing signal levels in RF and telecom systems. Provides 3 dB of attenuation across DC to 500...
    33900
    SKU:
    33900
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.20 LBS
    Brand:
    Texscan
    Model:
    FP-50
    MPN:
    FP-50
    Type:
    Fixed Coaxial RF Attenuator
    SKU:
    33900
    Attenuation:
    3 dB
    Impedance:
    50 Ohm
    Frequency Range:
    DC to 500 MHz (approx.)
    Connector Type:
    BNC Male to BNC Female
    Form Factor:
    Inline / Barrel
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Attenuator only; no additional accessories included.
    Condition Notes:
    Texscan FP-50 3dB BNC coaxial attenuator. Inspected and in good condition, pulled from a working environment. Both BNC connectors are clean and undamaged. Normal light surface wear present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $13.30
    Was: $30.00
  • Bird Electronic Corporation 80M Termaline Coaxial Load Resistor — top view showing label with Bird logo, model, watts, and ohms fields Bird 80M Termaline RF terminator — rear view showing N-type male connector and knurled body

    Bird Electronic 80M Termaline 5W 50 Ohm Coaxial Load Resistor RF Terminator

    Bird Electronics

    $28.00
    Was: $60.00
    Bird Electronic 80M Termaline 5W 50 Ohm Coaxial Load Resistor RF TerminatorA coaxial load resistor designed to terminate RF transmission lines during testing and adjustment of RF transmitters. The...
    33895
    SKU:
    33895
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Bird Electronic
    Model:
    80M
    MPN:
    80M
    Type:
    Coaxial Load Resistor / RF Terminator
    SKU:
    33895
    Impedance:
    50 Ohm
    Power Rating:
    5 Watts
    Series:
    Termaline
    Connector Type:
    N-Type Male (visible in photos)
    Form Factor:
    Handheld / Inline
    Application:
    RF Transmitter Testing and Adjustment
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no accessories included.
    Condition Notes:
    Bird 80M Termaline 50 ohm coaxial load resistor. Inspected and in good used condition; pulled from a working environment. Shows light surface tarnishing and age-consistent wear. N-type connector intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • W.H. Ferwalt X0139 Oscillator 10.55 kHz – angled top view showing label with model, frequency, and serial number fields W.H. Ferwalt X0139 Oscillator – top/rear view showing four wire leads protruding from black metal enclosure

    W.H. Ferwalt X0139 Oscillator 10.55 kHz Fixed Frequency Crystal Module

    W H Ferwalt

    $12.90
    Was: $30.00
    W.H. Ferwalt X0139 Oscillator 10.55 kHz Fixed Frequency Crystal Module Fixed frequency crystal oscillator module manufactured by W.H. Ferwalt. Generates a stable 10.55 kHz output signal for use in...
    33872
    SKU:
    33872
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    W.H. Ferwalt
    Model:
    X0139
    MPN:
    X0139
    Type:
    Fixed Frequency Crystal Oscillator Module
    SKU:
    33872
    Frequency:
    10.55 kHz
    Output Type:
    Fixed Frequency
    Form Factor:
    Enclosed Module with Wire Leads
    Condition:
    Used – Inspected, Not Bench-Tested
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; inspected and in good cosmetic condition, not bench-tested
    Condition Notes:
    W.H. Ferwalt X0139 oscillator inspected and in good condition. Not bench-tested at our facility. Enclosure and label intact; wire leads present and undamaged. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.90
    Was: $30.00
  • Q.V.S. Inc MOD-450R analog ohm meter movement front view showing OHMS scale with A.C. & D.C. marking and 4.5 inch round black housing Q.V.S. Inc MOD-450R meter movement rear view showing two red-ringed solder terminals and SEALED DO NOT OPEN label on black housing

    Q.V.S. Inc MOD-450R AC DC Ohm Meter Movement 2012 Ohm 4.5" Panel Round

    Q.V.S. Inc

    $32.00
    Was: $60.00
    Q.V.S. Inc MOD-450R AC DC Ohm Meter Movement 2012 Ohm 4.5" Panel RoundThe Q.V.S. Inc MOD-450R is an analog panel meter movement calibrated to measure resistance on both AC and DC circuits. It...
    33811
    SKU:
    33811
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Q.V.S. Inc
    Model:
    MOD-450R
    MPN:
    MOD-450R
    Secondary Model:
    LP-901
    SKU:
    33811
    Type:
    Analog Panel Meter Movement
    Measurement Type:
    Resistance (Ohms)
    Current Type:
    AC & DC
    Movement Resistance:
    2012 Ohm
    Full Scale:
    60
    Panel Diameter:
    4.5 inches
    Panel Shape:
    Round
    Form Factor:
    Panel Mount
    Scale:
    Ohms — multi-range (0–∞, multiple arcs)
    Connection Type:
    Solder terminals (rear-mounted, 2 terminals)
    Condition:
    Used – Inspected
    Seller Notes:
    Meter movement only; no leads or external hardware included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Q.V.S. Inc MOD-450R AC/DC Ohm Meter Movement. Inspected and in good condition. Clean face, legible scale, needle intact, rear terminals present. Normal handling wear on housing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $32.00
    Was: $60.00
  • E&M Laboratories S12T82 RF microwave isolator — angled front view showing INPUT and OUTPUT SMA-F port labels and mounting bracket E&M Laboratories S12T82 RF isolator — opposite angled view showing body and mounting bracket profile

    E&M Laboratories S12T82 RF Microwave Isolator SMA-F Connector Westlake Village

    E&M Laboratories

    $24.10
    Was: $55.00
    E&M Laboratories S12T82 RF Microwave Isolator SMA-F Connector Westlake Village The E&M Laboratories S12T82 is a compact RF microwave isolator designed with SMA-F (SMA female) input and output...
    33561
    SKU:
    33561
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    E&M Laboratories
    Model:
    S12T82
    MPN:
    S12T82
    Type:
    RF Microwave Isolator
    SKU:
    33561
    Connector Type:
    SMA-F (SMA Female)
    Number of Ports:
    2 (Input / Output)
    Mounting:
    Includes metal mounting bracket
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes attached metal mounting bracket. SMA-F input and output ports.
    Form Factor:
    Module with mounting bracket
    Application:
    RF signal isolation, microwave circuit protection
    Condition Notes:
    E&M Laboratories S12T82 RF microwave isolator inspected and in good used condition. Both SMA-F connectors intact. Mounting bracket included. Light surface wear consistent with age. Photos available.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $24.10
    Was: $55.00
  • Gremar 102-9112-003 TNC-P to TNC-M coaxial RF jumper cable, full length view showing both connectors and black jacket, approximately 8.75 inches Close-up of TNC male plug (TNC-P) connector end of Gremar 102-9112-003 coaxial cable, showing center pin and threaded coupling

    Gremar TNC-P to TNC-M Coaxial Cable 102-9112-003 8.75 Inch RF Jumper

    Gremar

    $12.00
    Was: $25.00
    Gremar TNC-P to TNC-M Coaxial Cable 102-9112-003 8.75 Inch RF JumperTNC coaxial RF jumper cable with male TNC connector on one end and female TNC connector on the other. Used to connect RF equipment...
    33516
    SKU:
    33516
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Gremar
    Model:
    6001Z
    MPN:
    102-9112-003
    Type:
    TNC Coaxial RF Jumper Cable
    SKU:
    33516
    Connector A:
    TNC Male (TNC-P)
    Connector B:
    TNC Female (TNC-M)
    Cable Length:
    8.75 Inches
    Connector Gender:
    Male to Female
    Cable Type:
    Coaxial
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Cable only; no additional accessories included.
    Form Factor:
    Jumper / Patch Cable
    Condition Notes:
    Gremar TNC-P to TNC-M coaxial cable 102-9112-003, 8.75 in. Inspected and in good used condition. Cable jacket intact, connectors clean and undamaged. Minor surface wear typical of use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Avantek UTA-9665 RF amplifier module – angled top view showing blue label with model and frequency range Avantek UTA-9665 broadband RF amplifier – opposite angled view showing SMA output connector and IN label

