Satcom

Satcom

Satcom, short for satellite communication, refers to the transmission of data, voice, and video through satellite systems. Satcom technology utilizes satellites in geostationary or low earth orbit to provide global coverage for communication purposes. It enables long-distance communication without the need for physical infrastructure on the ground. Satcom is used in various industries such as aviation, maritime, military, and broadcasting for reliable and secure communication. The use of Satcom is expanding rapidly with advancements in technology, offering high-speed internet access, telecommunication services, and remote monitoring capabilities. Satcom plays a crucial role in connecting remote areas and ensuring seamless communication worldwide.

  • 3dbm Inc 70FMO 70 MHz FM Command Modulator — front panel view showing three panel meters and OFF/ON rotary switch 3dbm Inc 70FMO FM Command Modulator — rear panel view showing BNC connectors, circular alarm relay connectors, IEC AC inlet, and hand-drawn wiring diagram

    3dbm Inc 70FMO 70 MHz FM Command Modulator Satcom IF BNC RF Out

    3dbm

    $275.00
    Was: $550.00
    3dbm Inc 70FMO 70 MHz FM Command Modulator Satcom IF BNC RF OutThe 3dbm Inc model 70FMO is a 70 MHz FM Command Modulator designed for satellite ground station and satcom uplink applications. Built by...
    31863
    SKU:
    31863
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    3dbm
    Model:
    70FMO
    MPN:
    70FMO
    Type:
    FM Command Modulator
    SKU:
    31863
    Frequency:
    70 MHz
    Modulation Type:
    FM (Frequency Modulation)
    RF Output Connector:
    BNC
    FM Modulation Input Connector:
    BNC
    Panel Meters:
    RF Power (dBm), Carrier Deviation (MHz), Regulated Supply (VDC)
    Alarm Outputs:
    Lock Alarm Out, RF Level Alarm Out (circular multi-pin connectors)
    Alarm Relays:
    Yes — relay contacts wired per rear-panel diagram
    Carrier Deviation Adjust:
    Rear-panel trim pot (Carrier Dev Increase)
    RF Power Adjust:
    Rear-panel trim pot (RF Power Increase)
    Frequency Adjust:
    Rear-panel trim (Freq Adj)
    Fuse:
    1/2 Amp Slo-Blo
    Form Factor:
    Rackmount
    Power Requirements:
    AC mains (IEC inlet, no power cord included)
    Seller Notes:
    No power cord included. Unit is sold as pictured.
    Country/Region of Manufacture:
    United States
    Application:
    Satellite ground station IF modulation, satcom uplink
    Condition Notes:
    3dbm Inc 70FMO 70 MHz FM Command Modulator. Inspected and in good used condition. Front-panel meters and rotary switch intact. BNC connectors usable. No power cord included. Surface wear on chassis.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • Thomson TH2485B Ku-Band klystron tube – top/front view showing Thomson Tubes Electroniques control panel with UNLOCK/LOCK and TUNE controls, LED channel indicators, and terminal block wiring Thomson TH2485B klystron tube – bottom/rear view showing two circular waveguide output ports, white connector assembly, and RF RADIATION caution label; TH2485B model label visible

    Thomson TH2485B Ku-Band Klystron Tube 17.3-18.1 GHz 12-Channel RF Satcom

    Thomson

    $900.00
    Was: $1,800.00
    Thomson TH2485B Ku-Band Klystron Tube 17.3-18.1 GHz 12-Channel RF SatcomThomson Tubes Electroniques Ku-Band klystron tube for satellite communications RF uplink applications. Operates across 17.3–18...
    31855
    SKU:
    31855
    Availability:
    Usually ships within 2–3 business days. Contact us with any questions prior to purchase.
    Weight:
    151.00 LBS
    Brand:
    Thomson Tubes Electroniques
    Model:
    TH2485B
    MPN:
    TH2485B
    Type:
    Ku-Band Klystron Tube
    SKU:
    31855
    Frequency Range:
    17.3 – 18.1 GHz
    Number of Channels:
    12
    Channel Frequencies (GHz):
    17.300, 17.385, 17.460, 17.530, 17.600, 17.670
    Channel Frequencies 2 (GHz):
    17.740, 17.820, 17.890, 17.960, 18.030, 18.100
    Band:
    Ku-Band
    Application:
    Satellite Communications (Satcom) RF Uplink
    Reference Document:
    DTE 807
    Country/Region of Manufacture:
    France
    Form Factor:
    Rack-mount chassis with integral magnet assembly
    Output Interface:
    Rectangular waveguide (WR-62 / Ku-band)
    Connector Type:
    Waveguide RF output; BNC/coax tuning ports
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Tube pulled from working satcom service. May require slow re-conditioning (re-gassing) before full operation.
    Condition Notes:
    Thomson TH2485B Ku-Band klystron tube pulled from working satcom service, inspected, good physical condition. Has been in storage — tube may need slow re-conditioning (re-gassing) before use. Sold as-is with this noted.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $900.00
    Was: $1,800.00
  • Varian VKU-7791Z8 Ku-Band klystron RF tube – front panel view showing Varian branding, high-voltage warning labels, and connector block Varian VKU-7791Z8 klystron – rear view showing waveguide output port, circular RF output flange, and high-voltage warning labels

