Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • IntraAction DFE-404C4 dual channel RF frequency synthesizer — front panel showing Channel 1 and Channel 2 controls with BNC connectors, carrier level knobs, analog input/output, RF I/O, and frequency display reading 04112 IntraAction DFE-404C4 RF frequency synthesizer — rear panel showing dual ETRI cooling fans, IEC AC power inlet, power switch, fuse holder, and multi-pin parallel interface connector

    IntraAction DFE-404C4 Dual Channel RF Frequency Synthesizer 115/230VAC BNC

    IntraAction

    $150.00
    Was: $300.00
    IntraAction DFE-404C4 Dual Channel RF Frequency Synthesizer 115/230VAC BNCThe IntraAction DFE-404C4 is a benchtop dual-channel RF frequency synthesizer manufactured by IntraAction Corp. of Bellwood, Illinois. It provides two independent RF output...
    50443
    SKU:
    50443
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    24.00 LBS
    Brand:
    IntraAction
    Model:
    DFE-404C4
    MPN:
    DFE-404C4
    Type:
    Dual Channel RF Frequency Synthesizer
    SKU:
    50443
    Number of Channels:
    2
    Power Requirements:
    115/230VAC
    Connector Type:
    BNC
    Form Factor:
    Benchtop / Rackmount
    Cooling:
    Dual rear-mounted fans (ETRI)
    Rear Interface:
    Parallel/D-sub multi-pin connector
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Powers on; fans spin. Power button partially broken but push-on/off still operates.
    Condition:
    Used – Inspected and Tested
    Condition Notes:
    IntraAction DFE-404C4 RF Frequency Synthesizer powers on; rear fans spin. Front power button partially broken but push-on/off still works. Unable to test further. See photos.
    $150.00
    Was: $300.00
  • IntraAction DFE-40/102 AOM Modulator Driver – front panel view showing frequency display reading 24009, dual-channel VIDEO INPUT and CARRIER LEVEL controls, and BNC connectors IntraAction DFE-40/102 AOM Modulator Driver – rear panel showing IEC AC power inlet, voltage selector switch set to 115V, ETRI cooling fan, and IntraAction Corp rating plate

    IntraAction DFE-40/102 AOM Modulator Driver RF Power Supply 115/230VAC

    IntraAction

    $250.00
    Was: $500.00
    IntraAction DFE-40/102 AOM Modulator Driver RF Power Supply 115/230VACRF power supply and driver for acousto-optic modulators (AOMs). Generates 40 MHz nominal drive frequency for IntraAction AOM and AOD devices with dual-channel output via BNC connectors...
    50442
    SKU:
    50442
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    26.00 LBS
    Brand:
    IntraAction Corp
    Model:
    DFE-40/102
    MPN:
    DFE-40/102
    Type:
    AOM Modulator Driver / RF Power Supply
    SKU:
    50442
    Condition:
    Used – Powers On, Fan Confirmed Spinning
    Seller Notes:
    Unit powers on and fan spins; from aerospace R&D lab
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop / Rackmount
    Power Requirements:
    115/230VAC
    Voltage:
    115/230VAC
    Application:
    Acousto-Optic Modulator (AOM) / AOD Drive
    Number of Channels:
    2
    Frequency:
    40 MHz (nominal AOM drive frequency)
    Connector Type:
    BNC (RF output/input), IEC AC inlet
    Compatible With:
    IntraAction AOM / AOD acousto-optic devices
    Condition Notes:
    IntraAction DFE-40/102 AOM Modulator Driver. Powers on, fan spins; further functional testing not performed. Good cosmetic condition. Ex-aerospace R&D lab. 115V selected. Please contact us with questions.
    $250.00
    Was: $500.00
  • CPI K4U Kyltron Gen IV Satcom Power Supply 01029240-05 – front panel with CPI Satcom Division logo and circuit breaker CPI K4U 01029240-05 Kyltron Power Supply – rear panel showing multi-pin connectors, RF and blower power outputs, and cooling fan

