Description
Nagano Keiki KH15-PT14-C-200 Pressure Transmitter 0-200 kgf/cm² 24V DC 1-5V
The Nagano Keiki KH15-PT14-C-200 is a compact inline pressure transmitter designed for industrial process measurement. It converts hydraulic or pneumatic pressure into a proportional 1–5V DC analog output signal, powered by a 24V DC supply. The unit features a male threaded process connection for direct in-line installation and a 7-pin circular electrical connector for signal and power wiring.
Specifications & What's Included
- Manufacturer: Nagano Keiki Co., Ltd.
- Model / MPN: KH15-PT14-C-200-0.25
- Type: Pressure Transmitter
- Pressure Range: 0–200 kgf/cm²
- Power Supply: 24V DC
- Output Signal: 1–5V DC (analog voltage)
- Electrical Connector: 7-pin circular (MIL-style), rear-mounted
- Process Connection: Male threaded fitting (PT/NPT style), front-mounted
- Body: Cylindrical stainless steel / aluminum construction
- Country of Manufacture: Japan
- Includes: Transmitter unit only — no mating connector or cable included
Applications
Pressure transmitters like the Nagano Keiki KH15 series are used in industrial process control and monitoring applications where continuous pressure measurement and analog signal output are required. The 0–200 kgf/cm² range (roughly 0–2,900 psi / 0–20 MPa) makes this transmitter suitable for hydraulic systems, high-pressure fluid circuits, industrial machinery, and process equipment where pressures well above typical pneumatic ranges need to be measured. The 1–5V DC output is a standard analog signal format compatible with PLCs, data acquisition systems, chart recorders, and process controllers. Nagano Keiki Co., Ltd. is a Japanese manufacturer with a long history supplying pressure measurement instruments to industrial, semiconductor, and factory automation markets. The KH15 series with PT14-style process connections is commonly found in Japanese industrial machinery and semiconductor process equipment.
This Nagano Keiki KH15-PT14-C-200 pressure transmitter has been inspected and appears to be in good used condition. The body and label are intact and legible. The threaded process connection shows some surface oxidation and minor corrosion typical of used industrial hardware. The 7-pin circular electrical connector on the rear appears undamaged. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Nagano Keiki |
Model: |
KH15-PT14-C-200 |
MPN: |
KH15-PT14-C-200-0.25 |
Type: |
Pressure Transmitter |
SKU: |
45521 |
Pressure Range: |
0-200 kgf/cm² |
Power Supply Voltage: |
24V DC |
Output Signal: |
1-5V DC |
Connector Type: |
7-Pin Circular (MIL-style) |
Process Connection: |
Male threaded fitting (NPT/PT style) |
Form Factor: |
Inline / Inline Cylindrical |
Condition: |
Used – Inspected |
Seller Notes: |
Unit only; no cable or connector included. |
Country/Region of Manufacture: |
Japan |
Condition Notes: |
Nagano Keiki KH15-PT14-C-200 pressure transmitter. Inspected, good used condition. Body and label intact; some surface oxidation on the process fitting typical of used industrial hardware. 7-pin connector undamaged. |
