Description
Heidenhain EXE 610 C Encoder Interpolation Box 263 383 01 Mask Aligner CNC
The Heidenhain EXE 610 C is an encoder interpolation (subdivision) electronics box used to process and multiply the sinusoidal output signals from Heidenhain linear and rotary encoders into finer position increments. By subdividing the raw encoder signal internally, it delivers higher resolution position data to the connected CNC control or motion system without requiring a higher-resolution encoder. The unit carries Id.Nr. 263 383 01 and is manufactured by Heidenhain in Traunreut, Germany.
Specifications & What's Included
- Manufacturer: Heidenhain (D-83301 Traunreut, Made in Germany)
- Model: EXE 610 C
- Id.Nr. (Part Number): 263 383 01
- Serial Number: 6 806 331 (see rating plate)
- Hardware variant: U3
- CE marked
- Form factor: compact rectangular aluminum enclosure
- Connectors: circular multi-pin connectors on both ends (encoder input and output/control sides)
- Axis designation label: Z AXIS (applied to this unit)
- Pulled from: mask alignment system
- Unit only — no cables or mounting hardware included
Applications
Heidenhain EXE-series interpolation boxes are used in precision motion control systems where high position resolution is required but the base encoder outputs an analog sinusoidal signal. The EXE 610 C subdivides these signals electronically, producing a high-frequency incremental pulse train suitable for CNC machine tool controls, precision linear stages, and photolithography equipment. This particular unit was configured for a mask alignment system — equipment used in semiconductor and microelectronics manufacturing to precisely align photomasks to substrates during photolithography. Mask aligners rely on sub-micron positioning accuracy, and Heidenhain encoder interpolation electronics are a common component in achieving that resolution. The EXE series has been a staple of precision motion systems from the 1980s onward and remains in active use wherever Heidenhain glass-scale or rotary encoders are deployed in CNC, metrology, or semiconductor process equipment.
This Heidenhain EXE 610 C encoder interpolation box (Id.Nr. 263 383 01) has been inspected and is in good used condition. It was pulled from a mask alignment system where it was in active use. The enclosure is clean with only minor surface marks consistent with normal service life. Both circular multi-pin connectors are present and appear undamaged. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Heidenhain |
Model: |
EXE 610 C |
MPN: |
263 383 01 |
Type: |
Encoder Interpolation Box |
SKU: |
36353 |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Unit only; pulled from a mask alignment system |
Country/Region of Manufacture: |
Germany |
Form Factor: |
Standalone Module / External Box |
Application / Use Case: |
Linear/rotary encoder signal interpolation, CNC, mask aligners |
Compatible With: |
Heidenhain linear and rotary encoders, mask alignment systems |
Interface / Connector Type: |
Circular multi-pin connector (both ends) |
Axis: |
Z Axis (label visible on unit) |
Condition Notes: |
Heidenhain EXE 610 C encoder interpolation box, Id.Nr. 263 383 01. Inspected, good used condition. Pulled from a working mask alignment system. Both connectors intact. |
