Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
OSM RF Load Termination N-Male Connector 50 Ohm Coaxial Dummy Load 3001 6100-00
OSM
$12.00Was: $25.00OSM RF Load Termination N-Male Connector 50 Ohm Coaxial Dummy Load 3001 6100-00RF coaxial dummy load termination for N-Male connectors. Used to terminate unused ports in RF and microwave test...33248- SKU:
- 33248
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- OSM
- Model:
- 3001 6100-00
- MPN:
- 3001 6100-00
- Type:
- RF Coaxial Load / Termination
- SKU:
- 33248
- Connector Type:
- N-Male (N-M)
- Impedance:
- 50 Ohm
- Form Factor:
- Inline / Inline Coaxial Component
- FSC Code:
- 16179
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only — no additional accessories included.
- Compatible With:
- N-Male coaxial RF systems and test setups
- Condition Notes:
- OSM RF Load Termination N-Male 3001 6100-00 has been inspected and is in good used condition. Minor surface wear on body; connector threads and center pin are undamaged. Label intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Anzac C254124 RF Power Divider Splitter Combiner SMA-F Connectors Microwave
Anzac
$28.00Was: $60.00Anzac C254124 RF Power Divider Splitter Combiner SMA-F Connectors MicrowaveCoaxial RF power divider with one input port and two output ports, operating bidirectionally for splitting or combining...33241- SKU:
- 33241
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Anzac
- Model:
- C254124
- MPN:
- C254124
- Type:
- RF Power Divider / Splitter / Combiner
- SKU:
- 33241
- Connector Type:
- SMA-F (SMA Female)
- Number of Ports:
- 3 (1 input, 2 output / bidirectional)
- Technology:
- Coaxial RF / Microwave
- Housing / Enclosure:
- Metal (dark anodized aluminum)
- Form Factor:
- Benchtop / Inline Module
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Anzac C254124 RF Power Divider inspected and in good used condition. Housing is solid, SMA-F connectors intact with normal wear. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Weinschel Engineering 10-10 Precision Coaxial Attenuator 10 dB N-Type RF
Weinschel Engineering
$40.00Was: $80.00Weinschel Engineering 10-10 Precision Coaxial Attenuator 10 dB N-Type RF Microwave Fixed precision coaxial attenuator rated at 10 dB (10.08 dB per label). Provides consistent signal reduction across...33228- SKU:
- 33228
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Weinschel Engineering
- Model:
- 10-10
- MPN:
- 10-10
- Type:
- Fixed Precision Coaxial Attenuator
- SKU:
- 33228
- Attenuation:
- 10 dB (10.08 dB per label)
- Connector Type:
- N-Type (N-Male and N-Female)
- Frequency Range:
- DC to Microwave
- Body Dimensions:
- 89 x 40 mm
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Attenuator only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Form Factor:
- In-Line / Handheld
- Application:
- RF, Microwave, Lab Test and Measurement
- Condition Notes:
- Weinschel Engineering 10-10 precision 10 dB coaxial attenuator. Inspected and in good used condition. N-male and N-female connectors clean and undamaged. Labels intact and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
LCF Enterprises A017 RF Power Amplifier 26V DC SMA-M Semi-Rigid Coax Satcom
LCF Enterprises
$50.00Was: $100.00LCF Enterprises A017 RF Power Amplifier 26V DC SMA-M Semi-Rigid Coax SatcomRF power amplifier module designed for satellite communications and microwave RF applications. Operates on +26V DC supply...33226- SKU:
- 33226
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- LCF Enterprises
- Model:
- A017
- MPN:
- 400-290-35-35B
- SKU:
- 33226
- Type:
- RF Power Amplifier
- Power Supply Voltage:
- +26V DC
- Connector Type:
- SMA-M (semi-rigid coaxial cable)
- Housing Dimensions:
- 116 mm x 33 mm
- Form Factor:
- Module / Inline
- Country/Region of Manufacture:
- United States
- Copyright / Date Code:
- 1990
- Application:
- Satellite Communications (Satcom), Microwave RF
- Frequency Range:
- Unknown — not specified
- Gain:
- Unknown — not specified
- Condition:
- Used – Inspected
- Seller Notes:
- Includes attached SMA-M semi-rigid coax pigtails. Power, gain, and frequency specs unknown.
