Power One 53514G 53516 53624E 53626 Power Supply Custom Enclosure w/ EMI Filter

Power One 53514G 53516 53624E 53626 Power Supply Custom Enclosure w/ EMI Filter Relay

This is a Power One multi-output DC power supply assembly housed in a custom sheet-metal enclosure. The unit integrates two Power One power supply card sets — a BD.53514G (Assy. 53516) and two BD.53624E (Assy. 53626) cards — along with a Corcom EMI filter, a Relco C2-A29 relay, and two Relay Finder 60.12 relays, all wired into a single self-contained chassis. The front panel features a rocker power switch with a green LED indicator and a red push-button, while the rear provides an IEC C14 AC inlet, three circular output ports, and a multi-conductor cable harness with a 9-pin circular connector labeled with output voltages (+15V, +15V, GND, GND).

Specifications & What's Included

• Primary Power Supply Card: BD.53514G, Assembly 53516
• Secondary Power Supply Cards: BD.53624E, Assembly 53626 (Qty 2)
• EMI Filter: Corcom 3VSK7 / F7236 — 3A, 120/250V
• Relay 1: Relco C2-A29
• Relay 2: Relay Finder 60.12 — 10A, 250V (Qty 2)
• Output voltages (as labeled on harness): +15V, +15V, GND, GND
• AC Input: IEC C14 inlet (rear panel)
• Output connector: 9-pin circular locking connector (rear panel)
• Additional output ports: three circular ports visible on rear panel
• Front panel controls: rocker power switch (green LED), red push-button indicator
• Enclosure: custom sheet-metal chassis with perforated top and side panels for ventilation, side-mounted carry handles
• Includes: integrated output cable harness with circular multi-pin connector

Applications

Power One is a well-established manufacturer of modular and card-based DC power supplies widely used in industrial automation, scientific instrumentation, telecommunications equipment, and custom OEM systems. The BD.53514G and BD.53624E card-based supplies are linear regulated designs typical of equipment built for low-noise, stable DC outputs required by precision electronics and control systems. Assemblies like this — combining multiple supply cards, EMI filtering, and relay logic in a single enclosure — are commonly found in legacy custom-built test fixtures, automated production equipment, and scientific apparatus where a self-contained multi-rail power subsystem is needed. The Corcom EMI filter limits conducted interference on the AC input line, and the relay outputs provide switched control signals to downstream equipment. This type of integrated power assembly is sought by engineers maintaining or replicating original system configurations, as well as those looking for a cost-effective regulated multi-rail DC supply for custom builds.