Description
Varian VJW2740-10-1 Computer Interface Module 01006797-10 Rackmount 120VAC
This is a 2U rackmount computer interface module designed to connect host computers to Varian microwave equipment systems. It provides parallel digital communication via multiple D-sub connectors and a mil-spec J10 power/signal connector.
Specifications & What's Included
- Model: VJW2740-10-1 | MPN: 01006797-10
- Form Factor: 2U Rackmount with attached rack ears
- Power: 120 VAC
- I/O: 6 rear panel D-sub ports (J1–J6) + J10 mil-spec connector
- Connectors: 36-pin and 15-pin parallel D-sub (GPIB-style), circular mil-spec J10
- Unit only; no cables included
Applications
This interface module was used in Varian microwave equipment systems to enable remote operation and data acquisition from external computers. It supported IEEE-488/GPIB-compatible command protocols common in laboratory and industrial microwave applications. The module typically integrated into larger test systems, vacuum equipment, or RF measurement platforms where computer control of microwave generators and measurement instruments was required.
This Varian VJW2740-10-1 Computer Interface Module has been inspected and appears to be in good condition. The front panel is clean with intact labeling and a functional-looking ON/OFF toggle switch. The rear panel shows the D-sub I/O connectors and J10 circular power connector with no obvious damage or bent pins visible in the photos. The chassis exterior shows light surface wear and minor scuffing typical of rack-mounted equipment from this era, but nothing significant. The unit was not powered or tested at our facility; it is sold in as-inspected condition. Please view our photo set and contact us if you have any questions.
Warranty Information
Additional Information
Brand: |
Varian |
Model: |
VJW2740-10-1 |
MPN: |
01006797-10 |
Type: |
Computer Interface Module |
SKU: |
49647 |
Seller Notes: |
Unit only; no cables included. Rack ears attached. |
Country/Region of Manufacture: |
United States |
Form Factor: |
Rack Mount, 2U |
Power Requirements: |
120 VAC |
Connector Types: |
Multiple parallel D-sub (36-pin & 15-pin); circular mil-spec (J10) |
Number of I/O Ports: |
6 (J1–J6 rear panel) + J10 power/signal connector |
Interface Type: |
Parallel D-sub (IEEE-488 / GPIB compatible style) |
Manufacturer Division: |
Varian Microwave Equipment Products |
Compatible With: |
Varian microwave equipment systems |
Condition: |
Used – Inspected, appears in good condition |
Condition Notes: |
Varian VJW2740-10-1 Computer Interface Module inspected and in good condition. Front panel clean, rear D-sub and J10 connectors appear intact. Light surface wear on chassis. Not powered or tested at our facility. Sold as-inspected. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |