Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • BEI 01238/30-710460-001 C-Band Satcom Channel Changer – front-left view showing D-sub multi-pin connector on front face and four shaft posts on top BEI C-Band Satcom Channel Changer 01238/30-710460-001 – right-side view showing overall box enclosure and latch detail

    BEI 01238/30-710460-001 C-Band Satcom Channel Changer 12 24 Ch Pittman 24VDC

    BEI

    $125.00
    Was: $250.00
    BEI 01238/30-710460-001 C-Band Satcom Channel Changer 12 24 Ch Pittman 24VDCC-Band satellite communications channel selector module with dual Pittman DC gear motors and encoders. Supports 12 or 24...
    31535
    SKU:
    31535
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    BEI Sensors & Systems
    Model:
    01238/30-710460-001
    MPN:
    01238/30-710460-001
    Secondary Model:
    17080/771-05-0001-NC
    Type:
    C-Band Satcom Channel Changer
    SKU:
    31535
    Number of Channels:
    12 or 24
    Frequency Band:
    C-Band
    Application:
    Satellite Communications (Satcom)
    Motor 1:
    Pittman GM9413D780, 24VDC, 127.7:1 Ratio
    Motor 2:
    Pittman GM9413D779, 24VDC, 38.3:1 Ratio
    Motor Voltage:
    24VDC
    Number of Motors:
    2 DC Gear Motors
    Number of Encoders:
    2
    Date Code:
    D/C 9608
    Connector Type:
    D-Sub (approx. 37-pin) multi-pin connector
    Form Factor:
    Box / Module
    Seller Notes:
    Includes 2 Pittman DC gear motors and 2 encoders as described. No accessories.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    BEI 01238/30-710460-001 C-Band Satcom Channel Changer. Inspected and in good condition; pulled from a working environment where it was in use and functional. Pittman motors and encoders present. Minor surface wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • Varian 110641 panel wattmeter front view showing 0–5W and dBW dual scale with green and red colored range indicator lines and front coaxial input connector Varian 110641 wattmeter rear and side view showing meter movement mechanism, multi-pin terminal connections, and mounting hardware studs

    Varian 110641 Wattmeter Panel Meter 0-5W dBW Scale FS=100uADC RF Power

    Varian

    $40.00
    Was: $80.00
    Varian 110641 Wattmeter Panel Meter 0-5W dBW Scale FS=100uADC RF PowerAnalog panel-mount wattmeter designed for RF power measurement in industrial and telecom applications. Provides simultaneous...
    31534
    SKU:
    31534
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Varian
    Model:
    110641
    MPN:
    110641
    Type:
    Analog Panel Wattmeter
    SKU:
    31534
    Measurement Type:
    RF Power (Watts / dBW)
    Scale Range:
    0–5 Watts / 0–7 dBW (dual scale)
    Full Scale Current:
    FS = 100 uADC
    Display Size:
    1.375 x 2.75 inches
    Scale Markings:
    Watts and dBW dual scale with colored bands
    Connector Type:
    Single coaxial input connector (front)
    Form Factor:
    Panel Mount
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Sold as shown; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Varian 110641 panel wattmeter inspected and in good used condition. Meter face clean and legible, colored range bands intact, connector and terminals undamaged. Minor surface wear on case.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • STS Inc Equalizer 2 front panel view showing INPUTS, FAULTS, TEST POINTS sections and red top cover in 19-inch rack chassis STS Inc Equalizer 2 rear panel showing IEC AC input, two DB-15 connectors (J11, J12), IF IN and IF OUT BNC connectors

    STS Inc Equalizer 2 Satellite IF Equalizer 19" Rackmount 2U EQ1 EQ2 EQ3 Satcom

    STS Inc

    $150.00
    Was: $300.00
    STS Inc Equalizer 2 Satellite IF Equalizer 19" Rackmount 2U EQ1 EQ2 EQ3 Satcom RFThe STS Inc Equalizer 2 is a 19-inch 2U rackmount satellite intermediate frequency (IF) equalizer designed for use in...
    31516
    SKU:
    31516
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    20.00 LBS
    Brand:
    STS
    Model:
    Equalizer 2
    MPN:
    Equalizer 2
    Type:
    Satellite IF Equalizer
    SKU:
    31516
    Form Factor:
    19" Rackmount, 2U
    Number of EQ Channels:
    3 (EQ1, EQ2, EQ3)
    IF Channels / Paths:
    IF IN, IF OUT (BNC connectors)
    Connector Types:
    BNC (IF IN/OUT), DB-15 (J11, J12 rear control)
    Rear Connectors:
    J11 DB-15, J12 DB-15, J1 IF IN BNC, J10 IF OUT BNC
    Fault Indicators:
    EQ1, EQ2, EQ3, IF, Fuse, Fail LEDs on front panel
    Test Points:
    IF Level: EQ1, EQ2, EQ3, +5VDC, GND (front panel)
    Power Requirements:
    115V AC (1/4A fuse) or 220V AC (1/8A fuse)
    Fuse Ratings:
    1/8A at 220V; 1/4A at 115V
    Power Switch:
    Front panel ON/OFF rotary switch with green LED indicator
    Application:
    Satellite ground station IF path equalization, Satcom
    Frequency Band:
    IF (Intermediate Frequency) — Satcom/Microwave
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satcom environment
    Country/Region of Manufacture:
    United States
    Condition Notes:
    STS Inc Equalizer 2 satellite IF equalizer — inspected, in good used condition. Pulled from a working satcom environment. Light surface wear on chassis. Front panel connectors and controls intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Sector Motor SM3-151-3 waveguide switch assembly top view showing motor, transformer, capacitor, fan, and wiring harness on aluminum mounting plate Sector Motor SM3-151-3 assembly side view showing black finned heatsink, cooling fan, switch motor, and Varian L137NW2 power supply module on aluminum plate

