Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
Power-One HC15-3-A International Series Power Supply 15VDC 3A 100-240V
Power-One
$45.00Was: $90.00Power-One HC15-3-A International Series Power Supply 15VDC 3A 100-240VLinear open-frame power supply delivering 15 VDC at 3.0 amperes. Designed for industrial and telecom equipment requiring a...50380- SKU:
- 50380
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Power-One
- Model:
- HC15-3-A
- MPN:
- HC15-3-A
- Type:
- Linear Open-Frame Power Supply
- SKU:
- 50380
- Series:
- International Series
- Output Voltage:
- 15 VDC
- Output Current:
- 3.0 A
- Output Power:
- 45 W
- AC Input Voltage:
- 100, 120, 220, 230-240 VAC (jumper selectable)
- Input Frequency:
- 47-63 Hz
- Max Input Current (100/120V):
- 1 AMP
- Max Input Current (220/240V):
- 0.5 AMP
- Number of Outputs:
- 1
- Output Connector:
- Wire harness with Molex-style connectors
- Form Factor:
- Open Frame / Panel Mount
- Certifications:
- TUV, UL (LR 38879 Level 3, Custom Rectifier)
- Component Type:
- Custom Rectifier
- Country/Region of Manufacture:
- Dominican Republic
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached wire harness with Molex-style connectors. No other accessories.
- Condition Notes:
- Power-One HC15-3-A International Series power supply in good used condition. Pulled from a working environment where it was in active use. Wire harness and connectors appear intact. Light wear consistent with normal service use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Narda 26500 Integrated Thermocouple Power Monitor 10MHz-12.4GHz 100mW RF
Narda
$130.00Was: $250.00Narda 26500 Integrated Thermocouple Power Monitor 10MHz-12.4GHz 100mW RFThermocouple-based RF power meter designed for measurement of continuous and modulated signals across microwave frequencies...50378- SKU:
- 50378
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Narda
- Model:
- 26500
- MPN:
- 26500
- Type:
- Integrated Thermocouple Power Monitor
- SKU:
- 50378
- Varian No.:
- 01000218-00
- US Patent No.:
- 3,668,521
- Manufacturer:
- Narda Microwave Corporation
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop / Inline
- Frequency Range:
- 10 MHz to 12.4 GHz
- Power Range:
- 1 to 100 mW (20 dB)
- Max Rated Power:
- 100 mW
- Measurement Type:
- RF Power (Thermocouple)
- Connector Type:
- N-Type (female input), multi-pin output connector
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment. No accessories included.
- Condition Notes:
- Narda 26500 Thermocouple Power Monitor in good used condition. Pulled from a working environment. Housing shows minor scuffs; N-type and multi-pin connectors intact with red caps. CAL ADJ trimmer present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$130.00Was: $250.00 -
Varian 01016270-02/11 RF Detector Assembly Satcom R9 RF IN R32 RF OUT SMA
Varian
$75.00Was: $150.00Varian 01016270-02/11 RF Detector Assembly Satcom R9 RF IN R32 RF OUT SMAThe Varian 01016270-02/11 is an RF Detector Assembly manufactured by Varian Microwave Equipment Products and designed for use...50370- SKU:
- 50370
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Varian
- Model:
- 01016270-02/11
- MPN:
- 01016270-02/11
- Secondary Model:
- 59782
- Type:
- RF Detector Assembly
- SKU:
- 50370
- Application:
- Satcom (Satellite Communications)
- Connector Type:
- SMA (RF ports), D-Sub 15-pin (interface)
- RF Input Port:
- R9 RF IN
- RF Output Port:
- R32 RF OUT
- Number of RF Ports:
- 7 total (4 on one face, 3 on opposite face)
- Interface Connector:
- D-Sub 15-pin
- Form Factor:
- Benchtop Module / Enclosed Assembly
