Satcom

Satcom

Satcom, short for satellite communication, refers to the transmission of data, voice, and video through satellite systems. Satcom technology utilizes satellites in geostationary or low earth orbit to provide global coverage for communication purposes. It enables long-distance communication without the need for physical infrastructure on the ground. Satcom is used in various industries such as aviation, maritime, military, and broadcasting for reliable and secure communication. The use of Satcom is expanding rapidly with advancements in technology, offering high-speed internet access, telecommunication services, and remote monitoring capabilities. Satcom plays a crucial role in connecting remote areas and ensuring seamless communication worldwide.

  • Miteq DN8000/10268 RF Satcom Downconverter – front panel three-quarter view showing Local Oscillator Status indicators and POWER button Miteq DN8000/10268 Downconverter – front panel close-up showing MITEQ INC. Hauppauge N.Y. logo and Local Oscillator Status panel with Phase Voltage, Out of Lock, and Freq & Power indicators

    Miteq DN8000/10268 RF Satcom Downconverter 2.2-2.3 GHz 70MHz IF w/ LPNF-20

    Miteq

    $175.00
    Was: $350.00
    Miteq DN8000/10268 RF Satcom Downconverter 2.2-2.3 GHz 70MHz IF w/ LPNF-20Satellite communication downconverter that converts RF signals in the 2.2–2.3 GHz band to a 70 MHz intermediate frequency...
    39412
    SKU:
    39412
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    25.00 LBS
    Brand:
    Miteq
    Model:
    DN8000/10268
    MPN:
    DN8000/10268
    Secondary Model:
    LPNF-20
    SKU:
    39412
    Type:
    RF Satellite Downconverter
    RF Input Frequency:
    2.2–2.3 GHz
    IF Output Frequency:
    70 MHz
    LO Reference Frequency:
    118.614580 MHz
    RF Input Port:
    J1 – RF Input 4198.5 MHz (SMA connector)
    IF Output Port:
    J2 – IF Output 70 MHz (BNC connector)
    Alarm/Control Port:
    J3 – Summary Alarm (multi-pin circular)
    Power Requirements:
    120 VAC, 1A
    Local Oscillator Module:
    Miteq XTO-01-118.614580-20P, 118.614580 MHz
    Low Noise Filter Module:
    Miteq LPNF-20
    Phase Lock Module:
    Miteq PLM-4269.625A-20P-5942
    Amplifier Module:
    Miteq AM-1039M-7924
    Power Supply Module:
    Miteq PS-120-HC24-2.4-10268
    Additional Module:
    Miteq M45-2A-0150M-20P
    Front Panel Indicators:
    Phase Voltage, Out of Lock, Freq & Power (LO Status)
    Front Panel Controls:
    TUNE adjust; POWER push on/off; test points +20V, GND
    Form Factor:
    Rackmount
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes internal Miteq modules: LPNF-20, XTO-01-118.614580-20P, PLM-4269.625A-20P-5942, AM-1039M-7924, PS-120-HC24-2.4-10268
    Condition Notes:
    Miteq DN8000/10268 RF Satcom Downconverter inspected and in good condition. Pulled from a working environment where it was actively in use. All internal Miteq modules present. Minor cosmetic wear only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • SSEL Hughes 7746600-100 Satellite Command Generator VME rack front panel with status indicators and power supply status LEDs SSEL Command Generator front panel PWR SUPPLY STATUS section showing +12V, -12V, +5V indicator lights and banana jack test points all illuminated green

    SSEL Hughes 7746600-100 Satellite Command Generator VME Rack 7746604-100

    Hughes

    $2,200.00
    Was: $4,400.00
    SSEL Hughes 7746600-100 Satellite Command Generator VME Rack 7746604-100 7U VMEbus rackmount chassis designed for satellite ground station command and control operations. Houses five VME cards for...
    39399
    SKU:
    39399
    Availability:
    Usually ships within 3-5 business days due to size and packaging requirements.
    Weight:
    61.00 LBS
    Brand:
    SSEL (Satellite Support Equipment Laboratories)
    Model:
    7746600-100
    MPN:
    7746600-100
    Secondary Model:
    7746604-100
    Firmware Part Number:
    7729349-100
    Type:
    Satellite Command Generator VME Rack
    SKU:
    39399
    Form Factor:
    Rackmount, 7U
    Rack Units:
    7U
    Bus Architecture:
    VME (VMEbus)
    Included Card 1:
    Force Computers SYS68K CPU-4VC, P/N 100413
    Included Card 2:
    Motorola VMEmodule MVME 335, P/N 01-W3530B
    Included Card 3:
    Tone Analog, P/N 7729257 / 7729257-099
    Included Card 4:
    RZ Tone Digital, P/N 7742917
    Included Card 5:
    Utility, P/N 7742911
    Power Supply:
    Lambda LND-Y-152, 105-127V or 210-250V AC, dual output
    Power Supply Input:
    105-127 VAC or 210-250 VAC, 47-63 Hz
    Power Supply Output:
    +12V, -12V, +5V DC (banana jack test points on front)
    Rear Connectors:
    D-sub (J6-J9), BNC tone output (J3-J5), IEC AC inlet
    Rear Interfaces:
    Computer J6, Backup J7, CED J8, TCDU J9, ICU J10, Status J11
    Tone Output Connectors:
    BNC: RZ1 (J3), RZ2 (J4), SGLS (J5)
    Command Trigger:
    BNC connector J2 (rear panel)
    Front Panel Indicators:
    Unit Status: uP, Omni Ready, Incremental Commanding, Back-Up Commanding, Self-Test; Activity: Computer, CED
    Dimensions:
    25" L x 19" W x 12.25" H
    Application:
    Satellite ground station command and control
    Compatible With:
    Hughes / SSEL satellite ground support systems
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Powers On, Not Fully Tested
    Seller Notes:
    VME rack loaded with all cards listed. Powers on and lights up.
    Condition Notes:
    SSEL Hughes 7746600-100 Satellite Command Generator VME rack powers on and front panel LEDs illuminate. Not fully tested at our facility. All 5 VME cards present. Good cosmetic condition. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,200.00
    Was: $4,400.00
  • ComStream CM701 PSK Digital Satellite Modem front panel and rackmount chassis, 2U form factor with LCD display showing Config Monitor Fault menu ComStream PSK Digital Modem CM701 nameplate label close-up on front panel bezel