    Varian VKU-7791Z8 Klystron RF Tube Ku-Band 1.5kW Satcom 8-Ch 17.3-17.7 GHz

    Varian

    $900.00
    Was: $1,800.00
    Varian VKU-7791Z8 Klystron RF Tube Ku-Band 1.5kW Satcom 8-Ch 17.3-17.7 GHzKu-Band klystron RF power tube rated at 1.5 kW output. Operates across 8 active channels in the 17.341–17.761 GHz range for...
    31849
    SKU:
    31849
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    151.00 LBS
    Brand:
    Varian
    Model:
    VKU-7791Z8
    MPN:
    VKU-7791Z8
    Type:
    Klystron RF Tube
    SKU:
    31849
    Frequency Band:
    Ku-Band
    Frequency Range:
    17.341 – 17.761 GHz (8 active channels)
    Number of Channels:
    8
    Output Power:
    1.5 kW
    Beam Voltage:
    9000 Vdc
    Beam Current:
    0.93 Amps
    Heater Voltage:
    6.5 Vdc
    Heater Current:
    2.5 Amps
    Focus Current:
    N/A
    Body Current No Drive:
    2.0 mA
    Heater Wire Color:
    Yellow
    Heater/Cathode Wire Color:
    White
    Application:
    Satellite Uplink / SATCOM Earth Station
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Pulled from working satcom system; tube may need slow conditioning after storage
    Condition Notes:
    Varian VKU-7791Z8 Ku-Band klystron pulled from a working satcom system. Good physical condition. Note: tube has been in storage and may need slow conditioning (gradual beam voltage ramp-up) before full operation — standard practice for stored
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $900.00
    Was: $1,800.00
  • Fairchild SM220 Satellite Modem front panel view showing modem status indicators and rack mount ears Fairchild SM220 Satellite Modem rear panel showing BNC RF connectors, MOD/DEMOD ports, DB-25 primary input, and AC power inlet

    Fairchild SM220 Satellite Modem 981009-000 Rack Mount Cage w/ PS 2.2 Mbps

    Fairchild

    $100.00
    Was: $200.00
    Fairchild SM220 Satellite Modem 981009-000 Rack Mount Cage w/ PS 2.2 MbpsRack-mounted satellite modem from Fairchild Data Corporation operating at 2.2 Mbps data rate. Includes integrated power supply...
    31792
    SKU:
    31792
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    36.00 LBS
    Brand:
    Fairchild Data Corporation
    Model:
    SM220
    MPN:
    981009-000
    Secondary Model:
    981084-000
    Type:
    Rack Mount Satellite Modem
    SKU:
    31792
    Data Rate:
    2.2 Mbps
    IF Frequency:
    70 MHz
    Form Factor:
    Rack Mount
    Power Requirements:
    125 VAC, 60Hz
    Includes:
    Rack mount cage with internal power supply
    Modulator Section:
    MOD — RF OUT (BNC), MOD OUT, FILTER IN connectors
    Demodulator Section:
    DEMOD — RF IN (BNC), IF connectors
    Primary Input Connector:
    J6 Primary Input (DB-25 style)
    Internal Filter:
    70 MHz BP Filter, Assy 01-CDC0140-X01
    Condition:
    Used – Inspected and Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes rack mount cage with power supply; 70 MHz BP filter internal
    Assembly Drawing:
    Eng Dwg# 981084-000 Rev 3
    Condition Notes:
    Fairchild SM220 Satellite Modem PN 981009-000 inspected and in good used condition. Rack cage and internal power supply included. Normal surface wear. Not bench-tested at our facility. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Fairchild 980842-000 Rev 5 Front Multi-Rate Seq Decoder PCN86360 – angled top view showing full PCB with DIP ICs and edge connector Fairchild 980842-000 Rev 5 Front Multi-Rate Seq Decoder card – reverse angled view showing opposite side of PCB and gold edge connector

    Fairchild 980842-000 Rev 5 Front Multi-Rate Seq Decoder PCN86360 Satcom Card

    Fairchild

    $100.00
    Was: $200.00
    Fairchild 980842-000 Rev 5 Front Multi-Rate Seq Decoder PCN86360 Satcom CardFront-end multi-rate sequence decoder card for satellite communications systems. Processes encoded signal data via RS-422...
    31787
    SKU:
    31787
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Fairchild
    Model:
    980842-000
    MPN:
    980842-000
    Secondary Model:
    PCN86360
    FSCM:
    86360
    Revision:
    Rev 5
    Type:
    Front Multi-Rate Sequence Decoder Card
    Interface Type:
    RS-422
    Form Factor:
    Card/Module
    Application:
    Satellite Communications (Satcom)
    Country/Region of Manufacture:
    United States
    SKU:
    31787
    Condition:
    Used – Inspected
    Seller Notes:
    Card only; inspected and appears in good condition
    Condition Notes:
    Fairchild 980842-000 Rev 5 Front Multi-Rate Seq Decoder card. Inspected and in good condition. Normal handling wear; edge connector clean, components intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Fairchild 98-CDD0190-X Synthesizer PCB card – angled top view showing DIP switches, yellow transformers, and RF shielded modules Fairchild 98CDP0190X01XXXXXXXN Synthesizer card – underside angled view showing edge connector fingers and component side

    Fairchild 98-CDD0190-X Synthesizer Card 98CDP0190X01XXXXXXXN Rev 40 Satcom

    Fairchild

    $50.00
    Was: $100.00
    Fairchild 98-CDD0190-X Synthesizer Card 98CDP0190X01XXXXXXXN Rev 40 SatcomThis is a Fairchild 98-CDD0190-X Synthesizer plug-in PCB card, part number 98CDP0190X01XXXXXXXN, Revision 40. It is a...
    31784
    SKU:
    31784
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Fairchild
    Model:
    98-CDD0190-X
    MPN:
    98CDP0190X01XXXXXXXN
    Secondary Model:
    98CDP0190X01XXXXXXXN
    Type:
    Synthesizer PCB Card / Module
    Revision:
    Rev 40
    SKU:
    31784
    Condition:
    Used – Inspected and Pulled from Working Environment
    Form Factor:
    PCB Card / Plug-In Module
    Application:
    Satellite Communications (Satcom)
    Seller Notes:
    Sold as individual synthesizer card only.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Fairchild 98-CDD0190-X Synthesizer Card 98CDP0190X01XXXXXXXN Rev 40 inspected and in good used condition. PCB and components appear intact with no obvious damage. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $50.00
    Was: $100.00
  • Scientific Atlanta 286426 Rev A IF Filter Amplifier Board 30MHZ Scientific Atlanta 286426 Rev A IF Filter Amplifier Board 30MHZ

    Scientific Atlanta 286426 Rev A IF Filter Amplifier Board 30 MHz Satcom

    Scientific Atlanta

    $110.00
    Was: $225.00
    Scientific Atlanta 286426 Rev A IF Filter Amplifier Board 30 MHz SatcomThe Scientific Atlanta 286426 Rev A is an IF (Intermediate Frequency) Filter Amplifier board designed for use in satellite...
    31636
    SKU:
    31636
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    286426
    MPN:
    286426
    Secondary Model:
    P286426 Rev A
    Type:
    IF Filter Amplifier Board
    SKU:
    31636
    Revision:
    Rev A
    Frequency:
    30 MHz
    Form Factor:
    Card / Module
    Connector Type:
    SMA (gold-plated)
    Interface:
    IF Input, IF Output, Output Monitor
    Features:
    ALC Level Set, Low/High Level Alarms
    Application / Use Case:
    Satellite Communications (Satcom) Ground Equipment
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Board only; pulled from working satcom equipment
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Scientific Atlanta 286426 Rev A IF Filter Amplifier Board, 30 MHz. Inspected and in good used condition. Pulled from a working satcom environment. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • Scientific Atlanta Model 750 ATIS Subcarrier module – front panel and PCB angled view showing RS-232 port, SC/LCL switch, and STATUS/INDICATOR LEDs Scientific Atlanta 750 ATIS Subcarrier – close-up of front panel RS-232 DB-9 female connector and INDICATOR label

    Scientific Atlanta 455247 Model 750 ATIS Subcarrier RS-232 Transmitter ID Module

    Scientific Atlanta

    $45.00
    Was: $90.00
    Scientific Atlanta 455247 Model 750 ATIS Subcarrier RS-232 Transmitter ID ModulePlug-in chassis card module for ATIS (Automatic Transmitter Identification System) subcarrier transmission. This module...
    31613
    SKU:
    31613
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Scientific-Atlanta
    Model:
    750
    MPN:
    455247
    Secondary Model:
    455246
    Type:
    ATIS Subcarrier Transmitter ID Module
    SKU:
    31613
    Interface Type:
    RS-232
    Connector Type:
    DB-9 Female (RS-232)
    FCC ID:
    1204136504
    Function:
    ATIS Transmitter Identification Subcarrier
    Form Factor:
    Card/Module (plug-in chassis card)
    Country/Region of Manufacture:
    United States
    Manufacturer:
    Scientific-Atlanta, Network Systems Group
    Copyright Year:
    1990
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Module only; no chassis included. RS-232 DB-9 port visible and intact.
    Condition Notes:
    Scientific Atlanta Model 750 ATIS Subcarrier (Assy 455247) inspected and in good used condition. Front panel, RS-232 connector, LEDs, and switch intact. Normal aging on PCB. Module only, no chassis.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • Tellabs 6923 2W FXS SF Signaling Set module — angled front and side view showing faceplate label and Tellabs logo Tellabs 6923 circuit board interior — top view showing main PCB components including TN-branded transformer module 37-0001

    Tellabs 6923 826923 2W FXS SF Signaling Set Module Card Telecom

    Tellabs

    $40.00
    Was: $80.00
    Tellabs 6923 826923 2W FXS SF Signaling Set Module Card TelecomThe Tellabs 6923 is a 2-wire FXS (Foreign Exchange Subscriber) single-frequency (SF) signaling set module designed for plug-in...
    31605
    SKU:
    31605
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    Tellabs
    Model:
    6923
    MPN:
    826923
    Secondary Model:
    826923
    SKU:
    31605
    Type:
    2W FXS SF Signaling Set Module
    Interface Type:
    2-Wire FXS (Foreign Exchange Subscriber)
    Signaling Type:
    SF (Single Frequency) Signaling
    Form Factor:
    Plug-In Card / Module
    Front Panel Indicators:
    rcv in, busy, xmt out LED test points
    Front Panel Controls:
    rcv and xmt level adjustment switches (10 to 0dB)
    Connector Type:
    Edge connector (plug-in card); front test jacks
    Compatible With:
    Tellabs carrier telephony / digital cross-connect systems
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Module only; no chassis or external cables included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Tellabs 6923 2W FXS SF Signaling Set module. Inspected and in good used condition. Faceplate, switches, and test jacks intact. PCB shows normal aging. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Tele Systems EC-4543 Echo Canceller W/SF Bypass card — angled front panel view showing RX OUT and TX IN terminal blocks and LED indicators Tele Systems EC-4543 — PCB top view showing full component layout including ICs, capacitors, and transformers; Tele Systems Inc. ASSY label visible

    Tele Systems EC-4543 Echo Canceller W/SF Bypass Telecom Card Module 107690-0015

    Tele Systems

    $40.00
    Was: $80.00
    Tele Systems EC-4543 Echo Canceller W/SF Bypass Telecom Card Module 107690-0015The Tele Systems EC-4543 is an echo canceller card module with Single Frequency (SF) bypass capability, designed for use...
    31602
    SKU:
    31602
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Tele Systems
    Model:
    EC-4543
    MPN:
    107690-0015
    Secondary Model:
    W.O. 02326 Rev B
    SKU:
    31602
    Type:
    Echo Canceller Card Module
    Function:
    Echo Cancellation with SF (Single Frequency) Bypass
    Form Factor:
    Card / Module (rack-mount chassis card)
    Interface — RX:
    RX OUT — terminal block connector
    Interface — TX:
    TX IN — terminal block connector
    Indicators:
    Disabled, Disable, Normal/No Adaptation LED indicators
    PCB Revision:
    Rev B
    Application:
    Voice circuit echo cancellation, satellite & long-haul telecom
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Card only; no chassis or external cables included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Tele Systems EC-4543 Echo Canceller W/SF Bypass card. Inspected and in good used condition. Front panel clean, PCB shows normal handling wear, connectors intact. Card only — no chassis or cables included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • Varian VJC6767D8T7 Switch Control – front panel view showing two pushbuttons, AUTO/LOCAL toggle switch, and power rocker switch Varian VJC6767D8T7 Switch Control – rear panel view showing Varian Microwave Equipment Division labels, multi-pin connectors, and wiring harness

    Varian VJC6767D8T7 Switch Switch Control Rackmount Microwave Equipment Division

    Varian

    $150.00
    Was: $300.00
    Varian VJC6767D8T7 Switch Control Rackmount UnitSwitch control unit from Varian's Microwave Equipment Division. Designed for rackmount installation in microwave systems and test environments...
    31567
    SKU:
    31567
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    Varian
    Model:
    VJC6767D8T7
    MPN:
    VJC6767D8T7
    Secondary Model:
    VJC-6767
    Type:
    Switch / Switch Control Unit
    SKU:
    31567
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Rackmount
    Manufacturer Division:
    Varian Microwave Equipment Division
    Manufacturer Location:
    Santa Clara, California
    Country/Region of Manufacture:
    United States
    Connector J1:
    Multi-pin circular connector (approx. 9-pin)
    Connector J2:
    Multi-pin circular connector (smaller)
    Connector J3:
    BNC-style coaxial connector
    Connector J5:
    Multi-pin rectangular/card-edge connector
    Seller Notes:
    Includes attached wiring harness with two multi-pin connector ends.
    Condition Notes:
    Varian VJC6767D8T7 Switch/Switch Control rackmount unit. Inspected and in good used condition. Pulled from a working environment where it was in active use. Rear connectors and wiring harness intact. Wiring harness included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • LNR UC6-D1 dual C-Band redundant upconverter system front panel view showing two UP CONVERTER modules and center CONTROL section LNR UC6-D1 left upconverter front panel close-up showing alarm indicators, BNC test and monitor ports, LO select, power switch, and 4826.7 MHz / 1042.5 MHz LO frequency labels

    LNR UC6-D1 C-Band Redundant Satcom Upconverter System 004003-1 004003-2

    LNR

    $850.00
    Was: $1,700.00
    LNR UC6-D1 C-Band Redundant Satcom Upconverter System 004003-1 004003-2The LNR Communications UC6-D1 is a dual 1:1 redundant C-Band satellite upconverter system manufactured by LNR Communications Inc...
    31562
    SKU:
    31562
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    75.00 LBS
    Brand:
    LNR Communications
    Model:
    UC6-D1
    MPN:
    004003-1 / 004003-2
    Secondary Model:
    004003-2
    SKU:
    31562
    Type:
    Dual Redundant C-Band Satellite Upconverter System
    Frequency Band:
    C-Band
    Configuration:
    1:1 Redundant (Dual Upconverter + Control)
    Number of Upconverters:
    2
    LO Frequency 1:
    4826.7 MHz
    LO Frequency 2:
    1042.5 MHz
    Carrier Frequency Unit 1:
    6245 MHz (visible on label)
    Carrier Frequency Unit 2:
    6045 MHz (visible on label)
    Power Requirements:
    120V AC, 60Hz
    Form Factor:
    Rackmount
    Dimensions:
    27" x 19" x 7"
    Connector Types:
    BNC, N-Type, D-Sub (D-25)
    Rear Ports:
    IF Norm, IF Cross, RF Norm, RF Cross, Ext Mon, Aux LO
    Front Panel Controls:
    Mode Select (Auto/Manual), Output Select (Normal/Cross), LO Select (Int/Aux), CB Reset
    Front Panel Alarms:
    Summary, RF LO, IF LO, +24 VDC
    Manufacturer Location:
    Hauppauge, New York, USA
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Powers on; unable to fully test
    Seller Notes:
    Includes two UC6-D1 upconverter modules (004003-1, 004003-2) in chassis
    Condition Notes:
    LNR UC6-D1 C-Band redundant upconverter system powers on and front panel indicators light up. Full RF/IF performance not verified beyond power-on. Both modules (004003-1, 004003-2) present. Sold as-is beyond power-on confirmation.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $850.00
    Was: $1,700.00
  • Varian 057513-05 700W TWT Power Supply – front-left three-quarter view showing aluminum chassis and heatsink fins on top Varian 057513-05 700W TWT Power Supply – rear-right three-quarter view showing circular port opening on right side panel

    Varian 057513-05 700 Watt TWT Power Supply Microwave Equipment Division RF

    Varian

    $325.00
    Was: $650.00
    Varian 057513-05 700 Watt TWT Power Supply Microwave Equipment Division RFThe Varian 057513-05 is a 700-watt power supply designed to drive traveling wave tube (TWT) amplifiers used in RF, microwave,...
    31543
    SKU:
    31543
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    35.00 LBS
    Brand:
    Varian
    Model:
    057513-05
    MPN:
    057513-05
    Type:
    TWT (Traveling Wave Tube) Power Supply
    SKU:
    31543
    Power Output:
    700 Watts
    GIF Number:
    GIF 58270
    Manufacturer Division:
    Varian Microwave Equipment Division
    Country/Region of Manufacture:
    United States
    Application:
    RF / Microwave / Satcom TWT Amplifier
    Connector Type 1:
    5-pin circular connector
    Connector Type 2:
    Multi-pin D-sub connector (approx. 24-pin)
    Form Factor:
    Benchtop / Chassis Mount
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair; unable to test. Unit only — no cables included.
    Condition Notes:
    Varian 057513-05 700W TWT Power Supply, used working condition. Aluminum chassis with typical handling marks and wear. Has 5-pin circular and D-sub connectors.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • Varian VJW1454C Channel Select Sub-System – front-right three-quarter view showing black cylindrical housing with top-mounted coaxial connectors and red identification label Varian VJW1454C Channel Select Sub-System – left-side three-quarter view showing cylindrical enclosure, latch hardware, and top RF connectors

    Varian VJW1454C Channel Select Sub-System 01014540-01/A Pittman DC Gear Motors

    Varian

    $150.00
    Was: $300.00
    Varian VJW1454C Channel Select Sub-System 01014540-01/A Pittman DC Gear MotorsChannel select sub-system from Varian's microwave equipment division. Controls RF channel selection in satellite and...
    31542
    SKU:
    31542
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Varian
    Model:
    VJW1454C
    MPN:
    01014540-01/A
    Secondary Model:
    01014430-01/J
    Type:
    Channel Select Sub-System
    SKU:
    31542
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes two Pittman 24VDC DC gear motors: GM9413H838 (38.3:1) and GM9413H839 (127.7:1)
    Country/Region of Manufacture:
    United States
    Motor 1 Model:
    Pittman GM9413H838
    Motor 1 Part Number:
    01014448 Rev. A
    Motor 1 Voltage:
    24 VDC
    Motor 1 Gear Ratio:
    38.3:1
    Motor 2 Model:
    Pittman GM9413H839
    Motor 2 Part Number:
    01014449 Rev. A
    Motor 2 Voltage:
    24 VDC
    Motor 2 Gear Ratio:
    127.7:1
    Number of Motors:
    2
    Motor Voltage:
    24 VDC
    Motor Type:
    DC Gear Motor
    Connector Type:
    D-Sub (25-pin)
    RF Connector Type:
    Coaxial (multiple, top-mounted)
    Manufacturer Division:
    Varian Microwave Equipment Products
    Manufacturer Location:
    Santa Clara, California
    CAGE Code:
    59782
    Application:
    Satellite / Microwave Channel Selection
    Compatible With:
    Varian microwave satellite communication systems
    Condition Notes:
    Varian VJW1454C Channel Select Sub-System in good used condition. Pulled from a working environment. Both Pittman 24VDC DC gear motors (GM9413H838 & GM9413H839) present. Normal wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • BEI 01238 Ku-Band Channel Changer front view showing top-mounted connectors and D-sub port on side BEI 01238 Ku-Band Channel Changer angled top view showing connector posts and housing with surface marks

    BEI 01238 30-710460-001 Ku-Band Channel Changer 6 or 8 Ch D/C 9608 Satcom

    BEI

    $275.00
    Was: $550.00
    BEI 01238 30-710460-001 Ku-Band Channel Changer 6 or 8 Ch D/C 9608 SatcomKu-Band channel changer mechanism for satellite antenna feed switching. Features two DC gear motors with integrated encoders...
    31536
    SKU:
    31536
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    BEI Sensors & Systems
    Model:
    01238
    MPN:
    30-710460-001
    Secondary Model:
    17080/771-05-0002-NC
    Type:
    Ku-Band Channel Changer
    SKU:
    31536
    Frequency Band:
    Ku-Band
    Number of Channels:
    6 or 8 Channel
    Date Code:
    D/C 9608
    Motor 1 Model:
    Pittman GM9413D779
    Motor 1 Voltage:
    24 VDC
    Motor 1 Gear Ratio:
    38.3:1
    Motor 2 Model:
    Pittman GM9413D780
    Motor 2 Voltage:
    24 VDC
    Motor 2 Gear Ratio:
    127.7:1
    Motor Manufacturer:
    Pittman (Penn Engineering & Mfg.)
    Number of Encoders:
    2
    Number of DC Gear Motors:
    2
    Connector Type:
    D-Sub (approx. 37-pin)
    Application:
    Satellite antenna feed channel switching
    Condition:
    Used – Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes 2 Pittman DC gear motors and 2 encoders as installed
    Condition Notes:
    BEI 01238 Ku-Band Channel Changer pulled from a working satcom environment, inspected and in good condition. Both Pittman motors and encoders present. Minor surface scuffing consistent with use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • BEI 01238/30-710460-001 C-Band Satcom Channel Changer – front-left view showing D-sub multi-pin connector on front face and four shaft posts on top BEI C-Band Satcom Channel Changer 01238/30-710460-001 – right-side view showing overall box enclosure and latch detail

