Electronic Test
Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.
-
ARG 2400-EQ390-BOM ASI Distribution Amplifier Splitter 1x4 Rackmount 1U
ARG
$125.00Was: $250.00ARG 2400-EQ390-BOM ASI Distribution Amplifier Splitter 1x4 Rackmount 1UThe ARG 2400-EQ390-BOM is a 1U rackmount ASI (Asynchronous Serial Interface) distribution amplifier and splitter from ARG's 2400...49777- SKU:
- 49777
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 16.00 LBS
- Brand:
- ARG
- Model:
- 2400-EQ390-BOM
- MPN:
- 2400-EQ390-BOM
- Type:
- ASI Distribution Amplifier / Splitter
- SKU:
- 49777
- Series:
- ARG 2400 Series
- Form Factor:
- 1U Rackmount
- Number of Inputs:
- 1 (ASI copper)
- Number of Outputs:
- 4 (ASI copper, identical)
- Signal Type:
- ASI (Asynchronous Serial Interface) — copper
- Relay Bypass:
- Yes — relay bypass module on input
- Power Fail Protection:
- Output 1 continues under power fail
- Power Supplies:
- Dual PSU (PSU 1 and PSU 2)
- Alarm:
- Alarm output connector and Alarm Reset button on front
- Remote Interface:
- REMOTE connector (rear panel)
- Outputs Connector:
- DB-15 OUTPUTS connector (rear panel)
- BNC Connectors:
- Multiple BNC connectors on rear panel
- AC Inlet:
- Dual IEC C14 AC inlets (rear panel)
- Front Panel Indicators:
- PSU 1 LED, PSU 2 LED, Input 1 LED, Input 2 LED
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working broadcast environment.
- Country/Region of Manufacture:
- United Kingdom
- Condition Notes:
- This ARG 2400-EQ390-BOM ASI Distribution Amplifier/Splitter is in good used condition. Pulled from a working broadcast environment where it was in active use and functional. Shows normal rack service wear. All connectors present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00 -
ARG 1900 1945-EQTW1-BOM T3/DS3 ASI Media Combiner Transmitter Dual 44.736Mb/s
ARG
$183.00Was: $500.00ARG 1900 1945-EQTW1-BOM T3/DS3 ASI Media Combiner Transmitter Dual 44.736Mb/s The ARG 1900 is a 1U rackmount T3/DS3 media combiner and transmitter designed for broadcast and telecom distribution...49775- SKU:
- 49775
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- ARG
- Model:
- 1900
- MPN:
- 1945-EQTW1-BOM
- Secondary Model:
- 1945-EQTW1-BOM
- SKU:
- 49775
- Type:
- T3/DS3 ASI Media Combiner Transmitter
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Unit appears to power on; LCD display is faulty. Sold as-is for parts or repair.
- Form Factor:
- 1U Rackmount
- Telecom Port Output:
- Dual 44.736 Mb/s T3/DS3 B3ZS Framed / Unframed
- Number of Inputs:
- 8 (Inputs 1–8: ASI Copper)
- Input Type:
- ASI (Copper)
- Output Type:
- Dual T3/DS3 B3ZS (Framed and Unframed)
- Data Rate:
- 44.736 Mb/s
- Protocol:
- T3/DS3 B3ZS
- Power Requirements:
- 100–240V AC, 50–60Hz, 2A, 1 Phase
- Power Supply:
- Dual Supply System
- Network Option:
- Web Option Fitted (10 Base-T)
- Interface Type:
- ASI (BNC), 10 Base-T (RJ-45), DB9 Serial
- Connector Types:
- BNC (ASI inputs/outputs), RJ-45, DB9
- Standards Compliance:
- CE
- Country/Region of Manufacture:
- United Kingdom
- Condition Notes:
- This ARG 1900 T3/DS3 ASI Media Combiner Transmitter (factory code 1945-EQTW1-BOM) is being sold as-is for parts or repair. The unit appears to power on, but the LCD display is faulty and does not function correctly.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$183.00Was: $500.00 -
ARG ElectroDesign 1945-EQTX2-BOM 1900 Transmitter T3/DS3 B3ZS ASI
ARG
$275.00Was: $550.00ARG ElectroDesign 1945-EQTX2-BOM 1900 Transmitter T3/DS3 B3ZS ASI1U rackmount T3/DS3 transmitter and network adapter for telecom and broadcast applications. Converts 8 ASI (copper) inputs to dual 44...49773- SKU:
- 49773
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- ARG ElectroDesign
- Model:
- 1900 Transmitter
- MPN:
- 1945-EQTX2-BOM
- Type:
- T3/DS3 Transmitter / Network Adapter / Media Combiner
- SKU:
- 49773
- Form Factor:
- 1U Rackmount
- Telecom Port Output:
- Dual 44.736 Mb/s T3/DS3 B3ZS Framed / Unframed
- Input Type:
- ASI (Copper), Inputs 1–8
- Number of Inputs:
- 8
- Data Rate:
- 44.736 Mb/s (T3/DS3)
- Protocol:
- T3/DS3 B3ZS Framed and Unframed
- Network Option:
- 10BASE-T (rear panel option port visible)
- Power Requirements:
- 100–240V AC, 50–60Hz, 2A, 1 Phase (dual supply)
- Power Supply Configuration:
- Dual supply — Mains A and Mains B, Fuse 2A(T) each
- Rear Connectors:
- BNC (Telecom ports), DB9, RJ45, Dual IEC AC inlets
- Front Panel:
- LCD display, FAIL/ALARM/POWER LEDs, navigation keypad
- Display:
- LCD alphanumeric, shows '1900 Transmitter / ARG ElectroDesign'
- Factory Code:
- 1945-EQTX2-BOM
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Unit only; no accessories. Powers on and appears to function normally.