    ComStream CM701 PSK Digital Satellite Modem 140 MHz Modulator Demodulator

    Comstream

    $110.00
    Was: $225.00
    ComStream CM701 PSK Digital Satellite Modem 140 MHz Modulator Demodulator RackmountPSK digital satellite modem for modulation and demodulation at 140 MHz intermediate frequency. 2U rackmount unit...
    39394
    SKU:
    39394
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    25.00 LBS
    Brand:
    ComStream
    Model:
    CM701
    MPN:
    CM701
    Type:
    PSK Digital Satellite Modem
    SKU:
    39394
    Condition:
    Used – Powers On, Limited Testing
    Form Factor:
    Rackmount 2U
    Power Requirements:
    100-240V AC, 60-50 Hz, 1.0A, 90W
    Modulation Type:
    PSK (Phase Shift Keying)
    IF Frequency:
    140 MHz
    Modulator IF Frequency:
    140 MHz
    Demodulator IF Frequency:
    140 MHz
    Symbol Rate:
    Variable
    Features:
    Doppler Buffer, Monitor & Control (M&C)
    Front Panel:
    LCD display, Config/Monitor/Faults menu, Rx Sync, Tx Enable indicators
    Rear Connectors:
    BNC: J3 TxIF, J4 Tx Loopback, J5 RxIF, J6 Rx Loopback, J7 AGC Monitor
    Interface Ports:
    DB9 serial ports (rear), IEC AC inlet, rear expansion slot
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; no accessories included. Powers on and front panel illuminates.
    Condition Notes:
    ComStream CM701 PSK Digital Satellite Modem powers on and front panel lights up; further testing was not performed. Sold as-found. Light cosmetic wear from prior rack use. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • ComStream CM701 PSK Digital Modem front panel and full chassis — 2U rackmount with LCD display showing Config Monitor Faults menu ComStream PSK Digital Modem CM701 — close-up of front panel nameplate label

    ComStream CM701 PSK Digital Modem 140MHz Modulator Demodulator DS-1 Satcom

    Comstream

    $120.00
    Was: $250.00
    ComStream CM701 PSK Digital Modem 140MHz Modulator Demodulator DS-1 SatcomPSK digital satellite modem for DS-1 data link transmission. 2U rackmount unit with 140 MHz modulator and demodulator for...
    39383
    SKU:
    39383
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    28.00 LBS
    Brand:
    ComStream
    Model:
    CM701
    MPN:
    CM701
    Type:
    PSK Digital Satellite Modem
    SKU:
    39383
    Condition:
    Used – Powers On, Further Testing Not Performed
    Form Factor:
    2U Rackmount
    Power Requirements:
    100-240V AC, 60-50Hz, 1.0A, 90W
    Modulation Type:
    PSK (Phase Shift Keying)
    Modulator Frequency:
    140 MHz
    Demodulator Frequency:
    140 MHz
    Symbol Rate:
    Variable
    Interface Type:
    DS-1 Balanced
    Framing:
    DS-1 Balanced Framing Unit
    Monitor and Control:
    M&C (Monitor & Control) Framing Unit
    Doppler Buffer:
    Yes
    Front Panel Display:
    LCD — Config, Monitor, Faults menus
    Rear Connectors:
    BNC (J3 TxIF, J4 TxLoopback, J5 RxIF, J6 Rx Loopback)
    Rear Data Connectors:
    DB-style: ESC Audio/Revenue, ESC Data, Backwards Alarm, Alarm
    Additional Rear Ports:
    RS-232/DB-9 ports, IEC AC inlet, power switch
    AGC Monitor:
    J7 AGC Monitor port on Demodulator card
    Country/Region of Manufacture:
    United States
    Application:
    Satellite communications, VSAT, DS-1 data links
    Seller Notes:
    Unit only — no additional accessories observed. Powers on.
    Condition Notes:
    ComStream CM701 PSK Digital Modem powers on and LCD illuminates. Full function not tested at our facility. Chassis shows normal wear. Rear connectors and card modules appear intact. Sold as used satcom equipment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $120.00
    Was: $250.00
  • 3dbm Inc 70MDF-BRZ FM Modulator – front-right three-quarter view showing front panel with Tone Monitor, RF Monitor, FM Modulator Fault indicator, and Operate/Calibrate controls 3dbm Inc 70MDF-BRZ FM Modulator – rear-left three-quarter view showing IEC AC input, fuse holder, AC ON/OFF switch, BNC connectors, and DB9 port

    3dbm Inc 70MDF-BRZ 70MHz FM Modulator RF Monitor Tone Monitor Satcom

    3dbm Inc.