    BEI 01238/30-710460-001 C-Band Satcom Channel Changer 12 24 Ch Pittman 24VDC

    BEI

    $125.00
    Was: $250.00
    BEI 01238/30-710460-001 C-Band Satcom Channel Changer 12 24 Ch Pittman 24VDCC-Band satellite communications channel selector module with dual Pittman DC gear motors and encoders. Supports 12 or 24...
    31535
    SKU:
    31535
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    BEI Sensors & Systems
    Model:
    01238/30-710460-001
    MPN:
    01238/30-710460-001
    Secondary Model:
    17080/771-05-0001-NC
    Type:
    C-Band Satcom Channel Changer
    SKU:
    31535
    Number of Channels:
    12 or 24
    Frequency Band:
    C-Band
    Application:
    Satellite Communications (Satcom)
    Motor 1:
    Pittman GM9413D780, 24VDC, 127.7:1 Ratio
    Motor 2:
    Pittman GM9413D779, 24VDC, 38.3:1 Ratio
    Motor Voltage:
    24VDC
    Number of Motors:
    2 DC Gear Motors
    Number of Encoders:
    2
    Date Code:
    D/C 9608
    Connector Type:
    D-Sub (approx. 37-pin) multi-pin connector
    Form Factor:
    Box / Module
    Seller Notes:
    Includes 2 Pittman DC gear motors and 2 encoders as described. No accessories.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    BEI 01238/30-710460-001 C-Band Satcom Channel Changer. Inspected and in good condition; pulled from a working environment where it was in use and functional. Pittman motors and encoders present. Minor surface wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • Varian 110641 panel wattmeter front view showing 0–5W and dBW dual scale with green and red colored range indicator lines and front coaxial input connector Varian 110641 wattmeter rear and side view showing meter movement mechanism, multi-pin terminal connections, and mounting hardware studs

    Varian 110641 Wattmeter Panel Meter 0-5W dBW Scale FS=100uADC RF Power

    Varian

    $40.00
    Was: $80.00
    Varian 110641 Wattmeter Panel Meter 0-5W dBW Scale FS=100uADC RF PowerAnalog panel-mount wattmeter designed for RF power measurement in industrial and telecom applications. Provides simultaneous...
    31534
    SKU:
    31534
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Varian
    Model:
    110641
    MPN:
    110641
    Type:
    Analog Panel Wattmeter
    SKU:
    31534
    Measurement Type:
    RF Power (Watts / dBW)
    Scale Range:
    0–5 Watts / 0–7 dBW (dual scale)
    Full Scale Current:
    FS = 100 uADC
    Display Size:
    1.375 x 2.75 inches
    Scale Markings:
    Watts and dBW dual scale with colored bands
    Connector Type:
    Single coaxial input connector (front)
    Form Factor:
    Panel Mount
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Sold as shown; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Varian 110641 panel wattmeter inspected and in good used condition. Meter face clean and legible, colored range bands intact, connector and terminals undamaged. Minor surface wear on case.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • STS Inc Equalizer 2 front panel view showing INPUTS, FAULTS, TEST POINTS sections and red top cover in 19-inch rack chassis STS Inc Equalizer 2 rear panel showing IEC AC input, two DB-15 connectors (J11, J12), IF IN and IF OUT BNC connectors

    STS Inc Equalizer 2 Satellite IF Equalizer 19" Rackmount 2U EQ1 EQ2 EQ3 Satcom

    STS Inc

    $150.00
    Was: $300.00
    STS Inc Equalizer 2 Satellite IF Equalizer 19" Rackmount 2U EQ1 EQ2 EQ3 Satcom RFThe STS Inc Equalizer 2 is a 19-inch 2U rackmount satellite intermediate frequency (IF) equalizer designed for use in...
    31516
    SKU:
    31516
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    20.00 LBS
    Brand:
    STS
    Model:
    Equalizer 2
    MPN:
    Equalizer 2
    Type:
    Satellite IF Equalizer
    SKU:
    31516
    Form Factor:
    19" Rackmount, 2U
    Number of EQ Channels:
    3 (EQ1, EQ2, EQ3)
    IF Channels / Paths:
    IF IN, IF OUT (BNC connectors)
    Connector Types:
    BNC (IF IN/OUT), DB-15 (J11, J12 rear control)
    Rear Connectors:
    J11 DB-15, J12 DB-15, J1 IF IN BNC, J10 IF OUT BNC
    Fault Indicators:
    EQ1, EQ2, EQ3, IF, Fuse, Fail LEDs on front panel
    Test Points:
    IF Level: EQ1, EQ2, EQ3, +5VDC, GND (front panel)
    Power Requirements:
    115V AC (1/4A fuse) or 220V AC (1/8A fuse)
    Fuse Ratings:
    1/8A at 220V; 1/4A at 115V
    Power Switch:
    Front panel ON/OFF rotary switch with green LED indicator
    Application:
    Satellite ground station IF path equalization, Satcom
    Frequency Band:
    IF (Intermediate Frequency) — Satcom/Microwave
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satcom environment
    Country/Region of Manufacture:
    United States
    Condition Notes:
    STS Inc Equalizer 2 satellite IF equalizer — inspected, in good used condition. Pulled from a working satcom environment. Light surface wear on chassis. Front panel connectors and controls intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • ITM Systems ITM-141Q Dual RF Generator – front and right-side angled view showing front panel with dual LED watt meters, power switch, and schematic diagram ITM Systems ITM-141Q – rear panel view showing four rectangular waveguide output ports with gold flanges and attached AC power cord