- Condition Notes:
- LCF Enterprises A017 RF Power Amplifier inspected and in good used condition. Housing intact, SMA-M coax connectors clean. Light surface wear. Power, gain, and frequency specs unknown; not bench-tested. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
Steel Interface Box 4x3x1.25 DB9 Input DB25 Control RD Signal Breakout Module
Steel
$30.00Was: $60.00Steel Interface Box 4x3x1.25 DB9 Input DB25 Control RD Signal Breakout Module Signal breakout and interface module for routing receive data (RD) signals between serial and control systems. Benchtop...33102- SKU:
- 33102
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- Interface Box 4x3x1.25
- Type:
- Signal Interface / Breakout Box
- SKU:
- 33102
- Condition:
- Used – Inspected
- Dimensions:
- Approx. 4 x 3 x 1.25 in.
- Connector 1 (Input):
- DB9 Female (9-pin D-Sub)
- Connector 2 (Control):
- DB25 Female (25-pin D-Sub)
- Signal Label:
- RD (Receive Data)
- Enclosure Material:
- Steel
- Form Factor:
- Benchtop / Standalone
- Seller Notes:
- Unit only; no cables included.
- Condition Notes:
- Steel interface box inspected and in good condition. Light surface scuffing typical of prior use. DB9 input and DB25 control connectors present and intact. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
Steel Interface Box 3x5.5x1.25 DB25 DB9 Serial Parallel Electronic Test
Steel
$20.00Was: $40.00Steel Interface Box 3x5.5x1.25 DB25 DB9 Serial Parallel Electronic Test Enclosure This is a compact steel interface box measuring 3 x 5.5 x 1.25 inches, fitted with a DB25 (25-pin) female connector...33101- SKU:
- 33101
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 3x5.5 Interface Box
- Type:
- Steel Interface Enclosure Box
- SKU:
- 33101
- Condition:
- Used – Pulled from Working Environment
- Dimensions:
- 3 x 5.5 x 1.25 inches
- Connector 1:
- DB25 Female (25-pin D-sub)
- Connector 2:
- DB9 Female (9-pin D-sub)
- Interface Type:
- Serial / Parallel
- Enclosure Material:
- Steel
- Color:
- Gray / Teal Green
- Form Factor:
- Benchtop / Desktop
- Seller Notes:
- Unit only; no cables included. Pulled from working environment.
- Condition Notes:
- Steel DB25/DB9 interface box pulled from a working environment. Inspected and in good used condition. Light surface wear only; both connectors appear intact. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
Steel Enclosure RF Equalizer FREQ MHz Boost dB Diff BNC 5x4x3 w/ Power Supply
Steel Enclosure
$75.00Was: $150.00Steel Enclosure RF Equalizer FREQ MHz Boost dB Diff BNC 5x4x3 w/ Power SupplyThis is a custom-built steel enclosure measuring approximately 5x4x3 inches housing a self-contained RF equalizer circuit...33057- SKU:
- 33057
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- Steel Enclosure RF Equalizer 5x4x3
- Type:
- RF Equalizer / IC Test Fixture Enclosure
- SKU:
- 33057
- Condition:
- As-Is / For Parts or Not Working
- Enclosure Dimensions:
- 5 x 4 x 3 inches
- Enclosure Material:
- Steel
- Controls:
- Freq. MHz dial, Boost dB 10-turn pot, DIFF switch
- Front Panel Connectors:
- 4x BNC (differential inputs)
- Side Connectors:
- BNC output, 4-pin circular connector
- Rear Panel:
- IEC AC inlet, fuse holder, power indicator LED
- Internal Power Supply Brand:
- Computer Products / Boschert
- Internal Power Supply Model:
- HM530
- PSU Output Voltage:
- 5V DC
- PSU Output Current:
- 3000 mA (3A)
- PSU Input Voltage:
- 115 VAC
- PSU Input Frequency:
- 50/400 Hz
- PSU Input Current:
- 320 mA
- Line Filter Brand:
- Corcom
- Seller Notes:
- Sold for parts. Includes internal power supply, opto coupler, IC test fixture, 10-turn potentiometers, and line filter.
- Form Factor:
- Benchtop / Desktop Enclosure
- Condition Notes:
- Unbranded steel enclosure RF equalizer (5x4x3) sold AS-IS for parts. Cosmetically good; all internal components present (HM530 PSU, opto coupler, IC test fixture, line filter, potentiometers). Not tested. No functionality guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
ARD EQ/Filter RF Signal Equalizer Booster dB MHz BNC Single Diff EQ DFF 120VAC
ARD
$130.00Was: $250.00ARD EQ/Filter RF Signal Equalizer Booster dB MHz BNC Single Diff EQ DFF 120VACBenchtop RF signal equalizer and filter unit designed to condition and boost broadband RF signals. Features adjustable...33053- SKU:
- 33053
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 5.00 LBS
- Brand:
- ARD
- Model:
- RD EQ/Filter
- MPN:
- RD EQ/Filter
- Type:
- RF Signal Equalizer / Filter
- SKU:
- 33053
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no accessories included. Calibration table label present on top.