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Varian 01016270-02/11 RF Detector Assembly. Inspected, in good used condition. Pulled from a working environment where it was in active use and functional. SMA and D-Sub connectors appear intact. See photos.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Panasonic 32EK241 ZNR Metal Oxide Varistor MOV 240V 395V Surge Suppressor
Panasonic
$15.00Was: $30.00Panasonic 32EK241 ZNR Metal Oxide Varistor MOV 240V 395V Surge SuppressorThe Panasonic 32EK241 is a zinc oxide metal oxide varistor (MOV) designed for transient overvoltage protection and surge...50368- SKU:
- 50368
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Panasonic
- Model:
- 32EK241
- MPN:
- 32EK241
- Type:
- ZNR Metal Oxide Varistor (MOV)
- SKU:
- 50368
- Varistor Voltage:
- 240V
- Maximum Clamping Voltage:
- 395V
- Rated Power:
- 1.2W
- Technology:
- Zinc Oxide (ZnO) Metal Oxide Varistor
- Application:
- Surge Suppression & Transient Overvoltage Protection
- Mounting Style:
- PCB Through-Hole / Panel Mount
- Termination:
- Spade / Lug Terminals
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Component only; no additional accessories included
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Panasonic 32EK241 ZNR varistor, used, inspected and in good condition. Pulled from working environment. Body and disc intact, no visible damage. Terminals clean.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Lambda LXS-D-24 Regulated Power Supply 24V DC 10A 105-132V Input Veeco
Lambda
$125.00Was: $250.00Lambda LXS-D-24 Regulated Power Supply 24V DC 10A 105-132V Input VeecoThe Lambda LXS-D-24 is a single-output regulated DC power supply manufactured by Lambda Electronics Corporation, a Veeco...50363- SKU:
- 50363
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 21.00 LBS
- Brand:
- Lambda
- Model:
- LXS-D-24
- MPN:
- LXS-D-24
- Type:
- Regulated DC Power Supply
- SKU:
- 50363
- Output Voltage:
- 24V DC (±5%)
- Output Current:
- 10A @ 40°C; 8.8A @ 50°C; 7.5A @ 60°C; 6.0A @ 71°C
- Input Voltage:
- 105-132V AC
- Input Frequency:
- 57-63Hz
- Max Output Current:
- 10.0A @ 40°C
- Number of Outputs:
- 1
- Output Connection:
- Screw terminal block
- Form Factor:
- Benchtop / Open Frame
- Manufacturer:
- Lambda Electronics Corp (Veeco Subsidiary)
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no accessories. Pulled from a working environment.
- Condition Notes:
- Lambda LXS-D-24 Regulated 24VDC Power Supply. Inspected, in good used condition. Pulled from a working environment where it was in active use. Shows normal wear. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
CPI Satcom Gen IV HV Module High Power KPA Assembly 01026320 Rev 13
CPI
$750.00Was: $1,500.00CPI Satcom Gen IV HV Module High Power KPA Assembly 01026320 Rev 13High voltage power supply module designed for satellite communications high power klystron power amplifier (KPA) systems. This PCB...50361- SKU:
- 50361
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- CPI (Communications & Power Industries)
- Model:
- 01026320
- MPN:
- 01026320-00
- Secondary Model:
- Gen IV HV Module
- Revision:
- Rev 13
- Type:
- High Voltage Power Supply Module
- Application:
- High Power KPA (Klystron Power Amplifier) Satcom
- Form Factor:
- PCB / Board Module
- Connector Type:
- Military-style circular multi-pin connector (8-pin)
- Key Components:
- Custom wound HV capacitors, toroidal HV transformer, HV rectifier network
- HV Capacitors:
- Custom KMR1A6607SP-2, 0.1uF ±10%, 6000V DC (x2 visible)
- Transformer Part Number:
- CPU026324-00, Rev A
- VMEP Code:
- VMEP T59
- SKU:
- 50361
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Board only with attached HV output connector harness
- Country/Region of Manufacture:
- United States
- Condition Notes:
- CPI Satcom Gen IV HV Module Assy 01026320 Rev 13. Pulled from a working environment where it was in active use. Board inspected and appears in good condition. HV capacitors, transformer, and connector harness intact with no visible damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$750.00Was: $1,500.00 -
Varian F137CA2 WR-137 C-Band Waveguide with Fins Satcom RF Microwave Load
Varian
$110.00Was: $225.00Varian F137CA2 WR-137 C-Band Waveguide with Fins Satcom RF Microwave LoadWR-137 rectangular waveguide component designed for RF signal transmission and termination in C-Band satellite communications...50357- SKU:
- 50357
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Varian
- Model:
- F137CA2
- MPN:
- F137CA2
- Type:
- C-Band WR-137 Waveguide with Fins
- SKU:
- 50357
- Waveguide Size:
- WR-137
- Frequency Band:
- C-Band (3.95–5.85 GHz)
- Application:
- RF / Satcom / Microwave
- Flange Type:
- Rectangular waveguide flange (brass)
- Body Material:
- Black anodized aluminum body with fins
- Fins:
- Yes — longitudinal fins on body
- Condition:
- Used – Inspected, Good Condition
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Varian F137CA2 WR-137 C-Band waveguide with fins. Inspected, good used condition. Black finned body intact, both brass flanges present with minor oxidation typical of age, apertures clean. Model label legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$110.00Was: $225.00 -
Varian F137CA6 WR-137 C-Band Waveguide Load with Fins RF Satcom 5.85-8.2 GHz
Varian
$150.00Was: $300.00Varian F137CA6 WR-137 C-Band Waveguide Load with Fins RF Satcom 5.85-8.2 GHzC-Band waveguide termination load designed for RF power absorption in microwave and satellite communication systems...50356- SKU:
- 50356
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Varian
- Model:
- F137CA6
- MPN:
- F137CA6
- Type:
- C-Band Waveguide Load with Cooling Fins
- SKU:
- 50356
- Waveguide Size:
- WR-137
- Frequency Band:
- C-Band
- Frequency Range:
- 5.85 – 8.2 GHz
- Flange Type:
- UG-344/U (standard WR-137 waveguide flange)
- Cooling Method:
- Passive fins (air-cooled)
- Application:
- RF power termination, satcom, microwave systems
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Unit only — no additional accessories included.
- Condition Notes:
- Varian F137CA6 WR-137 C-Band waveguide load inspected and in good condition. Body, fins, and flanges show normal wear. Flange faces and waveguide apertures intact. No visible damage to mating surfaces.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
ICP DAS VPD-143 Industrial Control Enclosure IP66 24VDC Relays Ethernet PLC
ICP DAS
$446.00Was: $900.00ICP DAS VPD-143 Industrial Control Enclosure IP66 24VDC Relays Ethernet PLCThis is a custom-built industrial control panel housed in an IDE POL605023 IP66-rated polyester enclosure. The enclosure is...50348- SKU:
- 50348
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 44.00 LBS
- Brand:
- ICP DAS
- Model:
- VPD-143
- MPN:
- POL605023
- Type:
- Industrial Control Panel Enclosure
- SKU:
- 50348
- Enclosure Model:
- IDE POL605023 Polyester Enclosure
- Enclosure Rating:
- IP66
- Backing Plate:
- IDE PML6050 Metal Backing Plate
- HMI / Touchscreen:
- ICP DAS VPD-143 4.3" Color Touch LCD
- I/O Module:
- ICP DAS M-7055D 8-Ch DI / 8-Ch DO, 16-bit Counters
- Ethernet Switch:
- ICP DAS Unmanaged 5-Port 10/100 Mbps Industrial
- Circuit Breakers:
- 2x Shihlin BHA 32, 3x Shihlin BHA 33
- Relays:
- 16x ETR2HN 24VDC
- Magnetic Contactors:
- 3x Shihlin S-P11
- Power Supplies:
- 2x Mean Well MDR-60-24, 60W, 24V, 2.5A DIN-Rail
- Power Supply Input Voltage:
- 100-240V AC, 50/60Hz
- Power Supply Output Voltage:
- 24V DC
- Power Supply Output Current:
- 2.5A per unit
- Relay Voltage:
- 24VDC
- Number of Relay Outputs:
- 16
- Digital Inputs:
- 8-Ch Isolated
- Digital Outputs:
- 8-Ch Isolated
- Network Interface:
- 10/100 Mbps Ethernet (5-port unmanaged switch)
- Management Type:
- Unmanaged
- Dimensions:
- 26" x 20" x 11"
- Form Factor:
- Wall-Mount / Floor-Mount Enclosure
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Complete pre-wired enclosure with all components installed as listed
- Country/Region of Manufacture:
- Taiwan
- Condition Notes:
- This ICP DAS VPD-143 Industrial Control Panel Enclosure is in good used condition, pulled from a working environment where it was in active use and functional. All listed components are installed and present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$446.00Was: $900.00 -
Graphtec PR424-4B Chart Paper Roll 386mm 4-Track Chart Recorder Recording Paper
Graphtec
$25.00Was: $50.00Graphtec PR424-4B Chart Paper Roll 386mm 4-Track Chart Recorder Recording PaperChart recorder paper roll for use with Graphtec roll chart recorders. Provides four-track recording capability for...50345- SKU:
- 50345
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 9.00 LBS
- Brand:
- Graphtec
- Model:
- PR424-4B
- MPN:
- PR424-4B
- Type:
- Chart Recorder Paper Roll
- SKU:
- 50345
- Overall Width:
- 386mm
- Hole-to-Hole Width:
- 375mm
- Number of Tracks:
- 4
- Track Width:
- 80mm per track
- Subdivisions:
- 8 x 10mm subdivisions per track
- Tick Marks:
- 1mm ticks, 2mm tall per 10mm box
- Format:
- Roll
- Country/Region of Manufacture:
- Japan
- Condition:
- New
- Compatible With:
- Graphtec roll chart recorders
- Seller Notes:
- New old stock. May be out of original sealed plastic wrap or box.
- Condition Notes:
- Graphtec PR424-4B chart recorder paper roll — new and unused. May be out of original sealed plastic or box, but paper is unused. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Miteq DN8000/5942 C-Band Downconverter 4198.6/71 MHz RF Satcom 115VAC Rackmount
Miteq
$295.00Was: $600.00Miteq DN8000/5942 C-Band Downconverter 4198.6/71 MHz RF Satcom 115VAC RackmountC-Band RF downconverter that converts satellite receive signals from 4198.6 MHz to a 71 MHz intermediate frequency...50322- SKU:
- 50322
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 21.00 LBS
- Brand:
- Miteq
- Model:
- DN8000/5942
- MPN:
- DN8000/5942
- Type:
- C-Band RF Downconverter
- SKU:
- 50322
- Input Frequency:
- 4198.6 MHz (C-Band RF)
- Output Frequency:
- 71.0 MHz (IF)
- Frequency:
- 4198.6 / 71 MHz
- RF Band:
- C-Band
- IF Output:
- 71.0 MHz
- Power Requirements:
- 115 VAC
- Fuse Rating:
- 1.0A
- Form Factor:
- Rackmount
- Front Panel Indicators:
- Out of Lock, Freq/Pwr Monitor, APC T.P., LO Tune
- Test Points:
- GND, +20V, APC T.P., LO Tune
- Rear Connectors:
- J1 RF Input (SMA), J2 IF Output 71.0 MHz (SMA), J3 Summary Alarm (multi-pin circular)
- Local Oscillator:
- Phase-locked; Out-of-Lock and APC indicators on front panel
- Application:
- Satellite ground station C-Band receive chain
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working satcom environment
- Condition Notes:
- Miteq DN8000/5942 C-Band Downconverter inspected and in good used condition. Pulled from a working satcom environment where it was in active use and functional. Front panel and connectors intact. Normal rack wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$295.00Was: $600.00 -
Adaptive Broadband SDM-2020 Satellite Demodulator SW v5.3.1 G7.03 1U Rackmount
Adaptive Broadband
$375.00Was: $750.00Adaptive Broadband SDM-2020 Satellite Demodulator SW v5.3.1 G7.03 1U RackmountThe Adaptive Broadband SDM-2020 is a 1U rackmount satellite demodulator designed for professional ground-segment receive...50310- SKU:
- 50310
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Adaptive Broadband
- Model:
- SDM-2020
- MPN:
- SDM-2020D
- Type:
- Satellite Demodulator
- SKU:
- 50310
- Software Version:
- 5.3.1
- Interface Standard:
- G7.03
- Form Factor:
- 1U Rackmount
- Power Requirements:
- 100-240V AC, 1.0A-0.5A, 50-60Hz
- Input Interface:
- ASI (Asynchronous Serial Interface)
- Output Interface:
- ASI (Asynchronous Serial Interface)
- Data Interface:
- EIA-422/530 (J5 connector)
- Remote Control Interface:
- J1 Remote (DB-9)
- Fault Interface:
- J2 Fault (DB-9)
- Front Panel Display:
- LCD alphanumeric display
- Front Panel Controls:
- ENTER, CLEAR, 4-way navigation buttons
- Front Panel Indicators:
- Power On, Sync, Carrier Detect, Test Mode, Alarms, Faults
- Condition:
- Used – Powers On, SW Version Confirmed, Further Testing Limited
- Seller Notes:
- Unit only — no accessories included
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Adaptive Broadband SDM-2020 satellite demodulator powers on; LCD confirms SW v5.3.1. Not tested beyond power-on. Light cosmetic wear from prior rack use. Sold as-is beyond power-on confirmation. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$375.00Was: $750.00 -
Specialty Microwave 4000A-70 1:1 TX Protection Switch 4000 Satcom Rackmount
Specialty Microwave
$275.00Was: $550.00Specialty Microwave 4000A-70 1:1 TX Protection Switch 4000 Satcom RackmountThis is a 1:1 transmitter protection switch designed for satellite uplink redundancy. It provides automatic or manual...50307- SKU:
- 50307
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Specialty Microwave
- Model:
- 4000A-70
- MPN:
- 4000A-70
- Type:
- 1:1 TX Transmitter Protection Switch
- SKU:
- 50307
- Series:
- Protection Switch 4000
- Switch Configuration:
- 1:1 (one primary, one backup transmitter)
- Application:
- Satellite Uplink / SATCOM TX Redundancy
- Switch Mode:
- Auto / Manual / Test
- Form Factor:
- Rackmount, 1U
- RF Connector Type:
- N-Type (4x: IN 1, IN 2, ON-LINE, OFF-LINE)
- Control Connectors:
- D-Sub J1 (25-pin), D-Sub J2 (9-pin)
- Power Requirements:
- 47-63Hz, 115/230VAC dual AC inputs (AC1, AC2)
- Fusing:
- AC1: 2AT Fuse; AC2: 2AT Fuse
- Front Panel Indicators:
- +24V, PS1 Fail, PS2 Fail, Local, Remote
- Front Panel Controls:
- Lamp Test, Auto, Manual toggle switches
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Powers On, Further Testing Limited
- Seller Notes:
- Unit only; no cables included. Powers on as shown in photos.
- Condition Notes:
- Specialty Microwave 4000A-70 1:1 TX Protection Switch powers on (LEDs illuminate) but cannot be tested for full RF switching functionality. Chassis shows age-related yellowing and light wear. RF and D-Sub connectors intact. No cables included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Newtec DVB RX 2060 DVB+8 Satellite Demodulator NTC/2060/Lx 90-260VAC Rackmount
Newtec
$275.00Was: $550.00Newtec DVB RX 2060 DVB+8 Satellite Demodulator NTC/2060/Lx 90-260VAC RackmountThe Newtec DVB RX 2060 is a professional rackmount DVB+8 satellite demodulator designed for receiving and demodulating...50306- SKU:
- 50306
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 20.00 LBS
- Brand:
- Newtec
- Model:
- DVB RX 2060
- MPN:
- NTC/2060/Lx
- Type:
- DVB+8 Satellite Demodulator
- SKU:
- 50306
- Form Factor:
- Rackmount (2U)
- Power Requirements:
- 90-260VAC, 50/60Hz
- Interface Option:
- Interf. 33271AE
- Output Interface:
- SP/RS422
- IF Input Connector:
- BNC
- Monitor & Control Port:
- DB9 RS-232 (MON & CONTRL)
- Alarm Port:
- DB9
- Signal Standard:
- DVB-S / DVB+8
- Modulation:
- QPSK
- Front Panel Display:
- LCD alphanumeric
- Mode Indicators:
- DEMOD, DECOD, DEFR
- Alarm Indicators:
- ACT, MEM, TEST
- Cooling:
- Dual rear-mounted fans
- Condition:
- Used – Inspected and Tested
- Country/Region of Manufacture:
- Belgium
- Seller Notes:
- Unit powers on, passes boot self-test; all front-panel buttons functional.