    Sector Motor SM3-151-3 C/F Band Waveguide Switch Varian L137NW2 24V 7.5A

    Sector Motor

    $625.00
    Was: $1,300.00
    Sector Motor SM3-151-3 C/F Band Waveguide Switch Varian L137NW2 24V 7.5AMotor-driven waveguide switch for C/F band RF signal routing in satellite communications. Baseball-style switch mechanism with...
    31515
    SKU:
    31515
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    30.00 LBS
    Brand:
    Sector Motor Industries
    Model:
    SM3-151-3
    MPN:
    SM3-151-3
    Secondary Model:
    Varian L137NW2
    Type:
    Motor-Driven Waveguide Switch
    SKU:
    31515
    Frequency Band:
    C/F Band
    Switch Style:
    Baseball Waveguide Switch
    Drive Voltage:
    24V DC
    Drive Current:
    7.5A
    Power Supply Input Voltage:
    115/230V AC, 50/60 Hz
    Power Supply Model:
    Varian L137NW2 / Standard Power 200B24H
    Power Supply MPN:
    200B24H
    Power Supply Manufacturer:
    Standard Power Inc. (Acme Electric Corp)
    Mounting Plate Dimensions:
    14 in x 18 in aluminum mounting plate
    Switch Motor Ident Number:
    53263
    Switch Motor Part Number:
    40-110972-2D
    Switch Motor Patent:
    U.S. Patent 3,970,980
    Switch Motor Manufacturer:
    Sector Motor Industries, Deer Park, NY
    Varian Power Supply Serial No.:
    340
    Standard Power PCB Part No.:
    01-101167-06 R3
    Condition:
    Used – Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes Varian L137NW2 power supply and aluminum mounting plate (14x18 in)
    Application:
    Satellite earth station, C/F band RF signal path switching
    Compatible With:
    C/F band satellite uplink/downlink systems, earth stations
    Condition Notes:
    Sector Motor SM3-151-3 C/F Band Waveguide Switch with Varian L137NW2 power supply. Inspected and in good used condition; pulled from a working environment where it was actively in use and functional. Mounted on 14x18 in aluminum plate.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $625.00
    Was: $1,300.00
  • Standard Power Inc 01-000149 power supply panel top view showing all four power supply modules mounted on black metal base plate with wiring Standard Power Inc 01-000149 power supply panel side view showing large blue finned heatsink on SPS 120-15 module and large filter capacitor

    Standard Power Inc 01-000149 Power Supply Panel 4 Supplies 5V 15V 24V 115/230V

    Standard Power Inc.

    $80.00
    Was: $150.00
    Standard Power Inc 01-000149 Power Supply Panel 4 Supplies 5V 15V 24V 115/230VMulti-output power supply panel containing four individual Standard Power Inc supply modules. Accepts 115/230V AC input...
    31513
    SKU:
    31513
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    28.00 LBS
    Brand:
    Standard Power
    Model:
    01-000149
    MPN:
    01-000149
    Type:
    Multi-Output Power Supply Panel
    SKU:
    31513
    Number of Outputs:
    4
    Input Voltage:
    115/230V AC
    Input Frequency:
    47–440 Hz (SPS 40-5, SPS 15-15); 50/60 Hz (SPS 120-15, 15B24H)
    Output 1 Model:
    SPS 40-5
    Output 1 MPN:
    01-300923-00 C2
    Output 1 Voltage:
    5V DC
    Output 1 Current:
    5.0A
    Output 2 Model:
    SPS 15-15
    Output 2 MPN:
    0000 301568 01 B1
    Output 2 Voltage:
    15V DC
    Output 2 Current:
    0.7A
    Output 3 Model:
    SPS 120-15
    Output 3 MPN:
    01-101559-00 E1
    Output 3 Voltage:
    15V DC
    Output 3 Current:
    8.0A
    Output 4 Model:
    15B24H
    Output 4 MPN:
    01-101167-08 R
    Output 4 Voltage:
    24V DC
    Output 4 Current:
    0.6A
    Power Requirements:
    115/230V AC, 47–440 Hz
    Form Factor:
    Panel / Open Frame
    Manufacturer:
    Standard Power Inc (subsidiary of Acme Electric Corp)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected
    Seller Notes:
    Panel with 4 individual Standard Power Inc supplies; no enclosure
    Condition Notes:
    Standard Power Inc 01-000149 power supply panel inspected and in good used condition. All 4 modules present (SPS 40-5, SPS 15-15, SPS 120-15, 15B24H). Normal wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $80.00
    Was: $150.00
  • ITM Systems ITM-141Q Dual RF Generator – front and right-side angled view showing front panel with dual LED watt meters, power switch, and schematic diagram ITM Systems ITM-141Q – rear panel view showing four rectangular waveguide output ports with gold flanges and attached AC power cord

    ITM Systems ITM-141Q Dual RF Generator LPA Waveguide Rackmount Satcom

    ITM Systems

    $500.00
    Was: $1,000.00
    ITM Systems ITM-141Q Dual RF Generator LPA Waveguide Rackmount SatcomThe ITM Systems ITM-141Q is a rackmount dual-channel RF generator and power amplifier system designed for satellite communications...
    31510
    SKU:
    31510
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    31.00 LBS
    Brand:
    ITM Systems
    Model:
    ITM-141Q
    MPN:
    ITM-141Q
    Type:
    Dual RF Generator / LPA Amplifier
    SKU:
    31510
    Form Factor:
    Rackmount
    Number of Channels:
    2 (LPA 1, LPA 2)
    Output Type:
    Waveguide RF Output
    Output Indicator:
    Dual LED watt meters (LPA 1, LPA 2)
    Connector Type:
    Waveguide (rectangular, flanged)
    Control Interface:
    Local / Remote / Auto / Manual (front panel)
    Remote Interface:
    DB-15 connector (J1), multi-pin connector (J2)
    Power Connection:
    Standard 3-prong AC line cord
    Front Panel Controls:
    Power switch, Low RF Trip/Reset, LCL/RMT/AUTO/MAN, ON LINE
    Internal Components:
    Dual LPA amplifier chains, waveguide combiner/hybrid, transformer, control PCB
    Application:
    Satellite uplink RF amplification, satcom ground station
    Condition:
    Used – Inspected
    Seller Notes:
    Includes AC power cord. Four waveguide ports on rear panel.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    ITM Systems ITM-141Q Dual RF Generator, inspected and in good used condition. Light surface wear on chassis and front panel; waveguide flanges show typical oxidation. AC power cord included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • Varian VJW2731A5 Channel Tuner Control – full front and rear stack view showing rackmount chassis and rear board assembly Varian VJW2731A5 – close-up of front panel channel display window with status labels: PIN INH, UNLOCKED, TUNING, LOCKING, UNLOCKING, LOCKED

    Varian VJW2731A5 Channel Tuner Control Rackmount Satellite VJW-2731 1U

    Varian

    $150.00
    Was: $300.00
    Varian VJW2731A5 Channel Tuner Control Rackmount Satellite VJW-2731 1UThe Varian VJW2731A5 is a rackmount Channel Tuner Control unit designed for satellite ground station and satcom frequency...
    31495
    SKU:
    31495
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    18.00 LBS
    Brand:
    Varian
    Model:
    VJW2731A5
    MPN:
    VJW2731A5
    Secondary Model:
    VJW-2731
    Type:
    Channel Tuner Control
    SKU:
    31495
    Form Factor:
    Rack Mount, 1U
    Power Requirements:
    115V / 230V AC (fuse rated 3A/115V, 1.5A/230V)
    Fuse Rating:
    3A/115V, 1.5A/230V
    Interface / Connectors:
    DB25 (J1), Multi-pin circular (J3), TB1 terminal block
    Terminal Block:
    TB1, positions 1–6
    Front Panel Controls:
    Numeric keypad (0–9), CHAN, FREQ, CLR, ENT buttons
    Front Panel Indicators:
    Fuse Alarm LED, Channel display window, status labels
    Status Indicators:
    PIN INH, UNLOCKED, TUNING, LOCKING, UNLOCKING, LOCKED
    Country/Region of Manufacture:
    Canada
    Application:
    Satellite channel tuning and frequency control
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; inspected and in good condition.
    Condition Notes:
    Varian VJW2731A5 Channel Tuner Control. Inspected and in good condition. Front keypad, display window, connectors, and terminal block appear intact and undamaged. Normal light wear from prior rack use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Scientific Atlanta 8761 LNA Dual Power Supply – front panel view showing PWR SUPPLY 1 and PWR SUPPLY 2 sections with green and yellow indicator LEDs and alarm indicators Scientific Atlanta 8761 LNA Power Supply – rear panel view showing LNA PWR OUT connector (J5), LNA ALARMS connector (J6), DC IN connectors (J3, J4), and fuse holders