- Power Requirements:
- 120VAC, 1/4 Amp
- Input Connectors:
- BNC — Single-Ended and Differential (DIFF)
- Output Connectors:
- 4x BNC — EQ and DFF outputs
- Boost Range:
- Adjustable via front-panel BOOST [dB] knob
- Frequency Range:
- Adjustable via front-panel FREQ [MHz] knob
- Frequency Caution:
- Do not exceed 130 on FREQ knob; cycle power if exceeded
- Form Factor:
- Benchtop / Desktop
- Signal Type:
- RF / Broadband
- Output Types:
- Equalized (EQ) and Differentiated (DFF)
- Calibration Table:
- Equalizer Calibration Table label affixed to top panel
- Country/Region of Manufacture:
- United States
- Condition Notes:
- This ARD RD EQ/Filter RF Signal Equalizer has been inspected and is in good used condition. Chassis and connectors show minor bench wear. BNC inputs/outputs appear intact. Control knobs present and functional. 120VAC.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$130.00Was: $250.00 -
20 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Hand-Built PCB Card
Bessel
$30.00Was: $60.0020 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Hand-Built PCB CardThis is a hand-built 5-pole Bessel low pass filter with a 20 MHz cutoff frequency, constructed on a copper-clad PCB card. The...33023- SKU:
- 33023
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 20 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 20 MHz
- Input Impedance:
- 50 Ohms
- Output Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Form Factor:
- PCB Card / Module
- Construction:
- Hand-built on copper-clad PCB
- SKU:
- 33023
- Condition:
- Used – Inspected and in good condition
- Seller Notes:
- Filter card only — no enclosure or additional accessories included.
- Condition Notes:
- 20 MHz 5-pole Bessel low pass filter PCB card. Inspected and in good used condition. BNC connectors intact, all components present, no visible damage. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
9.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$35.00Was: $70.009.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 9.5 MHz 5-pole Bessel low pass filter in a rugged metal enclosure, with 50-ohm impedance on both the input...33021- SKU:
- 33021
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 9.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 9.5 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Filter Topology:
- Low Pass
- Form Factor:
- Enclosed / Benchtop Module
- Enclosure Material:
- Metal
- Condition:
- Used – Pulled from Working Environment
- SKU:
- 33021
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- 9.5 MHz 5-pole Bessel low pass filter in good used condition. Enclosure shows light surface wear; BNC connectors intact. Label present and legible. Pulled from working environment.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$28.00Was: $60.009.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalBenchtop low pass filter designed to attenuate high-frequency signals above 9.0 MHz while preserving lower frequencies...33020- SKU:
- 33020
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 9.0 MHz 5-Pole Bessel Low Pass Filter
- MPN:
- 15
- Type:
- Bessel Low Pass Filter
- SKU:
- 33020
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no cables or accessories included.
- Form Factor:
- Enclosed / Benchtop
- Filter Type:
- Bessel Low Pass
- Number of Poles:
- 5
- Cutoff Frequency:
- 9.0 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Input Connector:
- BNC
- Output Connector:
- BNC
- Frequency Range:
- Low Pass, cutoff 9.0 MHz
- Enclosure Material:
- Metal (painted steel/aluminum)
- Application:
- RF Signal Conditioning, Test & Measurement
- Condition Notes:
- 9.0 MHz 5-Pole Bessel Low Pass Filter inspected and in good used condition. Metal enclosure shows light surface wear; BNC connectors clean and undamaged. Spec label intact and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
8.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$65.00Was: $125.008.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 8.0 MHz Bessel low pass filter configured in a 5-pole topology with a 50-ohm input and output impedance...33018- SKU:
- 33018
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 8.0 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 8.0 MHz
- Impedance:
- 50 Ohm
- Connector Type:
- BNC
- Filter Response:
- Low Pass
- Enclosure:
- Yes — metal housing with mounting flanges
- Input Connector:
- BNC (female)
- Output Connector:
- BNC (female)
- SKU:
- 33018
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only — no additional accessories included.