- Country/Region of Manufacture:
- United Kingdom
- Condition Notes:
- ARG ElectroDesign 1945-EQTX2-BOM 1900 Transmitter powers on and appears to function normally. Top cover shows surface soiling and scuffs from prior use. Rear connectors and front panel intact. Used condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
ARG 1900 Receiver 1945-EQRX3-BOM T3/DS3 B3ZS Dual 44.736Mb/s ASI Rackmount
ARG
$275.00Was: $550.00ARG 1900 Receiver 1945-EQRX3-BOM T3/DS3 B3ZS Dual 44.736Mb/s ASI RackmountT3/DS3 to ASI media receiver and combiner. Accepts dual T3/DS3 B3ZS telecom inputs and outputs to eight ASI (copper) ports...49774- SKU:
- 49774
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 15.00 LBS
- Brand:
- ARG
- Model:
- 1900 Receiver
- MPN:
- 1945-EQRX3-BOM
- Type:
- T3/DS3 to ASI Media Receiver / Media Combiner
- SKU:
- 49774
- Factory Code:
- 1945-EQRX3-BOM
- Telecom Port Input:
- Dual 44.736 Mb/s T3/DS3 B3ZS Framed/Unframed
- Data Outputs:
- Outputs 1–8: ASI (Copper)
- Number of Output Ports:
- 8
- Output Connector Type:
- BNC (ASI Copper)
- Telecom Port Connector:
- BNC
- Data Rate:
- 44.736 Mb/s (T3/DS3)
- Signal Standard:
- T3/DS3 B3ZS Framed and Unframed
- Network / Management Port:
- 10BASE-T (rear panel)
- Additional Interfaces:
- Alarm Outputs, Description/Diagnostics port (DB9)
- Power Requirements:
- 100–240V AC, 50–60Hz, 1 Phase, 2A (dual supply)
- Form Factor:
- 1U Rackmount
- Front Panel Display:
- LCD alphanumeric status display
- Front Panel Controls:
- Navigation keys: Left, Right, Up, Down, Home, Enter
- Front Panel Indicators:
- Fail, Alarm, Power LEDs
- Condition:
- Used – Powers On, Appears Functional
- Seller Notes:
- Unit powers on and appears to function normally.
