Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Varian VJW6703AR00 TWTA HPA Remote Control Unit – front panel angled view showing power switch, lamp test button, status/alarm indicators, and directional switch diagram Varian VJW6703AR00 remote control unit – rear/bottom view showing Varian label, two blue D-sub connectors (J1 and J3), and internal PCB assembly

    Varian VJW6703AR00 TWTA HPA Remote Control Unit Satcom Directional Switch

    Varian

    $275.00
    Was: $550.00
    Varian VJW6703AR00 TWTA HPA Remote Control Unit Satcom Directional Switch 01007246Remote control unit for TWTA (Traveling Wave Tube Amplifier) and HPA (High Power Amplifier) systems in satellite...
    49646
    SKU:
    49646
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Varian
    Model:
    VJW6703AR00
    MPN:
    01007246-00
    Secondary Model:
    01007250
    SKU:
    49646
    Type:
    TWTA HPA Remote Control Unit / Directional Switch
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Rackmount
    Connector Type:
    D-Sub 25-pin (J1, J3)
    Application:
    Satellite Communications (Satcom) TWTA/HPA Control
    Control Modes:
    Manual, Auto, Local, Remote
    Status Indicators:
    EXT Alarm, HPA 1 Fault, HPA 2 Fault, Power, Lamp Test
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes rackmount chassis with PCB assembly 01007250; no cables included.
    Condition Notes:
    This Varian VJW6703AR00 TWTA HPA Remote Control Unit has been inspected and is in good used condition. Pulled from a working satcom environment where it was in active use and functional.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • HP 8620C Sweep Oscillator rear panel close-up showing BNC connectors labeled PULSE IN, EXT ALC IN, MLA, FM, FREQ REF, RF OUT, power inlet label LINE V=5-10% 48-440Hz 250VA MAX, and rear switch panel HP 8620C Sweep Oscillator front panel with 86240C RF plug-in installed in 19-inch rackmount chassis — full front view

    HP 8620C Sweep Oscillator 86240C RF Plug-In 3.6-8.6GHz Rackmount Hewlett-Packard

    HP

    $250.00
    Was: $500.00
    HP 8620C Sweep Oscillator 86240C RF Plug-In 3.6-8.6GHz Rackmount Hewlett-Packard The HP 8620C is a solid-state multiband sweep oscillator mainframe designed to accept interchangeable RF plug-ins for...
    49643
    SKU:
    49643
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    12.00 LBS
    Brand:
    HP
    Model:
    8620C
    MPN:
    8620C
    Secondary Model:
    86240C
    Type:
    Sweep Oscillator
    SKU:
    49643
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes 86240C RF plug-in installed in 19" rackmount chassis. Powers on; untested for full functionality.
    Country/Region of Manufacture:
    United States
    Form Factor:
    19" Rack Mount
    Frequency Range:
    3.6 to 8.6 GHz
    RF Plug-In Model:
    86240C
    Sweep Type:
    Continuous / Stepped RF Sweep
    Power Requirements:
    100-120V / 220-240V, 48-440Hz, 250VA Max
    Connector Type:
    BNC, SMA / Type-N RF Output
    Interface:
    Rear panel: GPIB (IEEE-488), BNC sync/trigger
    Application:
    Microwave network analyzer, scalar/vector measurements
    Compatible With:
    HP 8410 Network Analyzer, HP 8757 Scalar Network Analyzer
    Compatible With 2:
    HP 8620 Series sweep oscillator plug-ins
    Condition Notes:
    This HP 8620C Sweep Oscillator with 86240C RF plug-in is being sold as-is for parts or repair. The unit does power on; however, it has not been tested for full RF functionality at our facility, and we cannot confirm whether all functions operate as
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • MSE CPA 6010EF SS Power Amplifier – top and left side view showing heatsink fins and SMA input connector with blue label MSE CPA 6010EF SS Power Amplifier – right rear three-quarter view showing waveguide flange output and heatsink base

    MSE CPA 6010EF SS Power Amplifier 5.925-6.425 GHz 45dB Gain Satcom C-Band

    MSE

    $800.00
    Was: $1,600.00
    MSE CPA 6010EF SS Power Amplifier 5.925-6.425 GHz 45dB Gain Satcom C-BandSolid-state power amplifier for C-Band satellite uplink applications. Operates across the 5.925–6.425 GHz frequency range with...
    49622
    SKU:
    49622
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    MSE (Microwave Systems Equipment)
    Model:
    CPA 6010EF
    MPN:
    CPA 6010EF
    Type:
    Solid-State Power Amplifier (SSPA)
    SKU:
    49622
    Frequency Range:
    5.925-6.425 GHz
    Frequency Band:
    C-Band
    Gain:
    45 dB
    Noise Temperature:
    N/A
    Date Code:
    341
    RF Output Connector:
    SMA (female)
    RF Input Connector:
    SMA (female)
    Control Connector:
    DB-25 (D-Sub 25-pin)
    Output Interface:
    Waveguide flange
    Application:
    Satellite Uplink, Satcom Teleport, C-Band VSAT
    Manufacturer Division:
    EF Data - Microwave Systems Equipment Div.
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Pulled from spare parts stockroom at satcom teleport
    Country/Region of Manufacture:
    United States
    Condition Notes:
    MSE CPA 6010EF SS Power Amplifier inspected and in good used condition. Pulled from a spare parts stockroom at a satcom teleport. Chassis, connectors, heatsink, and waveguide flange all appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $800.00
    Was: $1,600.00
  • EF Data PS310 SSPA Power Supply front panel with three SSPA channel controls and PAS2 TAR label EF Data PS310 SSPA Power Supply rear panel showing three multi-pin SSPA connectors, AC inlets, and power cable

    EF Data PS310 SSPA Power Supply w/ Lambda LZS500-2 Regulated 3-Channel

    EF Data

    $200.00
    Was: $400.00
    EF Data PS310 SSPA Power Supply w/ Lambda LZS500-2 Regulated 3-ChannelThe EF Data PS310 is a rackmount SSPA (Solid State Power Amplifier) power supply chassis designed to power up to three SSPA units...
    49641
    SKU:
    49641
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    31.00 LBS
    Brand:
    EF Data
    Model:
    PS310
    MPN:
    PS310
    Secondary Model:
    LZS500-2
    SKU:
    49641
    Type:
    SSPA Power Supply Chassis
    Number of SSPA Channels:
    3 (SSPA 1, SSPA 2, SSPA 3)
    Internal Power Supply:
    Lambda Electronics LZS500-2 Regulated
    Input Voltage:
    115/230 VAC Auto-Selected, 47-65 Hz
    Input Current:
    10A RMS Max
    Output Voltage Range:
    10.0–15.75 VDC
    Max Output Power:
    500 W (525W peak)
    Output Current Max:
    42A at 40°C
    Front Panel Controls:
    Power Supply ON switch + RF Power Monitor per SSPA
    Rear Connectors:
    3x multi-pin SSPA connectors, AC1/AC2/AC3 inlets, GND
    Summary Fault Output:
    DB9 connector on rear panel
    Power Cable:
    Included — 12 AWG 3/C Type SJ with NEMA plug
    Form Factor:
    Rackmount, 3U
    Label / Configuration:
    PAS2 TAR
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    Mexico (Lambda module)
    Seller Notes:
    Includes internal Lambda LZS500-2 and AC power cable
    Condition Notes:
    EF Data PS310 SSPA Power Supply chassis inspected and in good condition. Shows light surface wear from prior rack use. Internal Lambda LZS500-2 module present, wiring intact. AC power cable included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $200.00
    Was: $400.00
  • Varian VJW6769H1 Remote Control Unit VJW-6769H – front panel with LED display and control switches, 19-inch 3U rack chassis Varian VJW6769H1 Remote Control Unit – rear panel showing two DB-25 connectors and attached AC power cable, top cover removed

    Varian VJW6769H1 Remote Control Unit VJW-6769H HPA Satcom Microwave 01014870-00

    Varian

    $150.00
    Was: $300.00
    Varian VJW6769H1 Remote Control Unit VJW-6769H HPA Satcom Microwave 01014870-0019" rack-mount remote control unit for Varian High Power Amplifier (HPA) systems. Provides operator control and status...
    49639
    SKU:
    49639
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    12.00 LBS
    Brand:
    Varian
    Model:
    VJW6769H1
    MPN:
    01014870-00
    Secondary Model:
    VJW-6769H
    Type:
    HPA Remote Control Unit
    SKU:
    49639
    Form Factor:
    19" Rack Mount, 3U
    Application:
    High Power Amplifier (HPA) Control, Satcom / Microwave
    Front Panel Controls:
    Power, Gain Increase/Decrease, Units, Beam On/Off Reset, High Voltage Control, Lamp Test
    HPA Status Indicators:
    Panel Enbl/Dsbl, Heater Time Dly, Stby, Beam On, Sum Fault, RF PWR Low/High, RFL PWR
    Display:
    3-digit LED numeric display (dBW / Watts / Peak Power / MTR RDNG)
    Rear Connectors:
    Two DB-25 connectors (J1, J3/J4) on rear panel
    Internal Assembly:
    Remote Control Display Assy 59782-01014860
    Internal Transformer:
    250V, 50/60Hz AC input transformer on control board
    Condition:
    Used – Powers On; Not Fully Tested
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit powers on. Not fully tested at our facility. See photos for detail.
    Condition Notes:
    Varian VJW6769H1 HPA Remote Control Unit powers on and front panel LEDs light up, but was not fully tested at our facility. Good cosmetic condition. Sold as-inspected. See photos. Contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • LNR 506010030 C-Band Dual Conversion Downconverter – front panel view showing LED frequency display and keypad in 1U rack chassis LNR 506010030 Downconverter – rear panel view showing N-type RF connector, D-sub connector, and cooling vents

    LNR 506010030 C-Band Low Phase Noise Dual Conversion Downconverter 30-Ch

    LNR

    $100.00
    Was: $200.00
    LNR 506010030 C-Band Low Phase Noise Dual Conversion Downconverter 30-ChC-Band dual conversion downconverter with 30 user-programmable channels and low phase noise performance. Designed for satellite...
    49637
    SKU:
    49637
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    24.00 LBS
    Brand:
    LNR Communications
    Model:
    506010030
    MPN:
    506010030
    Type:
    C-Band Dual Conversion Downconverter
    SKU:
    49637
    Condition:
    Used – Pulled from Working Environment
    Revision:
    Rev H
    Frequency Band:
    C-Band
    Conversion Type:
    Dual Conversion
    Number of Channels:
    30 User Programmable
    Phase Noise:
    Low Phase Noise
    Form Factor:
    1U Rackmount
    Front Panel Display:
    LED Channel and Frequency MHz display
    Front Panel Controls:
    Numeric keypad, CL, RCL, FREQ, CHAN, TEST/DISP buttons
    Alarm Monitors:
    RF LO, IF LO, +24V, GND, SUM
    LO Monitor Points:
    LOC LO, REM LO, IF, RF (front panel BNC)
    AC Power Switch:
    Front panel ON/OFF switch with green LED indicator
    Rear Connectors:
    N-type RF connector, D-sub connector, coax LO port
    Application:
    Earth Station, Satellite Ground Station, C-Band Receive
    Seller Notes:
    Unit only; deinstalled from an Earth Station. No accessories.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    LNR 506010030 C-Band Dual Conversion Downconverter deinstalled in working condition from an Earth Station. Powers on; front panel LED display and AC power indicator active. Chassis shows normal rack-service wear. Sold as used.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • MSE SSPA 6010 C-Band solid state uplink amplifier — front/top three-quarter view showing brass housing, MSE label, and SMA RF output connector MSE SSPA 6010 C-Band uplink amplifier — opposite three-quarter view showing waveguide input flange on left end and SMA connector on right

    MSE SSPA 6010 10W Solid State C-Band Uplink Amplifier 5.925-6.425 GHz 45dB

    MSE

    $275.00
    Was: $550.00
    MSE SSPA 6010 10W Solid State C-Band Uplink Amplifier 5.925-6.425 GHz 45dBSolid state power amplifier designed for C-Band satellite uplink applications. Delivers 10 watts output power across the 5...
    49621
    SKU:
    49621
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    11.00 LBS
    Brand:
    MSE (Microwave Systems Equipment Div. / EF Data)
    Model:
    SSPA 6010
    MPN:
    SSPA 6010
    Type:
    Solid State Power Amplifier (SSPA)
    SKU:
    49621
    Frequency Range:
    5.925–6.425 GHz
    Frequency Band:
    C-Band
    Output Power:
    10 Watts
    Gain:
    45 dB
    Noise Temperature:
    N/A
    Application:
    Satellite Uplink / Ground Station
    Output Connector:
    Waveguide flange + SMA (RF OUT)
    Control Connector:
    D-Sub (DB-25 style) rear panel
    Cooling:
    Integral aluminum fin heatsink
    Form Factor:
    Compact block/module with heatsink
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    MSE SSPA 6010 C-Band uplink amplifier. Inspected, good used condition. Pulled from an active satcom working environment. Housing shows light surface oxidation and normal handling wear. Connectors and waveguide flange intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00
  • EF Data CPA 6025 C-Band Solid State Power Amplifier – three-quarter front-left view showing aluminum chassis, gold-anodized RF module on top, cooling fan, and attached cable harness EF Data CPA 6025 C-Band SSPA – three-quarter front-right view showing full unit with yellow power connector, black power cable, and wall-mount bracket

    EF Data CPA 6025 C-Band Solid State Power Amplifier 5.845-6.425 GHz 48 dB

    MSE

    $475.00
    Was: $950.00
    EF Data CPA 6025 C-Band Solid State Power Amplifier 5.845-6.425 GHz 48 dB AS/2719This is a C-Band solid state power amplifier (SSPA) designed for satellite uplink and transmission applications. It...
    49627
    SKU:
    49627
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    22.00 LBS
    Brand:
    EF Data
    Model:
    CPA 6025
    MPN:
    AS/2719
    Type:
    C-Band Solid State Power Amplifier (SSPA)
    SKU:
    49627
    Frequency Range:
    5.845 - 6.425 GHz
    Gain:
    48 dB
    Noise Temperature:
    N/A
    Date Code:
    374
    RF Band:
    C-Band
    Amplifier Technology:
    Solid State (SSPA)
    RF Output Connector:
    SMA (female)
    Control Interface Connector:
    DB-25 (female)
    Cooling:
    Forced air (fan-cooled)
    Form Factor:
    Chassis / Panel-Mount
    Condition:
    Used – Inspected, appears in good condition
    Seller Notes:
    Includes attached power cable and interconnect harness/cables
    Application:
    Satellite uplink, VSAT, C-Band ground station transmit chain
    Condition Notes:
    EF Data CPA 6025 C-Band SSPA, inspected and in good used condition. Normal wear on chassis. Cooling fan, DB-25, SMA connectors, and power/interconnect cables present. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $475.00
    Was: $950.00
  • Miteq U-8153/38152 C-Band Upconverter – front panel view showing Gain Adjust, Alarms, Remote, and Frequency Select controls with RF Monitor port Miteq U-8153/38152 C-Band Upconverter – rear three-quarter view showing AC power inlet, cooling fan, remote interface connectors, and RF output port

    Miteq U-8153/38152 C-Band Upconverter Dual Conversion 70 MHz IF 6 GHz Satcom

    Miteq

    $575.00
    Was: $1,200.00
    Miteq U-8153/38152 C-Band Upconverter Dual Conversion 70 MHz IF 6 GHz SatcomC-Band satellite upconverter performing dual conversion from 70 MHz intermediate frequency to 5.845–6.425 GHz RF output...
    49618
    SKU:
    49618
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    37.00 LBS
    Brand:
    Miteq
    Model:
    U-8153/38152
    MPN:
    U-8153/38152 47233
    Secondary Model:
    38152
    Type:
    C-Band Satellite Upconverter
    SKU:
    49618
    Conversion Type:
    Dual Conversion
    IF Input Frequency:
    70 MHz
    RF Output Frequency Range:
    5.845 – 6.425 GHz
    Frequency Band:
    C-Band (Transmit)
    IF Input Connector:
    J1 IF Input (BNC/N-type, rear panel)
    RF Output Connector:
    J2 RF Output (rear panel)
    Remote Interface:
    J6 Remote Interface (D-Sub 25-pin), RS-232 remote
    Alarm Outputs:
    Summary Alarm (J3), Redundancy Alarm (J7), Remote Mute (J8)
    Front Panel Alarms:
    Modulator, RF-LO, IF-LO LED indicators
    Front Panel Controls:
    Gain Adjust, Remote (REM), Frequency Select (OMNI/DISH)
    Front Panel Monitors:
    RF Monitor port, 1 kHz Monitor, 1 kHz Adjust, Deviation Adjust
    Rear Panel Test Points:
    +20V, +5V, GND, IF LO A, IF LO B, RF LO, Freq & Power
    LO Tune:
    LO Tune port on rear panel
    Power Requirements:
    120 VAC, 3A
    Form Factor:
    Rackmount
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Hauppauge, NY
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; pulled from working satellite earth station environment
    Condition Notes:
    Miteq U-8153/38152 C-Band Upconverter in good used condition. Pulled from a working satellite earth station where it was in active use and functional. Normal rack-service wear. All connectors and panel controls intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $575.00
    Was: $1,200.00
  • Kikusui TOS9201 high-voltage test lead set — black insulated lead bundle with red and black banana plug probes and spade/clip terminations, shown on top of unit Kikusui TOS9201 right-side control panel showing FUNCTION selector buttons (ACW, DCW, IR, SYSTEM, LOCAL), GPIB/RMT indicator, MEMORY controls, CURSOR keys, rotary ENTER knob, and large red STOP button

    Kikusui TOS9201 AC/DC Withstanding Voltage Insulation Resistance Hipot Tester

    Kikusui

    $1,800.00
    Was: $3,600.00
    Kikusui TOS9201 AC/DC Withstanding Voltage Insulation Resistance Hipot Tester Benchtop hipot tester for measuring withstanding voltage and insulation resistance on electrical components and...
    49607
    SKU:
    49607
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    50.00 LBS
    Brand:
    Kikusui
    Model:
    TOS9201
    MPN:
    TOS9201
    Type:
    AC/DC Withstanding Voltage & Insulation Resistance Tester
    SKU:
    49607
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes high-voltage test lead set. Powers on; DC and IR self-tests pass; VOLT ERROR on AC test.
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Benchtop
    Power Requirements:
    100-120V or 200-240V AC, 47-63Hz (selectable)
    AC Output Voltage Range:
    AC 0.05 kV to 5 kV
    AC Output Current (Max):
    100 mA
    DC Output Voltage Range:
    DC 0.05 kV to 6 kV
    DC Output Current (Max):
    10 mA
    Insulation Resistance Test Voltage:
    DC 25 V to 1000 V
    Insulation Resistance Range:
    0.01 MΩ to 9.99 GΩ
    Interface:
    GPIB, RS-232C
    Fuse Rating (100-120V):
    10A SLOW (250V)
    Fuse Rating (200-240V):
    6.3A (250V)
    VA Rating (Max):
    800 VA
    Measurement Functions:
    ACW, DCW, IR (Insulation Resistance)
    Control Features:
    Rise-time, Fall-time, Offset cancel, Memory, Program, Interlock, DC Discharge
    Certifications:
    CE
    Calibration Label:
    Techmaster HPF-103, dated JUN-07-11, due JUN-07-12
    Condition Notes:
    This Kikusui TOS9201 AC/DC Withstanding Voltage and Insulation Resistance Hipot Tester is being sold as-is for parts or repair. The unit powers on and passes its built-in DC withstanding voltage (DCW) and insulation resistance (IR) self-tests — as
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $1,800.00
    Was: $3,600.00
  • Channel Microwave AU323-5 antenna in custom round white cylindrical enclosure – front-left view showing mesh vent, top antenna stub, and attached cabling Channel Microwave AU323-5 custom round antenna enclosure – rear-right view showing ventilation grille, switch control panel connectors, and top antenna post

    Channel Microwave AU323-5 Omni Directional Antenna Custom Round Enclosure RF

    Channel Microwave

    $350.00
    Was: $700.00
    Channel Microwave AU323-5 Omni Directional Antenna Custom Round Enclosure RFMotor-driven RF antenna assembly housed in a custom round cylindrical enclosure. Provides both omnidirectional and...
    35712
    SKU:
    35712
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    34.00 LBS
    Brand:
    Channel Microwave Corporation
    Model:
    AU323-5
    MPN:
    AU323-5
    SKU:
    35712
    Type:
    RF Antenna Assembly in Custom Enclosure
    Antenna Output Types:
    Omni Antenna Out, Directional Antenna Out
    Enclosure Style:
    Custom Round Cylindrical Enclosure
    Connector Types:
    SMA, Military Circular (MIL-spec), TNC/SMA
    Labeled Ports:
    Omni Antenna Out, Directional Antenna Out, Power In, Switch Control
    Cooling:
    Internal blower / cooling fan
    Hour Meter:
    Veeder-Root Quartz hour meter, reads approx. 4099.4 hours
    Internal Components:
    Motor-driven antenna assembly, RF module, blower, wiring harness
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes attached power/control cabling. Unit has ~4099 logged operating hours.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Channel Microwave AU323-5 antenna in custom round enclosure. Inspected, good used condition; pulled from a working environment. ~4099 logged hours per internal Veeder-Root meter. All connectors and cabling present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $350.00
    Was: $700.00
  • Avantek ATM-18033 RF microwave assembly front-right view showing Avantek amplifier module, SMA connectors, and D-sub connector on brass chassis Avantek ATM-18033 RF microwave assembly left-side and rear view of brass chassis with mounted components and SMA port

    Avantek ATM-18033 12-18 GHz RF Microwave System Narda S213D Teledyne CS33SIC-T

    Avantek

    $550.00
    Was: $1,100.00
    Avantek ATM-18033 12-18 GHz RF Microwave System Narda S213D Teledyne CS33SIC-TWideband RF microwave assembly operating in the Ku-Band frequency range of 12 to 18 GHz. Complete chassis-mounted system...
    49561
    SKU:
    49561
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Avantek
    Model:
    ATM-18033
    Secondary Model:
    AMT-18033
    MPN:
    ATM-18033
    SKU:
    49561
    Type:
    Microwave RF Assembly / Wideband Signal Amplifier System
    Frequency Range:
    12 to 18 GHz
    Frequency Band:
    Ku-Band
    Component 1:
    Avantek ATM-18033 Wideband Small Signal Amplifier 12-18 GHz
    Component 2:
    VMC Vectronics Microwave Corp DAD1114-80 Digital Attenuator
    Component 3:
    Narda S213D SPST Switch
    Component 4:
    Narda 4316-2 2-Way Power Divider
    Component 5:
    Teledyne Microwave CS33SIC-T Module 24-30 VDC (Qty 2)
    Component 6:
    Varian VSR 9050BTA
    Component 7:
    Microwave Associates 8R45F Module
    Component 8:
    ARRA Attenuator
    Power Requirements:
    24-30 VDC (Teledyne CS33SIC-T modules)
    Connector Type:
    SMA (gold-plated), D-Sub
    Form Factor:
    Chassis / Board Assembly
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Complete multi-component RF microwave assembly on chassis; all sub-modules included as listed.
    Condition Notes:
    Avantek ATM-18033 12-18 GHz RF microwave assembly inspected and in good used condition. Pulled from a working environment where it was in use and functional. All listed sub-components present on chassis.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $550.00
    Was: $1,100.00
  • Avantek ATM-18033 RF microwave amplifier assembly — three-quarter front view showing Avantek amplifier module, Narda SPST switch, SMA connectors, and D-Sub interface connector on aluminum chassis Avantek ATM-18033 RF microwave assembly — right side and rear view showing flat aluminum panel with part number label and Teledyne CS33SIC-T module visible at lower left

    Avantek ATM-18033 12-18 GHz Wideband Amplifier RF Microwave Assembly w/ Narda

    Avantek

    $550.00
    Was: $1,100.00
    Avantek ATM-18033 12-18 GHz Wideband Amplifier RF Microwave Assembly w/ Narda S213DThis is a multi-component RF and microwave signal assembly built around an Avantek ATM-18033 wideband small signal...
    49560
    SKU:
    49560
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Avantek
    Model:
    ATM-18033
    MPN:
    ATM-18033
    Type:
    RF Microwave Amplifier Assembly
    SKU:
    49560
    Frequency Range:
    12 to 18 GHz
    Amplifier Type:
    Wideband Small Signal Amplifier
    Frequency Band:
    Ku-Band
    Country/Region of Manufacture:
    United States
    Form Factor:
    Chassis/Module Assembly
    Included Component 1:
    Avantek ATM-18033 Wideband Amplifier 12-18 GHz (Qty 1)
    Included Component 2:
    VMC Vectronics DAD1114-80 Digital Attenuator (Qty 1)
    Included Component 3:
    Narda S213D SPST Switch 2-18 GHz (Qty 1)
    Included Component 4:
    Teledyne Microwave CS33SIC-T Module 24-30 VDC (Qty 2)
    Included Component 5:
    Varian VSR 9050BTA (Qty 1)
    Included Component 6:
    Microwave Associates 8R45F Module (Qty 1)
    Included Component 7:
    ARRA 9412-6 Attenuator (Qty 1)
    Included Component 8:
    ARRA 9412-10 Attenuator (Qty 1)
    Connector Type:
    SMA (coaxial), D-Sub
    Control Voltage:
    24-30 VDC (Teledyne modules)
    Narda Switch Model:
    S213D, 2-18 GHz SPST
    VMC Attenuator Model:
    DAD1114-80 Digital Attenuator
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Complete multi-component RF assembly; all sub-modules listed above are included as shown.
    Condition Notes:
    Avantek ATM-18033 12-18 GHz RF amplifier assembly inspected and in good used condition. Pulled from a working environment where it was actively in use and functional. All listed sub-components present. SMA and D-Sub connectors intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $550.00
    Was: $1,100.00
  • W.L. Gore G2R21R01011.6 RF jumper cable assembly full view showing right-angle SMA connector at left end and straight SMA connector at right end W.L. Gore G2R21R01011.6 cable label detail showing part number, manufacturer name, and serial number on white ferrule

    W.L. Gore G2R21R01011.6 Microwave RF Jumper Cable Assembly 11.6" SMA

    W L Gore

    $35.00
    Was: $70.00
    W.L. Gore G2R21R01011.6 Microwave RF Jumper Cable Assembly 11.6" SMASemi-rigid coaxial jumper cable assembly manufactured by W.L. Gore for microwave and RF applications. Features SMA connectors in...
    49551
    SKU:
    49551
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    W.L. Gore
    Model:
    G2R21R01011.6
    MPN:
    G2R21R01011.6
    Type:
    Microwave/RF Jumper Cable Assembly
    SKU:
    49551
    Connector Type:
    SMA (Right-Angle to Straight)
    Cable Length:
    11.6 inches
    Cable Construction:
    Semi-rigid/flexible coaxial
    Application:
    Microwave, RF, Test & Measurement
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Single RF jumper cable assembly as pictured.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    W.L. Gore G2R21R01011.6 RF jumper cable assembly inspected and in good condition. SMA connectors appear intact, center pins undamaged. Normal handling wear consistent with prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • W.L. Gore G2R21R01013.3 microwave RF jumper cable assembly, full length view showing black cable body with white strain relief boots and right-angle SMA connector W.L. Gore G2R21R01013.3 cable label close-up showing part number G2R21R01013.3, manufacturer W.L. Gore, and serial number SN498681

    W.L. Gore G2R21R01013.3 Microwave RF Jumper Cable Assembly SMA 13.3"

    W L Gore

    $65.00
    Was: $125.00
    W.L. Gore G2R21R01013.3 Microwave RF Jumper Cable Assembly SMA 13.3"The W.L. Gore G2R21R01013.3 is a flexible microwave and RF jumper cable assembly measuring 13.3 inches in length. It features SMA...
    49550
    SKU:
    49550
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    W.L. Gore
    Model:
    G2R21R01013.3
    MPN:
    G2R21R01013.3
    Type:
    Microwave/RF Jumper Cable Assembly
    SKU:
    49550
    Connector Type:
    SMA
    Cable Length:
    13.3 inches
    Cable Configuration:
    Straight to Right-Angle SMA
    Application:
    Microwave/RF Interconnect
    Seller Notes:
    Cable only, no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and Tested
    Condition Notes:
    W.L. Gore G2R21R01013.3 RF jumper cable assembly inspected and in good used condition. Cable body intact, no kinks. SMA connectors show light wear; center pins undamaged. Strain relief boots show minor discoloration.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • W.L. Gore G2R21RO1O14.0 microwave RF jumper cable assembly full length view showing black flexible cable with SMA connectors at each end W.L. Gore G2R21RO1O14.0 label on white cable strain relief showing part number and manufacturer markings

    W.L. Gore G2R21RO1O14.0 Microwave RF Jumper Cable Assembly SMA 14 Inch

    W L Gore

    $45.00
    Was: $90.00
    W.L. Gore G2R21RO1O14.0 Microwave RF Jumper Cable Assembly SMA 14 InchMicrowave and RF jumper cable assembly manufactured by W.L. Gore. This cable connects SMA-type RF equipment in test, measurement,...
    49549
    SKU:
    49549
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    W.L. Gore
    Model:
    G2R21RO1O14.0
    MPN:
    G2R21RO1O14.0
    Type:
    Microwave/RF Jumper Cable Assembly
    SKU:
    49549
    Connector Type:
    SMA
    Cable Length:
    14 inches
    Application:
    Microwave / RF Interconnect
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Cable only, no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    W.L. Gore G2R21RO1O14.0 RF Jumper Cable has been inspected and is in good used condition. Both SMA connectors intact with normal wear. Cable has no visible kinks or damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • FEI Microwave DOM816BRS Tunnel Diode Detector full assembly with ARRA 9412-6 gold SMA connector and 9412-10 SMA connector — side view FEI Microwave DOM816BRS Tunnel Detector label closeup showing model number DOM816BRS and partial serial number

    FEI Microwave DOM816BRS Tunnel Diode Detector ARRA 9412-6 9412-10 SMA Coaxial

    FEI Microwave

    $69.00
    Was: $150.00
    FEI Microwave DOM816BRS Tunnel Diode Detector ARRA 9412-6 9412-10 SMA Coaxial Tunnel diode detector designed for microwave and RF signal detection applications. This unit converts high-frequency...
    49547
    SKU:
    49547
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    FEI Microwave
    Model:
    DOM816BRS
    MPN:
    DOM816BRS
    Type:
    Tunnel Diode Detector
    SKU:
    49547
    Included Items:
    ARRA 9412-6 Coaxial Connector, ARRA 9412-10 Coaxial Connector
    Connector Type:
    SMA
    Condition:
    Used – Pulled from Working Environment
    Application:
    Microwave / RF Signal Detection
    Compatible Accessories:
    ARRA 9412-6, ARRA 9412-10
    Seller Notes:
    Includes ARRA 9412-6 and ARRA 9412-10 coaxial connectors. Qty 1 each.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    FEI Microwave DOM816BRS Tunnel Diode Detector pulled from a working environment. Inspected and in good condition. SMA connectors clean. Includes ARRA 9412-6 and 9412-10 coaxial connectors.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $69.00
    Was: $150.00
  • Teledyne Microwave 24022 CS38SI6-D RF switch full view showing 6 semi-rigid SMA coaxial output leads fanning from brass body Teledyne Microwave 24022 label showing model CS38SI6-D, voltage 24-30VDC, date code 8832, with green 15-pin D-sub control connector visible

    Teledyne Microwave 24022 CS38SI6-D RF Switch 6-Position 6-Pole 24-30VDC SMA

    Teledyne Microwave

    $175.00
    Was: $350.00
    Teledyne Microwave 24022 CS38SI6-D RF Switch 6-Position 6-Pole 24-30VDC SMAElectromechanical RF coaxial switch providing single-pole, six-throw (SP6T) switching configuration. Routes RF signals from...
    49542
    SKU:
    49542
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    Teledyne Microwave
    Model:
    CS38SI6-D
    MPN:
    24022
    Secondary Model:
    24022
    Type:
    Electromechanical RF Coaxial Switch
    SKU:
    49542
    Condition:
    Used – Inspected and in Good Condition
    Number of Positions:
    6
    Number of Poles:
    6
    Switch Configuration:
    SP6T (Single Pole, Six Throw)
    Voltage:
    24-30 VDC
    Control Connector:
    D-Sub (15-pin green connector)
    RF Connector Type:
    SMA (female, semi-rigid coax leads)
    Number of RF Ports:
    6 output + 1 common (IN)
    Date Code:
    8832 (manufactured week 32, 1988)
    Switching Technology:
    Electromechanical
    Seller Notes:
    Unit only. No external cables or accessories included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Module/Standalone with bracket mount
    Condition Notes:
    Teledyne Microwave 24022 CS38SI6-D RF switch inspected and in good condition. SMA coax leads and D-sub connector intact. Brass body shows light oxidation typical of age. No structural damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Vectronics Microwave VMC DAD1114-80 Digital Attenuator – front-left view showing VMC label, SMA connector at top, DB-25 connector at front, and red warning label Vectronics Microwave VMC DAD1114-80 Digital Attenuator – rear-right view showing opposite side of enclosure and SMA connector on top

    Vectronics Microwave VMC DAD1114-80 Digital Attenuator DB-25 SMA RF Microwave

    Vectronics Microwave Corp.

    $95.00
    Was: $200.00
    Vectronics Microwave VMC DAD1114-80 Digital Attenuator DB-25 SMA RF Microwave Digital attenuator for RF and microwave signal applications. Controls signal attenuation levels via DB-25 serial...
    49537
    SKU:
    49537
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Vectronics Microwave Corp.
    Model:
    DAD1114-80
    MPN:
    DAD1114-80
    Type:
    Digital Attenuator
    SKU:
    49537
    Seller Notes:
    Unit sold as shown; SMA RF connector and DB-25 control connector included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Enclosed Housing
    RF Connector Type:
    SMA
    Control Interface:
    DB-25 (D-Sub 25-pin) Serial
    Application:
    RF / Microwave Signal Attenuation
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    Vectronics Microwave DAD1114-80 Digital Attenuator pulled from a working environment where it was in use and functional. Inspected and in good used condition. Surface wear and oxidation on housing. DB-25 and SMA connectors intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • Wright Line 35U rackmount enclosure cabinet on caster wheels — front mesh door closed, full front view Wright Line 35U rack cabinet with front door open showing interior shelves and pull-out drawer, front view

    Wright Line 35U Electronic Equipment Rackmount Enclosure Cabinet 23in on Wheels

    Wright Line

    $275.00
    Was: $550.00
    Wright Line 35U Electronic Equipment Rackmount Enclosure Cabinet 23in on WheelsThis Wright Line 35U electronic equipment rackmount enclosure cabinet is a freestanding rack on caster wheels designed...
    49599
    SKU:
    49599
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    227.00 LBS
    Brand:
    Wright Line
    Model:
    35U Electronic Equipment Cabinet
    Type:
    Rackmount Enclosure Cabinet
    SKU:
    49599
    Condition:
    Used – Inspected
    Form Factor:
    Rack Mount, Freestanding on Casters
    Rack Units:
    35U
    Rack Width:
    23 inch hole-to-hole (non-standard 19 inch)
    Mounting Type:
    Freestanding on Caster Wheels
    Includes:
    Fixed shelves, pull-out shelf/drawer, side mouse shelf, casters
    Missing Parts:
    Rear swinging door
    Door Configuration:
    Front mesh door present; rear door missing
    Color:
    White exterior, black interior
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Includes shelves and pull-out drawer. Rear swinging door is missing.
    Condition Notes:
    Wright Line 35U Rackmount Enclosure Cabinet inspected and in good condition. Rear swinging door is missing. Front door, interior shelves, pull-out drawer, and casters all present. Please review photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $275.00
    Was: $550.00