- Condition Notes:
- This 8.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good used condition. Metal enclosure shows light surface wear; both BNC connectors appear clean and undamaged. Label intact and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
7.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF Signal
Bessel
$28.00Was: $60.007.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF SignalThis is a 5-pole Bessel low pass filter with a 7.5 MHz cutoff frequency, designed for RF signal conditioning in 50-ohm systems...33017- SKU:
- 33017
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 7.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 7.5 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Input Connector:
- BNC Female
- Output Connector:
- BNC Female
- Filter Response:
- Bessel (Maximally Flat Group Delay)
- Pass Type:
- Low Pass
- Form Factor:
- Housed / Benchtop Module
- Housing:
- Metal enclosure with mounting flanges
- SKU:
- 33017
- Condition:
- Used – Inspected
- Seller Notes:
- Filter only — no additional cables or accessories included.
- Condition Notes:
- This 7.5 MHz 5-pole Bessel low pass filter has been inspected and is in good used condition. Housing shows light scuffing; BNC connectors are clean and intact. Label is present and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
6.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$28.00Was: $60.006.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalA 5-pole Bessel low pass filter designed to attenuate RF signals above 6.0 MHz while maintaining a flat passband response...33007- SKU:
- 33007
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 6.0 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Bessel Low Pass Filter
- SKU:
- 33007
- Condition:
- Used – Inspected
- Cutoff Frequency:
- 6.0 MHz
- Filter Type:
- Bessel
- Filter Topology:
- Low Pass
- Number of Poles:
- 5
- Input Impedance:
- 50 Ohms
- Output Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Form Factor:
- Enclosed / Benchtop
- Enclosure Material:
- Metal
- Seller Notes:
- Includes filter unit in metal enclosure with BNC IN and BNC OUT connectors.
- Condition Notes:
- This 6.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good condition. Metal enclosure shows light surface wear. Both BNC connectors are intact with no corrosion. Label is clean and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dB
Pomona Electronics
$75.00Was: $150.00Pomona Electronics 3.75 MHz Band Pass Filter Mountable BNC In/Out 20dBThis Pomona Electronics band pass filter is centered at 3.75 MHz and is housed in a compact, mountable aluminum enclosure. It...32973- SKU:
- 32973
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Pomona Electronics
- Model:
- 3.75 MHz Band Pass Filter
- Type:
- Band Pass Filter
- Center Frequency:
- 3.75 MHz (peaks at 3.79 MHz)
- Insertion Loss:
- 20.2 dB
- Q Factor:
- 26.6
- -3 dB Bandwidth:
- 3.716 MHz to 3.858 MHz
- -20 dB Limits:
- 3.53 MHz to 4.09 MHz
- Attenuation Range:
- Additional 15 dB via volume control
- Connector Type:
- BNC (IN and OUT)
- Form Factor:
- Mountable enclosure with mounting flanges
- Calibrated By:
- Scope-Teka
- SKU:
- 32973
- Condition:
- Used – Inspected, good condition
- Seller Notes:
- Calibration sticker present (Scope-Teka). Unit only — no accessories included.
- Condition Notes:
- Pomona Electronics 3.75 MHz band pass filter. Inspected and in good used condition. Enclosure intact with light surface wear. BNC connectors and rotary control present and undamaged. Scope-Teka calibration sticker on front panel.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Pomona Electronics 1.25 MHz Band Pass Filter BNC In/Out F-033 RF Signal
Pomona Electronics
$75.00Was: $150.00Pomona Electronics 1.25 MHz Band Pass Filter BNC In/Out F-033 RF SignalBenchtop band pass filter designed to isolate and pass RF signals at 1.25 MHz while attenuating out-of-band frequencies...32970- SKU:
- 32970
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Pomona Electronics
- Model:
- F-033
- MPN:
- F-033
- Type:
- Band Pass Filter
- SKU:
- 32970
- Center Frequency:
- 1.25 MHz (peak at 1.265 MHz)
- Insertion Loss:
- 21.8 dB
- -3 dB Bandwidth:
- 1.24 MHz to 1.28 MHz
- -20 dB Limits:
- 1.18 MHz to 1.36 MHz
- Connector Type:
- BNC (IN and OUT)
- Number of Ports:
- 2 (1x IN, 1x OUT)
- Form Factor:
- Benchtop / Panel-Mount Box
- On/Off Switch:
- Yes — toggle switch on front panel
- Enclosure:
- Metal box with mounting flanges
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only — no additional accessories included
- Condition Notes:
- Pomona Electronics F-033 1.25 MHz Band Pass Filter. Inspected and in good condition. Metal enclosure shows light surface wear; BNC connectors and toggle switch appear clean and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
RG-58/U Coaxial Cable 18 inch TNC-M to SMA-M 50 Ohm RF Patch Cable Black
Black
$20.00Was: $40.00RG-58/U Coaxial Cable 18 inch TNC-M to SMA-M 50 Ohm RF Patch Cable BlackRG-58/U coaxial patch cable with TNC male and SMA male connectors. Used to connect RF equipment, antennas, and test instruments...32967- SKU:
- 32967
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- RG-58/U
- Type:
- Coaxial RF Patch Cable
- Cable Type:
- RG-58/U
- Connector 1:
- TNC-M (TNC Male)
- Connector 2:
- SMA-M (SMA Male)
- Cable Length:
- 18 inches (approx. 1.5 ft)
- Impedance:
- 50 Ohm
- Cable Color:
- Black
- Connector Material:
- Nickel-plated (TNC); Gold-plated (SMA)
- SKU:
- 32967
- Condition:
- Used – Inspected
- Seller Notes:
- Single coaxial patch cable. No additional accessories included.