    Scientific Atlanta 8761 LNA Dual Power Supply 18VDC 2-Channel For Parts

    Scientific Atlanta

    $75.00
    Was: $150.00
    Scientific Atlanta 8761 LNA Dual Power Supply 18VDC 2-Channel For PartsDual-channel 18VDC power supply designed to provide bias power for Low Noise Amplifiers (LNAs) in satellite earth station...
    31444
    SKU:
    31444
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    11.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    8761
    MPN:
    8761
    Type:
    LNA Dual Channel Power Supply
    SKU:
    31444
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Channel 1 failed — no output, LED off, fuses good. Channel 2 outputs ~18 VDC. Sold as-is.
    Number of Outputs:
    2
    Output Voltage:
    18 VDC (per channel)
    Input Voltage:
    105–130 VAC / 210–260 VAC, 50/60 Hz, 100 VA Max
    Fuse Rating (LNA 1 & 2):
    3/4A GBA
    Fuse Rating (F1):
    1A SLO BLO (105–130V) / 1/2A SLO BLO (210–260V)
    Fuse Rating (F3/F4):
    1A SLO BLO
    Connector - LNA PWR OUT:
    J5 – DB-15 (15-pin D-sub)
    Connector - LNA Alarms:
    J6 – DB-25 (25-pin D-sub)
    Connector - DC IN:
    J3 / J4 – 3-pin inline connector
    Front Panel Indicators:
    Green LED per channel (PWR), Red LED per channel (Alarm)
    Form Factor:
    Rackmount
    Application:
    LNA (Low Noise Amplifier) bias power for satellite earth stations
    Country/Region of Manufacture:
    United States
    Compatible With:
    Scientific Atlanta satellite earth station LNA systems
    Condition Notes:
    Scientific Atlanta 8761 LNA Dual Power Supply — Channel 1 non-functional (no output, green LED off, fuses good). Channel 2 outputs ~18 VDC. Sold as-is for parts or repair only. Not guaranteed functional.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • ComStream CM101 PSK Digital Satellite Modem front and top view — rackmount chassis with cream-colored front panel and rack ears ComStream CM101 front panel close-up showing PSK Digital Modem model name label

    ComStream CM101 PSK Digital Satellite Modem AADA-CCQB-CCQB 120V 60Hz 135W

    Comstream

    $95.00
    Was: $200.00
    ComStream CM101 PSK Digital Satellite Modem AADA-CCQB-CCQB 120V 60Hz 135WThe ComStream CM101 is a rackmount PSK (Phase Shift Keying) digital satellite modem designed for ground-station satellite...
    31435
    SKU:
    31435
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    22.00 LBS
    Brand:
    ComStream
    Model:
    CM101
    MPN:
    AADA-CCQB-CCQB
    Secondary Model:
    AADA-CCQB-CCQB
    SKU:
    31435
    Type:
    PSK Digital Satellite Modem
    Form Factor:
    Rackmount
    Power Requirements:
    120V AC, 60Hz, 135W
    Voltage:
    120V AC
    Frequency:
    60Hz
    Power Consumption:
    135 Watts
    Modulation:
    PSK (Phase Shift Keying)
    Interface - IF Input:
    BNC (Rx IF — J5)
    Interface - IF Output:
    BNC (Tx IF — J7)
    Interface - Data:
    D-Sub 37-pin (J2 Tx/Rx Data)
    Interface - Remote Control:
    D-Sub 25-pin (J3 Remote Control)
    Interface - Ext Reference:
    BNC (J1 Ext Ref)
    Interface - AGC Monitor:
    BNC (J4 AGC Monitor)
    Interface - Tx Enable:
    BNC (J6 Tx Enable)
    Tx Power Adjustment:
    Front-accessible trimmer (AT1 Tx Pwr Adj)
    Status Indicators:
    Front panel LED: DEMOD status, MOD status
    Internal Power Supply:
    Power-One HCAA-60W-A International Series
    PSU Output:
    +5VDC @ 6.0A w/OVP; +12 or +15VDC @ 1.0A
    Fuse Rating:
    1.5A SB 250V AC
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only — no accessories included. Pulled from working environment.
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    ComStream CM101 PSK Digital Satellite Modem in good used condition. Pulled from a working environment where it was actively in use. Light surface wear on front panel. Chassis, connectors, and internal boards intact. No accessories included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • LNR Communications CF12 012660-1 rackmount chassis front panel showing three LNA Power Supply plug-in units with ON/OFF switches and Summary Alarm indicators LNR CF12 012660-1 rear view showing three cooling fans and D-sub connectors (J1, J2, J3) on each plug-in unit