    CPI K4U 01029240-05 Rev.6 Kyltron 2.45kW Gen IV Satcom Power Supply 480V 3Ph

    CPI

    $900.00
    Was: $1,800.00
    CPI K4U 01029240-05 Rev.6 Kyltron 2.45kW Gen IV Satcom Power Supply 480V 3Ph High-power DC power supply designed for satellite ground station transmit/receive equipment. Converts 480V three-phase AC input to regulated DC output for driving traveling wave...
    50441
    SKU:
    50441
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    116.00 LBS
    Brand:
    CPI (Communications & Power Industries)
    Model:
    K4U
    MPN:
    01029240-05
    Secondary Model:
    01029240-05 Rev.6
    Type:
    Satcom High-Power DC Power Supply
    SKU:
    50441
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is for parts or repair. Unit has failed.
    Country/Region of Manufacture:
    United States
    Series:
    Kyltron Gen IV
    Power Rating:
    2.45 kW
    Input Voltage:
    480V
    Input Phase:
    3-Phase
    AC Input Voltage Range:
    200/220V, 350/380/415V, 480V 60Hz; 200V 50Hz
    Compatible With:
    CPI 01026310-03 S/N 1001
    Revision:
    Rev.6
    Division:
    CPI Satcom Division
    Form Factor:
    Rackmount / Chassis
    Application:
    Satellite Ground Station, TWTA Power Supply
    Condition Notes:
    CPI K4U Kyltron 2.45kW Satcom Power Supply 01029240-05 has failed and is sold AS-IS for parts or repair only. Not functional, no guarantee of operability. For technicians/repair. View photos; contact us with questions.
    $900.00
    Was: $1,800.00
  • CCA 59782-01018656-01 Rev 4 Power Processor Board – second angled front view showing full board assembly with wiring harness and toroidal transformer CCA 59782-01018656-01 Rev 4 Power Processor Board – reverse side view showing populated PCB with ICs, edge connectors, and mounting hardware

    CCA 59782-01018656-01 Rev 4 Power Processor Board Satcom PCB Assembly

    CCA

    $150.00
    Was: $300.00
    CCA 59782-01018656-01 Rev 4 Power Processor Board Satcom PCB Assembly Power processor board assembly for satellite communications systems. This circuit card assembly handles power distribution and processing functions within satcom ground equipment or...
    50439
    SKU:
    50439
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    Unbranded
    Model:
    59782-01018656-01
    MPN:
    59782-01018656-01
    Type:
    Power Processor Board / Circuit Card Assembly (CCA)
    SKU:
    50439
    Revision:
    Rev 4
    Form Factor:
    PCB / Card Module
    Application:
    Satellite Communications (Satcom)
    Condition:
    Used – Pulled from Working Environment, Untested
    Seller Notes:
    Board only. Sold untested, as-is. Contact us with questions.
    Condition Notes:
    This CCA 59782-01018656-01 Rev 4 Power Processor Board has been visually inspected and appears to be in good physical condition. It was removed from a satellite communications system where it had been in active use.
    $150.00
    Was: $300.00
  • 01-003859 Rev AC Switch Neg Assembly PCB board – angled top view showing power transistors, red wiring harness, and large yellow Sprague film capacitor 01-003859 Rev AC Switch Neg Assembly PCB board – opposite angled view showing two yellow Sprague 10uF 400V film capacitors and aluminum heatsink rail

    01-003859 Rev AC Switch Neg Assembly PCB Power Supply Board Module

    $35.00
    Was: $70.00
    01-003859 Rev AC Switch Neg Assembly PCB Power Supply Board ModuleOpen frame PCB power supply board assembly for industrial and telecom equipment. This switch negative assembly manages power distribution and regulation in larger systems requiring stable...
    50436
    SKU:
    50436
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Unbranded
    Model:
    01-003859
    MPN:
    01-003859
    Type:
    Switch Negative Power Supply PCB Assembly
    SKU:
    50436
    Revision:
    Rev AC
    Form Factor:
    Open Frame PCB / Board Assembly
    Condition:
    Used – Inspected, Not Bench-Tested
    Seller Notes:
    Board only as shown; no enclosure included
    Notable Components:
    Sprague 10.0uF 400V DC film capacitors, power transistors
    Capacitor Type:
    Sprague 73EP 10.0uF +10% 400V DC
    Mounting:
    Aluminum chassis/heatsink plate
    Condition Notes:
    01-003859 Rev AC Switch Neg Assembly PCB board. Inspected, appears in good condition. Not bench-tested. No obvious damage; capacitors and transistors intact. Photos available.
    $35.00
    Was: $70.00
  • CTI Communication Techniques P-13162 RF Filter 1042.5 MHz – angled front-left view showing CTI logo label, RF Output port with red caps, and bottom-panel controls including JV SET, GSD +5V, LOCK, XTAL, and ALARM connectors CTI P-13162 RF Filter – front face showing label with FREQ 1042.5 MHz, CTI P/N P-13162, S/N 8523001, Code Ident 53213, and RF OUTPUT SMA port with red protective cap

    CTI Communication Techniques P-13162 RF Filter 1042.5 MHz Satcom XTAL

    Communication Techniques Inc.