- Country/Region of Manufacture:
- United Kingdom
- Condition Notes:
- ARG 1900 Receiver 1945-EQRX3-BOM powers on and appears to function normally. LCD active; Fail/Alarm LEDs lit as expected with no TX source connected. Light rack wear cosmetically. Ports intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Varian VZC-6967D8T6 VZC-6967D8A2 Dual TWT Amplifier Subsystem Operating &
Varian
$250.00Was: $500.00Varian VZC-6967D8T6 VZC-6967D8A2 Dual TWT Amplifier Subsystem Operating & Service ManualThis is the complete two-volume Operating & Service Manual for the Varian Dual TWT (Traveling Wave Tube)...49766- SKU:
- 49766
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 14.00 LBS
- Brand:
- Varian
- Model:
- VZC-6967D8T6
- Secondary Model:
- VZC-6967D8A2
- MPN:
- VZC-6967D8T6 / VZC-6967D8A2
- SKU:
- 49766
- Type:
- Operating & Service Manual
- Document Type:
- Operating & Service Manual
- For Make/Model:
- Varian VZC-6967D8T6 & VZC-6967D8A2 Dual TWT Amplifier
- Number of Volumes:
- 2
- Series / Configuration:
- G-II & G-III
- Publication / Print Date:
- 07/09/86
- Language:
- English
- Format:
- Print / Binder
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Complete two-volume set covering VZC-6967D8T6 and VZC-6967D8A2
- Country/Region of Manufacture:
- United States
- Application / Use Case:
- Satellite communications TWT amplifier systems
- Condition Notes:
- Varian VZC-6967D8T6/D8A2 Dual TWT Amplifier Subsystem Operating & Service Manual. Complete two-volume set in good used condition. Pages are clean and legible; binder covers show normal shelf wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
BTS PS1200 Power Controller 0-300 VAC 13A Actinic Systems For Parts
BTS
$70.00Was: $150.00BTS PS1200 Power Controller 0-300 VAC 13A Actinic Systems For Parts The BTS PS1200 is a benchtop variable AC power controller manufactured by BTS Inc. under license from Actinic Systems, Inc. It is...49752- SKU:
- 49752
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 71.00 LBS
- Brand:
- BTS Inc.
- Model:
- PS1200
- MPN:
- PS1200
- Type:
- Variable AC Power Controller
- SKU:
- 49752
- Condition:
- As-Is / For Parts or Not Working
- Output Voltage Range:
- 0–300 VAC
- Current Rating:
- 13 Amps Max.
- Input Voltage:
- 100–120 Volts AC
- Frequency:
- 50/60 Hz
- Phase:
- Single Phase
- Front Panel Meters:
- AC Amperes (0–15A), AC Volts (0–300V)
- Hour Meter:
- Cramer mechanical hours counter
- Rear Connectors:
- J1 IEC inlet, J2 terminal block, J3 duplex outlet, J4 multi-pin connector
- Cooling:
- Rear-mounted axial fan
- Licensed From:
- Actinic Systems, Inc.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Benchtop
- Seller Notes:
- Sold as-is for parts or repair. Unit powers on but outputs over-range voltage (~320–340 VAC).
- Condition Notes:
- This BTS PS1200 Variable AC Power Controller is being sold as-is for parts or repair. The unit does power on; however, the POWER indicator light flickers and we were unable to fully test it.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$70.00Was: $150.00 -
I.F. Engineering MC-1200-2X32-F/B-UG 32-Port L-Band Distribution Box
I.F Engineering
$250.00Was: $500.00I.F. Engineering MC-1200-2X32-F/B-UG 32-Port L-Band Distribution BoxRack-mount L-band satellite distribution amplifier with 32 BNC output ports. Distributes satellite L-band signals across multiple...49728- SKU:
- 49728
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 20.00 LBS
- Brand:
- I.F. Engineering
- Model:
- MC-1200-2X32-F/B-UG
- MPN:
- MC-1200-2X32-F/B-UG
- Secondary Model:
- MC-1200-2X32-F/B
- Type:
- L-Band Satellite Distribution Box
- SKU:
- 49728
- Number of Ports:
- 32
- Connector Type:
- BNC
- Form Factor:
- Rack Mount
- Power Requirements:
- 105–132 VAC, 47–420 Hz
- Option:
- Option 3
- Included Component 1:
- 2x AAK Corporation CM242 Regulated DC Power Supply
- Included Component 2:
- 2x I.F. Engineering AM-701-014-B RF Amplifier Module
- Included Component 3:
- 2x I.F. Engineering PD-16-LBAND-B L-Band Splitter
- Power Supply Model:
- AAK Corporation CM242
- Power Supply Output:
- 24VDC, 2A
- Power Supply Input Voltage:
- 105–132 VAC, 47–420 Hz
- Power Supply Output Accuracy:
- 1% Fixed
- Power Supply Input Isolation:
- 50 Megohms
- RF Amplifier Model:
- I.F. Engineering AM-701-014-B
- Amplifier Interface:
- BNC (RF IN / RF OUT)
- Application:
- Satellite L-Band Signal Distribution
- Caution Note:
- DC Blocks required on output of this unit
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes 2x AAK CM242 PSUs, 2x AM-701-014-B amplifiers, 2x PD-16-LBAND-B splitters
- Condition Notes:
- I.F. Engineering MC-1200-2X32-F/B-UG 32-Port L-Band Distribution Box. Inspected, in good used condition. Pulled from a working satcom environment. All sub-components present. DC blocks required on outputs.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$250.00Was: $500.00 -
I.F. Engineering MC-1200-2X32-F/B-UG 2-Channel 32-Port L-Band Distribution Box
I.F Engineering
$600.00Was: $1,200.00I.F. Engineering MC-1200-2X32-F/B-UG 2-Channel 32-Port L-Band Distribution Box 2UThe I.F. Engineering MC-1200-2X32-F/B-UG is a 2-channel, 32-port L-Band RF signal distribution box housed in a 2U...49691- SKU:
- 49691
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 14.00 LBS
- Brand:
- I.F. Engineering
- Model:
- MC-1200-2X32-F/B-UG
- MPN:
- MC-1200-2X32-F/B-UG
- Type:
- L-Band RF Signal Distribution Box
- SKU:
- 49691
- Number of Channels:
- 2
- Number of Ports:
- 32 output (BNC), 2 input (SMA/F-type)
- Form Factor:
- 2U Rackmount
- Connector Type (Output):
- BNC
- Connector Type (Input):
- SMA / F-type (A and B inputs)
- Frequency Band:
- L-Band
- DC Blocking:
- Yes — internal DC blocking
- Signal Path:
- 1-to-16 splitter per channel (14 dB amplifier + splitter tree)
- Sub-Module 1:
- I.F. Engineering PD-16-LBAND-B (qty 2)
- Sub-Module 2:
- I.F. Engineering AM-701-014-B (qty 2)
- Dimensions:
- 19" x 15" x 3.5"
- Application:
- Satellite IF / SatCom / Microwave / RF signal distribution
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Includes 2x PD-16-LBAND-B and 2x AM-701-014-B sub-modules installed
- Condition Notes:
- I.F. Engineering MC-1200-2X32-F/B-UG L-Band Distribution Box. Powered on and inspected — passed power-on test. Pulled from a working SatCom/RF test environment. All 32 BNC outputs and both inputs intact. Good condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$600.00Was: $1,200.00 -
I.F. Engineering MC-8X32-LB1-F-2 L-Band Multi-Coupler 950-1450MHz 8x32 2U
I.F Engineering
$375.00Was: $750.00I.F. Engineering MC-8X32-LB1-F-2 L-Band Multi-Coupler 950-1450MHz 8x32 2UEight-input, thirty-two-output L-band signal distribution amplifier for satellite and microwave RF applications. Each of the 8...49690- SKU:
- 49690
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 17.00 LBS
- Brand:
- I.F. Engineering
- Model:
- MC-8X32-LB1-F-2
- MPN:
- MC-8X32-LB1-F-2
- Type:
- L-Band Multi-Coupler / Signal Distribution Amplifier
- SKU:
- 49690
- Frequency Range:
- 950 – 1450 MHz (L-Band)
- Number of Inputs:
- 8
- Number of Outputs:
- 32
- Distribution Configuration:
- 8 x 32 (each input split to 4 outputs)
- Form Factor:
- 2U Rackmount
- Power Requirements:
- 120V AC, 50/60 Hz (IEC inlet)
- Connector Type:
- F-Type (female)
- Number of Power Supplies:
- 2 (redundant)
- Power Supply Model:
- Volgen SX100U-24S AC/DC (x2)
- Amplifier Module:
- I.F. Engineering AM-LB2-7 x8 (+12 to +24V)
- Splitter Module:
- I.F. Engineering PD-4X16-LB2-F x2
- Application:
- Satellite IF / SatCom / Microwave / RF Signal Distribution
- Front Panel Indicators:
- 2x PS LED indicators (PS1, PS2 green LEDs)
- Date Code:
- 0118
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes 2x PD-4X16-LB2-F splitters, 8x AM-LB2-7 amplifiers, 2x Volgen SX100U-24S PSUs
- Condition Notes:
- I.F. Engineering MC-8X32-LB1-F-2 L-Band multi-coupler. Inspected, powers on. Pulled from active SatCom/RF test environment. Good condition with light rack wear. All internal sub-components (8x AM-LB2-7, 2x PD-4X16-LB2-F, 2x Volgen PSUs) present.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$375.00Was: $750.00 -
Varian VJC6767S1AKY HPA Controller 01008831-00 115VAC 2U Rackmount Satcom
Varian
$200.00Was: $400.00Varian VJC6767S1AKY HPA Controller 01008831-00 115VAC 2U Rackmount SatcomThe Varian VJC6767S1AKY is a 2U rackmount High Power Amplifier (HPA) controller made by Varian Microwave Equipment Products of...49688- SKU:
- 49688
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 11.00 LBS
- Brand:
- Varian
- Model:
- VJC6767S1AKY
- MPN:
- 01008831-00
- Secondary Model:
- 010008831-00
- Type:
- HPA Controller / Satcom Control Unit
- SKU:
- 49688
- Form Factor:
- 2U Rackmount
- Power Requirements:
- 115VAC
- Power Connector:
- Military-style circular connector (J3)
- Rear Connectors:
- DB15 x2 (J1, J4), large 50-pin D-sub, J3 circular
- Control Modes:
- Manual, Auto, Local, Remote
- Status / Alarms:
- EXT Alarm, HPA 1 Fault, HPA 2 Fault indicators
- Front Panel Controls:
- Power switch, Lamp Test, Control mode switches
- Hardware Revision:
- Rev B (visible on internal module label 010075200)
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Santa Clara, California
- Application:
- Satellite Uplink / HPA Monitoring and Control
- Condition:
- Used – Inspected
- Seller Notes:
- Includes attached ribbon cables and power cable harness
- Condition Notes:
- Varian VJC6767S1AKY HPA Controller — inspected and in good condition. Chassis shows light handling wear. Front panel switches and indicators intact. Rear connectors and ribbon cables present. Power cable included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$200.00Was: $400.00 -
Amphenol AC30147102 HPIB GPIB Cable HP 10833B Style 24-Pin IEEE-488 2m
Amphenol
$28.00Was: $60.00Amphenol AC30147102 HPIB GPIB Cable HP 10833B Style 24-Pin IEEE-488 2mIEEE-488 instrument cable with 24-pin Micro-D connectors at both ends. Used to connect GPIB/HPIB compatible test equipment and...49687- SKU:
- 49687
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Amphenol
- Model:
- AC30147102
- MPN:
- AC30147102
- Type:
- GPIB / HPIB IEEE-488 Instrument Cable
- SKU:
- 49687
- Compatible With:
- HP 10833B style GPIB instruments
- Compatible With 2:
- HP / Agilent / Keysight IEEE-488 instruments
- Interface Type:
- GPIB / HPIB (IEEE-488)
- Connector Type:
- 24-Pin Micro-D (IEEE-488) both ends
- Cable Length:
- 2m / 6.6 ft
- Number of Pins:
- 24
- Standard:
- IEEE-488
- Cable Style:
- HP 10833B Style
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Cable only; inspected and in good condition
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Amphenol AC30147102 GPIB/HPIB cable inspected and in good used condition. Pulled from a working environment. Cable jacket shows light surface scuffing; both 24-pin Micro-D connectors intact, pins appear undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIB
Unbranded
$28.00Was: $60.00GPIB IEEE-488 Cable 1m CEC 01000-90001 HP 10833A Style Straight Connector HPIBIEEE-488 instrument bus cable used to connect GPIB-compatible test equipment, data acquisition systems, and controllers...49685- SKU:
- 49685
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- CEC
- Model:
- 01000-90001
- MPN:
- 01000-90001
- Type:
- GPIB / IEEE-488 Instrument Bus Cable
- SKU:
- 49685
- Compatible With:
- HP 10833A style GPIB instruments and controllers
- Connector Type:
- 24-pin Micro-Ribbon (Amphenol IEEE-488), Straight
- Cable Length:
- 1 Meter (3.3 ft)
- Interface:
- GPIB / IEEE-488 / HPIB
- Number of Connectors:
- 2 (one each end, straight)
- Cable Standard:
- IEEE-488 / IEC-625
- Wire Type:
- AWM 2464
- Temperature Rating:
- 75°C
- Cable Certifications:
- UL (E123143), CSA, Type CL2
- Country/Region of Manufacture:
- Taiwan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- CEC-labeled 1m GPIB cable, HP 10833A style, inspected and in good condition
- Condition Notes:
- CEC 01000-90001 GPIB IEEE-488 1m cable inspected and in good used condition. Jacket clean and intact, both connectors in good shape, no bent pins noted. Pulled from a working lab environment.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
Merrimac PDM-81M-3.95G 8-Way Microwave Power Divider 3.6-4.2 GHz SMA
Merrimac
$45.00Was: $90.00Merrimac PDM-81M-3.95G 8-Way Microwave Power Divider 3.6-4.2 GHz SMA8-way power divider/splitter for C-band microwave applications. Splits a single input signal across eight output ports with SMA...49684- SKU:
- 49684
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Merrimac
- Model:
- PDM-81M-3.95G
- MPN:
- PDM-81M-3.95G
- Type:
- 8-Way Microwave Power Divider / Splitter
- SKU:
- 49684
- Code:
- 596017
- FSCM:
- 12457
- Frequency Range:
- 3.6 to 4.2 GHz
- Center Frequency:
- 3.95 GHz
- Frequency Band:
- C-Band
- Number of Ports:
- 8 Output + 1 Input (9 total SMA ports)
- Connector Type:
- SMA (Female)
- Number of Ways:
- 8-Way
- Dimensions:
- 5.25" x 4.25" x 0.5"
- Form Factor:
- Benchtop / Panel Mount
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no cables or accessories included.
