Satcom
Satcom, short for satellite communication, refers to the transmission of data, voice, and video through satellite systems. Satcom technology utilizes satellites in geostationary or low earth orbit to provide global coverage for communication purposes. It enables long-distance communication without the need for physical infrastructure on the ground. Satcom is used in various industries such as aviation, maritime, military, and broadcasting for reliable and secure communication. The use of Satcom is expanding rapidly with advancements in technology, offering high-speed internet access, telecommunication services, and remote monitoring capabilities. Satcom plays a crucial role in connecting remote areas and ensuring seamless communication worldwide.
-
Hughes 7742917 RZ Tone Digital VME Board Card 7729307-099 Satellite Command
Hughes
$150.00Was: $300.00Hughes 7742917 RZ Tone Digital VME Board Card 7729307-099 Satellite CommandRZ Tone Digital VME board card assembly for satellite command generation. Designed for use in Hughes/SSEL ground support...48328- SKU:
- 48328
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Hughes
- Model:
- 7742917
- MPN:
- 7742917
- Secondary Model:
- 7729307-099
- SKU:
- 48328
- Type:
- RZ Tone Digital VME Board Card Assembly
- Form Factor:
- VME Card/Module
- Compatible With:
- Hughes/SSEL 7746600-100 Command Generator VME
- Application:
- Satellite Command Generation / Satcom Ground Support
- Bus Interface:
- VME (Versa Module Europa)
- Connector Type:
- High-density DIN VME backplane connectors
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Card only; pulled from Hughes/SSEL 7746600-100 Command Generator VME
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Hughes 7742917 RZ Tone Digital VME Board Card (7729307-099) inspected and in good condition. Pulled from a Hughes/SSEL 7746600-100 Command Generator VME. Board and connectors intact with normal light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
HDPE Spin Coating Chamber Minarik C1XP01-115AC-A Norgren NB07A Linear Actuator
HDPE
$500.00Was: $1,000.00HDPE Spin Coating Chamber Minarik C1XP01-115AC-A Norgren NB07A Linear ActuatorThis is an HDPE-lined spin coating chamber assembly integrating a Minarik Drives C1XP01-115AC-A DC motor drive controller...46849- SKU:
- 46849
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 103.00 LBS
- Brand:
- Unbranded
- Model:
- C1XP01-115AC-A
- MPN:
- C1XP01-115AC-A
- Type:
- Spin Coating Chamber with DC Drive Controller
- SKU:
- 46849
- Seller Notes:
- Includes Minarik C1XP01-115AC-A drive, Norgren NB07A actuator, power cord
- Drive Controller Brand:
- Minarik Drives
- Drive Controller Model:
- C1XP01-115AC-A
- Drive Controller Input:
- 115VAC, 50/60Hz
- Drive Controller Output:
- 0-90VDC, 1ADC
- Linear Actuator Brand:
- Norgren
- Linear Actuator Model:
- NB07A-E02-AABMO
- Linear Actuator Stroke:
- 7 inches
- Linear Actuator Bore:
- 1-1/8 inch
- Chamber Material:
- HDPE (High-Density Polyethylene)
- Chamber Interior Dimensions:
- 15.5" W x 15.5" D x 5" H (excl. lid)
- Lid Type:
- Hinged transparent viewing lid with latch
- Lid Latch:
- Protex toggle latch
- Application:
- Spin Coating, Photolithography, Semiconductor Processing
- Power Requirements:
- 115VAC, 50/60Hz
- Condition:
- Used – Inspected and in Good Condition
- Country/Region of Manufacture:
- United States
- Condition Notes:
- HDPE spin coating chamber with Minarik C1XP01-115AC-A drive and Norgren NB07A actuator. Inspected, good used condition. Minor exterior scuffing. Interior lining intact, spin chuck and tubing present. Power cord included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$500.00Was: $1,000.00 -
Varian M.E.D. 01-000531 3-Gang Tapped Inductor Klystron HV Power Supply CMC
Varian M.E.D.
$300.00Was: $600.00Varian M.E.D. 01-000531 3-Gang Tapped Inductor Klystron HV Power Supply CMC 1379AThree-gang tapped inductor assembly pulled from a high-voltage klystron power supply. Functions as a filter/choke in...46113- SKU:
- 46113
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Varian M.E.D.
- Model:
- 01-000531
- MPN:
- 01-000531
- Secondary Model:
- CMC 1379A
- Type:
- 3-Gang Tapped Inductor Assembly
- SKU:
- 46113
- Seller Notes:
- Pulled from a high-voltage klystron power supply. Sold as a single assembly.
- Application:
- High-voltage klystron power supply filter/choke
- Voltage Rating:
- 3.6–9.2 KV DC (source supply output range)
- Number of Cores / Gangs:
- 3
- Winding Configuration:
- Tapped (multiple tap points on terminal strip)
- Terminal Strip:
- Numbered terminal strip, approximately 20 positions per side
- Reference / Drawing Number:
- 738-8448
- Serial Number:
- 252
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian M.E.D. 01-000531 3-gang tapped inductor removed from a high-voltage klystron power supply. Good used condition — cores intact, terminal strip complete. Shows paint loss, surface oxidation, and industrial grime. No core damage visible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
Varian 01-000531-00A High Voltage Power Supply Inductor Set of 3 Klystron HV
Varian
$150.00Was: $300.00Varian 01-000531-00A High Voltage Power Supply Inductor Set of 3 Klystron HVSet of three connected inductors for high voltage klystron power supply circuits. Designed to handle DC voltages in the 3...46109- SKU:
- 46109
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 25.00 LBS
- Brand:
- Varian
- Model:
- 01-000531-00A
- MPN:
- 01-000531-00A
- Secondary Model:
- CMC 1379A
- SKU:
- 46109
- Type:
- High Voltage Power Supply Inductor
- Quantity in Set:
- 3 (connected set)
- Application:
- High Voltage Klystron Power Supply
- Voltage Range:
- 3.6–9.2 KV DC
- Configuration:
- Connected Set of 3
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Set of 3 connected inductors; removed from Varian high voltage klystron power supply
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian 01-000531-00A HV power supply inductors, set of 3, removed from a klystron power supply (3.6–9.2 KV DC). Cores and terminals intact; wiring shows typical removal wear. No additional specs available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom Microwave
Blue
$65.00Was: $125.00RF Coax Isolator 110715-01 27338 SMA N-Type Connectors Satcom MicrowaveRF coaxial isolator designed to provide signal isolation in microwave and satcom systems. Routes RF signals between N-type and...45692- SKU:
- 45692
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- 110715-01
- MPN:
- 110715-01
- Secondary Model:
- 27338
- Part Number 2:
- 101103981
- SKU:
- 45692
- Type:
- RF Coaxial Isolator
- Condition:
- Used – Pulled from Working Environment
- Connector 1 (IN):
- N-Type Female
- Connector 2 (OUT):
- SMA Female
- Application:
- Satcom, Microwave, RF Signal Isolation
- Form Factor:
- Compact Block / Inline Module
- Color:
- Blue
- Seller Notes:
- Unit only — no additional accessories included.