    $325.00
    Was: $650.00
    3dbm Inc 70MDF-BRZ 70MHz FM Modulator RF Monitor Tone Monitor Satcom70MHz FM modulator with integrated RF monitor and tone monitor capabilities. Designed for satellite communications IF modulation...
    39377
    SKU:
    39377
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    7.00 LBS
    Brand:
    3dbm
    Model:
    70MDF-BRZ
    MPN:
    70MDF-BRZ
    Secondary Model:
    70MDF-FM-BRZ
    Type:
    FM Modulator with RF Monitor and Tone Monitor
    SKU:
    39377
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes internal 70MDF-EQ-BRZ-M equalizer module
    Center Frequency:
    70 MHz
    Modulation Type:
    FM (Frequency Modulation)
    Connector Type:
    BNC, SMA, DB9
    Rear Connectors:
    J1 Tone Input (BNC), J2 Main RF Output (BNC), J3 Range Calib RF Output (BNC), J4 DB9, J5 AC Input
    Front Panel Features:
    Tone Monitor, RF Monitor, FM Modulator Fault indicator, Operate/Calibrate switch
    Fuse Rating:
    2A
    Power Input:
    AC (IEC inlet, fused 2A)
    Form Factor:
    Benchtop / Rack Module
    Internal Module:
    3dbm Inc Equalizer 70MDF-EQ-BRZ-M
    Application:
    Satellite Communications (Satcom) IF Modulation
    Country/Region of Manufacture:
    United States
    Condition Notes:
    3dbm Inc 70MDF-BRZ 70MHz FM Modulator in good used condition. Pulled from a working satcom environment where it was in use and functional. Enclosure shows light wear. All connectors and controls intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • FMT CMD/RNG Select Unit front panel three-quarter view showing rackmount chassis and front-panel push-button selector switches FMT CMD/RNG Select Unit front panel close-up showing RTP IN, LM TONES, RNG/CMD, and SCG/CG labeled selector buttons

    FMT CMD/RNG Select Unit 12-Port BNC Video Switcher RF Modulation Satcom Rack

    FMT

    $150.00
    Was: $300.00
    FMT CMD/RNG Select Unit 12-Port BNC Video Switcher RF Modulation Satcom RackThe FMT CMD/RNG Select Unit is a rackmount signal routing switcher used in satellite ground system installations to direct...
    39365
    SKU:
    39365
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    14.00 LBS
    Brand:
    Unbranded
    Model:
    CMD/RNG Select Unit
    MPN:
    2586-BA
    Type:
    Video Select Switcher / RF Signal Router
    SKU:
    39365
    Condition:
    Used – Pulled from Working Environment
    Number of Ports:
    12 BNC + 1 D-Sub (J14)
    Connector Type:
    BNC (J2–J13), D-Sub 25-pin (J14), IEC AC inlet (J1)
    Power Requirements:
    120 VAC, 1A, 47–440Hz
    Power Entry Module:
    Corcom 6VM1S F7361A, 6A 120V 47-440Hz
    Internal Relay:
    R30D-E1Z4-24V, 24VDC coil
    Form Factor:
    Rackmount (2U approx.)
    Front Panel Functions:
    RTP IN: T&C RNG, XPNDR RNG; RTP LM TONES; RNG/CMD; SCG/CG
    Signal Routing:
    Inputs to FM Modulators via BNC
    Application:
    Satellite command/ranging signal routing to FM modulators
    Hardware Revision:
    REV 1
    Seller Notes:
    Unit only; no cables or accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    FMT CMD/RNG Select Unit BNC video switcher. Inspected, good used condition. Pulled from a working satcom environment. All BNC ports and front-panel switches appear intact. See photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Vertex RSI DCS3-002-1-243 C-Band Downconverter – front-left three-quarter view showing 1U rackmount chassis Vertex RSI DCS3-002-1-243 front panel close-up showing LCD display reading SCD107 and SOFTWARE REV LCL, ALARM LED, and Downconverter label

    Vertex RSI DCS3-002-1-243 C-Band Downconverter 4372.5-5258.5 MHz Satcom 1U

    Vertex RSI

    $175.00
    Was: $350.00
    Vertex RSI DCS3-002-1-243 C-Band Downconverter 4372.5-5258.5 MHz Satcom 1UC-Band satellite downconverter for receive applications in ground station installations. Converts C-Band frequencies (4372...
    39345
    SKU:
    39345
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    16.00 LBS
    Brand:
    Vertex RSI
    Model:
    DCS3-002-1-243
    MPN:
    DCS3-002-1-243
    Secondary Model:
    ISS-2000-5318-1A
    Customer Part Number:
    A13249-5318-1A
    CTI Part Number:
    ISS-2000-5318-1A
    SKU:
    39345
    Type:
    C-Band Satellite Downconverter
    Frequency Range:
    4372.5 - 5258.5 MHz
    Frequency Band:
    C-Band
    Form Factor:
    1U Rackmount
    Power Requirements:
    90-250V AC, 2A, 47-63 Hz
    Interface Type:
    RS-232, D-Sub (DB-15), BNC RF/IF Monitor
    Front Panel:
    LCD display, numeric keypad, LCL/ENT/MENU keys, ALARM LED
    Rear Connectors:
    IEC AC inlet, DB-9 (J4/J5), DB-15 (J6), BNC (J2/J3), GND
    Software Revision:
    SCD107 (visible on front LCD)
    CAGE Code:
    59530
    Work Order:
    32260
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satcom installation
    Country/Region of Manufacture:
    United States
    Application:
    Satellite ground station, C-Band receive chain
    Condition Notes:
    This Vertex RSI DCS3-002-1-243 C-Band Downconverter is in good used condition. Pulled from a working satcom installation where it was in active use. Chassis shows normal surface wear. Front panel and rear connectors intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Hughes 3582710-100-1 Westar FM Data Detector – front three-quarter view showing rackmount chassis, Hughes logo, and front panel controls Hughes FM Data Detector front panel close-up showing PS1, MIP, and EX status indicator LEDs