    Avantek UTA-9665 RF Amplifier 10-500MHz 11dB Gain SMA Broadband Module

    Avantek

    $28.00
    Was: $60.00
    Avantek UTA-9665 RF Amplifier 10-500MHz 11dB Gain SMA Broadband ModuleThe Avantek UTA-9665 is a compact connectorized broadband RF amplifier module covering 10 to 500 MHz, delivering 11 dB of gain at...
    33429
    SKU:
    33429
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Avantek
    Model:
    UTA-9665
    MPN:
    UTA-9665
    Type:
    Broadband RF Amplifier Module
    SKU:
    33429
    Frequency Range:
    10–500 MHz
    Gain:
    11 dB at 500 MHz
    Connector Type:
    SMA (female)
    Form Factor:
    Connectorized Module / Bench / Inline
    Patent Number:
    3493882
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit only. Tested and confirmed working.
    Condition Notes:
    Avantek UTA-9665 RF amplifier, 10–500 MHz. Tested and confirmed working; 11 dB gain verified at 500 MHz. Light scuffing on housing, label shows fading. SMA connectors intact. Good working condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • Triangle Microwave CO-361 Directional Coupler — angled front-left view showing CPL port on top, IN and OUT SMA ports on body Triangle Microwave CO-361 Directional Coupler — angled rear-right view showing SMA connectors and teal aluminum housing

    Triangle Microwave CO-361 Directional Coupler SMA RF Microwave Coaxial Component

    Triangle Microwave

    $35.00
    Was: $70.00
    Triangle Microwave CO-361 Directional Coupler SMA RF Microwave Coaxial ComponentThe Triangle Microwave CO-361 is a passive coaxial directional coupler in a compact, teal-anodized aluminum housing. It...
    33405
    SKU:
    33405
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Triangle Microwave
    Model:
    CO-361
    MPN:
    CO-361
    Type:
    Directional Coupler
    SKU:
    33405
    Connector Type:
    SMA (female)
    Number of Ports:
    3 — IN, OUT, CPL
    Housing Material:
    Aluminum alloy
    Housing Color:
    Teal / Blue-Green
    Form Factor:
    Benchtop / In-line module
    Application:
    RF signal sampling, power monitoring, test setups
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; no cables or accessories included.
    Condition:
    Used – Inspected and in Good Condition
    Condition Notes:
    Triangle Microwave CO-361 Directional Coupler — inspected, good used condition. Housing shows normal shelf wear; SMA ports (IN, OUT, CPL) are intact with good threads. No damage to body.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • HP 788C Directional Detector front and top view showing HP logo label, two coaxial port stubs on top, and Type N connector on left side HP 788C Directional Detector side view showing Type N male coaxial connector with gold center pin and weathered metal housing

    HP Hewlett Packard 788C Directional Detector 3.7-8.3 GHz RF Microwave Signal

    HP

    $90.00
    Was: $175.00
    HP Hewlett Packard 788C Directional Detector 3.7-8.3 GHz RF Microwave Signal The HP 788C is a directional detector used for RF signal sampling and microwave power monitoring across the C and S band...
    33315
    SKU:
    33315
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    HP
    Model:
    788C
    MPN:
    788C
    Type:
    Directional Detector
    SKU:
    33315
    Frequency Range:
    3.7–8.3 GHz (3.7–8.3 GC)
    Frequency Band:
    C-Band / S-Band microwave
    Connector Type:
    Type N (male input); APC-7 / precision coaxial ports
    Application:
    RF signal sampling, microwave power monitoring
    Form Factor:
    Handheld / Inline microwave component
    Seller Notes:
    Unit only, as photographed. No accessories included.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    HP 788C Directional Detector pulled from a working environment, inspected and in good condition. Coaxial connectors intact. Housing shows age wear and label paint loss. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $175.00
  • K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay — top and side view showing cylindrical stainless body, K&L Microwave Incorporated label, Salisbury MD USA markings, and solder lug terminals on top K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay — bottom flange view showing six SMA female connectors labeled J1 through J6 arranged radially with blue seals on stainless mounting plate