- Condition Notes:
- Newtec DVB RX 2060 DVB+8 Satellite Demodulator powers on, display lights up, passes boot-up self-test. All front-panel buttons work. Not tested beyond that at our facility. Chassis shows cosmetic discoloration. Sold as inspected.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Graphtec WR3320 Linearcorder WR3310 4-Channel Flatbed Chart Recorder AZ3302
Graphtec
$594.00Was: $1,200.00Graphtec WR3320 Linearcorder WR3310 4-Channel Flatbed Chart Recorder AZ3302The Graphtec WR3320 Linearcorder is a four-channel flatbed analog chart recorder designed to continuously plot multiple...50302- SKU:
- 50302
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 74.00 LBS
- Brand:
- Graphtec
- Model:
- WR3320
- Secondary Model:
- WR3310
- MPN:
- WR3320
- Type:
- Flatbed Chart Recorder
- SKU:
- 50302
- Number of Channels:
- 4
- Recorder Style:
- Flatbed / Linearcorder
- Included Modules:
- Graphtec AZ3302 (4 modules)
- Chart Speed Range:
- 5 to 500 mm/min (switchable)
- Chart Speed Units:
- mm/min; SEC/MIN/FAST modes
- Input Range:
- mV / V selectable per channel
- Range Settings:
- 10, 20, 50, 100, 200, 500 mV/V per channel
- Power Input:
- DC 100V (visible on rear label)
- Pen Type:
- Heated thermal stylus
- Chart Type:
- Fan-fold / roll paper
- Front Panel Controls:
- Power on/off, Chart speed, Timing, Event, Heat, Chart Ext
- Channel Inputs:
- CH1 IN, CH2 IN, CH3 IN, CH4 IN (banana/BNC rear)
- Monitor Outputs:
- CH1 MON, CH2 MON, CH3 MON, CH4 MON
- External Control:
- EXT CONTROL connector on rear panel
- Rear Connectors:
- Banana jacks (+/-/GND) per channel, IEC AC inlet
- Form Factor:
- Benchtop / Portable
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes 4x Graphtec AZ3302 amplifier modules and chart paper
- Alarm / Event Functions:
- Alarm out, Event marker, Timing marker
- Indicators:
- Green ON-LINE / Red OFF-LINE LED indicator
- Rewind Function:
- Yes — Rewind control on right side panel
- Condition Notes:
- Graphtec WR3320 Linearcorder 4-channel flatbed chart recorder. Inspected, in good used condition. Pulled from a working environment where it was in use and functional. Includes 4x Graphtec AZ3302 modules. Normal lab wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$594.00Was: $1,200.00 -
Newtec NTC/2063/Lx DVB Satellite Demodulator DVB-2063 1.41-45 Mbaud Rackmount
Newtec
$275.00Was: $550.00Newtec NTC/2063/Lx DVB Satellite Demodulator DVB-2063 1.41-45 Mbaud RackmountDVB satellite demodulator for receiving and processing DVB-S signals. Supports QPSK modulation with symbol rates from 1.41...50301- SKU:
- 50301
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- Newtec
- Model:
- NTC/2063/Lx
- MPN:
- NTC/2063/Lx
- Secondary Model:
- DVB 2063
- Type:
- DVB Satellite Demodulator
- SKU:
- 50301
- Interface Option:
- 3362/HG
- Symbol Rate Range:
- 1.41 – 45 Mbaud
- Standards:
- DVB, DVB-S, QPSK
- IF Inputs:
- 3 x BNC (A, B, C) on rear panel
- Output Connectors:
- COAX1, COAX2 (BNC); SUB-D port
- Monitoring & Control:
- MON & CTRL – DB9 serial port, rear panel
- Alarm Interface:
- DB9 ALARM connector, rear panel
- Power Requirements:
- 100-240V AC, 47-63 Hz, 150VA MAX
- Power Connector:
- IEC C14 inlet with rocker on/off switch
- Form Factor:
- Rack Mount
- Rack Units:
- 2U
- Front Panel Display:
- LCD alphanumeric display
- Front Panel Controls:
- Numeric keypad; MODE (DEMOD/DECOD/DEFR); ALARM (ACT/MEM/TEST)
- Firmware Version:
- v1.60 (14 Nov 2000, per display)
- Country/Region of Manufacture:
- Belgium
- Certifications:
- UL (E188866), CE, FCC Part 15 Class A
- Condition:
- Used – Powers On, System Test Passed
- Seller Notes:
- Unit only; no additional accessories shown.