    Hughes 3582710-100-1 Westar FM Data Detector Satellite Ground Station TM

    Hughes

    $200.00
    Was: $525.00
    Hughes 3582710-100-1 Westar System FM Data Detector Satellite Ground Station TM The Hughes 3582710-100-1 is an FM Data Detector built by Hughes Aircraft Company's Satellite Ground Equipment Division...
    39340
    SKU:
    39340
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Hughes Aircraft
    Model:
    3582710-100-1
    MPN:
    3582710-100-1
    Type:
    FM Data Detector
    SKU:
    39340
    System:
    Westar
    Division:
    Hughes Satellite Ground Equipment Division
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; inspected and in good condition. See photos for connector and control details.
    Form Factor:
    Rackmount
    Front Panel Indicators:
    PS1, MIP, EX status LEDs
    Front Panel Controls:
    Nutation Offset knob, Nutation Gain switch (100Hz/V, 1kHz/V), Nutation/Earth button
    Connector - Input:
    J1: Composite TM IN (BNC)
    Connector - Output 1:
    J2: Detected TM Data OUT (D-sub)
    Connector - Output 2:
    J3: PSI OUT (BNC)
    Analog Data Output:
    Analog Data output on front panel
    Power:
    AC Power with ON/OFF toggle switch and GND terminal
    Application:
    Westar satellite ground station telemetry data detection
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Hughes 3582710-100-1 Westar FM Data Detector. Inspected and in good condition. Light wear from prior rack use. Front panel controls, LEDs, and connectors intact. Rear BNC/D-sub connectors undamaged. Interior boards and wiring appear clean.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $525.00
  • Microdyne 1400-MR Telemetry Receiver front panel three-quarter view showing PM Demodulator, IF Filter Amplifier, and RF Tuner modules installed in 4U rackmount chassis Microdyne 1400-MR Telemetry Receiver rear three-quarter view showing heatsink assembly, BNC connectors, RS-232 port, accessory port, and AC power inlet

    Microdyne 1400-MR 106-912-01 Telemetry Receiver PM Demod RF Tuner 50-90MHz 4U

    Microdyne

    $525.00
    Was: $1,100.00
    Microdyne 1400-MR 106-912-01 Telemetry Receiver PM Demod RF Tuner 50-90MHz 4URack-mount telemetry receiver designed for satellite and RF signal demodulation across the 50–90 MHz band. Processes...
    39335
    SKU:
    39335
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    60.00 LBS
    Brand:
    Microdyne
    Model:
    1400-MR
    MPN:
    106-912-01
    Secondary Model:
    1400-MRA
    Type:
    Telemetry Receiver
    SKU:
    39335
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes PM Demodulator 1451-D, IF Filter Amp 1420-I, RF Tuner 1411-VT(70)
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rack Mount, 4U, 19-inch
    Power Requirements:
    120V AC, 50–60 Hz, 1.5A SLC-BLC
    RF Frequency Range:
    50–90 MHz (VT Tuner)
    Plugin Module 1:
    PM Demodulator – 1451-D
    Plugin Module 2:
    IF Filter Amplifier – 1420-I Series
    Plugin Module 3:
    RF Tuner – 1411-VT(70), 50–90 MHz
    Interface / Connectivity:
    RS-232 (J2G), Accessory Port (J2C), BNC outputs
    Demodulation Modes:
    FM, PM, AFC, VFO, XTAL, 2nd LO
    Bandwidth Options:
    0.100, 0.500, 1.00 MHz, N/U
    Output Types:
    AM, SDU, Record, Pre-D, CFM, Video, AGC
    PROM Config Date:
    4-17-90
    PROM Part Number:
    106-261-77
    Application:
    Satellite / SatCom / Microwave / RF Telemetry
    Compatible With:
    19-inch EIA standard rack enclosures
    Loop Width Settings:
    2B, 30, 100, 300, 1K, 3K, 10K Hz
    Condition Notes:
    Microdyne 1400-MR Telemetry Receiver pulled from a working environment where it was in active use and functional. Inspected and in good used condition. All three plugin modules present. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $525.00
    Was: $1,100.00
  • 3dbm 70MDF-DAT-GLW dual-channel satcom modulator front panel view showing three plug-in modules in 19-inch rack chassis 3dbm 70MDF-DAT-GLW rear panel view showing BNC connectors, IEC AC input, DB9 serial ports, and AC power switch on two modulator plug-ins