    K&L Microwave 6MP-28-F-0-4 SP6T Coaxial Relay Indicator Switch 18 GHz SMA

    K&L

    $275.00
    Was: $550.00
    K&L Microwave 6MP-28-F-0-4 SP6T Coaxial Relay Indicator Switch 18 GHz SMAThe K&L Microwave 6MP-28-F-0-4 is a single pole, 6-throw (SP6T) coaxial relay designed for RF and microwave signal switching...
    33312
    SKU:
    33312
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    K&L Microwave
    Model:
    6MP-28-F-0-4
    MPN:
    6MP-28-F-0-4
    Type:
    SP6T Coaxial Relay with Indicator Switch
    SKU:
    33312
    Configuration:
    Single Pole, 6 Throw (SP6T)
    Frequency Range:
    DC to 18 GHz (estimated)
    Connector Type:
    SMA Female
    Number of Ports:
    7 (1 common + 6 throw ports)
    Indicator Switch:
    Yes — insulated, indicates energized position
    Form Factor:
    Flange Mount, Cylindrical Body
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Pulled from a working environment; includes indicator switch function
    Condition:
    Used – Pulled from Working Environment
    Application:
    RF Signal Routing, Microwave Test Systems, ATE
    Condition Notes:
    K&L Microwave 6MP-28-F-0-4 SP6T coaxial relay inspected and in good used condition. Pulled from a working environment. Indicator switch appears functional. Estimated good to 18 GHz. SMA connectors clean.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • HP Hewlett Packard H424A Crystal Detector – angled three-quarter view showing body, BNC output port, and blue WR-112 flange base HP H424A Crystal Detector – close-up front view of BNC output connector on blue flange mount

    HP Hewlett Packard H424A Crystal Detector WR-112 Waveguide BNC 7.05-10.0 GHz

    Hewlett Packard

    $65.00
    Was: $125.00
    HP Hewlett Packard H424A Crystal Detector WR-112 Waveguide BNC 7.05-10.0 GHz X-BandA waveguide-mounted crystal detector for X-Band microwave applications. This detector converts RF signals to...
    33301
    SKU:
    33301
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Brand:
    HP
    Model:
    H424A
    MPN:
    H424A
    Type:
    Waveguide Crystal Detector
    SKU:
    33301
    Frequency Range:
    7.05 to 10.0 GHz
    Frequency Band:
    X-Band
    Waveguide Size:
    WR-112
    Output Connector:
    BNC
    Detector Polarity:
    Negative (NEG)
    Flange Type:
    WR-112 Standard Flange
    Form Factor:
    Waveguide-Mounted Module
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes blue protective flange cover. Pulled from a working environment.
    Condition Notes:
    HP H424A Crystal Detector in good used condition. Pulled from a working environment. Body shows typical wear; BNC connector and WR-112 flange are clean and intact. Blue flange cover included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Weinschel Engineering 41922 fixed coaxial RF attenuator – full unit side view showing black cylindrical body with N-type connectors Weinschel Engineering 41922 attenuator label close-up showing 10.1 dB at 0.5 GHz, 10.0 dB at 1.0 GHz, 9.6 dB at 1.5 GHz calibration chart

    Weinschel Engineering 41922 Fixed Coaxial Attenuator 10dB 1.5 GHz N-Type RF

    Weinschel Eng.

    $30.00
    Was: $60.00
    Weinschel Engineering 41922 Fixed Coaxial Attenuator 10dB 1.5 GHz N-Type RF The Weinschel Engineering 41922 is a fixed coaxial RF attenuator in a ruggged cylindrical in-line form factor. The...
    33299
    SKU:
    33299
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Weinschel Engineering
    Model:
    41922
    MPN:
    41922
    Type:
    Fixed Coaxial RF Attenuator
    SKU:
    33299
    Attenuation:
    10 dB (nominal at 1.5 GHz)
    Frequency Range:
    DC to 1.5 GHz
    Connector Type:
    N-Type (male and female)
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Unit only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    In-Line / Cylindrical
    Application:
    RF/Microwave signal level control and testing
    Condition Notes:
    Weinschel Engineering 41922 10dB coaxial RF attenuator. Inspected and in good used condition. Black body shows light surface wear; both N-type connectors are intact. No accessories included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $30.00
    Was: $60.00