- Condition Notes:
- RF Coaxial Isolator 110715-01 / 27338 inspected and in good used condition. Pulled from a working satcom/microwave environment. Body shows light wear; N-type and SMA connectors intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave Component
Blue
$45.00Was: $90.00RF Coax Isolator 27338 110715-02 SMA Connector Satcom Microwave ComponentRF coaxial isolator designed to provide one-way signal transmission while blocking reverse signals in RF and microwave systems...45685- SKU:
- 45685
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- 27338
- MPN:
- 110715-02
- Secondary Model:
- 110715-02-101104345
- SKU:
- 45685
- Type:
- RF Coaxial Isolator
- Connector Type:
- SMA
- Body Color:
- Blue
- Application:
- Satcom, Microwave, RF Systems
- Form Factor:
- Inline / Block Module
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only — no additional accessories included
- Condition Notes:
- RF Coax Isolator 27338 / 110715-02 pulled from a working satcom environment, inspected and in good used condition. Blue body shows minor surface wear. SMA connectors intact with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector Satcom
Blue
$35.00Was: $70.00WMI WMI16453 2JX-8351-C-1 Coaxial RF Isolator SMA N-Type Connector SatcomCoaxial RF isolator used in satellite communications and microwave RF applications. The unit provides isolation between...45684- SKU:
- 45684
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- WMI
- Model:
- WMI16453
- MPN:
- WMI16453
- Secondary Model:
- 2JX-8351-C-1
- SKU:
- 45684
- Type:
- Coaxial RF Isolator
- Connector Type 1:
- SMA (female, top port)
- Connector Type 2:
- N-Type (female, side port)
- Port Configuration:
- SMA top (port), N-type side (IN/OUT labeled)
- Housing Color:
- Blue anodized aluminum
- Application:
- Satellite Communications (Satcom), Microwave RF
- Form Factor:
- Compact Block / Drop-in
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working satcom environment, inspected, good condition.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- WMI WMI16453 coaxial RF isolator pulled from a working satcom environment, inspected and in good used condition. Blue housing shows minor surface wear and paint chips. SMA and N-type connectors intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Varian VJW1454C Channel Selector Sub-System 01014540-01/A Microwave Satcom
Varian
$150.00Was: $300.00Varian VJW1454C Channel Selector Sub-System 01014540-01/A Microwave SatcomThe Varian VJW1454C is a Channel Selector Sub-System designed for microwave satellite communications ground station equipment...45556- SKU:
- 45556
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW1454C
- MPN:
- 01014540-01/A
- Secondary Model:
- 01014521-00/B
- SKU:
- 45556
- Type:
- Channel Selector Sub-System
- Condition:
- Used – Inspected and Tested
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop / Rackmount
- Front Panel Controls:
- UP, DOWN, SEL, LAMP TEST, CONT MODE pushbuttons
- Front Panel Displays:
- Red 7-segment CHANNEL display; red 7-segment SELECT display
- Front Panel Indicators:
- PWR FAIL, CABLE LEDs; LOC, REM, AUX status LEDs
- Rear Connectors:
- IEC AC power inlet (J1); DB25-style connector; J3, J5, J6 multi-pin
- Rear Features:
- RESET button; multiple D-sub multi-pin I/O connectors (J3, J5, J6)
- Application:
- Microwave satellite communications channel selection
- Compatible With:
- Varian microwave equipment / satcom ground station systems
- Seller Notes:
- Unit only — no additional accessories observed.
