Description
8.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out RF Enclosure
A benchtop low-pass filter module with 5-pole Bessel topology and 8.5 MHz cutoff frequency. Filters high-frequency components from RF signals while maintaining linear phase response characteristic of Bessel designs.
Specifications & What's Included
- Filter Type: 5-Pole Bessel Low Pass
- Cutoff Frequency: 8.5 MHz
- Impedance: 50 Ohm (input and output)
- Connectors: BNC Female (in/out)
- Enclosure: Metal, benchtop form factor
- Unit only; no accessories included
Applications
Bessel low-pass filters are used in RF and telecom test setups where phase linearity is required across the passband. Common applications include signal conditioning in measurement systems, interference suppression in analog circuits, and output filtering in function generators and RF synthesizers. The 8.5 MHz cutoff makes this suitable for legacy telecom equipment, audio-frequency RF applications, and general laboratory filtering tasks where harmonic suppression is needed below this frequency threshold.
This 8.5 MHz 5-Pole Bessel Low Pass Filter has been inspected and appears to be in good condition. The metal enclosure is intact with no significant damage, and both BNC connectors are present and look clean. Yellow dust caps are in place on both ports. The label on top is legible and undamaged. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Unbranded |
Model: |
8.5 MHz 5-Pole Bessel Low Pass Filter |
Type: |
Bessel Low Pass Filter |
SKU: |
32941 |
Condition: |
Used – Inspected |
Filter Type: |
Bessel |
Pass Type: |
Low Pass |
Cutoff Frequency: |
8.5 MHz |
Number of Poles: |
5 |
Impedance: |
50 Ohm |
Input Impedance: |
50 Ohm |
Output Impedance: |
50 Ohm |
Connector Type: |
BNC (Female) |
Form Factor: |
Enclosed / Benchtop Module |
Enclosure Material: |
Metal |
Seller Notes: |
Unit only; no additional accessories included. |
Condition Notes: |
This 8.5 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good condition. Metal enclosure is intact, BNC connectors are clean, and dust caps are in place. Please contact us with any questions. |