    3dbm 70MDF-DAT-GLW Dual-Channel 70MHz FM Satcom Signal Modulator 19" Rack

    3dbm

    $375.00
    Was: $750.00
    3dbm 70MDF-DAT-GLW Dual-Channel 70MHz FM Satcom Signal Modulator 19" RackA dual-channel 70MHz FM satcom signal modulator in 19" rack-mount form factor. This unit modulates baseband signals onto a...
    39334
    SKU:
    39334
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    35.00 LBS
    Brand:
    3dbm
    Model:
    70MDF-DAT-GLW
    MPN:
    70MDF-DAT-GLW
    Secondary Model:
    70MDF-GLW / 50AT-1-2R
    Type:
    Dual-Channel 70MHz FM Satcom Signal Modulator
    SKU:
    39334
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    19" Rack Mount Chassis
    Number of Channels:
    2
    Modulation Type:
    FM (Frequency Modulation)
    Center Frequency:
    70 MHz
    Plug-In Module 1:
    3dbm 70MDF-GLW FM Modulator
    Plug-In Module 2:
    3dbm 50AT-1-2R Dual RF Attenuator
    Plug-In Module 3:
    3dbm 70MDF-GLW FM Modulator
    Internal Sub-Assembly 1:
    3DBM INC. 70MDF-GLW-MOD 70MHz FM Modulator
    Internal Sub-Assembly 2:
    3DBM INC. 70MDF-GLW-EQ Equalizer
    RF Connector Type:
    BNC (Tone In, Main RF Out, Range Calib RF Out)
    Serial Interface:
    DB9 (J4, J5 — RS-232 control)
    AC Power Connector:
    IEC C14 (J6 – AC Input) with fuse pull
    Front Panel Controls:
    Operate/Calibrate, Equalize/Linear switches; LED indicators
    RF Attenuation Control:
    Dual rotary attenuators: FM Modulator 1 & 2 RF Attenuation
    Rear Connections per Module:
    Tone Input (J1), Main RF Output (J2), Range Calib RF Out (J3)
    Attenuator Module Ports:
    RF 1 In (J1), RF 1 Out (J2), RF 2 In (J3), RF 2 Out (J4)
    Application:
    Satellite Ground Station / Satcom Uplink Signal Modulation
    Seller Notes:
    Includes 19" chassis with two 70MDF-GLW modulator plug-ins and one 50AT-1-2R dual attenuator plug-in.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    3dbm 70MDF-DAT-GLW dual-channel 70MHz FM satcom modulator. Inspected, in good condition. Pulled from a working environment where it was in active use and functional. All three plug-ins present. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $375.00
    Was: $750.00
  • Hughes 3899311-100 Westar Range Tone Processor — three-quarter front-left view showing open top cover and internal PCB assembly Hughes 3899311-100 Range Tone Processor — straight-on front panel view showing Mode, Input, OSC, Tones buttons and Phase Count display

    Hughes 3899311-100 Westar VII Range Tone Processor Rackmount Satcom

    Hughes

    $150.00
    Was: $300.00
    Hughes 3899311-100 Westar VII Range Tone Processor Rackmount SatcomRange tone processor designed for Westar VII satellite ground equipment. Generates and measures tone frequencies for satellite...
    39329
    SKU:
    39329
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    35.00 LBS
    Brand:
    Hughes Aircraft
    Model:
    3899311-100
    MPN:
    3899311-100
    Type:
    Range Tone Processor
    SKU:
    39329
    System:
    Westar VII
    Revision:
    Rev A
    Division:
    Satellite Ground Equipment Division
    Form Factor:
    Rack Mount
    Tone Frequencies:
    27777, 3472, 434, 54.25 Hz
    Front Panel Controls:
    Mode, Input, OSC, Measure, Tones, Phase Count display
    OSC Modes:
    Internal / External
    Input Modes:
    Normal / Test
    Mode Options:
    Computer / Manual; Master / Slave
    EXT OSC IN:
    BNC connector on front panel
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. Does not power on. Unit only, no accessories.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Hughes 3899311-100 Westar VII Range Tone Processor does not power on. Tested at our facility — failed to power up. Sold as-is for parts or repair only. No functionality guaranteed. Please see photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • 3dbm 70MDF-DAT-BRZ dual port RF satcom FM modulator plugin chassis – front panel overview with three installed plugin modules 3dbm 70MDF-BRZ FM modulator plugin front panel close-up showing Tone, RF monitor BNC connectors, FM Modulator indicator, Operate/Calibrate switch, and green status LEDs

