Description
9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Benchtop low pass filter designed to attenuate high-frequency signals above 9.0 MHz while preserving lower frequencies. Features a 5-pole Bessel topology for smooth group delay characteristics and operates at 50-ohm impedance with BNC connectors on input and output.
Specifications & What's Included
- Model: 9.0 MHz 5-Pole Bessel Low Pass Filter (MPN 15)
- Cutoff Frequency: 9.0 MHz
- Filter Type: 5-Pole Bessel Low Pass
- Impedance: 50 Ohms
- Connectors: BNC input and output
- Enclosure: Painted metal (steel/aluminum)
- Includes: Unit only; no cables or accessories
Applications
Used in RF signal conditioning, test and measurement setups, and laboratory environments where precise frequency filtering is required. Bessel filters are common in applications requiring minimal phase distortion across the passband. Suitable for telecommunications testing, spectrum analysis, and general-purpose RF circuit development where unwanted high-frequency noise or interference must be removed from signals below 9.0 MHz.
This 9.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good used condition. The metal enclosure shows light scuffing and surface wear consistent with bench use — visible on the top and side panels — but is structurally sound with no cracks or deformation. Both BNC connectors (IN and OUT) appear clean and undamaged. The specification label on top is intact and fully legible. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
9.0 MHz 5-Pole Bessel Low Pass Filter |
MPN: |
15 |
Type: |
Bessel Low Pass Filter |
SKU: |
33020 |
Condition: |
Used – Inspected |
Seller Notes: |
Unit only; no cables or accessories included. |
Form Factor: |
Enclosed / Benchtop |
Filter Type: |
Bessel Low Pass |
Number of Poles: |
5 |
Cutoff Frequency: |
9.0 MHz |
Impedance: |
50 Ohms |
Connector Type: |
BNC |
Input Connector: |
BNC |
Output Connector: |
BNC |
Frequency Range: |
Low Pass, cutoff 9.0 MHz |
Enclosure Material: |
Metal (painted steel/aluminum) |
Application: |
RF Signal Conditioning, Test & Measurement |
Condition Notes: |
9.0 MHz 5-Pole Bessel Low Pass Filter inspected and in good used condition. Metal enclosure shows light surface wear; BNC connectors clean and undamaged. Spec label intact and legible. |