- Condition Notes:
- Merrimac PDM-81M-3.95G 8-Way Microwave Power Divider. Used, inspected, pulled from a working environment. Housing shows minor surface wear; all SMA connectors appear intact. Good used condition.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
MCS 4009-0000G1 Microwave Waveguide Port Assembly X-Ku Band WR-75 w/Fans
MCS
$275.00Was: $550.00MCS 4009-0000G1 Microwave Waveguide Port Assembly X-Ku Band WR-75 w/FansMicrowave waveguide port assembly featuring four WR-75 ports operating across the X-Ku band frequency range. Includes two Sunon...49682- SKU:
- 49682
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 15.00 LBS
- Brand:
- MCS (Microwave Components and Systems Inc.)
- Model:
- 4009-0000G1
- MPN:
- 4009-0000G1
- Type:
- Microwave Waveguide Port Assembly
- SKU:
- 49682
- Frequency Range:
- 10 to 15 GHz (X-Ku Band)
- Waveguide Size:
- WR-75
- Waveguide Aperture:
- 19.05 mm x 9.525 mm
- Number of Waveguide Ports:
- 4
- Cooling Fans:
- 2x Sunon Electric Cooling Fans
- Fan Voltage:
- 115V AC, 50/60 Hz
- Fan Make:
- Sunon
- Frequency Band:
- X-Band / Ku-Band
- Port Labels:
- Port A, Port B, Port C (labeled on assembly)
- Center Frequency (Fo):
- 12769 MHz (labeled on assembly)
- Bandwidth (BW):
- 36 MHz (labeled on assembly)
- Country/Region of Manufacture:
- United States (Marlboro, MA)
- Condition:
- Used – Inspected
- Seller Notes:
- Includes 4 WR-75 waveguide ports and 2 Sunon cooling fans mounted on baseplate
- Form Factor:
- Panel/Baseplate Assembly
- Application:
- Satellite Communications, Microwave RF Systems
- Condition Notes:
- MCS 4009-0000G1 WR-75 X-Ku Band Waveguide Port Assembly inspected and in good used condition. Flanges intact, fans present. Light surface wear and one flange contact mark visible. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$275.00Was: $550.00 -
Scientific Atlanta 9325 C-Band Block Converter 3.7-4.2 GHz to 950-1450 MHz
Scientific Atlanta
$35.00Was: $70.00Scientific Atlanta 9325 C-Band Block Converter 3.7-4.2 GHz to 950-1450 MHzC-band block converter that shifts satellite downlink signals from 3.7–4.2 GHz to intermediate frequency 950–1450 MHz for...49666- SKU:
- 49666
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Scientific-Atlanta
- Model:
- 9325
- MPN:
- 9325
- Type:
- C-Band Block Converter
- SKU:
- 49666
- Input Frequency Range:
- 3.7 – 4.2 GHz
- Output Frequency Range:
- 950 – 1450 MHz
- Frequency Band:
- C-Band
- Input Connector:
- N-Type Female
- Output Connector:
- F-Type Female
- Housing / Enclosure:
- White painted aluminum, weatherproof
- Form Factor:
- Inline / Outdoor Mount
- Seller Notes:
- Unit only; no additional accessories included.