    $85.00
    Was: $175.00
    CTI Communication Techniques P-13162 RF Filter 1042.5 MHz Satcom XTALCrystal bandpass RF filter operating at 1042.5 MHz, designed for satellite communications applications. Aluminum shielded housing with SMA output connector and circular waveguide-style...
    50435
    SKU:
    50435
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Communication Techniques Inc. (CTI)
    Model:
    P-13162
    MPN:
    P-13162
    Type:
    RF Crystal Filter
    SKU:
    50435
    Frequency:
    1042.5 MHz
    Filter Type:
    Crystal (XTAL) Bandpass Filter
    RF Output Connector:
    SMA (visible on unit)
    Input Connector:
    Circular waveguide-style coaxial (front)
    Code Ident:
    53213
    Serial Number Reference:
    8523001
    Application:
    Satellite Communications (Satcom)
    Enclosure:
    Aluminum shielded housing with mounting flange
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; pulled from working satcom environment
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Benchtop / Panel Mount Module
    Condition Notes:
    CTI P-13162 RF Filter 1042.5 MHz inspected and in good used condition. Pulled from a working satcom environment where it was in active use. Housing shows light wear; all connectors clean with caps intact. Photos available.
    $85.00
    Was: $175.00
  • HP Hewlett-Packard 37201A HP-IB Extender — front panel three-quarter view showing power switch and indicator LEDs HP 37201A HP-IB Extender — rear panel showing HP-IB connector, twisted-pair cable port, auto-calling RS366/V.25, and data RS232C/V.24 connectors

    HP Hewlett-Packard 37201A HP-IB GPIB Extender RS232C V.24 100-240V Benchtop

    Hewlett Packard

    $65.00
    Was: $125.00
    HP Hewlett-Packard 37201A HP-IB GPIB Extender RS232C V.24 100-240V BenchtopThe 37201A is an HP-IB/GPIB bus extender that enables remote communication between HP-IB instruments and controllers via RS232C (V.24) serial links. It extends the distance range...
    50420
    SKU:
    50420
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Hewlett-Packard
    Model:
    37201A
    MPN:
    37201A
    Type:
    HP-IB / GPIB Bus Extender
    SKU:
    50420
    Interface Type:
    HP-IB (IEEE-488 / GPIB)
    Data Port:
    RS232C / V.24
    Auto-Calling Interface:
    RS366 / V.25
    Twisted-Pair Cable Port:
    Yes — rear-panel DIN connector
    Power Requirements:
    100/120/220/240V AC, +5/-10%, 48-66Hz, 30VA Max
    Fuse (100/120V):
    1/2AT 240V
    Fuse (220/240V):
    1/4AT 240V
    Form Factor:
    Benchtop / Rackmountable
    Front Panel Indicators:
    Test Complete, Dialling, Call Complete, Extender Addressed, Loss of Remote Data, Abandon Call & Retry, Data Set Ready, Clear to Send (RFS), DTR Off
    Country/Region of Manufacture:
    United Kingdom
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; inspected and pulled from a working environment.
    Condition Notes:
    Used HP Hewlett-Packard 37201A HP-IB GPIB Extender. Inspected and in good condition; pulled from a working environment. Rear connectors clean. Normal lab wear. Please contact us with any questions.
    $65.00
    Was: $125.00
  • HP Hewlett Packard J752C 10 dB Directional Coupler – full unit angled view showing long rectangular waveguide body with Waveline 401-NF adapters and circular flanges HP J752C Waveguide Directional Coupler – rear/underside view showing both circular waveguide flanges and the rectangular waveguide body from below

    HP Hewlett Packard J752C 10 dB Directional Coupler Waveline 401-NF Waveguide

    Hewlett Packard

    $175.00
    Was: $350.00
    HP Hewlett Packard J752C 10 dB Directional Coupler Waveline 401-NF WaveguideThe Hewlett Packard J752C is a 10 dB waveguide directional coupler designed for microwave signal sampling, power monitoring, and measurement applications. It features a long...
    50418
    SKU:
    50418
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    11.00 LBS
    Brand:
    Hewlett-Packard
    Model:
    J752C
    MPN:
    J752C
    Secondary Model:
    Waveline 401-NF
    Type:
    Waveguide Directional Coupler
    Coupling Factor:
    10 dB
    Connector Type:
    N-Type (N-Female)
    Waveguide Flanges:
    Circular/Round Waveguide Flanges
    Adapter:
    Waveline 401-NF (x2, HP-branded)
    Country/Region of Manufacture:
    United States
    Construction:
    Rectangular waveguide body, olive/gray painted metal
    SKU:
    50418
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes two HP/Waveline 401-NF N-type waveguide adapters
    Condition Notes:
    HP J752C 10 dB Directional Coupler in good used condition. Pulled from a working environment. Both Waveline 401-NF N-type adapters present. Light surface wear. Inspected and in good condition.
    $175.00
    Was: $350.00