    3dbm 70MDF-DAT-BRZ Dual Port RF AM Satcom FM Modulator Plugin Chassis 70MDF-BRZ

    3dbm

    $425.00
    Was: $850.00
    3dbm 70MDF-DAT-BRZ Dual Port RF AM Satcom FM Modulator Plugin Chassis 70MDF-BRZThe 3dbm 70MDF-DAT-BRZ is a dual-port RF AM satcom modulator system built around a rackmount plugin chassis manufactured...
    39328
    SKU:
    39328
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    35.00 LBS
    Brand:
    3dbm
    Model:
    70MDF-DAT-BRZ
    MPN:
    70MDF-DAT-BRZ
    Secondary Model:
    70MDF-BRZ
    SKU:
    39328
    Type:
    Dual Port RF AM Satcom FM Modulator Plugin Chassis
    Condition:
    Used – Inspected and Tested
    Plugin 1 Model:
    70FMO-DL-1-3-A-1 FM Modulator
    Plugin 2 Model:
    50AT-1-2R RF Attenuator
    Plugin 3 Model:
    70MDF-BRZ FM Modulator/Controller
    Included Component:
    JFW Industries 50DR-003 RF component (internal)
    Form Factor:
    Rackmount Plugin Chassis
    Number of Plugin Slots:
    3
    Signal Type:
    RF AM / FM
    Application:
    Satellite Communications (Satcom) Uplink
    Rear Connectors - FM Modulator:
    BNC RF Out (J5), BNC MOD IN (J6), DB9 Status (J7), AC Power (J8)
    Rear Connectors - Attenuator:
    BNC RF1 Input (J1), BNC RF1 Output (J2), BNC RF2 Input (J3), BNC RF2 Output (J4)
    Rear Connectors - Main Module:
    BNC Tone Input (J1), BNC Main RF Output (J2), BNC Range Calib RF Output (J3), DB9 (J4)
    Power Requirements:
    105–125 VAC, 60 Hz; Fuse 2A
    Front Panel Controls:
    Operate/Calibrate switch, RF attenuation knobs (FM Mod 1 & 2), indicators
    RF Attenuation Range:
    0–40 dB (per FM Modulator attenuator dial)
    Country/Region of Manufacture:
    United States
    Compatible With:
    Satcom Uo Upconverter, RF Amplifier systems
    Seller Notes:
    Chassis with three installed plugin modules as described. Tested working.
    Condition Notes:
    3dbm 70MDF-DAT-BRZ Satcom FM Modulator Plugin Chassis tested and confirmed working with a compatible Uo Converter and RF Amplifier. All three plugins installed. Normal wear. Unit shipped may vary from photo.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $425.00
    Was: $850.00
  • Hughes 3814115-100 Galaxy Range Tone Processor front panel view showing Mode, Input, OSC, Measure controls and Tones buttons Hughes Range Tone Processor front panel close-up showing Computer/Manual mode switch, Normal/Test input switch, and tone frequency buttons 277.7, 507.2, 434, 54.25

    Hughes 3814115-100 Galaxy Range Tone Processor 28.44 MHz Rackmount Satcom

    Hughes

    $325.00
    Was: $650.00
    Hughes 3814115-100 Galaxy Range Tone Processor 28.44 MHz Rackmount SatcomThe Hughes 3814115-100 is a Range Tone Processor designed for the Galaxy satellite ground system, built by Hughes Aircraft...
    39327
    SKU:
    39327
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    32.00 LBS
    Brand:
    Hughes Aircraft
    Model:
    3814115-100
    MPN:
    3814115-100
    Type:
    Range Tone Processor
    SKU:
    39327
    System:
    Galaxy
    Revision:
    Rev A
    Frequency:
    28.44 MHz
    Form Factor:
    Rackmount
    Manufacturer Division:
    Hughes Satellite Ground Equipment Division
    Oscillator Mode:
    Internal / External switchable
    Input Mode:
    Normal / Test switchable
    Operating Mode:
    Computer / Manual switchable
    Tone Frequencies:
    277.7, 507.2, 434, 54.25 Hz (front panel buttons)
    Measure Control:
    Start / Stop
    Phase Count Display:
    Front panel phase count readout
    Computer Interface:
    D-sub connector (J2, 25-pin)
    Rear Connectors:
    J2 Computer, J3 Receiver, J4 Analog Ø Out, J5 T&C
    Rear Connectors 2:
    J6 Transponder, J7 Status, J8 Computer In, J9 Computer Out
    Rear Connectors 3:
    J10 Analog Ø Out (TP), J11 Range Tone Out (TP), J12 RCVR Input
    Rear Connectors 4:
    J13 OSC Freq, E1 Chassis GND, E2 Signal GND, S1 AC Power On/Off
    Internal Power Module:
    Acopian PB15-50 AC to DC Power Module
    AC Power:
    IEC AC inlet with power switch (rear panel)
    Application:
    Satellite range tone generation and phase measurement
    Condition:
    Used – Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; pulled from working satcom environment. No accessories included.
    Condition Notes:
    Hughes 3814115-100 Galaxy Range Tone Processor in good used condition. Pulled from a working satcom environment. Inspected; front panel controls and rear BNC connectors appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $325.00
    Was: $650.00
  • Microdyne 1151-D(B)(B) Wide Angle PM Demodulator – three-quarter front-right view showing aluminum enclosure and front panel controls Microdyne 1151-D(B)(B) PM Demodulator – rear/side view showing D-Sub 25-pin P3 connector and PI and TI connector cutouts

    Microdyne 1151-D(B)(B) Anti-Sideband Wide Angle PM Demodulator Satcom RF

    Microdyne

    $200.00
    Was: $400.00
    Microdyne 1151-D(B)(B) Anti-Sideband Wide Angle PM Demodulator Satcom RFPhase modulation demodulator module designed for satellite communications earth station systems. Recovers phase-modulated...
    39322
    SKU:
    39322
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    5.00 LBS
    Brand:
    Microdyne
    Model:
    1151-D(B)(B)
    MPN:
    1N51D(B)(B)D
    Type:
    Wide Angle Anti-Sideband PM Demodulator
    SKU:
    39322
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no accessories observed. Photos show unit as-received.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Modular / Plug-In Module
    Modulation Type:
    Phase Modulation (PM)
    Demodulator Mode:
    Anti-Sideband Wide Angle / Wide Band
    Loop Bandwidth Range:
    10, 30, 100, 300, 1000 Hz (switchable)
    Loop Modes:
    Open Loop / Closed Loop
    Search Mode:
    Auto / Manual Search
    AGC Modes:
    NORM / TRACK
    Output Type:
    PM Output
    Rear Connector:
    D-Sub 25-pin (P3); PI and TI connectors
    Front Controls:
    Loop Bandwidth switch, Fine Tune dial, Loop Lock, Noise, BAL, Lock indicators
    Application:
    RF Satcom Earth Station Systems
    Manufacturer Location:
    Microdyne Corporation, Rockville, MD 20850
    Condition Notes:
    Microdyne 1151-D(B)(B) Wide Angle PM Demodulator. Inspected, in good used condition. Pulled from a working satcom environment. Surface scratches on enclosure; front-panel controls and rear D-Sub connector intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Varian Relay Board ASSY 01005925 Rev C – front view showing seven Magnecraft 172DIP-300 DIP relays, DB25 connector, and edge connector Varian Relay Board 01005925 – PCB rear/solder side showing FAB-01005924 Rev D Made in USA markings and edge connector

    Varian Relay Board ASSY 01005925 Rev C PCB Magnecraft 172DIP-300 Relays

    Varian

    $65.00
    Was: $125.00
    Varian Relay Board ASSY 01005925 Rev C PCB Magnecraft 172DIP-300 RelaysPCB relay board assembly used in Varian industrial and telecom equipment. Contains seven Magnecraft 172DIP-300 relays for signal...
    38701
    SKU:
    38701
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Varian
    Model:
    01005925
    MPN:
    01005925
    Secondary Model:
    FAB-01005924
    Type:
    Relay PCB Board
    SKU:
    38701
    Revision:
    Rev C
    FAB Revision:
    Rev D
    Assembly Number:
    ASSY.01005925
    FAB Number:
    FAB-01005924
    Relay Type:
    Magnecraft 172DIP-300
    Number of Relays:
    7
    Connector Type:
    DB25 (25-pin D-sub), edge connector
    Country/Region of Manufacture:
    United States
    Form Factor:
    PCB / Card Module
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Board only. Inspected and in good condition.
    Condition Notes:
    Varian Relay Board ASSY 01005925 Rev C has been inspected and is in good condition. PCB is clean, all seven Magnecraft 172DIP-300 relays present. DB25 and edge connectors intact. Light handling wear only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Varian Klystron Gen II Earth Station board set in aluminum chassis — solder side of red Display/Control Logic Board visible with green Patch Panel Board at right Varian Klystron Gen II board assembly — component side of red Control/Display Logic Board showing multiple orange capacitors, blue trimmer pots, and DIP ICs

    Varian Klystron Gen II Earth Station Display Control Patch Board Set 01000048

    Varian

    $225.00
    Was: $450.00
    Varian Klystron Gen II Earth Station Display Control Patch Board Set 01000048 01002543 01000548This is a three-board control and display logic set for Varian Klystron Gen II satellite earth station...
    38624
    SKU:
    38624
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    15.00 LBS
    Brand:
    Varian
    Model:
    01002543
    MPN:
    01002543 / 01000048 / 01000548
    Type:
    Earth Station Control & Display Logic Board Set
    SKU:
    38624
    Display Logic Board Part Number:
    01000048 Rev W
    Control Logic Board Part Number:
    01002543
    Patch Panel Board Part Number:
    01000548 Rev D
    Application:
    Satellite Earth Station / Klystron Amplifier Control
    Compatible With:
    Varian Klystron Gen II Earth Station
    Form Factor:
    Card / Module (PCB Assembly)
    Number of Boards Included:
    3
    Board 1:
    Display Logic Board, Assy 01000048 Rev W
    Board 2:
    Control Logic Board, Assy 01002543
    Board 3:
    Patch Panel Board, Assy 01000548 Rev D
    Seller Notes:
    Set of 3 boards: Display Logic, Control Logic, and Patch Panel from Varian Klystron Gen II
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Varian Klystron Gen II Earth Station board set (01000048, 01002543, 01000548) inspected and in good condition. Normal handling wear. PCBs, components, and connectors appear intact. No obvious damage.
    Secondary Model:
    01000048 / 01000548
    Includes:
    Display Logic Board, Control Logic Board, Patch Panel Board
    Display Logic Board Part No.:
    01000048 Rev M
    Control Logic Board Part No.:
    01002543
    Patch Panel Board Part No.:
    01000548 Rev D
    PCB Color:
    Red (Display/Control); Green (Patch Panel)
    Connector Types:
    Edge connector, D-sub, ribbon/card-edge connectors
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $225.00
    Was: $450.00
  • Avantek PS-110-004 satellite power supply front panel view showing Avantek logo, J1 DC output connector, power cord, and label with model and part number Avantek PS-110-004 satellite power supply top and rear view showing gray metal enclosure with mounting flange and attached cable

    Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VAC

    Avantek

    $300.00
    Was: $600.00
    Avantek PS-110-004 Satellite Power Supply 310-037769-001 Rev B 120VACThis is a DC power supply designed for Avantek satellite ground station equipment. It converts 120V AC input to regulated DC...
    36036
    SKU:
    36036
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Avantek
    Model:
    PS-110-004
    MPN:
    310-037769-001
    Secondary Model:
    310-037769-001 Rev B
    SKU:
    36036
    Type:
    Satellite Power Supply
    Input Voltage:
    120V AC
    Fuse Rating:
    2A
    Output Type:
    DC
    Revision:
    Rev B
    AC Input Connector:
    Circular military-style (3-pin)
    DC Output Connector:
    J1 — circular multi-pin
    Included Accessories:
    Power cord with circular 3-pin connector
    Condition:
    Used – Inspected
    Form Factor:
    Benchtop / Panel-Mount
    Compatible With:
    Avantek satellite ground station equipment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes power cord with circular 3-pin connector. Inspected and in good condition.
    Condition Notes:
    Avantek PS-110-004 satellite power supply, P/N 310-037769-001 Rev B. Inspected and in good used condition. Light surface wear; connectors and fuse intact. Includes power cord.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $300.00
    Was: $600.00
  • Varian VJC6767D8T7 VJC6767D5D Switch Control rackmount unit – front panel view showing two push-button switches and a toggle switch with rack ears Varian VJC6767D8T7 VJC6767D5D Switch Control – rear panel showing TB1 terminal block, J1 circular multi-pin connector, J2 and J3 coaxial connectors, J5 header, and dual Varian labels

