Standard Communication

Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF

(No reviews yet) Write a Review
SKU:
45515
MPN:
MT650
Condition:
Used
Availability:
Usually ships within 1–2 business days.
Weight:
16.00 LBS
Shipping:
Calculated at Checkout
  • Standard MT650 Agile IRD-2 Videocipher II Plus satellite receiver – front panel and rack ears, 1U rackmount chassis
  • Standard MT650 Agile IRD-2 Videocipher II Plus – top and rear view showing ventilation and rear connector panel
  • Standard MT650 Agile IRD-2 Videocipher II Plus – top and rear three-quarter view, rear connector panel and power cord visible
  • Standard MT650 Agile IRD-2 front panel close-up showing SYNC, AUTH, BYPASS, SIGNAL LED indicators and OSD switch
  • Standard MT650 Agile IRD-2 Videocipher II Plus front panel close-up showing OSD, AFC, AGC switches and MGC Control, Video Level knobs
  • Standard MT650 Videocipher II Plus front panel right section showing MGC Control, Video Level, Audio L/R/Mono, Fine Tune controls
  • Standard MT650 front panel right section showing SATELLITE FREQ DIP switch channel selector and access panel with cosmetic wear
  • Standard MT650 Agile IRD-2 rear panel close-up showing VIDEO/OSD TEST BNC outputs – 75 Ohm and 50 Ohm, 70MHz IF labeled
  • Standard MT650 Agile IRD-2 rear panel showing terminal block outputs (DATA, CLOCK, CADBGDC, LEFT, RIGHT, MONO), RF input 950–1450MHz, EXT 70MHz TRAP, LOOP THRU, composite output, video BNC, and 1A 250V power entry
$60.00
Was: $125.00
Current Stock: 1

Sold Out

Description

Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF

1U rackmount integrated receiver descrambler (IRD) for C-band satellite systems. Handles RF input from 950–1450 MHz and outputs 70 MHz IF signal with Videocipher II Plus commercial descrambling capability.

Specifications & What's Included

  • RF input: 950–1450 MHz with loop-through
  • IF output: 70 MHz on 50 Ohm BNC
  • Video output: BNC (rear panel) and composite
  • Audio: Left, Right, Mono on terminal block
  • Front panel: SYNC, AUTH, BYPASS, SIGNAL LEDs; OSD, AFC, AGC controls; DIP-selectable channel
  • Power: 1A at 250V
  • Unit only; power cord included

Applications

Used in commercial VSAT headends and fixed C-band satellite receive stations for decryption and signal processing. The MT650 was deployed in broadcast, cable, and corporate network environments where Videocipher II Plus scrambling was standard. IRD-2 agile tuning supports multi-transponder operations typical of satellite contribution and distribution systems.

Condition: Used
This Standard MT650 Agile IRD-2 Videocipher II Plus satellite receiver has been inspected and is in good condition. The chassis is intact and the front panel labels and gold lettering are clear and legible. The front panel shows light surface wear consistent with normal use, and there is some paint chipping or scuffing on the right side of the front panel near the channel selector access door, as visible in the photos. The rear connector panel and terminal blocks appear complete and undamaged. A power cord is included as seen in the photos. Please view our photo set and contact us if you have any questions.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Brand:
Standard Communications
Model:
MT650
MPN:
MT650
Secondary Model:
Agile IRD-2
Type:
Integrated Receiver Descrambler (IRD)
SKU:
45515
Condition:
Used – Inspected and in Good Condition
Seller Notes:
Unit only; power cord visible in photos. Inspected and in good condition.
Country/Region of Manufacture:
United States
Form Factor:
1U Rackmount
Descrambler System:
Videocipher II Plus (VC II Plus)
Descrambler Type:
Commercial Descrambler Capable
IF Frequency:
70 MHz
RF Input Frequency Range:
950–1450 MHz
Video/OSD Test Output:
75 Ohm BNC
IF Test Output:
50 Ohm BNC, 70MHz IF
Video Output:
BNC (rear panel)
Audio Outputs:
Left, Right, Mono (terminal block)
Data/Clock Output:
Terminal block (DATA, CLOCK, CADBGDC)
Loop Through:
950–1450 MHz RF loop-through
Composite Output:
Yes — rear panel
Power Requirements:
1A 250V (as labeled on rear panel)
Front Panel Indicators:
SYNC, AUTH, BYPASS, SIGNAL LEDs
Front Panel Controls:
OSD, AFC, AGC switches; MGC Control; Video Level; Audio L/R/Mono; Fine Tune
Satellite Freq Selection:
DIP switch (CH # selector on front)
Compatible With:
C-band satellite systems, commercial VSAT headends
Dimensions:
23 x 19 x 2 in (approx., per original listing)
Condition Notes:
Standard MT650 Agile IRD-2 Videocipher II Plus satellite receiver. Inspected and in good condition. Light surface wear on front panel; minor paint chipping near channel selector door visible in photos. Power cord included.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
View AllClose