    LNR Communications CF12 012660-1 LNA Power Supply Power & Control Module 3x

    LNR

    $200.00
    Was: $400.00
    LNR Communications CF12 012660-1 LNA Power Supply Power & Control Module 3xRackmount chassis containing three plug-in CF12 LNA Power Supply modules. Supplies power and control signals to satellite...
    31431
    SKU:
    31431
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    50.00 LBS
    Brand:
    LNR Communications
    Model:
    CF12
    MPN:
    012660-1
    SKU:
    31431
    Type:
    LNA Power Supply Power & Control Module
    Form Factor:
    Rackmount
    Number of Plug-In Units:
    3
    Plug-In Unit Model:
    CF12 LNA Power Supply
    Front Panel Controls:
    ON/OFF toggle switch, Summary Alarm indicator (per unit)
    Connector Type:
    D-Sub (9-pin and 15-pin), labeled J1, J2, J3 per module
    Cooling:
    Rear-mounted cooling fan per plug-in unit (3 total)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes chassis with 3 installed CF12 LNA Power Supply plug-in units
    Application:
    Satellite LNA / Low-Noise Amplifier Power and Control
    Compatible With:
    Satellite ground station LNA systems
    Condition Notes:
    LNR Communications CF12 012660-1 LNA Power Supply Module with 3 plug-in units. Pulled from working environment, inspected, good condition. Minor surface marks and connector oxidation visible. All 3 units and fans present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • HP Format 1C SPDT latching coaxial switch – front/side view showing two N-type female ports on the face HP Format 1C SPDT latching coaxial switch – opposite side view showing gold SMA-F input port and label tags reading '42'

    HP Format 1C SPDT Latching Coaxial Switch SMA-F to N-F RF Microwave 10-15V

    HP

    $75.00
    Was: $150.00
    HP Format 1C SPDT Latching Coaxial Switch SMA-F to N-F RF Microwave 10-15VSPDT latching coaxial switch for RF and microwave signal routing. Features SMA-F input and dual N-F outputs, with 10–15V DC...
    31430
    SKU:
    31430
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Brand:
    HP
    Model:
    Format 1C
    MPN:
    Format 1C
    Type:
    SPDT Latching Coaxial Switch
    SKU:
    31430
    Switch Configuration:
    SPDT (Single Pole Double Throw)
    Switching Type:
    Latching
    Input Connector:
    SMA-F (Female)
    Output Connectors:
    2x N-F (Female)
    Coil Voltage:
    10–15V DC
    Application:
    RF / Microwave Signal Routing
    Form Factor:
    Benchtop / Standalone Module
    Housing:
    Machined Aluminum Enclosure
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Pulled from a working RF environment; no cables or accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This HP Format 1C SPDT Latching Coaxial Switch is in good used condition. Pulled from a working RF environment where it was in use and functional. Connectors appear clean and undamaged. Normal light surface wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • LNR Communications Tridundant Low Noise Amplifier Local Channel Select and Monitor – front panel view showing LNA indicators, polarization select buttons, and power switch LNR Communications Tridundant LNA Monitor – rear panel view showing circular multi-pin LNA input connectors J1–J3, D-sub remote input J4, switch control connectors J5–J6, and PWR/MON input J8

    LNR Communications Tridundant LNA Local Channel Select Monitor 506004788

    LNR Communications

    $200.00
    Was: $400.00
    LNR Communications Tridundant LNA Local Channel Select Monitor 506004788Rackmount redundancy switching and monitoring unit for satellite ground station low noise amplifier (LNA) systems. Manages...
    31429
    SKU:
    31429
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    16.00 LBS
    Brand:
    LNR Communications
    Model:
    Tridundant LNA Local Channel Select and Monitor
    MPN:
    506004788
    Code Ident:
    51029
    Type:
    Tridundant Low Noise Amplifier Switch & Monitor
    SKU:
    31429
    Seller Notes:
    Unit only; no additional cables or accessories observed.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rackmount, 2U
    Power Requirements:
    117V AC (danger label visible internally)
    Number of LNA Channels:
    3 (LNA 1, LNA 2, LNA 3)
    Polarization Channels:
    2 (Polarization 1 – HORZ, Polarization 2 – VERT)
    LNA Select Modes:
    On Line / Stand By per channel
    Control Mode:
    Local or Remote; Manual or Auto
    Summary Alarm Indicators:
    3 red indicator lamps (LNA 1, LNA 2, LNA 3)
    Rear Connectors:
    J1 Channel 1 LNA Input, J2 Channel 2 LNA Input, J3 Channel 3 LNA Input
    Rear Connectors 2:
    J4 Remote Input (D-sub), J5 POL 1 Switch Control, J6 POL 2 Switch Control
    Rear Connectors 3:
    J7 Noise Source Output, J8 PWR/MON Input (circular multi-pin)
    Connector Types:
    Circular mil-spec multi-pin (J1–J3, J8), D-sub 25-pin (J4), D-sub 15-pin (J5, J6)
    Application:
    Satellite ground station LNA redundancy switching
    Manufacturer Location:
    Hauppauge, New York
    Condition Notes:
    LNR Communications Tridundant LNA Local Channel Select Monitor (506004788) inspected and in good used condition. Front panel controls intact; rear connectors show normal service wear. Chassis has typical light scuffing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Wegener Communications 1602 STS RX Mainframe – rear panel view showing DB-25 connector and open card bays Wegener Communications 1602 STS RX Mainframe – top and side view with caution high voltage label visible