- Condition Notes:
- RG-58/U TNC-M to SMA-M coaxial cable inspected and in good used condition. Cable jacket is intact, no cuts or kinks. Both connectors are in good shape with normal wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
5-Pole Bessel Low Pass Filter 15 MHz 50 Ohm In/Out RF Card Handmade PCB
Bessel
$22.00Was: $40.005-Pole Bessel Low Pass Filter 15 MHz 50 Ohm In/Out RF Card Handmade PCBThis is a hand-built 5-pole Bessel low pass filter constructed on a perforated copper-clad PCB, designed to pass signals below...32947- SKU:
- 32947
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- 5-Pole Bessel 15MHz Low Pass Filter
- Type:
- Low Pass RF Filter
- SKU:
- 32947
- Condition:
- Used – Inspected
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 15 MHz
- Input Impedance:
- 50 Ohms
- Output Impedance:
- 50 Ohms
- Filter Response:
- Low Pass
- Form Factor:
- PCB Card / Module
- Construction:
- Hand-built on perforated PCB
- Connector Type:
- SMA / BNC-style (visible in photos)
- Seller Notes:
- Hand-built 5-pole Bessel low pass filter card. No case or external connectors beyond on-board connectors.
- Condition Notes:
- This 5-Pole Bessel 15 MHz Low Pass Filter card has been inspected and appears to be in good used condition. Hand-built PCB; solder joints intact, both SMA connectors present and undamaged, no visible cracks or broken traces.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$22.00Was: $40.00 -
6.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$30.00Was: $60.006.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a 5-pole Bessel low-pass filter designed to attenuate frequencies above 6.5 MHz while passing lower frequencies with...32942- SKU:
- 32942
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 6.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Bessel Low Pass Filter
- SKU:
- 32942
- Condition:
- Used – Inspected
- Filter Type:
- Bessel
- Response:
- Low Pass
- Cutoff Frequency:
- 6.5 MHz
- Number of Poles:
- 5
- Impedance:
- 50 Ohm
- Connector Type:
- BNC (female panel-mount, IN and OUT)
- Form Factor:
- Enclosed / Benchtop
- Enclosure Material:
- Metal (blue painted aluminum)
- Seller Notes:
- Filter only; no additional accessories included.
- Condition Notes:
- This 6.5 MHz 5-pole Bessel low-pass filter has been inspected and is in good used condition. The enclosure shows light wear; both BNC connectors are clean and undamaged. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
8.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out RF Enclosure
Bessel
$40.00Was: $80.008.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out RF EnclosureA benchtop low-pass filter module with 5-pole Bessel topology and 8.5 MHz cutoff frequency. Filters high-frequency components from...32941- SKU:
- 32941
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 8.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Bessel Low Pass Filter
- SKU:
- 32941
- Condition:
- Used – Inspected
- Filter Type:
- Bessel
- Pass Type:
- Low Pass
- Cutoff Frequency:
- 8.5 MHz
- Number of Poles:
- 5
- Impedance:
- 50 Ohm
- Input Impedance:
- 50 Ohm
- Output Impedance:
- 50 Ohm
- Connector Type:
- BNC (Female)
- Form Factor:
- Enclosed / Benchtop Module
- Enclosure Material:
- Metal
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- This 8.5 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good condition. Metal enclosure is intact, BNC connectors are clean, and dust caps are in place. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00