Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Varian VJW6767D8 Remote Control Unit front panel — dual PA sections with indicator buttons and analog output power meters, RCA label visible upper right Varian VJW6767D8 front panel close-up — PA1 and PA2 sections with labeled indicator/alarm buttons, analog meters, Auto/Manual and PA On/Line selector switches

    Varian VJW6767D8 Remote Control Unit Satellite Station PA Monitor RCA

    Varian

    $125.00
    Was: $250.00
    Varian VJW6767D8 Remote Control Unit Satellite Station PA Monitor RCAThe Varian VJW6767D8 is a rackmount Remote Control Unit built by Varian's Microwave Equipment Division in Santa Clara, California for use in satellite ground station installations. It...
    36027
    SKU:
    36027
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    12.00 LBS
    Brand:
    Varian
    Model:
    VJW6767D8
    MPN:
    VJW6767D8
    Secondary Model:
    112780-00
    SKU:
    36027
    Type:
    Remote Control Unit
    Application:
    Satellite Station Power Amplifier Monitoring
    PA Sections:
    Dual (PA 1 and PA 2)
    Form Factor:
    Rackmount
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Unit only — sold AS-IS for parts or repair
    Country/Region of Manufacture:
    United States
    Manufacturer Division:
    Varian Microwave Equipment Division, Santa Clara CA
    Condition Notes:
    Varian VJW6767D8 Remote Control Unit sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Cosmetically intact with rear wiring harness present. Please view photos and contact us with questions.
    $125.00
    Was: $250.00
  • LNR DC4-D1 Down Converter 4U rackmount chassis front panel showing two DC4-D1 down converter modules and center CONTROL section with mode select, alarm indicators, and BNC connectors LNR DC4-D1 Down Converter 4U aluminum rackmount chassis rear/top view showing ventilation mesh, cooling fans, and power cabling

    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For Parts

    LNR

    $175.00
    Was: $350.00
    LNR DC4-D1 Down Converter 4U Rack Chassis SMI SM7-219-1 Coax Switch For PartsSatellite L-band down converter system in 4U rackmount chassis. Converts RF signals to intermediate frequency for satellite ground station applications. Does not power on; sold...
    36047
    SKU:
    36047
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    LNR Communications
    Model:
    DC4-D1
    MPN:
    DC4-D1
    Secondary Model:
    SM7-219-1
    Type:
    Satellite Down Converter with Coax Switch
    SKU:
    36047
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 2x DC4-D1 down converters, 1x 51029-004112 assembly, 1x 004002-2 4U aluminum chassis, 1x SMI SM7-219-1 coax switch
    Form Factor:
    4U Rackmount
    Chassis Part Number:
    004002-2
    Assembly Part Number:
    51029-004112
    Coax Switch Model:
    SMI SM7-219-1
    Coax Switch Type:
    Baseball-style coax switch
    Dimensions:
    24" x 19" x 7" (4U)
    Rack Size:
    19-inch, 4U
    Country/Region of Manufacture:
    United States
    Application:
    Satellite communications (SATCOM), L-band signal downconversion
    Interface / Connectors:
    BNC, SMA, DB25, DB9 (visible on rear panel)
    Alarm Outputs:
    Summary, RF LO, IF LO, +24 VDC alarm indicators
    Monitor Functions:
    RF LO, IF LO, +24 VDC monitor points
    LO Select:
    INT / AUX switchable
    Control Panel:
    Dedicated CONTROL module with Mode Select and Output Select
    Power Status:
    Does not power on — sold for parts or repair
    Condition Notes:
    LNR DC4-D1 Down Converter does not power on. Sold as-is for parts or repair — no functionality guarantee. Chassis and modules show normal service wear; connectors appear intact. Please contact us with questions.
    $175.00
    Was: $350.00
  • Ericsson Thermistor Bridge Type 4 – three-quarter front-left view showing gray metal enclosure, two analog panel meters, and front knobs Ericsson Thermistor Bridge Type 4 – front-left angle view showing milliammeter and microammeter dials, control knobs, and side ventilation slots

    Ericsson Thermistor Bridge Type 4 Milliammeter Wheatstone Lab Test Instrument

    Tillhor

    $150.00
    Was: $300.00
    Ericsson Thermistor Bridge Type 4 Milliammeter Wheatstone Lab Test InstrumentThe Ericsson Thermistor Bridge Type 4 is a vintage benchtop bridge measurement instrument manufactured by Telefon A.B. L.M. Ericsson of Sweden. It uses a Wheatstone-style bridge...
    36127
    SKU:
    36127
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    36.00 LBS
    Brand:
    LM Ericsson
    Model:
    Type 4
    MPN:
    Type 4
    Type:
    Thermistor Bridge
    SKU:
    36127
    Inventory Number:
    YE600
    Department:
    K
    Seller Notes:
    Sold as-is for parts or repair. Includes the main instrument unit only.
    Country/Region of Manufacture:
    Sweden
    Form Factor:
    Benchtop
    Condition:
    As-Is / For Parts or Not Working
    Measurement Type:
    Thermistor Bridge / Resistance Balance
    Meter 1:
    Milliamperes (Sensitive Research brand meter)
    Meter 2:
    Microamperes (analog panel meter)
    Front Panel Controls:
    Coarse Balance, Fine Balance, Modulator Control, Main Switch, Balance Amplifier
    Front Panel Inputs:
    Thermistor, Socket, External Detector, Main Switch toggle
    Power Input Options:
    AVI 30V; A052 240V; A052 200V (fuse/voltage selector on rear)
    Rear Connectors:
    3-pin round power connector, fuse holder, toggle switch
    Power Supply Type:
    Multi-voltage selector (30V / 200V / 240V)
    Era / Vintage:
    Mid-20th century (est. 1940s–1960s)
    Ownership Plate:
    Tillhor Telefon A.B. L.M. Ericsson, Avd. K, Inv. Nr. YE600
    Condition Notes:
    Ericsson Thermistor Bridge Type 4 sold as-is for parts or repair. Not tested; no functionality guaranteed. Enclosure shows chipping, scratches, and rust on rear panel. Meters and knobs present. Ownership plate intact.
    $150.00
    Was: $300.00
  • General Radio Variac Type 10B TFX-5297 test board front panel — blue panel with dual Variac knobs, fault indicators, and labeled test sections General Radio Variac TFX-5297 enclosure rear view — gray metal cabinet showing ventilation slots, open bottom bay with transformer visible

    General Radio Variac Type 10B M2 Variable Transformer Test Board TFX-5297

    Powerstat

    $200.00
    Was: $400.00
    General Radio Variac Type 10B M2 Variable Transformer Test Board TFX-5297Variable autotransformer test fixture designed for bench-level power distribution and circuit testing. Provides 0–132V AC variable output from 120V AC single-phase input, with...
    36423
    SKU:
    36423
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    28.00 LBS
    Brand:
    General Radio Company
    Model:
    Type 10B
    Secondary Model:
    Type M2
    MPN:
    TFX-5297
    SKU:
    36423
    Type:
    Variable Autotransformer (Variac) in Test Enclosure
    Output Voltage:
    0–132V AC (variable)
    Input Voltage:
    120V AC
    Phase:
    Single Phase
    Variac Series:
    Powerstat / Variac Type M2
    Enclosure / Assembly:
    TFX-5297 Board-Level Test Fixture
    Front Panel Features:
    AC Input Vari-Set knob, Phase-Select (A/B/C/None), AC Meter, Metering switch (Vari/Fixed)
    Additional Controls:
    Current XFMR Vari-Set knob, PWM SD, Contactor, Gen Warn, OV1/OV2/UV Fault indicators
    Test Points:
    SIG GEN IN, GRD, 12VDC N, Neutral, A, B, C banana jacks; PWM OUT, POS 26V IN
    Connector Included:
    Burdy UPC2B25P-4 / M55302/4-03 connector (M8833)
    Calibration:
    Labeled CALIBRATION NOT REQUIRED
    Labels:
    FINAL TEST / BOARD LEVEL panel labels
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Freestanding Enclosure
    Seller Notes:
    Includes wiring harness and Burny connector; sold as pictured with all visible hardware
    Condition Notes:
    General Radio Variac Type 10B (M2) in TFX-5297 test enclosure. Inspected, pulled from a working environment where it was in active use. Shows surface wear and paint chips on enclosure. Panel components appear complete.
    $200.00
    Was: $400.00
  • RG-142 B/U RF coaxial cable OSM26805 full length view showing white PTFE braided jacket and SMA male connectors with yellow identification band Close-up of RG-142 B/U marking printed on white braided PTFE cable jacket

    RG-142 B/U SMA Male RF Coax Cable OSM26805 46 Inch 50 Ohm Microwave Test

    RF

    $15.00
    Was: $30.00
    RG-142 B/U SMA Male RF Coax Cable OSM26805 46 Inch 50 Ohm Microwave TestRG-142 B/U coaxial cable with SMA male connectors on both ends. 50 ohm impedance rated for RF and microwave applications. Part number OSM26805 marked on cable jacket.Specifications...
    36979
    SKU:
    36979
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    OSM26805
    MPN:
    OSM26805
    Type:
    RF Coaxial Cable
    SKU:
    36979
    Cable Type:
    RG-142 B/U
    Connector Type:
    SMA Male
    Impedance:
    50 Ohm
    Cable Length:
    46 Inches
    Jacket Material:
    PTFE (White Braided)
    Application:
    Microwave, RF Test, Signal Interconnect
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. SMA male connectors on both ends. Part number OSM26805 marked on cable.
    Condition Notes:
    RG-142 B/U SMA RF cable OSM26805 sold as-is for parts, no functionality guarantee. Not tested. SMA connectors show oxidation/tarnishing. PTFE jacket appears intact. Please view photos and contact us with questions.
    $15.00
    Was: $30.00
  • RF Cable 200087-003 REV-5 full view – 9-inch braided coaxial jumper with gold-body connector on one end and SMA connector on the other RF Cable 200087-003 – close-up of gold anodized aluminum hex body connector with orange O-ring and white PTFE center pin insulator