    Wegener Communications 1602 STS RX Mainframe w/ Micro Phase MP-4050 ATIS Mod

    Wegener Communications

    $100.00
    Was: $200.00
    Wegener Communications 1602 STS RX Mainframe w/ Micro Phase MP-4050 ATIS Mod1U rackmount STS receiver mainframe with integrated Micro Phase Communications MP-4050 ATIS modulator card. Designed for...
    31428
    SKU:
    31428
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    24.00 LBS
    Brand:
    Wegener Communications
    Model:
    1602
    MPN:
    1602
    Secondary Model:
    MP-4050
    Type:
    STS RX Mainframe with ATIS Modulator
    SKU:
    31428
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes installed Micro Phase Communications MP-4050 ATIS Modulator card
    Form Factor:
    Rackmount, 1U
    Compatible With:
    Wegener STS satellite receiver systems
    Modulator Type:
    ATIS Modulator
    Included Modules:
    Micro Phase Communications MP-4050 ATIS Modulator
    Connector Types:
    DB-25, BNC, multi-pin ribbon connectors
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Wegener Communications 1602 STS RX Mainframe with MP-4050 ATIS Modulator. Inspected, in good used condition. Pulled from a working environment where it was in active use and functional. Normal rack wear. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Scientific Atlanta 7500 CFG Satcom Video Receiver – front panel three-quarter view showing analog meter, power indicator, and installed circuit boards with top cover removed Scientific Atlanta 7500 CFG Video Receiver – rear panel showing AC power supply assembly 229000 with heatsink, audio screw terminal blocks, BNC video outputs, and Scientific-Atlanta branding label

    Scientific Atlanta 7500 CFG Satcom Video Receiver Rackmount IF Input BNC

    Varian

    $125.00
    Was: $250.00
    Scientific Atlanta 7500 CFG Satcom Video Receiver Rackmount IF Input BNCRack-mount satellite video receiver for TVRO and broadcast downlink applications. Processes intermediate frequency (IF) signals...
    31407
    SKU:
    31407
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    25.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    7500 CFG
    MPN:
    7500 CFG
    Type:
    Satellite Video Receiver
    SKU:
    31407
    Form Factor:
    Rack Mount
    Configuration Code:
    CFG AAB-BZZ-HZAA
    AC Power Supply Assembly:
    ASSY 229000
    IF Input Impedance:
    75 Ohm
    Bandwidth:
    500 kHz BW (module label visible)
    AGC/MGC:
    Selectable AGC / MGC
    Video Outputs:
    Video 1 Output, Video 2 Output (BNC)
    Auxiliary Output:
    Auxiliary BNC Output
    Composite BB Output:
    Composite Baseband Out (BNC)
    IF Input:
    IF Input (BNC)
    Down Converter Power Output:
    DWN. CONV. PWR. OUT
    Audio Outputs:
    Program Audio A/B, OPT 1/2/3 Audio (screw terminal)
    IF Monitor:
    IF Monitor BNC, 75 Ohm
    Zero On Noise:
    Zero On Noise control present
    Bandwidth Select:
    BW1 / BW2 selectable
    Internal Module:
    7500 Video Clamp module (PN 211052 visible)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes installed modules and AC power supply assembly 229000
    Country/Region of Manufacture:
    United States
    Application:
    Satellite Downlink, TVRO, Broadcast Video Distribution
    Condition Notes:
    This Scientific-Atlanta 7500 CFG Satcom Video Receiver is in good used condition with normal wear from prior rack use. All rear panel connectors and internal modules are present. Not powered or tested at our facility.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • LNR Communications 506013332 DC-P2 Remote Switch Control and Monitor – front panel view showing Select, Alarms, Mode, and Enabled indicators on 1U rackmount chassis LNR Communications 506013332 DC-P2 Remote Switch Control Monitor – rear view showing DB25 connector and part number label on gold-tone chassis