Related Products

Related Products

Standard MT830 Agile Omni Broadcast satellite receiver – front 3/4 angle view showing rackmount chassis Standard MT830 Agile Omni Broadcast receiver – rear panel view showing RF connectors and wiring
Add to Cart
Quick view

Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control Module

Standard

$55.00
Was: $100.00
Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control ModuleThe Standard MT830 is a rackmount agile satellite receiver designed for broadcast and professional satellite downlink...
45518
SKU:
45518
Availability:
Usually ships within 1-2 business days.
Weight:
24.00 LBS
Brand:
Standard Communications
Model:
MT830
MPN:
MT830
Type:
Ku-Band Agile Satellite Receiver / IRD
SKU:
45518
Condition:
Used – Pulled from Working Environment
Seller Notes:
No control access module included; unit only as shown
Country/Region of Manufacture:
Japan
Form Factor:
Rackmount, 2U
Power Requirements:
120V AC, 60Hz, 70W
Frequency Band:
C-Band and Ku-Band
RF Input:
950 MHz – 1450 MHz (LNB IF input)
LNB Power Output:
20V DC, 300mA Max
External IF:
EXT 70MHz input
Antenna Polarity:
Normal / Reverse switchable
Channel Display:
Green LED numeric channel display
Front Panel Meter:
Analog Signal / C/N / Tune meter
Video Output:
Composite Video Out, Video Out (RCA)
Audio Output:
Multiple audio outputs (screw terminal)
Relay Outputs:
C-Band RF Relay (VER/OUT/HOR), Ku-Band RF Relay
Remote Control:
Remote Control port (multi-pin DIN) on rear
I/O Module:
CRC800CI I/O interface module installed
Format Settings:
Satellite Format, RF Input, Video, Audio x3, Timer/Alarm, Config
Compatible With:
Standard Agile Omni Broadcast satellite receive systems
Fuse Rating:
0.75A, 250V
Note:
TRACE CUT label present on rear panel; no control access module
Condition Notes:
Standard MT830 Agile Omni Ku-Band satellite receiver. Inspected, good used condition. Pulled from working environment. No control access module included. TRACE CUT label on rear. Please see photos.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Standard MT900B Intercontinental Satellite Receiver with CAD930 plug-in module installed – front panel and 19-inch rack ear view Standard MT900B front panel detail showing signal/C-N meter, satellite frequency counter reading 03820, AFC, AGC, System, De-Emphasis, and RF Input controls
Add to Cart
Quick view