- Condition Notes:
- Newtec NTC/2063/Lx DVB Satellite Demodulator powers on; LCD displays 'system test passed.' Good used condition with typical cosmetic wear. Rear connectors clean. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Wilcom T319 T355 Optical Level Meter Transmitter Set w/ Case AC Adapter
Wilcom
$175.00Was: $350.00Wilcom T319 T355 Optical Level Meter Transmitter Set w/ Case AC AdapterThe Wilcom T319 Optical Level Meter and T355 Optical Transmitter form a matched two-instrument set for fiber optic cable testing...50294- SKU:
- 50294
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 10.00 LBS
- Brand:
- Wilcom
- Model:
- T319
- Secondary Model:
- T355
- MPN:
- T319
- SKU:
- 50294
- Type:
- Optical Level Meter and Transmitter Set
- Condition:
- Used – Powers on via AC adapter; internal batteries dead
- Seller Notes:
- Includes T319 meter, T355 transmitter, carrying case, AC adapter, accessories
- Country/Region of Manufacture:
- United States
- Form Factor:
- Handheld / Portable
- Manufacturer:
- Wilcom Products, Inc.
- Manufacture Location:
- Laconia, NH
- Measurement Type:
- Optical Power Level
- Application:
- Fiber Optic Cable Testing / Loss Measurement
- Power Source:
- Internal rechargeable battery or AC adapter
- Includes:
- T319 meter, T355 transmitter, case, AC adapter, accessories
- Compatible With:
- Fiber optic cable plant testing and maintenance
- Date of Manufacture (T355):
- May 1992
- Date of Manufacture (T319):
- May 1991
- Condition Notes:
- Wilcom T319 meter and T355 transmitter power on via AC adapter. Internal rechargeable batteries are dead and need replacement. Not fully tested due to battery condition. Case, AC adapter, and accessories included. ~248 chars
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$175.00Was: $350.00 -
LNR Communications HCL/4 E-Band WR-229 Hot Cold Load RF Attenuator Portable
LNR
$230.00Was: $500.00LNR Communications HCL/4 E-Band WR-229 Hot Cold Load RF Attenuator Portable The LNR Communications HCL/4 is a portable E-Band hot/cold noise calibration load designed for waveguide measurements in...50269- SKU:
- 50269
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- LNR Communications
- Model:
- HCL/4
- MPN:
- HCL/4
- Type:
- E-Band Hot/Cold Waveguide RF Calibration Load
- SKU:
- 50269
- Waveguide Size:
- WR-229
- Frequency Band:
- E-Band
- Connector Type:
- WR-229 Waveguide Flange
- Form Factor:
- Portable / Handheld (wooden carry case)
- Country/Region of Manufacture:
- United States
- Application:
- Noise Figure Calibration, Radiometer Calibration
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes WR-229 waveguide transition arm and wooden carry case
- Condition Notes:
- LNR Communications HCL/4 WR-229 E-Band hot/cold RF load inspected and in good used condition. Pulled from a working environment. Wooden case, interior cavity, brass load, and waveguide arm all appear intact and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$230.00Was: $500.00 -
Micro-Coax PO.9981.K001 WR-62 Waveguide Delay Line 12.4-18GHz Ku-Band 10ft
Micro Coax
$250.00Was: $500.00Micro-Coax PO.9981.K001 WR-62 Waveguide Delay Line 12.4-18GHz Ku-Band 10ft The Micro-Coax Components PO.9981.K001 is a flexible rectangular waveguide delay line designed for operation across the...50260- SKU:
- 50260
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Micro-Coax Components
- Model:
- PO.9981.K001
- MPN:
- PO.9981.K001
- Type:
- Flexible Waveguide Delay Line
- SKU:
- 50260
- Waveguide Size:
- WR-62
- Frequency Range:
- 12.4 – 18.0 GHz
- Frequency Band:
- Ku-Band
- Length:
- 10 ft (approximately 3.05 m)
- Internal Dimensions:
- 0.622 x 0.311 in (15.80 x 7.90 mm)
- Connector / Flange Type:
- Rectangular waveguide flange (WR-62)
- MFR Code:
- 64639
- Country/Region of Manufacture:
- United States
- Applications:
- Radar, ECM, microwave altimeters, cellular amplifiers, LMR
- Condition:
- Used – Untested / As-Is
- Seller Notes:
- Sold as-is, untested. Please view photos and contact us with questions.
- Condition Notes:
- Used Micro-Coax PO.9981.K001 WR-62 Waveguide Delay Line. Light surface wear, flanges intact, label legible. Untested; sold as-is.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
Electronic Measurements TCR 120T40-1-D-0V 4800W DC Power Supply 0-120VDC 40A 3Ph
Electronic Measurement Inc
$1,100.00Was: $2,200.00Electronic Measurements TCR 120T40-1-D-0V 4800W DC Power Supply 0-120VDC 40A 3PhThe Electronic Measurements Inc. TCR 120T40-1-D-0V is a heavy-duty variable DC power supply rated at 4800 watts,...50246- SKU:
- 50246
- Availability:
- This item requires freight shipping — please contact us for a quote or to arrange local pickup or a facility viewing.
- Weight:
- 250.00 LBS
- Brand:
- Electronic Measurements Inc.
- Model:
- TCR 120T40-1-D-0V
- MPN:
- TCR 120T40-1-D-0V
- Secondary Model:
- TCR 120T40
- Type:
- Variable DC Power Supply
- SKU:
- 50246
- Condition:
- Used – Pulled from Working Environment
- Series:
- TCR
- Also Known As:
- Lambda TCR, TDK-Lambda TCR
- Output Voltage:
- 0 – 120 VDC
- Output Current:
- 0 – 40 A
- Power Rating:
- 4800 W
- Input Voltage:
- 208 / 220 VAC
- Input Current:
- 25 A
- Phase:
- Three Phase (3Ø)
- Frequency:
- 50 / 60 Hz
- Form Factor:
- 5U Rackmount
- Panel Height:
- 8.75 in (5U)
- Overall Dimensions:
- 26 x 19 x 8.75 in
- Options:
- 1-D-OV
- Front Panel Controls:
- Voltage knob, Current knob, 3-pole Power switch
- Front Panel Meters:
- Digital Voltage meter, Digital Current meter
- Indicators:
- Phase Loss LED, O.V. (Overvoltage) LED
- Output Connections:
- NEG / POS terminal strip; banana plug output leads
- Input Connection:
- Rear terminal block
- Programmable:
- No (manual front-panel control)
- Number of Outputs:
- 1
- Seller Notes:
- Includes output leads (insulation damaged — see photos). Freight shipping required.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Electronic Measurements TCR 120T40-1-D-0V 4800W DC power supply. Pulled from a working environment, in good overall condition. Output leads included but damaged — cable insulation split, banana plugs corroded; plan to replace before use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,100.00Was: $2,200.00