null
Bessel

7.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF Signal

(No reviews yet) Write a Review
SKU:
33017
MPN:
7.5 MHz
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
3.00 LBS
Shipping:
Calculated at Checkout
  • 7.5 MHz 5-pole Bessel low pass filter in blue-green metal housing — angled front-left view showing BNC input connector and label on top
  • 7.5 MHz Bessel low pass filter — IN side panel with panel-mount BNC female input connector and mounting flanges
  • 7.5 MHz Bessel low pass filter — OUT side panel labeled '12 OUT' with panel-mount BNC female output connector
  • Close-up of filter label reading: 7.5 MHz Bessel Filter, 5 Pole, IN / OUT, 50 Ohm In/Out, Low Pass
$28.00
Was: $60.00
Current Stock: 1

Sold Out

Description

7.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF Signal

This is a 5-pole Bessel low pass filter with a 7.5 MHz cutoff frequency, designed for RF signal conditioning in 50-ohm systems. It attenuates frequencies above the cutoff while preserving group delay characteristics.

Specifications & What's Included

  • Cutoff Frequency: 7.5 MHz
  • Filter Type: 5-Pole Bessel (Maximally Flat Group Delay)
  • Impedance: 50 Ohms
  • Connectors: BNC Female (input and output)
  • Form Factor: Metal-housed benchtop module with mounting flanges
  • Filter only — no cables or accessories included

Applications

Bessel low pass filters are used in telecommunications, test equipment, and signal processing to remove high-frequency noise and harmonics while maintaining minimal phase distortion. This 7.5 MHz unit is suited for audio-frequency and low-speed data applications requiring flat group delay response. Common uses include anti-aliasing in data acquisition systems and bandwidth limiting in RF test setups.

Condition: Used
This 7.5 MHz 5-pole Bessel low pass filter has been inspected and is in good used condition. The metal housing shows some light scuffing and minor surface wear consistent with prior use, but is structurally sound with no dents or damage. Both BNC connectors appear clean and intact. The spec label on the bottom is present and fully legible. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Unbranded
Model:
7.5 MHz 5-Pole Bessel Low Pass Filter
Type:
Low Pass Filter
Filter Type:
Bessel
Number of Poles:
5
Cutoff Frequency:
7.5 MHz
Impedance:
50 Ohms
Connector Type:
BNC
Input Connector:
BNC Female
Output Connector:
BNC Female
Filter Response:
Bessel (Maximally Flat Group Delay)
Pass Type:
Low Pass
Form Factor:
Housed / Benchtop Module
Housing:
Metal enclosure with mounting flanges
SKU:
33017
Condition:
Used – Inspected
Seller Notes:
Filter only — no additional cables or accessories included.
Condition Notes:
This 7.5 MHz 5-pole Bessel low pass filter has been inspected and is in good used condition. Housing shows light scuffing; BNC connectors are clean and intact. Label is present and legible.
View AllClose

Related Products

Related Products

9.0 MHz 5-Pole Bessel low pass filter in blue metal enclosure – three-quarter front view showing BNC output connector and mounting flanges 9.0 MHz Bessel low pass filter – IN end panel with BNC input connector and mounting holes
Add to Cart
Quick view

9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$28.00
Was: $60.00
9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalBenchtop low pass filter designed to attenuate high-frequency signals above 9.0 MHz while preserving lower frequencies...
33020
SKU:
33020
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
9.0 MHz 5-Pole Bessel Low Pass Filter
MPN:
15
Type:
Bessel Low Pass Filter
SKU:
33020
Condition:
Used – Inspected
Seller Notes:
Unit only; no cables or accessories included.
Form Factor:
Enclosed / Benchtop
Filter Type:
Bessel Low Pass
Number of Poles:
5
Cutoff Frequency:
9.0 MHz
Impedance:
50 Ohms
Connector Type:
BNC
Input Connector:
BNC
Output Connector:
BNC
Frequency Range:
Low Pass, cutoff 9.0 MHz
Enclosure Material:
Metal (painted steel/aluminum)
Application:
RF Signal Conditioning, Test & Measurement
Condition Notes:
9.0 MHz 5-Pole Bessel Low Pass Filter inspected and in good used condition. Metal enclosure shows light surface wear; BNC connectors clean and undamaged. Spec label intact and legible.
8.0 MHz 5-Pole Bessel Low Pass Filter — angled front-left view showing teal metal enclosure with BNC input connector and label on top 8.0 MHz Bessel Filter — rear view of input (IN) face showing panel-mount BNC female connector on teal enclosure
Add to Cart
Quick view

8.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$65.00
Was: $125.00
8.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 8.0 MHz Bessel low pass filter configured in a 5-pole topology with a 50-ohm input and output impedance...
33018
SKU:
33018
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
8.0 MHz 5-Pole Bessel Low Pass Filter
Type:
Low Pass Filter
Filter Type:
Bessel
Number of Poles:
5
Cutoff Frequency:
8.0 MHz
Impedance:
50 Ohm
Connector Type:
BNC
Filter Response:
Low Pass
Enclosure:
Yes — metal housing with mounting flanges
Input Connector:
BNC (female)
Output Connector:
BNC (female)
SKU:
33018
Condition:
Used – Inspected
Seller Notes:
Unit only — no additional accessories included.
Condition Notes:
This 8.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good used condition. Metal enclosure shows light surface wear; both BNC connectors appear clean and undamaged. Label intact and legible.
6.5 MHz 5-pole Bessel low-pass filter in blue metal enclosure – top and front quarter view with label and BNC OUT connector visible Bessel low-pass filter – IN port end showing panel-mount BNC female connector labeled IN
Add to Cart
Quick view

6.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$30.00
Was: $60.00
6.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a 5-pole Bessel low-pass filter designed to attenuate frequencies above 6.5 MHz while passing lower frequencies with...
32942
SKU:
32942
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
6.5 MHz 5-Pole Bessel Low Pass Filter
Type:
Bessel Low Pass Filter
SKU:
32942
Condition:
Used – Inspected
Filter Type:
Bessel
Response:
Low Pass
Cutoff Frequency:
6.5 MHz
Number of Poles:
5
Impedance:
50 Ohm
Connector Type:
BNC (female panel-mount, IN and OUT)
Form Factor:
Enclosed / Benchtop
Enclosure Material:
Metal (blue painted aluminum)
Seller Notes:
Filter only; no additional accessories included.
Condition Notes:
This 6.5 MHz 5-pole Bessel low-pass filter has been inspected and is in good used condition. The enclosure shows light wear; both BNC connectors are clean and undamaged. Please contact us with any questions.
6.0 MHz 5-pole Bessel low pass filter in teal metal enclosure – angled front-left view showing BNC output connector and spec label 6.0 MHz Bessel filter – rear IN face with panel-mount BNC input connector on teal metal enclosure
Add to Cart
Quick view

6.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$28.00
Was: $60.00
6.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalA 5-pole Bessel low pass filter designed to attenuate RF signals above 6.0 MHz while maintaining a flat passband response...
33007
SKU:
33007
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
6.0 MHz 5-Pole Bessel Low Pass Filter
Type:
Bessel Low Pass Filter
SKU:
33007
Condition:
Used – Inspected
Cutoff Frequency:
6.0 MHz
Filter Type:
Bessel
Filter Topology:
Low Pass
Number of Poles:
5
Input Impedance:
50 Ohms
Output Impedance:
50 Ohms
Connector Type:
BNC
Form Factor:
Enclosed / Benchtop
Enclosure Material:
Metal
Seller Notes:
Includes filter unit in metal enclosure with BNC IN and BNC OUT connectors.
Condition Notes:
This 6.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good condition. Metal enclosure shows light surface wear. Both BNC connectors are intact with no corrosion. Label is clean and legible.
9.5 MHz 5-pole Bessel low pass filter in blue metal enclosure – angled front-right view showing BNC output connector and label on top 9.5 MHz Bessel low pass filter – end panel view showing BNC input connector labeled IN
Add to Cart
Quick view

9.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal

Bessel

$35.00
Was: $70.00
9.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 9.5 MHz 5-pole Bessel low pass filter in a rugged metal enclosure, with 50-ohm impedance on both the input...
33021
SKU:
33021
Availability:
Usually ships within 1-2 business days.
Weight:
3.00 LBS
Brand:
Unbranded
Model:
9.5 MHz 5-Pole Bessel Low Pass Filter
Type:
Low Pass Filter
Filter Type:
Bessel
Number of Poles:
5
Cutoff Frequency:
9.5 MHz
Impedance:
50 Ohms
Connector Type:
BNC
Filter Topology:
Low Pass
Form Factor:
Enclosed / Benchtop Module
Enclosure Material:
Metal
Condition:
Used – Pulled from Working Environment
SKU:
33021
Seller Notes:
Unit only; no additional accessories included.
Condition Notes:
9.5 MHz 5-pole Bessel low pass filter in good used condition. Enclosure shows light surface wear; BNC connectors intact. Label present and legible. Pulled from working environment.