    RF Cable 200087-003 REV-5 9 Inch SMA Male to Gold Pin Coaxial Jumper AS-IS

    RF

    $20.00
    Was: $40.00
    RF Cable 200087-003 REV-5 9 Inch SMA Male to Gold Pin Coaxial Jumper AS-ISThis is a 9-inch semi-rigid braided coaxial RF cable assembly, part number 200087-003 REV-5. One end terminates in a stainless steel SMA male connector; the other ends in a gold...
    36980
    SKU:
    36980
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    200087-003
    MPN:
    200087-003
    Revision:
    REV-5
    Type:
    RF Coaxial Cable Assembly
    SKU:
    36980
    Cable Length:
    9 inches (approx. 229 mm)
    Connector 1 Type:
    SMA Male
    Connector 2 Type:
    Gold-Body Center-Pin RF Connector
    Cable Construction:
    Semi-rigid / braided coaxial
    Cable Jacket:
    Silver braided outer shield
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold AS-IS for parts or repair. No functionality guaranteed.
    Condition Notes:
    RF Cable 200087-003 REV-5, 9-inch coaxial jumper sold AS-IS for parts or repair. Not tested; no functionality guaranteed. Visually intact per photos. Contact us with questions.
    $20.00
    Was: $40.00
  • KMW 140223-2 Rev 2 RF coaxial cable assembly full view — braided stainless jacket, SMA male connector at right, gold panel-mount male connector at left KMW 140223-2 close-up of gold-plated panel-mount male RF connector end with white PTFE dielectric and center pin

    KMW 140223-2 Rev 2 RF Coaxial Cable 7in SMA Male Braided Microwave Assembly

    KMW

    $20.00
    Was: $40.00
    KMW 140223-2 Rev 2 RF Coaxial Cable 7in SMA Male Braided Microwave AssemblyThe KMW 140223-2 Rev 2 is a short flexible RF coaxial cable assembly measuring approximately 7 inches in length. It features a braided stainless steel outer jacket for flexibility...
    36981
    SKU:
    36981
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    KMW
    Model:
    140223-2
    MPN:
    140223-2
    Secondary Model:
    Rev 2
    SKU:
    36981
    Type:
    RF Coaxial Cable Assembly
    Connector 1:
    Panel-Mount Male (gold-plated, center pin)
    Connector 2:
    SMA Male
    Cable Length:
    7 inches (approx. 178 mm)
    Cable Jacket:
    Braided stainless steel flexible outer jacket
    Application:
    Microwave / RF Interconnect
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Sold as a single RF cable assembly, no accessories included.
    Condition Notes:
    ⚠️ CONDITION CONFLICT — HUMAN REVIEW NEEDED: Listing coded 'For Parts or Not Working' but prose says 'tested to be in working order.' Verify physical condition before publishing.
    $20.00
    Was: $40.00
  • Light Grid Assembly C15186-1 — front view showing fluorescent lamp tubes in aluminum frame with red and green wire leads Light Grid Assembly C15186-1 — close-up of lamp tubes and foil-wrapped component showing dust and wear

    Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring

    Light Grid Assembly

    $35.00
    Was: $70.00
    Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring Fluorescent lamp grid assembly with aluminum frame and integrated wiring. Contains lamp tubes mounted in a rectangular array configuration with red and green wire leads for...
    36982
    SKU:
    36982
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Unbranded
    Model:
    C15186-1
    MPN:
    C15186-1
    Type:
    Fluorescent Lamp Grid Assembly
    SKU:
    36982
    FSCM:
    02145
    Date Code:
    5/81
    Quantity:
    1 EA
    Condition:
    As-Is / For Parts or Not Working
    Frame Material:
    Aluminum
    Wiring:
    Red and green wire leads included
    Seller Notes:
    Sold AS-IS for parts. Includes lamp tubes and wiring leads in aluminum frame.
    Condition Notes:
    Light Grid Assembly C15186-1 sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Dust and soiling visible on lamp tubes. Aluminum frame intact; wiring leads present. Please review photos and contact us with questions.
    $35.00
    Was: $70.00