- Condition Notes:
- Varian VJW1454C Channel Selector Sub-System 01014540-01/A has been inspected and is in good used condition. Chassis shows light surface scuffing; front panel controls and displays appear intact. Rear connectors undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Varian VJW1455B1 Channel Select Assy 01014521-00 Microwave Equipment Division
Varian
$150.00Was: $300.00Varian VJW1455B1 Channel Select Assy 01014521-00 Microwave Equipment DivisionThe Varian VJW1455B1 is a Channel Select Assembly produced by Varian's Microwave Equipment Division. It provides...45555- SKU:
- 45555
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW1455B1
- MPN:
- 01014521-00
- Secondary Model:
- 0101454204
- Type:
- Channel Select Assembly
- SKU:
- 45555
- Seller Notes:
- Unit only; no cables included. Inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Division:
- Varian Microwave Equipment Division
- Power Requirements:
- 115VAC, 100VA Max
- AC Power Connector:
- IEC C14 inlet (J1)
- Rear Connectors:
- Multiple D-sub connectors: J2, J3, J4, J5, J6
- Front Panel Controls:
- UP, DOWN, SEL, LAMP TEST, CONT MODE pushbuttons
- Front Panel Displays:
- Dual LED numeric displays: CHANNEL and SELECT
- Front Panel Indicators:
- PWR FAIL, CABLE indicators; LOC/REM/AUX mode labels
- Control Modes:
- Local, Remote, Auxiliary
- Reset:
- Rear-panel RESET button
- Form Factor:
- Benchtop / Rackmount
- Condition:
- Used – Inspected and in good condition
- Condition Notes:
- This Varian VJW1455B1 Channel Select Assembly (P/N 01014521-00) has been inspected and is in good condition. Light surface wear on the chassis; front-panel controls, LED displays, and rear D-sub connectors appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control Module
Standard
$55.00Was: $100.00Standard MT830 Agile Omni Ku-Band Broadcast Satellite Receiver No Control ModuleThe Standard MT830 is a rackmount agile satellite receiver designed for broadcast and professional satellite downlink...45518- SKU:
- 45518
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 24.00 LBS
- Brand:
- Standard Communications
- Model:
- MT830
- MPN:
- MT830
- Type:
- Ku-Band Agile Satellite Receiver / IRD
- SKU:
- 45518
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- No control access module included; unit only as shown
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Rackmount, 2U
- Power Requirements:
- 120V AC, 60Hz, 70W
- Frequency Band:
- C-Band and Ku-Band
- RF Input:
- 950 MHz – 1450 MHz (LNB IF input)
- LNB Power Output:
- 20V DC, 300mA Max
- External IF:
- EXT 70MHz input
- Antenna Polarity:
- Normal / Reverse switchable
- Channel Display:
- Green LED numeric channel display
- Front Panel Meter:
- Analog Signal / C/N / Tune meter
- Video Output:
- Composite Video Out, Video Out (RCA)
- Audio Output:
- Multiple audio outputs (screw terminal)
- Relay Outputs:
- C-Band RF Relay (VER/OUT/HOR), Ku-Band RF Relay
- Remote Control:
- Remote Control port (multi-pin DIN) on rear
- I/O Module:
- CRC800CI I/O interface module installed
- Format Settings:
- Satellite Format, RF Input, Video, Audio x3, Timer/Alarm, Config
- Compatible With:
- Standard Agile Omni Broadcast satellite receive systems
- Fuse Rating:
- 0.75A, 250V
- Note:
- TRACE CUT label present on rear panel; no control access module
- Condition Notes:
- Standard MT830 Agile Omni Ku-Band satellite receiver. Inspected, good used condition. Pulled from working environment. No control access module included. TRACE CUT label on rear. Please see photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF
Standard Communication
$60.00Was: $125.00Standard MT650 Agile IRD-2 Videocipher II Plus Satellite Receiver 70MHz IF1U rackmount integrated receiver descrambler (IRD) for C-band satellite systems. Handles RF input from 950–1450 MHz and...45515- SKU:
- 45515
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Standard Communications
- Model:
- MT650
- MPN:
- MT650
- Secondary Model:
- Agile IRD-2
- Type:
- Integrated Receiver Descrambler (IRD)
- SKU:
- 45515
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; power cord visible in photos. Inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Form Factor:
- 1U Rackmount
- Descrambler System:
- Videocipher II Plus (VC II Plus)
- Descrambler Type:
- Commercial Descrambler Capable
- IF Frequency:
- 70 MHz
- RF Input Frequency Range:
- 950–1450 MHz
- Video/OSD Test Output:
- 75 Ohm BNC
- IF Test Output:
- 50 Ohm BNC, 70MHz IF
- Video Output:
- BNC (rear panel)
- Audio Outputs:
- Left, Right, Mono (terminal block)
- Data/Clock Output:
- Terminal block (DATA, CLOCK, CADBGDC)
- Loop Through:
- 950–1450 MHz RF loop-through
- Composite Output:
- Yes — rear panel
- Power Requirements:
- 1A 250V (as labeled on rear panel)
- Front Panel Indicators:
- SYNC, AUTH, BYPASS, SIGNAL LEDs
- Front Panel Controls:
- OSD, AFC, AGC switches; MGC Control; Video Level; Audio L/R/Mono; Fine Tune
- Satellite Freq Selection:
- DIP switch (CH # selector on front)
- Compatible With:
- C-band satellite systems, commercial VSAT headends
- Dimensions:
- 23 x 19 x 2 in (approx., per original listing)
- Condition Notes:
- Standard MT650 Agile IRD-2 Videocipher II Plus satellite receiver. Inspected and in good condition. Light surface wear on front panel; minor paint chipping near channel selector door visible in photos. Power cord included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$60.00Was: $125.00 -
Fraunhofer IIS DT500 Digital Media Satellite Modulator ASI IF/IQ 10MHz Ref USB
Fraunhofer
$594.00Was: $1,200.00Fraunhofer IIS DT500 Digital Media Satellite Modulator ASI IF/IQ 10MHz Ref USBDesktop satellite modulator and encoder designed for DVB broadcast and satcom applications. Accepts ASI input and outputs...45510- SKU:
- 45510
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 24.00 LBS
- Brand:
- Fraunhofer IIS
- Model:
- DT500
- MPN:
- DT500
- Type:
- Digital Media Satellite Modulator / Encoder
- SKU:
- 45510
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only; inspected and in good condition
- Country/Region of Manufacture:
- Germany
- Form Factor:
- Desktop / Benchtop
- Power Requirements:
- Full Range 100-240V AC
- Dimensions:
- 17 x 17 x 6 in (approx)
- Interface Type:
- ASI, IF/IQ, 10 MHz Ref, ClockOut, DataIn, USB
- Connector Types:
- BNC (ASI, IF/IQ, 10 MHz Ref, ClockOut, DataIn), DB9, USB, VGA
- Signal Interface:
- ASI (Asynchronous Serial Interface)
- Reference Input:
- 10 MHz Reference (BNC)
- Additional Interfaces:
- IF/IQ output, ClockOut, DataIn (BNC)
- PC I/O Ports:
- PS/2 keyboard, PS/2 mouse, VGA, USB x4, parallel, serial
- Display:
- Built-in color LCD panel
- Front Panel Controls:
- Power, S1/S2, Function, Config, Status, Setup, numeric keypad, nav keys, Esc, USB
- Application:
- Satellite communications, digital media broadcast, DVB
- Compatible With:
- DVB satellite broadcast systems, satcom test environments
- Internal Components:
- Custom RF/digital PCBs, internal ATX-style power supply
- Drive Bay:
- Front-panel DVD/optical drive bay visible
- Condition Notes:
- Fraunhofer IIS DT500 Digital Media Satellite Equipment. Inspected, good condition. Clean chassis with light normal wear. Not bench-tested at our facility; pulled from a working environment. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$594.00Was: $1,200.00 -
Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor Assembly
Satellite Transmission Systems
$150.00Was: $300.00Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor AssemblyRedundancy switching and monitoring assembly for high-power amplifiers in satellite ground stations. Routes signal between...45325- SKU:
- 45325
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Satellite Transmission Systems
- Model:
- HPA Switching & Monitor Assembly
- MPN:
- C14922
- Secondary Model:
- C14922 Rev B
- Type:
- HPA Redundancy Switching & Monitor Assembly
- SKU:
- 45325
- Revision:
- Rev B
- Form Factor:
- Rackmount
- Number of HPA Channels:
- 2 (HPA 1 / HPA 2)
- Control Mode:
- Auto / Manual
- Indicators:
- HPA 1 Norm, HPA 1 Fail, HPA 2 Norm, HPA 2 Fail; ON LINE / OFF LINE
- Relay Type:
- Electromechanical relay matrix (visible internal relays)
- Application:
- Satellite ground station HPA redundancy switching
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Hauppauge, New York
- Condition:
- Used – Inspected
- Condition Notes:
- Satellite Transmission Systems C14922 Rev B HPA Switching & Monitor Assembly. Inspected and in good used condition. Front panel indicators and pilot lights intact. Internal relay matrix and wiring harness complete.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
3dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator Rackmount 115/230VAC BNC RF Out
3dbm
$250.00Was: $500.003dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator Rackmount 115/230VAC BNC RF OutThe 3dbm Inc. 70FMO-BS-2X-AYD is a rack-mounted 70 MHz FM modulator designed for satellite communications uplink chains. Built...45323- SKU:
- 45323
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 18.00 LBS
- Brand:
- 3dbm
- Model:
- 70FMO-BS-2X-AYD
- MPN:
- 70FMO-BS-2X-AYD
- Type:
- FM Modulator
- SKU:
- 45323
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories included. See photos for condition details.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount
- Power Requirements:
- 115/230VAC, 1-Phase, 47-63Hz
- Fuse Rating:
- 115V: 1A / 230V: 0.5A SB
- Output Frequency:
- 70 MHz
- Modulation Type:
- FM (Frequency Modulation)
- RF Output Connector:
- BNC (J1 – RF Out)
- FM Mod Input Connector:
- BNC (J2 – FM Mod In)
- Operate/Calibrate Connector:
- DB9 (J4 – Operate/Calibrate Select)
- Alarm Output Connector:
- Terminal block J3 – Common, N.O., N.C.
- RF Monitor Output:
- BNC (front panel)
- Voltage Monitor Output:
- Banana jacks – GND and +15V (front panel)
- Front Panel Controls:
- AC Power switch, Operate/Calibrate switch, Fault LED
- Peak Deviation Meter:
- Analog meter, kHz scale (front panel)
- Internal Assembly:
- Two 3dbm sub-modules: Relay Enclosure + 70MHz FM Modulator
- PCB Assembly:
- ASSY.50886 (BD.50113L power board)
- Manufacturer Location:
- Camarillo, CA
- Condition Notes:
- This 3dbm 70FMO-BS-2X-AYD 70 MHz FM Modulator is in good used condition. Pulled from a working environment where it was in use and functional. Front panel and rear connectors show light rack wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
Scientific Atlanta D-9130 Multiplexer Chassis 2x D9709 PSU MSYNC 100-240V
Scientific Atlanta
$150.00Was: $300.00Scientific Atlanta D-9130 Multiplexer Chassis 2x D9709 PSU MSYNC 100-240V5U rackmount multiplexer chassis for satellite television network and satcom applications. Designed to house plug-in modules...44767- SKU:
- 44767
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 40.00 LBS
- Brand:
- Scientific-Atlanta
- Model:
- D-9130
- MPN:
- D-9130
- Secondary Model:
- D9709
- SKU:
- 44767
- Type:
- Multiplexer Chassis
- Form Factor:
- Rackmount, 5U
- Power Requirements:
- 100-120V~ 6.3A 125V / 220-240V~ 6.3A 250V
- Power Rating:
- 480W (per PSU)
- Number of PSUs Included:
- 2x D9709 Power Supply Units
- Plug-In Slots:
- Multiple card/plug-in slots (empty — no plug-ins included)
- Included Modules:
- 2x D9709 PSU; 1x MSYNC Control I/O Unit (Slot 1)
- MSYNC Control I/O:
- Included — installed in Slot 1
- Front Panel Indicators:
- Power On, Major Alarm, Supply 1 Fail, Supply 2 Lower, Select
- Rear Connectors (MSYNC):
- 2x RJ-45 (NET), DB-9 (AUX Serial), terminal block, SWF x2, REF OUT, REF IN (BNC)
- Application:
- Satellite Television Network / Satcom Multiplexing
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes 2x D9709 PSUs and 1x MSYNC Control I/O unit; plug-in slots empty
- Country/Region of Manufacture:
- United States
- Compatible With:
- Scientific Atlanta D-9130 series plug-in modules
- Condition Notes:
- Scientific Atlanta D-9130 Multiplexer Chassis, used, inspected, good condition. Pulled from working environment. Includes 2x D9709 PSUs and 1x MSYNC Control I/O unit. Plug-in slots empty — no additional modules included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Varian Digital Interface PCB Assy 01002375-00 Rev A Circuit Board
Varian
$75.00Was: $150.00Varian Digital Interface PCB Assy 01002375-00 Rev A Circuit BoardDigital interface circuit board assembly designed for Varian analytical and industrial instrumentation systems. This card module...41344- SKU:
- 41344
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Varian
- Model:
- 01002375-00
- MPN:
- 01002375-00
- Secondary Model:
- 01002375
- Type:
- Digital Interface PCB
- Hardware Revision:
- Rev A
- Assembly Number:
- 01002375-00 Rev A
- Form Factor:
- Card/Module
- Connector Type:
- Gold edge connectors (dual row)
- PCB Color:
- Green
- Condition:
- Used – Inspected and Pulled from Working Environment
- SKU:
- 41344
- Seller Notes:
- Board only; no cables or mounting hardware included.
- Condition Notes:
- Varian Digital Interface PCB 01002375-00 Rev A. Inspected and in good used condition. Board shows normal handling wear; PCB surface clean, gold edge connectors intact, traces and solder joints appear undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Varian 01000031 Rev H Control Logic Board HPA Satcom RF Transmitter PCB
Varian
$150.00Was: $300.00Varian 01000031 Rev H Control Logic Board HPA Satcom RF Transmitter PCBControl logic board designed for Varian HPA Satcom RF transmitter systems. This PCB module manages transmitter operation and RF...41342- SKU:
- 41342
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Varian
- Model:
- 01000031
- MPN:
- 01000031
- Secondary Model:
- 01000031 Rev H
- Hardware Revision:
- Rev H
- Type:
- Control Logic Board / PCB
- SKU:
- 41342
- Compatible With:
- Varian HPA Satcom RF Transmitter
- Application:
- HPA Satcom RF Transmitter Control
- Form Factor:
- PCB Card / Module
- Connector Type:
- Gold-edge card connector
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only; pulled from a working HPA Satcom RF Transmitter
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian 01000031 Rev H Control Logic Board for HPA Satcom RF Transmitter. Inspected and in good used condition. Pulled from a working environment where it was in active use and functional. Board and gold-edge connector appear clean and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Varian 01002599 MUX Adapter PCB Card Rev B Teltec 01V 01002598A
Varian
$75.00Was: $150.00Varian 01002599 MUX Adapter PCB Card Rev B Teltec 01V 01002598AThe Varian 01002599 is a MUX (Multiplexer) Adapter PCB card used in Varian Teltec 01V systems. Assembly number 01002598A, the board...41340- SKU:
- 41340
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Varian
- Model:
- 01002599
- MPN:
- 01002599-00
- Secondary Model:
- 01002598A
- Type:
- MUX Adapter PCB Card
- SKU:
- 41340
- Revision:
- Rev B
- Assembly Number:
- ASSY 01002599-00 Rev B
- Compatible With:
- Varian Teltec 01V system
- Connector Type:
- Multi-pin D-sub style edge connector (approx. 36-pin)
- Form Factor:
- PCB Card / Module
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- PCB card only; pulled from a working Varian Teltec system