    LNR Communications 506013332 DC-P2 Remote Switch Control Monitor SatCom RF

    LNR Communications

    $150.00
    Was: $300.00
    LNR Communications 506013332 DC-P2 Remote Switch Control Monitor SatCom RFRemote control and monitoring unit for satellite communications RF switch systems. Provides manual and automatic switching...
    31398
    SKU:
    31398
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    6.00 LBS
    Brand:
    LNR Communications
    Model:
    DC-P2
    MPN:
    506013332
    SKU:
    31398
    Type:
    Remote Switch Control and Monitor
    Application:
    Satellite Communications (SatCom) / RF Switch Control
    Form Factor:
    1U Rackmount
    Front Panel Controls:
    Normal/Cross Select, Unit 1/Unit 2 Alarms, Manual/Auto Mode, Enabled
    Rear Connector:
    DB25 female (25-pin D-sub)
    Switch Positions:
    Normal, Cross
    Alarm Inputs:
    Unit 1, Unit 2
    Operating Modes:
    Manual, Auto
    Condition:
    Used – Inspected and in Good Condition
    Compatible With:
    LNR Communications SatCom RF switch systems
    Seller Notes:
    Unit only; no additional accessories observed.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    LNR Communications 506013332 DC-P2 Remote Switch Control and Monitor. Inspected and in good condition. Front panel controls and indicators intact. Light shelf wear on chassis. No damage to rear connector.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Varian VJW-2722H Remote Control Unit — front panel view showing LED display, RF power output controls, and emergency off button Varian VJW-2722H Remote Control Unit — rear panel view showing two multi-pin D-sub connectors and Varian label

    Varian VJW-2722H Remote Control Unit 010002850-01 Microwave Satcom 19" 2U

    Varian

    $275.00
    Was: $550.00
    Varian VJW-2722H Remote Control Unit 010002850-01 Microwave Satcom 19" 2UThe Varian VJW-2722H is a 2U 19-inch rackmount remote control unit built by Varian's Microwave Equipment Division in Santa...
    31395
    SKU:
    31395
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    Varian
    Model:
    VJW-2722H
    MPN:
    010002850-01
    Secondary Model:
    01002850-00
    Type:
    Microwave / Satcom Remote Control Unit
    SKU:
    31395
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no cables or accessories included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    2U 19" Rackmount
    Manufacturer Division:
    Varian Microwave Equipment Division, Santa Clara, CA
    Front Panel Display:
    LED digital display — RF Power Output (Watts, Peak, dBW)
    RF Power Controls:
    Low Limit, High Limit, RF Drive Adj, Watts/Peak/dBW select
    High Voltage Controls:
    Off/Stdby, On buttons with indicator LEDs
    Mode Controls:
    Heater Time Delay On, Auto, Manual, Local, Remote
    Fault / Alarm Indicators:
    Sum Fault, Ext Intlk, Hi RF, Lo RF; Reset, LED Test
    Emergency Control:
    Emergency Off (large red pushbutton)
    Rear Connectors:
    Two multi-pin D-sub style connectors (rear panel)
    Application:
    Satcom / Microwave amplifier remote control and monitoring
    Compatible With:
    Varian microwave / TWT amplifier systems
    Condition Notes:
    This Varian VJW-2722H Microwave Remote Control Unit has been inspected and is in good used condition. Pulled from a working environment. Front panel and controls appear intact with normal wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • Fairchild SM2900 SM290 satellite modem front panel showing LCD display, keypad, and fault/test/lock indicators Fairchild SM2900 SM290 satellite modem rear panel showing RS422 interface connector, D-sub connectors, and IEC AC power inlet

    Fairchild SM2900 SM290 70-140 MHz Satellite Modem RS422 IF 005919-000

    Fairchild

    $65.00
    Was: $125.00
    Fairchild SM2900 SM290 70-140 MHz Satellite Modem RS422 IF 005919-000Rackmount satellite modem designed for L-band intermediate frequency (IF) operations. Processes satellite signals in the 70–140...
    31350
    SKU:
    31350
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    22.00 LBS
    Brand:
    Fairchild Data Corporation
    Model:
    SM2900
    Secondary Model:
    SM290
    MPN:
    005919-000
    SKU:
    31350
    Type:
    Satellite Modem
    Condition:
    Used – Inspected
    Form Factor:
    Rackmount
    Frequency Range:
    70 MHz to 140 MHz
    Interface Type:
    RS422
    IF Band:
    70/140 MHz
    M&C Software Revision:
    1.00
    Connectors:
    BNC (IF IN, STA CLK, IF OUT), DB25 (RS422, J9 AUX, J10 FAULT)
    Front Panel:
    LCD display, keypad, fault/test/lock indicators
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only, no accessories. Inspected and in good condition.
    Condition Notes:
    This Fairchild SM2900 SM290 satellite modem has been inspected and appears to be in good condition. Front panel, connectors, and internal card assembly look intact with normal wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Unbranded M31461 Stubby Tester for Static Electricity Unbranded M31461 Stubby Tester for Static Electricity