    Varian VJC6767D8T7 Switch/Switch Control & VJC6767D5D Switch Control Rackmount

    Varian

    $100.00
    Was: $200.00
    Varian VJC6767D8T7 Switch/Switch Control & VJC6767D5D Switch Control RackmountSatcom switch control assembly from Varian's Microwave Equipment Division. This rackmount unit combines a switch control...
    36034
    SKU:
    36034
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    6.00 LBS
    Brand:
    Varian
    Model:
    VJC6767D8T7
    Secondary Model:
    VJC6767D5D
    MPN:
    112022-04
    SKU:
    36034
    Type:
    Satcom Switch / Switch Control
    Form Factor:
    Rackmount
    Manufacturer Division:
    Varian Microwave Equipment Division
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes Switch/Switch Control (VJC6767D8T7) and Switch Control (VJC6767D5D) as a rackmount assembly.
    Application:
    Satellite Communications (Satcom)
    Interface Type:
    Multi-pin circular connector (J1), coaxial (J2, J3), terminal block (TB1)
    Number of Ports / Connections:
    TB1 terminal block (6 positions), J1 circular, J2, J3 coaxial, J5 header
    Condition Notes:
    Varian VJC6767D8T7 / VJC6767D5D satcom switch control rackmount inspected and in good used condition. Pulled from a working environment. Surface scuffing typical of service use. Connectors intact. View photos; contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • Varian VJW2722H1 TWT RF Amplifier Remote Control – front panel view showing RF power output display, emergency off button, and control switches Varian VJW2722H1 Remote Control – rear panel showing two DB25 connectors and two circular mil-spec connectors

    Varian VJW2722H1 Satcom TWT RF Amplifier Remote Control 010002850-01

    Varian

    $150.00
    Was: $300.00
    Varian VJW2722H1 Satcom TWT RF Amplifier Remote Control 010002850-01Remote control unit for Varian TWT RF amplifiers used in satellite communications systems. Provides operator interface for...
    36030
    SKU:
    36030
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    14.00 LBS
    Brand:
    Varian
    Model:
    VJW2722H1
    MPN:
    010002850-01
    Secondary Model:
    VTW2722H1
    Type:
    TWT RF Amplifier Remote Control
    SKU:
    36030
    Manufacturer Division:
    Varian Microwave Equipment Division
    Country/Region of Manufacture:
    United States
    Form Factor:
    Rackmount
    Application:
    Satellite Communications (Satcom) TWT Amplifier Control
    Compatible With:
    Varian TWT RF Amplifiers
    Front Panel Display:
    RF Power Output meter display
    Controls:
    Emergency Off, RF Drive Adj, High Limit, Watts/Peak/DBW select
    Indicators:
    Heater Time Delay, Auto, Manual, status LEDs
    Rear Connectors:
    DB25 (x2), circular mil-spec connectors (x2)
    Seller Notes:
    Unit only; no accessories included.
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    Varian VJW2722H1 TWT RF Amplifier Remote Control (010002850-01). Pulled from a working satcom environment. Inspected and in good used condition. Normal wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • Metraplex MPX 182-493-115 satellite multiplexer mainframe front view showing nine 120-series slide-in modules installed in chassis Metraplex MPX 182-493-115 rear panel showing BNC connectors, signal outputs, and rear-mounted cooling fan

    Metraplex MPX 182-493-115 Satellite Multiplexer Mainframe w/ 120 Series Modules

    Metraplex

    $200.00
    Was: $400.00
    Metraplex MPX 182-493-115 Satellite Multiplexer Mainframe w/ 120 Series ModulesRackmount satellite subcarrier multiplexer mainframe designed for signal routing and processing in satellite...
    36029
    SKU:
    36029
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    35.00 LBS
    Brand:
    Metraplex
    Model:
    182-493-115
    MPN:
    182-493-115
    Type:
    Satellite Subcarrier Multiplexer Mainframe
    SKU:
    36029
    Form Factor:
    Rackmount
    Included Module 1:
    120-01 MFX Slide-In Board (Qty 3)
    Included Module 2:
    120-13-13 14.5 kHz Input Module (Qty 2)
    Included Module 3:
    120-25-113 220 Hz CA LP Switch Module (Qty 2)
    Included Module 4:
    120-12-597 19 kHz Input Module (Qty 1)
    Included Module 5:
    120-25-14 4 kHz CA LP Switch Module (Qty 1)
    Total Modules Installed:
    9
    Cooling:
    Rear-mounted cooling fan
    Connector Type:
    BNC (rear panel audio/signal outputs)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes mainframe chassis with 9 installed 120-series slide-in modules as listed.
    Compatible With:
    Metraplex MPX satellite multiplexer system
    Condition Notes:
    Metraplex MPX 182-493-115 satellite multiplexer mainframe. Inspected and in good used condition. All 9 installed 120-series modules present. Normal wear. No obvious damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00