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected, appears in good condition
- Condition Notes:
- Scientific Atlanta 9325 C-Band Block Converter. Inspected and in good condition. Light paint chipping on housing corner. N-type and F-type connectors clean and intact. Label fully legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
DX Antenna DSA-543 C-Band RF Down Converter 3.7-4.2GHz to 950-1450MHz Satcom
DX Antenna
$60.00Was: $125.00DX Antenna DSA-543 C-Band RF Down Converter 3.7-4.2GHz to 950-1450MHz SatcomThe DX Antenna DSA-543 is a C-Band RF down converter designed to receive signals from geostationary C-Band satellites. It...49664- SKU:
- 49664
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- DX Antenna
- Model:
- DSA-543
- MPN:
- DSA-543
- Type:
- C-Band RF Down Converter
- SKU:
- 49664
- Input Frequency Range:
- 3.7 ~ 4.2 GHz
- Output Frequency Range:
- 950 ~ 1450 MHz
- Input Impedance:
- 50 Ohm
- Output Impedance:
- 75 Ohm
- DC Power Supply:
- +15 ~ +24 VDC
- Input Connector:
- N-Type Female
- Output Connector:
- F-Type or N-Type (see photos)
- Frequency Band:
- C-Band
- Form Factor:
- Outdoor Weatherproof Enclosure
- Enclosure Material:
- Die-Cast Aluminum
- Country/Region of Manufacture:
- Japan
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from a working satellite installation. No cables included.
- Condition Notes:
- DX Antenna DSA-543 C-Band RF Down Converter. Inspected, in good used condition. Pulled from a working satellite installation. Enclosure shows light wear from outdoor use; connectors intact. No cables included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$60.00Was: $125.00 -
Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz Satcom
Miteq
$1,100.00Was: $2,200.00Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit 70 MHz-6.13 GHz SatcomC-Band up/downconverter RF unit for satellite ground station applications. Converts between 70 MHz intermediate frequency...49656- SKU:
- 49656
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 42.00 LBS
- Brand:
- Miteq
- Model:
- U/D-9502-61289
- Secondary Model:
- U/D-9502-57687
- MPN:
- U/D-9502-61289
- SKU:
- 49656
- Type:
- C-Band Up/Downconverter RF Unit
- Condition:
- Used – Pulled from Working Environment
- Frequency Range:
- 70 MHz – 6.13 GHz
- IF Frequency:
- 70 MHz
- RF Frequency (Uplink):
- 5.845–6.425 GHz (C-Band TX)
- RF Frequency (Downlink):
- 3.625–4.2 GHz (C-Band RX)
- Enclosure Type:
- Outdoor Weatherproof Enclosure
- Form Factor:
- Outdoor Enclosure / Wall-Mount
- Dimensions:
- 19" x 17" x 6.5"
- Connector Types:
- Multi-pin circular (J1–J18), SMA/coax RF ports
- Interfaces:
- Remote Interface, Status/Redundancy Alarm, U-Link, DC Power Input
- Control Interface:
- Remote Interface (J6), U-Link (J16/J17)
- Alarm Outputs:
- Status/Redundancy Alarm; UP RF LO, DN RF LO, IF LO, SSPA, LNA, XMT MUTE
- Front Panel:
- LED display, numeric keypad, REMOTE/TRANSMIT/RECEIVE/MEMORY buttons
- Country/Region of Manufacture:
- United States
- Included: Control Board:
- Miteq M/N 117908 (Qty 1)
- Included: IF/Upconverter Module:
- Miteq M/N UDM9550-57687, 70 MHz (Qty 1)
- Included: BPF C-Band RX:
- Miteq M/N FLT-112385, 3.625–4.2 GHz (Qty 1)
- Included: BPF C-Band TX:
- Miteq M/N FLT-112387, 5.845–6.425 GHz (Qty 1)
- Included: NFS Converter Module:
- Miteq M/N NFS 4.625-5.205-100KS-57687 (Qty 2)
- Included: 1080 MHz LO Module:
- Miteq M/N 113938-1.08-57687, 1080 MHz (Qty 1)
- Included: 1150 MHz LO Module:
- Miteq M/N 117503-1150, 1150 MHz (Qty 1)
- Included: Quartz Oscillator:
- Wenzel Associates 500-02755/117321, 10 MHz (Qty 1)
- Included: RF Tray:
- Miteq M/N RF TRAY / 57687 (Qty 1)
- Application:
- Satellite Ground Station, VSAT, Teleport, C-Band SCPC/TDMA
- Seller Notes:
- Complete RF unit in outdoor enclosure with full internal module set as listed.
- Condition Notes:
- Miteq U/D-9502-61289 C-Band Up/Downconverter RF Unit pulled from a working satellite ground station environment, in use and functional. Inspected; good condition with normal field wear on enclosure exterior.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,100.00Was: $2,200.00 -
IF Engineering PS-24-6-2A 24VDC 2A L-Band 6-Port DC Distribution Amplifier
I.F Engineering
$150.00Was: $300.00IF Engineering PS-24-6-2A 24VDC 2A L-Band 6-Port DC Distribution AmplifierL-Band DC distribution amplifier with dual internal power supplies. Provides regulated 24VDC at 2A across six output ports...49653- SKU:
- 49653
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 16.00 LBS
- Brand:
- IF Engineering
- Model:
- PS-24-6-2A
- MPN:
- PS-24-6-2A
- Secondary Model:
- CM242
- Type:
- L-Band DC Distribution Amplifier
- SKU:
- 49653
- Output Voltage:
- 24VDC
- Output Current:
- 2A
- Number of Output Ports:
- 6
- AC Input:
- AC Input via IEC connector, 4A fuse
- Internal Power Supplies:
- Dual AAK CM242 DC Power Supplies
- Frequency Band:
- L-Band
- Form Factor:
- Rackmount, 2U
- Front Panel Controls:
- Power LED, ON/OFF toggle switch per supply module
- DC Output Connectors:
- 6 x DC output jacks (rear panel)
- Condition:
- Used – Inspected
- Seller Notes:
- Includes dual internal AAK CM242 DC power supplies; 6 DC output ports
- Country/Region of Manufacture:
- United States
- Condition Notes:
- IF Engineering PS-24-6-2A L-Band 6-Port DC Distribution Amplifier. Inspected and in good used condition. Minor surface wear on chassis. Both internal AAK CM242 supplies present. All 6 DC output ports intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
LNR Communications 506010000-4 C-Band Upconverter PAM-C05 602 RF Satcom 1U
LNR Communications
$1,100.00Was: $2,200.00LNR Communications 506010000-4 C-Band Upconverter PAM-C05 602 RF Satcom 1UC-Band RF upconverter module designed for satellite communication uplink applications. Converts baseband or intermediate...49652- SKU:
- 49652
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 22.00 LBS
- Brand:
- LNR Communications
- Model:
- 506010000-4
- MPN:
- 506010000-4
- Secondary Model:
- PAM-C05 602
- Type:
- C-Band RF Upconverter
- SKU:
- 49652
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes AC power cord. Pulled from working INTELSAT environment.
- Country/Region of Manufacture:
- United States
- Form Factor:
- 1U Rackmount
- Polarization:
- Circular
- Frequency Band:
- C-Band
- Signal Type:
- RF / Satellite
- Application:
- Satellite Communications (Satcom) Uplink
- Front Panel Controls:
- XTAL ADJ, PLO ADJ, FREQ MON, XTAL ADJ1, XTAL ADJ2
- Hardware Revision:
- Rev. M
- Compatible With:
- INTELSAT satellite uplink systems
- Rear Connectors:
- BNC, DB-25 parallel connector, AC inlet
- Condition Notes:
- LNR Communications 506010000-4 C-Band Upconverter. Inspected and in good condition; pulled from a working INTELSAT satcom environment. Light rack-service wear. AC power cord included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$1,100.00Was: $2,200.00 -
Varian VJW2740-10-1 Computer Interface Module 01006797-10 Rackmount 120VAC
Varian
$125.00Was: $250.00Varian VJW2740-10-1 Computer Interface Module 01006797-10 Rackmount 120VACThis is a 2U rackmount computer interface module designed to connect host computers to Varian microwave equipment systems. It...49647- SKU:
- 49647
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 12.00 LBS
- Brand:
- Varian
- Model:
- VJW2740-10-1
- MPN:
- 01006797-10
- Type:
- Computer Interface Module
- SKU:
- 49647
- Seller Notes:
- Unit only; no cables included. Rack ears attached.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rack Mount, 2U
- Power Requirements:
- 120 VAC
- Connector Types:
- Multiple parallel D-sub (36-pin & 15-pin); circular mil-spec (J10)
- Number of I/O Ports:
- 6 (J1–J6 rear panel) + J10 power/signal connector
- Interface Type:
- Parallel D-sub (IEEE-488 / GPIB compatible style)
- Manufacturer Division:
- Varian Microwave Equipment Products
- Compatible With:
- Varian microwave equipment systems
- Condition:
- Used – Inspected, appears in good condition
- Condition Notes:
- Varian VJW2740-10-1 Computer Interface Module inspected and in good condition. Front panel clean, rear D-sub and J10 connectors appear intact. Light surface wear on chassis. Not powered or tested at our facility. Sold as-inspected.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$125.00Was: $250.00