    M31461 Hard Disk Drive HDD Fault Tester +12V +5V Voice Coil Head Select

    Unbranded

    $65.00
    Was: $125.00
    M31461 Hard Disk Drive HDD Fault Tester +12V +5V Voice Coil Head Select IndicatorThe M31461 is a benchtop hard disk drive fault test fixture designed to monitor and indicate fault conditions across...
    31261
    SKU:
    31261
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    5.00 LBS
    Brand:
    Unbranded
    Model:
    M31461
    MPN:
    M31461
    Type:
    Hard Disk Drive Fault Tester / HDD Test Fixture
    SKU:
    31261
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Benchtop
    Enclosure Color:
    Blue and Gray Metal
    Fault Indicators:
    +12VHDA Short, +5VHDA Short, Voice Coil Short, Voice Coil Open
    Additional Indicators:
    Voice-Coil Short to Ground, Head Select 0, Head Select 1, Write Unsafe
    Display Type:
    LED Fault Indicator Lights (multiple)
    Controls:
    UP/DOWN Toggle Switch, Power Rocker Switch
    Interface / Connector:
    Ribbon Cable Connector (flat flex)
    Seller Notes:
    Includes attached ribbon cable and power cord as shown in photos.
    Application:
    Hard Disk Drive Testing, HDD Fault Diagnosis, Voice Coil & Head Select Verification
    Condition Notes:
    This M31461 HDD Fault Tester has been inspected and is in good used condition, pulled from a working environment. Enclosure shows light surface wear consistent with bench use. LED indicators, toggle switch, and connectors appear intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Moonlander Stubby M31460 Static Electrical Tester – front panel view showing LED indicators, toggle switch, red pushbutton, and product label Moonlander Stubby M31460 Static Electrical Tester – rear and side view showing attached AC power cord with standard NEMA 5-15 plug

    Moonlander Stubby M31460 Static Electrical Tester Voice Coil Shorts Head Sel

    Custom

    $75.00
    Was: $150.00
    Moonlander Stubby M31460 Static Electrical Tester Voice Coil Shorts Head Sel Benchtop static electrical tester designed for disk drive head and voice coil diagnostics. Tests voice coil resistance,...
    31259
    SKU:
    31259
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Unbranded
    Model:
    Moonlander Stubby
    MPN:
    M31460
    Type:
    Static Electrical Tester
    SKU:
    31259
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Benchtop
    Power Requirements:
    120V AC (standard NEMA 5-15 plug)
    Features:
    Voice Coil Resistance, Voice Coil Shorts, Write Unsafe, +12VDC Short, Head Select 0/1
    Indicators:
    Red, green, and yellow LED indicators for each test function
    Controls:
    Toggle switch (Voice Coil Res/Shorts), Head Select switch, Power rocker switch
    Application:
    Disk drive head and voice coil static electrical testing
    Seller Notes:
    Includes attached AC power cord (NEMA 5-15).
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Moonlander Stubby M31460 Static Electrical Tester pulled from a working environment where it was in active use and functional. Inspected and in good used condition. Front panel, LEDs, and controls intact. Includes AC power cord.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Dymek Corporation 852-1 Head Tester rackmount unit – front panel overview showing frequency, WT function, erase function, and write controls Dymek 852-1 front panel close-up – frequency selector (DC/125K/250K), WT function knob (ALT/ONCE/CONT), erase function knob, ON/OFF toggle, and WRITE toggle

    Dymek Corporation 852-1 Magnetic Head Tester Rackmount Unit Made in USA

    Dymek

    $125.00
    Was: $250.00
    Dymek Corporation 852-1 Magnetic Head Tester Rackmount Unit Made in USA The Dymek Corporation 852-1 is a rackmount magnetic read/write head tester designed for testing and evaluating magnetic...
    31252
    SKU:
    31252
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    20.00 LBS
    Brand:
    Dymek Corporation
    Model:
    852-1
    MPN:
    852-1
    SKU:
    31252
    Type:
    Magnetic Read/Write Head Tester
    Form Factor:
    Rackmount
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Frequency Settings:
    DC, 125K, 250K (front panel selector)
    WT. Function Modes:
    ALT, ONCE, CONT
    Erase Function Modes:
    WOTE, WTE, TE ONLY
    Write Current Modes:
    LOW, VAR (variable)
    W/O Filter:
    VM, DIRECT
    Head Select:
    HEAD-1, HEAD-0
    Index Range:
    20, 30, 50, 60, 70, 80, 90 (rotary selector)
    Track:
    16, 00 indicators visible on front panel
    Rear Connectors:
    J10 RMS/VM, J7 Scope, J11 Milliammeter, J8 Index, J9 Symmetry, J4, J5 multi-pin, J6 IEC AC inlet
    Power Connector:
    IEC C14 (standard 3-pin AC inlet)
    Fuse Rating:
    3A (visible on rear panel)
    Rear Panel Switches:
    ON/OFF SYM, VARIABLE/FIXED WRITE
    Seller Notes:
    Unit only — no accessories included. Inspected and in good condition.
    Condition Notes:
    Dymek 852-1 Magnetic Head Tester inspected and in good condition. Normal surface wear and handwritten stickers on front panel knobs. All controls and rear connectors appear intact. Made in USA.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00