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian 01002599 MUX Adapter PCB (01002598A Rev B) — inspected, good used condition. Pulled from a working Varian Teltec system. Normal light service wear. Connector contacts clean and intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Hughes 3878540-100 Ku-Band Command Upconverter 14180 MHz Satcom AUSSAT 4U
Hughes
$600.00Was: $1,200.00Hughes 3878540-100 Ku-Band Command Upconverter 14180 MHz Satcom AUSSAT 4UKu-Band command upconverter designed for AUSSAT satellite ground equipment. Converts IF signals at 248/248.5 MHz to 14180 MHz...41247- SKU:
- 41247
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 33.00 LBS
- Brand:
- Hughes Aircraft
- Model:
- 3878540-100
- MPN:
- 3878540-100
- Type:
- Ku-Band Command Upconverter
- SKU:
- 41247
- System Compatibility:
- AUSSAT Expansion Rev. D
- Output Frequency:
- 14180 MHz
- IF Frequency:
- 248 / 248.5 MHz
- Frequency Band:
- Ku-Band
- Power Requirements:
- 240 VAC, 1A, 50/60 Hz
- DC Voltages:
- +28V, -15V, +24V, GND, 0V
- Form Factor:
- 4U Rackmount
- Monitor Ports:
- Input, Output, 14180 MHz, 248 MHz, 248.5 MHz, Sweep
- RF Connectors:
- J2 RF IN, J3 RF OUT, J4 248.5 MHz Output (BNC)
- Control Interface:
- J5 Status & Control – DB9 Serial (9-pin)
- Power Connector:
- J1 IEC 240VAC inlet with 1A fuse
- Chassis Ground:
- E1 Chassis GND binding post
- LED Indicators:
- Sweep Loss / Freq Shift, Phase Unlocked
- Voltage Indicators:
- +28V, -15V, +24V LED status lights
- Front Panel Controls:
- Sweep Deviation knob, Sweep Rate knob, Level Set switch, SPOT/OMNI switch
- Sweep Features:
- Adjustable Sweep Deviation and Sweep Rate
- Serial Number:
- 011
- Revision:
- Rev. D
- Division:
- Hughes Satellite Ground Equipment Division
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Powers On, Pulled from Working Environment
- Seller Notes:
- Unit powers on at our warehouse. Sold as pictured; no accessories included.
- Condition Notes:
- Hughes 3878540-100 Ku-Band Command Upconverter. Inspected, good used condition. Pulled from working satcom environment; powers on at our warehouse. Normal service wear. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
Hughes Aircraft 3878521-100 FM Data Detector AUSSAT Satellite Ground System Rev
Hughes
$300.00Was: $600.00Hughes Aircraft 3878521-100 FM Data Detector AUSSAT Satellite Ground System Rev CFM data detector unit designed for AUSSAT satellite ground station systems. Processes composite telemetry input and...41246- SKU:
- 41246
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 18.00 LBS
- Brand:
- Hughes Aircraft
- Model:
- 3878521-100
- MPN:
- 3878521-100
- Type:
- FM Data Detector
- SKU:
- 41246
- Revision:
- Rev C
- System Compatibility:
- AUSSAT Satellite Ground System
- Division:
- Hughes Satellite Ground Equipment Division
- Form Factor:
- Rack Mount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Missing bottom plate; sold as-is with noted cosmetic deficiency
- Front Panel Indicators:
- PS1, MIP, EX status LEDs
- Front Panel Controls:
- Nutation Offset knob, Gain selector (100 Hz/V, 10 kHz/V), Analog Data switch (Nutation/Earth)
- Connector J1:
- Composite TM In – BNC
- Connector J2:
- Detected TM Data Out – D-Sub (DB-25 style, green)
- Connector J3:
- PSI Out – BNC
- Rear Interface:
- RS-Out connector, IEC AC power inlet, On/Off toggle, GND terminal
- Internal Power Module:
- Acopian AC to DC Power Module
- Crystal Oscillator:
- Vectron Laboratories C023L, 10 kHz
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Hughes Aircraft 3878521-100 FM Data Detector pulled from a working environment, inspected, in good used condition. Bottom plate is missing — noted in title and reflected in price. PCBs and internal components present and visually intact. Light wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00