    ITM Systems ITM-141Q Dual RF Generator LPA Waveguide Rackmount Satcom

    ITM Systems

    $500.00
    Was: $1,000.00
    ITM Systems ITM-141Q Dual RF Generator LPA Waveguide Rackmount SatcomThe ITM Systems ITM-141Q is a rackmount dual-channel RF generator and power amplifier system designed for satellite communications...
    31510
    SKU:
    31510
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    31.00 LBS
    Brand:
    ITM Systems
    Model:
    ITM-141Q
    MPN:
    ITM-141Q
    Type:
    Dual RF Generator / LPA Amplifier
    SKU:
    31510
    Form Factor:
    Rackmount
    Number of Channels:
    2 (LPA 1, LPA 2)
    Output Type:
    Waveguide RF Output
    Output Indicator:
    Dual LED watt meters (LPA 1, LPA 2)
    Connector Type:
    Waveguide (rectangular, flanged)
    Control Interface:
    Local / Remote / Auto / Manual (front panel)
    Remote Interface:
    DB-15 connector (J1), multi-pin connector (J2)
    Power Connection:
    Standard 3-prong AC line cord
    Front Panel Controls:
    Power switch, Low RF Trip/Reset, LCL/RMT/AUTO/MAN, ON LINE
    Internal Components:
    Dual LPA amplifier chains, waveguide combiner/hybrid, transformer, control PCB
    Application:
    Satellite uplink RF amplification, satcom ground station
    Condition:
    Used – Inspected
    Seller Notes:
    Includes AC power cord. Four waveguide ports on rear panel.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    ITM Systems ITM-141Q Dual RF Generator, inspected and in good used condition. Light surface wear on chassis and front panel; waveguide flanges show typical oxidation. AC power cord included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $500.00
    Was: $1,000.00
  • Varian VJW2731A5 Channel Tuner Control – full front and rear stack view showing rackmount chassis and rear board assembly Varian VJW2731A5 – close-up of front panel channel display window with status labels: PIN INH, UNLOCKED, TUNING, LOCKING, UNLOCKING, LOCKED

    Varian VJW2731A5 Channel Tuner Control Rackmount Satellite VJW-2731 1U

    Varian

    $150.00
    Was: $300.00
    Varian VJW2731A5 Channel Tuner Control Rackmount Satellite VJW-2731 1UThe Varian VJW2731A5 is a rackmount Channel Tuner Control unit designed for satellite ground station and satcom frequency...
    31495
    SKU:
    31495
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    18.00 LBS
    Brand:
    Varian
    Model:
    VJW2731A5
    MPN:
    VJW2731A5
    Secondary Model:
    VJW-2731
    Type:
    Channel Tuner Control
    SKU:
    31495
    Form Factor:
    Rack Mount, 1U
    Power Requirements:
    115V / 230V AC (fuse rated 3A/115V, 1.5A/230V)
    Fuse Rating:
    3A/115V, 1.5A/230V
    Interface / Connectors:
    DB25 (J1), Multi-pin circular (J3), TB1 terminal block
    Terminal Block:
    TB1, positions 1–6
    Front Panel Controls:
    Numeric keypad (0–9), CHAN, FREQ, CLR, ENT buttons
    Front Panel Indicators:
    Fuse Alarm LED, Channel display window, status labels
    Status Indicators:
    PIN INH, UNLOCKED, TUNING, LOCKING, UNLOCKING, LOCKED
    Country/Region of Manufacture:
    Canada
    Application:
    Satellite channel tuning and frequency control
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; inspected and in good condition.
    Condition Notes:
    Varian VJW2731A5 Channel Tuner Control. Inspected and in good condition. Front keypad, display window, connectors, and terminal block appear intact and undamaged. Normal light wear from prior rack use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00