Standard MT900B Intercontinental Satellite Receiver CAD930 Module 1U Rackmount

Standard

$250.00
Was: $500.00
Standard MT900B Intercontinental Satellite Receiver CAD930 Module 1U Rackmount1U rackmount satellite receiver designed for receiving and demodulating intercontinental satellite signals. Accepts RF...
39603
SKU:
39603
Availability:
Usually ships within 1–2 business days.
Weight:
20.00 LBS
Brand:
Standard Communications
Model:
MT900B
MPN:
MT900B
Secondary Model:
CAD930
SKU:
39603
Type:
Satellite Receiver
Sub-Series / Product Line:
Intercontinental
Form Factor:
1U Rack Mount
RF Input Frequency Range:
950–1750 MHz (Satellite Antenna RF Input)
IF Frequency:
70 MHz
IF Bandwidth Options:
110, 220, 440, 880 kHz (per CAD930 channel)
De-Emphasis Options:
75 µs, 50 µs, Flat, XPN (per CAD930 channel)
Video Output Format:
525 or 625 line (selectable)
Video Outputs:
#1 Video, #2 Video, Composite Video
LNB Power Output:
24 VDC, 300 mA max (switched)
Ext 70 MHz IF Loop:
External 70 MHz IF loop through (must be connected)
Power Requirements:
115/230/240V AC, 50/60 Hz, 60W
Input Voltage Select:
115V~: 0.8A 250V; 230/240V~: 0.315A 250V
Front Panel Controls:
AFC, AGC, System, De-Emphasis, RF Input A/B, Fine Tune, MGC, Video Level, Composite Level, 70MHz IF BW
Front Panel Meter:
Signal / C/N analog meter with Meter Select switch
Satellite Frequency Display:
4-digit mechanical counter (03820 visible in photos)
Plug-In Module:
CAD930 dual-channel demodulator module (installed)
CAD930 Channel 1 Output Level:
6300 (as set, visible on front roller)
CAD930 Channel 2 Output Level:
6800 (as set, visible on front roller)
Rear Connectors:
BNC (RF/IF/Video/Test), IEC AC inlet, terminal block (alarm/aux/video out)
Video Inversion:
Auto / Override switch on rear panel
Country/Region of Manufacture:
Japan
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes installed CAD930 dual-channel plug-in module and 19-inch rack ears
Condition Notes:
Standard MT900B Intercontinental Satellite Receiver with CAD930 module. Inspected, in good used condition. Pulled from a working environment where it was actively in service. Rack ears included. Please view photos and contact us with questions.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
Scientific Atlanta 7500 CFG Satcom Video Receiver – front panel three-quarter view showing analog meter, power indicator, and installed circuit boards with top cover removed Scientific Atlanta 7500 CFG Video Receiver – rear panel showing AC power supply assembly 229000 with heatsink, audio screw terminal blocks, BNC video outputs, and Scientific-Atlanta branding label
Add to Cart
Quick view

Scientific Atlanta 7500 CFG Satcom Video Receiver Rackmount IF Input BNC

Varian

$125.00
Was: $250.00
Scientific Atlanta 7500 CFG Satcom Video Receiver Rackmount IF Input BNCRack-mount satellite video receiver for TVRO and broadcast downlink applications. Processes intermediate frequency (IF) signals...
31407
SKU:
31407
Availability:
Usually ships within 1-2 business days.
Weight:
25.00 LBS
Brand:
Scientific-Atlanta
Model:
7500 CFG
MPN:
7500 CFG
Type:
Satellite Video Receiver
SKU:
31407
Form Factor:
Rack Mount
Configuration Code:
CFG AAB-BZZ-HZAA
AC Power Supply Assembly:
ASSY 229000
IF Input Impedance:
75 Ohm
Bandwidth:
500 kHz BW (module label visible)
AGC/MGC:
Selectable AGC / MGC
Video Outputs:
Video 1 Output, Video 2 Output (BNC)
Auxiliary Output:
Auxiliary BNC Output
Composite BB Output:
Composite Baseband Out (BNC)
IF Input:
IF Input (BNC)
Down Converter Power Output:
DWN. CONV. PWR. OUT
Audio Outputs:
Program Audio A/B, OPT 1/2/3 Audio (screw terminal)
IF Monitor:
IF Monitor BNC, 75 Ohm
Zero On Noise:
Zero On Noise control present
Bandwidth Select:
BW1 / BW2 selectable
Internal Module:
7500 Video Clamp module (PN 211052 visible)
Condition:
Used – Pulled from Working Environment
Seller Notes:
Includes installed modules and AC power supply assembly 229000
Country/Region of Manufacture:
United States
Application:
Satellite Downlink, TVRO, Broadcast Video Distribution
Condition Notes:
This Scientific-Atlanta 7500 CFG Satcom Video Receiver is in good used condition with normal wear from prior rack use. All rear panel connectors and internal modules are present. Not powered or tested at our facility.
California Prop 65 Warning:
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov