Uni-Solar

Uni-Solar

  • Uni-Solar PVL-116 complete unit – full panel length showing flexible construction Uni-Solar PVL-116 flexible solar panel front – laminated amorphous cell surface

    Uni-Solar PVL-116 116W 24V Amorphous Flexible Solar Panel UL

    Uni-Solar

    $125.00
    Was: $250.00
    Uni-Solar PVL-116 116W 24V Amorphous Flexible Solar Panel UL The Uni-Solar PVL-116 is a 116-watt amorphous thin-film flexible solar panel designed for 24V DC systems. This lightweight, conformable...
    53312
    SKU:
    53312
    Availability:
    In stock and ready to ship within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-116
    MPN:
    PVL-116
    SKU:
    53312
    Condition:
    New – Old Stock
    Seller Notes:
    Sold as single panel. Solder point connections only – no connectors included. Adhesive liner intact; cells undamaged.
    Country of Manufacture:
    United States
    Form Factor:
    Flexible laminate with peel-and-stick adhesive backing
    Cell Technology:
    Amorphous Thin-Film
    Maximum Power (Pmax):
    116 Watts
    Nominal Operating Voltage:
    24V DC
    Peak Power Voltage (Vmp):
    30V
    Peak Power Current (Imp):
    3.88A
    Open Circuit Voltage (Voc):
    43.2V
    Short Circuit Current (Isc):
    4.8A
    Panel Length (inches):
    197.3 in
    Panel Width (inches):
    15.5 in
    Panel Thickness (inches):
    0.2 in
    Panel Length (feet):
    16.4 ft
    Panel Width (feet):
    1.29 ft
    Electrical Connector Type:
    Solder point – no connectors included
    Wind Resistance Rating:
    Category 3 Hurricane – 130 MPH
    Bypass Diode Protection:
    Yes – per-cell bypass diodes
    Mounting Method:
    Peel-and-stick adhesive – no hardware required
    Compatible With:
    Membrane and metal roofing systems
    Certifications:
    UL Listed
    Manufacture Date:
    August 2010
    Type:
    Amorphous Thin-Film Flexible Solar Panel
    Maximum Power Output:
    116 Watts
    Panel Length:
    197.3 inches (16.4 feet)
    Panel Width:
    15.5 inches (1.29 feet)
    Panel Thickness:
    0.2 inches
    Country/Region of Manufacture:
    United States
    Condition Notes:
    <p><strong>Condition: New – Old Stock</strong></p><p>This Uni-Solar PVL-116 116W 24V flexible solar panel is new, never deployed. It is original stock from the 2012 Uni-Solar liquidation, manufactured in August 2010.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • Uni-Solar PVL-128 Carton 128W Flexible Amorphous Solar Panels USED Qty 30 Uni-Solar PVL-128 Carton 128W Flexible Amorphous Solar Panels USED Qty 30

    Uni-Solar PVL-128 128W Flexible Amorphous Solar Panels 24V Metal Roofing Qty 30

    Uni-Solar

    $2,000.00
    Was: $4,000.00
    Uni-Solar PVL-128 128W Flexible Amorphous Solar Panels 24V Metal Roofing Qty 30This is a carton of 30 Uni-Solar PVL-128 128-watt flexible amorphous silicon solar panels. The PVL-128 is a...
    53179
    SKU:
    53179
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    520.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-128
    MPN:
    PVL-128
    Type:
    Flexible Amorphous Silicon Thin Film Solar Panel
    SKU:
    53179
    Quantity in Lot:
    30 Panels
    Maximum Power (Pmax):
    128 W
    Nominal Operating Voltage:
    24 V
    Maximum Power Voltage (Vmpp):
    33 V
    Maximum Power Current (Impp):
    3.88 A
    Open Circuit Voltage (Voc):
    47.6 V
    Short Circuit Current (Isc):
    4.8 A
    Panel Technology:
    Amorphous Silicon (a-Si)
    Flexibility:
    Flexible
    Mounting Type:
    Adhesive Peel-and-Stick — No Penetrations Required
    Panel Length:
    18 ft (216 in)
    Panel Width:
    1.29 ft (15.5 in)
    Panel Thickness:
    0.2 in
    Compatible Roofing Types:
    Metal, TPO, EPDM, Membrane
    Connector Type:
    Uni-Solar Proprietary
    Bypass Diodes:
    Integrated — max 4.5% power loss when shaded
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Carton of 30 panels; connectors included on panel ends
    Condition Notes:
    Carton of 30 Uni-Solar PVL-128 128W flexible amorphous solar panels. Inspected and in good condition. Pulled from a working environment. Panel roll intact; connectors present. Carton shows external wear/moisture staining — cosmetic only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,000.00
    Was: $4,000.00
  • Uni-Solar PVL-128 128W flexible solar laminate roll inside open carton on pallet, top-down angle showing layered dark laminate material Uni-Solar PVL-128 128W flexible solar laminate roll inside open carton on pallet, top-down angle showing layered dark laminate material

    Uni-Solar PVL-128 128W Flexible Amorphous Solar Panel Laminate 24V Qty 20

    Uni-Solar

    $2,100.00
    Was: $4,200.00
    Uni-Solar PVL-128 128W Flexible Amorphous Solar Panel Laminate 24V Qty 20Lot of 20 used flexible amorphous silicon solar panel laminates rated at 128W maximum power. These adhesive-backed panels...
    53178
    SKU:
    53178
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    420.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-128
    MPN:
    PVL-128
    Type:
    Flexible Amorphous Solar Panel Laminate
    SKU:
    53178
    Quantity:
    20 panels per lot
    Maximum Power (Pmax):
    128 Watts (STC)
    Nominal Operating Voltage:
    24V
    Maximum Power Voltage (Vmpp):
    33.0 V
    Maximum Power Current (Impp):
    3.88 A
    Open Circuit Voltage (Voc):
    47.6 V
    Short Circuit Current (Isc):
    4.8 A
    Max Series Fuse Rating:
    8 A
    NOCT Power Output:
    100 W
    NOCT Vmp:
    30.8 V
    NOCT Imp:
    3.24 A
    NOCT Voc:
    43.5 V
    NOCT Temperature:
    46°C
    Length:
    5486 mm (216 in / 18 ft)
    Width:
    394 mm (15.5 in)
    Depth:
    4 mm (0.2 in)
    Cell Type:
    Triple-junction amorphous silicon, 356mm x 239mm
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer adhesive-sealant
    Output Cables:
    4mm² (12 AWG), 560mm (22 in), quick-connect
    Bypass Diodes:
    Connected across every solar cell
    Max System Voltage:
    600 VDC (UL)
    Certifications:
    UL 1703, IEC 61646 v1, IEC 61730 TUV pending
    Installation Method:
    Adhesive-backed laminate, no roof penetrations
    Compatible Substrates:
    EPDM, TPO, PVDF coated metal roofing panels
    Min Roof Slope:
    5:12 (3°)
    Max Roof Slope:
    21:12 (60°)
    Installation Temperature Range:
    10°C to 40°C (50°F to 100°F)
    Max Operating Temperature:
    85°C (185°F)
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Lot of 20 panels. Includes output cables with quick-connect terminals on each panel.
    Condition Notes:
    Lot of 20 Uni-Solar PVL-128 128W flexible solar laminates inspected and in good used condition. Pulled from a working installation. Photos show surface scuffing and some junction box adhesive wear on visible panels. Output cables present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,100.00
    Was: $4,200.00
  • Close-up of Uni-Solar PVL-116 panels coiled inside open cardboard box showing panel edges and MC3 cable loop visible Close-up of Uni-Solar PVL-116 panels coiled inside open cardboard box showing panel edges and MC3 cable loop visible

    Uni-Solar PVL-116 116W 24V Flexible Amorphous Solar Panel MC3 Qty 20

    Uni-Solar

    $2,200.00
    Was: $4,400.00
    Uni-Solar PVL-116 116W 24V Flexible Amorphous Solar Panel MC3 Qty 20Lot of 20 flexible amorphous thin-film solar panels rated at 116W per unit, totaling 2,320W array capacity. These glass-free...
    53177
    SKU:
    53177
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-116
    MPN:
    PVL-116
    Type:
    Flexible Amorphous Thin-Film Solar Panel Laminate
    SKU:
    53177
    Quantity:
    20 panels
    Power Output (Pmax):
    116 Watts per panel
    Total Array Power:
    2,320 Watts (20 panels)
    Nominal Operating Voltage:
    24V
    Peak Power Voltage (Vmp):
    30 Volts
    Peak Power Current (Imp):
    3.88 Amps
    Open Circuit Voltage (Voc):
    43.2 Volts
    Short Circuit Current (Isc):
    4.8 Amps
    Panel Length:
    16.44 ft (197.3 in)
    Panel Width:
    1.3 ft (15.5 in)
    Panel Thickness:
    0.12 in
    Panel Weight:
    16.5 lbs per panel
    Cell Technology:
    Triple-junction amorphous silicon thin film
    Construction:
    Glass-free flexible laminate
    Installation Method:
    Peel-and-stick adhesive laminate
    Connector Type:
    MC3
    Compatible Roof Types:
    Metal (Galvalume), membrane, low-slope roofs
    Certifications:
    UL approved for Galvalume steel roofs
    Wind Resistance:
    Category 3 hurricane (up to 130 MPH)
    Bypass Diodes:
    Yes — per cell, reduces shading loss to <4.5%
    Seller Notes:
    Lot of 20 panels with MC3 cables; panels coiled and boxed on pallet
    Country/Region of Manufacture:
    United States
    Form Factor:
    Flexible laminate roll
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    Lot of 20 Uni-Solar PVL-116 116W 24V flexible amorphous solar panels inspected and in good used condition. Pulled from a working installation. MC3 cables present. Surface dust and residue consistent with prior outdoor use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,200.00
    Was: $4,400.00
  • Uni-Solar PVL-136 136W flexible solar panel partially unrolled on floor with MC3 output cables visible Uni-Solar PVL-136 flexible solar panel rolled into a cylinder showing copper bus bars and black polymer backing

    Uni-Solar PVL-136 136W Flexible Amorphous Solar Panel 24V PowerBond MC3

    Uni-Solar

    $175.00
    Was: $350.00
    Uni-Solar PVL-136 136W Flexible Amorphous Solar Panel 24V PowerBond MC3Flexible amorphous thin-film solar panel rated at 136 watts maximum power. Designed for direct adhesion to roofing surfaces...
    52644
    SKU:
    52644
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    16.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-136
    MPN:
    PVL-136
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    SKU:
    52644
    Country/Region of Manufacture:
    United States
    Manufacturer:
    United Solar Ovonic
    Maximum Power (Pmax):
    136 Watts
    Nominal Operating Voltage:
    24V
    Max Power Voltage (Vmpp):
    33V
    Max Power Current (Impp):
    4.1A
    Open Circuit Voltage (Voc):
    46.2V
    Short Circuit Current (Isc):
    5.1A
    Max System Voltage:
    600V
    Cell Technology:
    Amorphous Silicon (Triple-Junction)
    Series:
    PowerBond PVL
    Connector Type:
    MC3
    Backing Type:
    No Sticky Backing (PowerBond)
    Hurricane Rating:
    Category 3 – 130 MPH Uplift Resistant
    Bypass Diodes:
    Yes – per cell, limits shade loss to <4.5%
    Roofing Compatibility:
    Membrane and metal roofing systems
    Installation Method:
    No hardware – direct adhesion to roofing surface
    Condition:
    New – Old Stock, temperature-controlled storage
    Seller Notes:
    New old stock pulled from sealed carton; includes MC3 output cables
    Condition Notes:
    Uni-Solar PVL-136 136W flexible solar panel — new old stock from sealed carton of 30. Stored in temperature-controlled warehouse. New condition, no use or wear. MC3 cables attached. Made in USA. No longer in production.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Uni-Solar AF5 4218FG flexible amorphous solar cell — active side showing dark blue thin-film surface and tabbed ribbon connector at top edge Uni-Solar AF5 4218FG flexible solar cell — reverse side showing bare stainless steel substrate backing

    Uni-Solar AF5 4218FG Amorphous Solar Cell 2V 0.35A Flexible Stainless Steel

    Uni-Solar

    $30.00
    Was: $60.00
    Uni-Solar AF5 4218FG Amorphous Solar Cell 2V 0.35A Flexible Stainless Steel 25-PackThis listing is for a pack of 25 Uni-Solar AF5 4218FG flexible amorphous thin-film solar cells on a stainless steel...
    52519
    SKU:
    52519
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    4.00 LBS
    Brand:
    Uni-Solar
    Model:
    AF5
    MPN:
    4218FG
    Type:
    Amorphous Thin-Film Flexible Solar Cell
    SKU:
    52519
    Cell Technology:
    Amorphous Silicon (a-Si) Thin Film
    Substrate Material:
    Flexible Stainless Steel
    Nominal Voltage:
    2 V
    Nominal Current:
    0.35 A
    Current Range (MPPT):
    0.35 A – 0.40 A
    Cell Grade:
    Q Grade C
    Cell Size (Approx.):
    7 in x 1.5 in
    Quantity per Pack:
    25 cells
    Connection Type:
    Tabbed ribbon leads (flex connector)
    Form Factor:
    Flexible / Rollable
    Application:
    DIY Solar, Custom Panel Assembly, Off-Grid
    Condition:
    New – Open Box, unused
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Pack of 25 new, unused cells. Tested to produce ~2V at 0.35–0.40A MPPT.
    Condition Notes:
    Uni-Solar AF5 4218FG flexible solar cells — pack of 25, new and unused. Tested to ~2V / 0.35–0.40A MPPT. Open box; cells are in new, unused condition with no wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $30.00
    Was: $60.00
  • Uni-Solar AF5 4218 FG amorphous flexible solar cell – front active surface view showing dark blue thin-film coating Uni-Solar AF5 4218 FG flexible solar cell – reverse side showing stainless steel substrate and ribbon tab

    Uni-Solar AF5 4218 FG Amorphous Flexible Solar Cells Grade C Lot of 400

    Uni-Solar

    $600.00
    Was: $975.00
    Uni-Solar AF5 4218 FG Amorphous Flexible Solar Cells Grade C Lot of 400Amorphous silicon flexible thin-film solar cells manufactured by Uni-Solar. Each cell measures approximately 7 inches by 1.5...
    52518
    SKU:
    52518
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Uni-Solar
    Model:
    AF5 4218 FG
    MPN:
    AF5 4218 FG
    SKU:
    52518
    Type:
    Amorphous Flexible Thin-Film Solar Cell
    Cell Grade:
    Grade C (Q Grade)
    Quantity:
    400 cells per carton
    Cell Size (Approx):
    7 in x 1.5 in
    Cell Technology:
    Amorphous Silicon (a-Si)
    Substrate:
    Stainless Steel
    Flexibility:
    Flexible
    Condition:
    New – Old Stock (factory sealed carton)
    Seller Notes:
    Carton of 400 new unused cells; sourced from Uni-Solar factory at 2013 closure
    Country/Region of Manufacture:
    United States
    Application:
    DIY Solar, Custom Solar Panel Fabrication
    Compatible With:
    DIY solar panel builds, flexible solar module lamination
    Condition Notes:
    New unused old stock from Uni-Solar's 2013 factory closure. Carton of 400 cells, individually wrapped, never used. Date codes 12/28-29/11. Grade C (Q Grade). Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $600.00
    Was: $975.00
  • Uni-Solar PVL-128 flexible solar panels coiled in factory carton on pallet — purple amorphous cell surface visible Uni-Solar PVL-128 official technical data sheet showing model name, features, and UL listing details

    Uni-Solar PVL-128 128W 24V Flexible Peel-Stick Solar Panel Carton 30 3840W

    Uni-Solar

    $2,800.00
    Was: $5,600.00
    Uni-Solar PVL-128 128W 24V Flexible Peel-Stick Solar Panel Carton 30 3840WThis listing is for a factory carton of 30 Uni-Solar PVL-128 flexible thin-film amorphous silicon solar panels, totaling...
    52267
    SKU:
    52267
    Availability:
    Usually ships within 1-2 business days via freight.
    Weight:
    560.00 LBS
    Spec Sheet:
    Unisolar PVL-128 Solar Panel Spec Sheet
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-128
    MPN:
    PVL-128
    Type:
    Flexible Thin-Film Amorphous Silicon Solar Panel
    SKU:
    52267
    Quantity in Carton:
    30 panels per carton
    Max Power Current (Impp):
    3.88 A
    Open Circuit Voltage (Voc):
    47.6 V
    Short Circuit Current (Isc):
    4.8 A
    Maximum Series Fuse Rating:
    8 A
    Panel Dimensions:
    216 in L x 15.5 in W x 0.2 in thick (18 ft x 1.29 ft)
    Cell Technology:
    Triple-junction amorphous silicon (14 x 9.4 in cells)
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer adhesive-sealant
    By-pass Diodes:
    Yes — connected across every solar cell
    Electrical Connectors:
    Bottom-facing solder points (no cables)
    UL Listing:
    UL 1703 Listed to 600 VDC
    IEC Certification:
    IEC 61646 v1 certified
    Wind Resistance:
    Category 3 hurricane uplift resistant (130 MPH)
    Installation Method:
    Peel-and-stick adhesive — no hardware required
    Compatible Substrates:
    Membrane roofing, metal roofing (PVDF/Galvalume/Zincalume)
    Minimum Slope:
    5/12 (3 degrees)
    Maximum Slope:
    21/12 (60 degrees)
    Operating Temperature Range:
    -10°C to +40°C (50°F to 100°F)
    Max Roof Temperature:
    85°C (185°F)
    Production Pmax Tolerance:
    +/- 5%
    Seller Notes:
    Carton of 30 new panels with solder points; no cables included
    Country/Region of Manufacture:
    United States
    Form Factor:
    Flexible roll laminate — peel-and-stick
    Data Sheet Part Number:
    #AA5-3851-02
    Condition Notes:
    Uni-Solar PVL-128 128W flexible solar panels — carton of 30, new/unused, direct from 2012 Unisolar facility liquidation. Never installed. Original factory carton, solder point connectors, no cables. Panels appear clean and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $2,800.00
    Was: $5,600.00
  • Uni-Solar PVL-24 flexible amorphous solar panel shown partially curled open, top cell surface and solder points visible Uni-Solar PVL-24 flexible solar panel laid flat showing white adhesive backing side

    Uni-Solar PVL-24 24W 5V Flexible Amorphous Solar Panel 36in Rollable Solder

    Uni-Solar

    $40.00
    Was: $125.00
    Uni-Solar PVL-24 24W 5V Flexible Amorphous Solar Panel 36in Rollable Solder PointsThe Uni-Solar PVL-24 is a lightweight, flexible 24-watt amorphous thin-film solar panel made by United Solar Ovonic...
    51944
    SKU:
    51944
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    8.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-24
    MPN:
    PVL-24
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    SKU:
    51944
    Seller Notes:
    No cables or junction box included. Top-facing solder points for DIY wiring.
    Country/Region of Manufacture:
    United States
    Power Output:
    24W
    Voltage (Vmp):
    5V
    Panel Length:
    36 inches (3 feet)
    Number of Cells:
    3
    Cell Technology:
    Amorphous Silicon (a-Si) Thin Film
    Panel Series:
    PVL Series
    Flexibility:
    Rollable to approximately 6 inches in diameter
    Mounting:
    Adhesive backing (pressure-sensitive)
    Connection Method:
    Top-facing solder points
    Wind Rating:
    Category 3 (130 MPH) hurricane uplift resistant
    Cables Included:
    No
    Junction Box Included:
    No
    Compatible With:
    Golf carts, RVs, vans, boats, experimental EVs, backpacking
    Application:
    Off-grid, DIY solar charging, vehicle rooftop, portable solar
    Condition Notes:
    Uni-Solar PVL-24 24W Flexible Amorphous Solar Panel — new and unused. The panel shows no wear or use, and the adhesive backing cover is intact. This 36-inch panel comes with three amorphous cells and is ready to wire via solder points on top; no
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $125.00
  • Uni-Solar PVL-128 flexible amorphous solar panel rolled up showing peel-and-stick adhesive backing and thin laminate profile Uni-Solar PVL-128 Solar Laminate PVL-Series technical data sheet showing model number, features, and construction characteristics

    Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel Peel Stick Solder

    Uni-Solar

    $125.00
    Was: $250.00
    Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel Peel Stick SolderFlexible thin-film amorphous silicon solar panel rated at 128W nominal output. Features peel-and-stick adhesive installation...
    51942
    SKU:
    51942
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    20.00 LBS
    Spec Sheet:
    Unisolar PVL-128 Solar Panel Spec Sheet
    Brand:
    Uni-Solar
    Model:
    PVL-128
    MPN:
    PVL-128
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    Part Number:
    AA5-3851-02
    SKU:
    51942
    Manufacturer:
    United Solar Ovonic
    Condition:
    New – Unused, New Old Stock from Factory Liquidation
    Seller Notes:
    New old stock; sold as single panels from factory cartons of 30
    Country/Region of Manufacture:
    United States
    Maximum Power (Pmax):
    128 Watts
    Nominal Operating Voltage:
    24 V
    Max Power Voltage (Vmpp):
    33.0 V
    Max Power Current (Impp):
    3.88 A
    Open Circuit Voltage (Voc):
    47.6 V
    Short Circuit Current (Isc):
    4.8 A
    Maximum Series Fuse Rating:
    8 A
    NOCT Power Output:
    100 W
    NOCT Vmpp:
    30.8 V
    NOCT Impp:
    3.24 A
    NOCT Voc:
    43.5 V
    NOCT Isc:
    3.9 A
    NOCT Temperature:
    46°C
    Solar Cell Type:
    Amorphous Silicon (Triple-Junction)
    Cell Size:
    356 mm x 239 mm (14" x 9.4")
    Panel Length:
    216 in (5486 mm / 18 ft)
    Panel Width:
    15.5 in (394 mm)
    Panel Depth/Thickness:
    0.2 in (4 mm)
    Electrical Connector Type:
    Solder Points (bottom-facing, no quick-connect terminals)
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer adhesive-sealant with microbial inhibitor
    Bypass Diodes:
    Connected across every solar cell
    Installation Method:
    Peel-and-stick adhesive; no penetrations or hardware required
    Suitable Roof Types:
    Membrane (EPDM/TPO) and metal (Galvalume/Zincalume/PVDF)
    Wind Resistance:
    Category 3 Hurricane Uplift Resistant (130 MPH)
    Max System Voltage:
    600 VDC (UL 1703 Listed)
    Operating Temperature Range:
    -10°C to +40°C (50°F to 100°F)
    Maximum Roof Temperature:
    85°C (185°F)
    Minimum Roof Slope:
    5:8 (3°)
    Maximum Roof Slope:
    21:12 (60°)
    Certifications:
    UL 1703, IEC 61646 v1, IEC 61646 v2 (pending), IEC 61730
    UL Fire Rating:
    Class A (Slope 2/12), Class B (Slope 3/12), Class C (Unlimited Slope)
    Form Factor:
    Flexible Laminate Roll
    Compatible With:
    Grid-tie and off-grid systems up to 600 VDC
    Power Output Tolerance:
    +5% / -5%
    Condition Notes:
    Uni-Solar PVL-128 128W flexible solar panel — new and unused, new old stock from 2012 factory liquidation. Bottom solder-point variant. Stored in factory cartons; no signs of use or wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $125.00
    Was: $250.00
  • ECD Ovonics QA4-850-000 MC4 Solar Connector Reliability Tester on steel stand — full station front-left view ECD Ovonics QA4-850-000 Connector Tester station — full rear-right view showing power cable and stand

    ECD Ovonics QA4-850-000 MC4 Solar Connector Reliability Tester 250V Uni-Solar

    Uni-Solar

    $600.00
    Was: $1,200.00
    ECD Ovonics QA4-850-000 MC4 Solar Connector Reliability Tester 250V Uni-Solar Benchtop vibration and continuity tester designed for MC4 solar connector qualification in photovoltaic manufacturing...
    48199
    SKU:
    48199
    Availability:
    This item requires freight shipping — please contact us for a shipping quote before purchasing.
    Weight:
    260.00 LBS
    Brand:
    ECD Ovonics
    Model:
    QA4-850-000
    MPN:
    QA4-850-000
    Type:
    MC4 Solar Connector Reliability Tester
    SKU:
    48199
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Includes Netter Vibration NEA-5050 vibrator, orange MC4 test pad, Carr-Lane hold-down clamp, and MC4 cable harness. Requires freight shipping.
    Connector Type:
    MC4 (Multi-Contact 4mm Solar Connector)
    Interface / PC Comm:
    9-Pin RS-232 Serial (DB-9), rear panel
    Power Requirements:
    250V AC, 10A fuse (Mains)
    Vibration Unit:
    Netter Vibration NEA-5050
    Vibrator Voltage:
    110-115V AC
    Vibrator Current:
    0.46A
    Vibrator Power:
    0.045 kW
    Vibrator Phase:
    Single Phase
    Vibrator Frequency:
    50/60 Hz
    Vibrator Speed:
    3000/3600 min-1
    Vibrator Force:
    440/640 N
    Vibrator Duty Cycle:
    100%
    Vibrator Protection Rating:
    IP65
    Vibrator Serial Number:
    100049630
    Test Pad Color:
    Orange
    Test Pad Dimensions:
    7" x 5.5"
    Tabletop Dimensions:
    36" x 24"
    Overall Dimensions:
    36.25" x 24" x 45" tall
    Front Panel Controls:
    START (green), STOP (red), Up/Down/Enter navigation buttons, LCD display
    Front Panel Indicators:
    TEST IN PROGRESS LED, Vibrator ON LED
    Clamp:
    Carr-Lane vertical hold-down toggle clamp
    Application:
    MC4 connector vibration/continuity reliability testing for solar panel production
    Compatible With:
    Uni-Solar solar panel production lines, MC4 photovoltaic connectors
    Country/Region of Manufacture:
    USA
    Form Factor:
    Benchtop / Free-standing workstation on steel stand
    Shipping Method:
    Freight shipping required
    Condition Notes:
    ECD Ovonics QA4-850-000 MC4 Solar Connector Tester sold as-is. Not powered or tested — no PC/software available for the rear 9-pin serial port. Appears physically complete with vibrator, test pad, and clamp. Freight shipping required.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $600.00
    Was: $1,200.00
  • Uni-Solar PVL-136 flexible solar panel carton of 30 on pallet, box open showing panels coiled with brown paper interleaving Uni-Solar PowerBond PVL-136 technical data sheet showing specifications, certifications, and product highlights

    Uni-Solar PVL-136 136W Flexible Solar Panel 30-Unit Carton Solder Point UL 1703

    Uni-Solar

    $3,200.00
    Was: $6,400.00
    Uni-Solar PVL-136 136W Flexible Solar Panel 30-Unit Carton Solder Point UL 1703 The Uni-Solar PVL-136 is a PowerBond flexible thin-film solar laminate rated at 136 watts peak power (STC). Unlike...
    44026
    SKU:
    44026
    Availability:
    Usually ships within 3-5 business days via freight; contact us for shipping quotes on this pallet-sized carton.
    Weight:
    625.00 LBS
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-136
    MPN:
    PVL-136
    Type:
    Flexible Thin-Film Solar Panel
    SKU:
    44026
    Seller Notes:
    Carton of 30 panels, solder-point termination, new old stock from Uni-Solar liquidation
    Country/Region of Manufacture:
    United States
    Power Output (Pmax):
    136 W (STC)
    Cell Technology:
    Triple-junction amorphous silicon (thin-film)
    Number of Panels:
    30
    Nominal Operating Voltage:
    24V
    Voltage at Pmax (Vmpp) STC:
    33.0 V
    Current at Pmax (Impp) STC:
    4.13 A
    Short-Circuit Current (Isc) STC:
    5.1 A
    Open-Circuit Voltage (Voc) STC:
    46.2 V
    Maximum Series Fuse Rating:
    10 A (UL), 8 A (IEC)
    System Voltage Rating:
    Up to 600 VDC (UL 1703); up to 1000 VDC (IEC)
    Certifications:
    UL 1703 Listed; TÜV Rheinland IEC 61646 & IEC 61730
    Panel Dimensions:
    5486 mm x 394 mm x 4 mm (216" x 15.5" x 0.2")
    Termination Type:
    Bottom-facing solder points
    Output Cable:
    4mm² (12 AWG), weatherproof DC quick-connect, 560mm (22")
    Bypass Diodes:
    Connected across every solar cell
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer with microbial inhibitor
    Roofing Compatibility:
    Membrane and metal roofing systems
    Wind Resistance:
    Category 3 / 130 MPH hurricane uplift resistant
    Installation Method:
    Peel-and-stick adhesive, no hardware penetrations
    Power Tolerance:
    +/- 5%
    Operating Temperature Range:
    10°C to 40°C (50°F to 100°F)
    Maximum Roof Temperature:
    85°C
    Form Factor:
    Flexible laminate / roll format
    Compatible With:
    Grid-tie systems up to 600 VDC (UL); membrane & metal roofs
    Datasheet Part Number:
    AA4-3697-05
    Condition Notes:
    Uni-Solar PVL-136 136W flexible solar panels, carton of 30. New and unused, original factory carton on pallet. Custom solder-point variant sourced directly from Uni-Solar at 2012 liquidation. No longer in production.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $3,200.00
    Was: $6,400.00
  • Uni-Solar PVL-128 carton of 30 flexible solar laminates coiled in large pallet shipping box, top panel showing purple amorphous cell surface Uni-Solar PVL-128 technical data sheet showing model name, key features, and performance characteristics including bypass diodes and UL 1703 listing

    Uni-Solar PVL-128 Flexible Solar Laminate 128W 24V Carton 30 Panels 3840W

    Uni-Solar

    $3,300.00
    Was: $6,600.00
    Uni-Solar PVL-128 Flexible Solar Laminate 128W 24V Carton 30 Panels 3840W This listing is for a full factory carton of 30 Uni-Solar PVL-128B flexible amorphous thin-film solar laminates, totaling...
    44032
    SKU:
    44032
    Availability:
    Usually ships within 1-2 business days via freight; pickup from nearest terminal available.
    Weight:
    560.00 LBS
    Spec Sheet:
    Unisolar PVL-128 Solar Panel Spec Sheet
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-128
    MPN:
    PVL-128B
    Type:
    Flexible Amorphous Thin-Film Solar Laminate
    SKU:
    44032
    Quantity in Carton:
    30 panels
    Total System Power:
    3840W (30 x 128W)
    Maximum Power (Pmax) per Panel:
    128 Wp
    Nominal Operating Voltage:
    24V
    Max Power Voltage (Vmpp):
    33.0V
    Max Power Current (Impp):
    3.88A
    Open Circuit Voltage (Voc):
    47.6V
    Short Circuit Current (Isc):
    4.8A
    Maximum Series Fuse Rating:
    8A
    NOCT Max Power (Pmpp):
    100W
    NOCT Vmp:
    30.8V
    NOCT Imp:
    3.24A
    NOCT Voc:
    43.5V
    NOCT Temperature:
    46°C
    Panel Dimensions:
    216" L x 15.5" W x 0.2" thick (5486 x 394 x 4mm)
    Cell Type:
    Triple-junction amorphous silicon, 356mm x 239mm
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer with microbial inhibitor
    Output Cables:
    4mm² (12 AWG), 560mm (22") bare 4" wires, bottom-facing
    Bypass Diodes:
    Connected across every solar cell
    Wind/Hurricane Rating:
    Category 3, 130 MPH uplift resistant
    Certifications:
    UL 1703 to 600VDC, IEC 61646 v1, IEC 61730, TUV pending
    Mounting Method:
    Self-adhesive laminate, no hardware required
    Application:
    Membrane and metal roofing systems
    Minimum Roof Slope:
    5/8:12 (3°)
    Maximum Roof Slope:
    21:12 (60°)
    Installation Temp Range:
    10°C to 40°C (50°F to 100°F)
    Max Operating Temp:
    85°C (185°F)
    Max System Voltage:
    600VDC (UL)
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Carton of 30 panels; MC4 cables and junction box included for DIY installs
    Condition:
    New
    Data Sheet Part Number:
    AA5-3851-02
    Condition Notes:
    Brand new carton of 30 Uni-Solar PVL-128 128W flexible solar laminates. Unused, factory condition. Includes MC4 cables and junction box. Bottom-facing 4" wire leads. Ships freight to nearest terminal.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $3,300.00
    Was: $6,600.00
  • Uni-Solar PVL-128 128W flexible amorphous solar panel shown unrolled on floor, displaying dark purple photovoltaic cells and white backing Uni-Solar PVL-128 official technical data sheet showing product specifications, features, and UL listing details

    Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel UL 1703 600VDC

    Uni-Solar

    $120.00
    Was: $250.00
    Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel UL 1703 600VDC The Uni-Solar PVL-128 is a 128-watt flexible amorphous thin-film solar laminate designed to bond directly to membrane and...
    44033
    SKU:
    44033
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    20.00 LBS
    Datasheet:
    Unisolar PVL-128 Datasheet
    Brand:
    Uni-Solar
    Model:
    PVL-128
    MPN:
    PVL-128
    Part Number:
    AA5-3851-02
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    SKU:
    44033
    Seller Notes:
    Includes 4-inch bottom-facing output wires (positive/negative). Junction box not included.
    Country/Region of Manufacture:
    United States
    Maximum Power (Pmax):
    128 W
    Nominal Operating Voltage:
    24 V
    Max Power Voltage (Vmpp):
    33.0 V
    Max Power Current (Impp):
    3.88 A
    Open Circuit Voltage (Voc):
    47.6 V
    Short Circuit Current (Isc):
    4.8 A
    Maximum Series Fuse Rating:
    8 A
    NOCT Power (Pmpp):
    100 W
    NOCT Voltage (Vmpp):
    30.8 V
    NOCT Current (Impp):
    3.24 A
    NOCT Open Circuit Voltage (Voc):
    43.5 V
    NOCT Short Circuit Current (Isc):
    3.9 A
    NOCT Temperature:
    46°C
    Panel Length:
    5486 mm (216") / 18 ft
    Panel Width:
    394 mm (15.5")
    Panel Depth:
    4 mm (0.2")
    Output Cable Length:
    560 mm (22")
    Output Cable Gauge:
    4 mm² (12 AWG)
    Cell Type:
    Triple-junction amorphous silicon
    Cell Dimensions:
    356 mm x 239 mm
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer w/ microbial inhibitor
    By-pass Diodes:
    Connected across every solar cell
    UL Listing:
    UL 1703 — systems up to 600 VDC
    Fire Rating:
    Class A Max. Slope 2:12, Class B Max. Slope 3:12
    IEC Certification:
    IEC 61646 v1 certified
    Installation Temperature Range:
    -10°C to 40°C (50°F to 100°F)
    Maximum Roof Temperature:
    85°C (185°F)
    Minimum Roof Slope:
    5:8:12 (3°)
    Maximum Roof Slope:
    21:12 (60°)
    Compatible Substrates:
    EPDM, TPO, PVDF-coated metal roofing
    Application:
    Membrane and metal roofing, grid-tie solar systems
    Condition:
    New
    Form Factor:
    Flexible Laminate / Roll
    Condition Notes:
    This Uni-Solar PVL-128 128W flexible amorphous solar panel is new and unused. Clean, intact laminate surface and backing. Includes 4-inch bottom-facing output wires (red/black). No junction box included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $120.00
    Was: $250.00
  • Uni-Solar PVL-68 flexible amorphous solar panel partially unrolled showing blue photovoltaic surface and MC3 output cable Uni-Solar PVL-68 flexible solar panel laid flat showing full blue laminate surface, MC3 cable, and product label

    Uni-Solar PVL-68 68W 12V Flexible Amorphous Solar Panel Peel & Stick MC3

    Uni-Solar

    $160.00
    Was: $325.00
    Uni-Solar PVL-68 68W 12V Flexible Amorphous Solar Panel Peel & Stick MC3 Flexible amorphous thin-film solar panel rated at 68W maximum power output. Features factory-installed peel-and-stick...
    44043
    SKU:
    44043
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    9.00 LBS
    Brand:
    Uni-Solar
    Model:
    PVL-68
    MPN:
    PVL-68
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    SKU:
    44043
    Seller Notes:
    Includes panel with factory-installed adhesive backing and MC3 output cable
    Country/Region of Manufacture:
    Mexico
    Form Factor:
    Flexible / Frameless Laminate
    Maximum Power (Pmax):
    68 W
    Nominal Operating Voltage:
    12 V
    Voltage at Pmax (Vmpp):
    16.5 V
    Current at Pmax (Impp):
    4.13 A
    Open-Circuit Voltage (Voc):
    23.1 V
    Short-Circuit Current (Isc):
    5.1 A
    Max System Voltage:
    1000 V (IEC) / 600 V (UL)
    Maximum Series Fuse:
    10 A (UL) / 8 A (IEC)
    Minimum Blocking Diode:
    10 A (UL) / 8 A (IEC)
    Module Efficiency:
    6.2%
    Cells Per Module:
    11
    Frame Material:
    Frameless
    Module Connector:
    MC3
    Field Wiring:
    Copper only, 12–10 AWG, insulated for 90°C min.
    Adhesive Backing:
    Factory-installed peel-and-stick bonding adhesive
    Panel Dimensions:
    112.1 x 15.5 x 0.2 inches
    Cell Technology:
    Amorphous Silicon (a-Si) Thin Film
    Certifications:
    UL Listed, CE, TÜV
    Condition:
    New – Unused
    Compatible With:
    12V battery systems, RV, marine, commercial rooftop
    Manufacturer:
    United Solar Ovonic (Uni-Solar), Auburn Hills, MI, USA
    Condition Notes:
    This Uni-Solar PVL-68 68W flexible amorphous solar panel is new and unused. Peel-and-stick adhesive backing is factory-installed and intact. MC3 cable included. Please view our photos and contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $160.00
    Was: $325.00
  • Uni-Solar PVL-136 flexible solar panel displayed leaning against carton of 30 panels coiled on pallet in large cardboard box Uni-Solar PowerBond PVL-136 technical data sheet showing specifications, UL 1703 listing, dimensions, and performance characteristics

    Uni-Solar PVL-136 Flexible Amorphous Solar Panel 136W 24V Lot of 30 4080W

    Uni-Solar

    $3,800.00
    Was: $7,600.00
    Uni-Solar PVL-136 Flexible Amorphous Solar Panel 136W 24V Lot of 30 4080W This listing is for a full carton of 30 Uni-Solar PVL-136 PowerBond flexible amorphous solar panels, totaling 4,080 watts...
    44651
    SKU:
    44651
    Availability:
    This is a large pallet shipment — please contact us for freight shipping rates before purchasing.
    Weight:
    570.00 LBS
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-136
    MPN:
    PVL-136(B)
    Type:
    Flexible Thin-Film Amorphous Solar Panel
    SKU:
    44651
    Quantity in Lot:
    30 panels
    Total Lot Wattage:
    4080W (30 x 136W)
    Rated Power (Pmax) Per Panel:
    136 Wp
    Voltage at Pmax (Vmp):
    33.0 V
    Current at Pmax (Imp):
    4.13 A
    Short-Circuit Current (Isc):
    5.1 A
    Open-Circuit Voltage (Voc):
    42.2 V
    Maximum Series Fuse Rating:
    10 A (UL), 8 A (IEC)
    Cell Type:
    Triple-junction amorphous silicon thin-film
    Number of Cells:
    22 cells (356mm x 239mm each) in series
    Encapsulation:
    Durable ETFE high light-transmissive polymer
    Adhesive:
    Ethylene propylene copolymer with microbial inhibitor
    Bypass Diodes:
    Yes — connected across every solar cell
    Output Cables:
    4mm² (12 AWG) weatherproof DC quick-connect, 560mm (22") length
    Wire Configuration:
    Bottom-facing 4" wires (custom configuration)
    Panel Dimensions:
    5486mm L x 394mm W x 4mm D (216" x 15.5" x 0.2")
    Terminal Housing Depth:
    16mm (0.6") including potted terminal housing
    System Voltage Rating:
    Up to 600 VDC (UL); up to 1000 VDC (IEC 61646/61730)
    Certification:
    UL 1703 Listed; TÜV Rheinland IEC 61646 & IEC 61730
    UL Fire Rating:
    Class A Slope 2/12, Class B Max Slope 3/12, Class C Unlimited
    Hurricane / Wind Rating:
    Category 3 — 130 MPH uplift resistant
    Installation Method:
    Peel-and-stick adhesive — no hardware or penetrations
    Compatible Roofing:
    Membrane and metal roofing systems
    Operating Temperature Range:
    10°C to 40°C (50°F to 100°F)
    Max Roof Temperature:
    85°C (185°F)
    Minimum Slope:
    3° (1:21:12)
    Maximum Slope:
    60° (21:12)
    Power Output Warranty:
    92% at 10 yrs, 84% at 20 yrs, 80% at 25 yrs (min power)
    Product Warranty:
    5-Year Limited Product Warranty (original)
    Country/Region of Manufacture:
    United States
    Form Factor:
    Flexible Roll-Format Laminate
    Seller Notes:
    Carton of 30 panels on pallet; custom 4" bottom-facing wire configuration
    Condition Notes:
    Uni-Solar PVL-136 flexible solar panels — new old stock from 2012 Unisolar facility liquidation. Never installed or used. Custom 4" bottom-facing wire configuration. Panels remain in original carton on pallet. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $3,800.00
    Was: $7,600.00
  • Uni-Solar MX1-711-000-5 corner trim machine — rear/side view showing green painted steel panel and leveling feet Uni-Solar MX1-711-000-5 corner trim machine — front view with polycarbonate safety guards open, showing pneumatic cylinders and orange-handled drawer

    Uni-Solar MX1-711-000-5 Corner Trim Machine 14.5" Plastic Sheet Solar Panel

    Uni-Solar

    $600.00
    Was: $1,200.00
    Uni-Solar MX1-711-000-5 Corner Trim Machine 14.5" Plastic Sheet Solar Panel The Uni-Solar MX1-711-000-5 is a purpose-built pneumatic corner-cutting machine designed to trim the corners of 14.5"-wide...
    47241
    SKU:
    47241
    Availability:
    Usually ships within 3-5 business days due to size — please contact us to arrange freight.
    Weight:
    230.00 LBS
    Brand:
    Uni-Solar
    Model:
    MX1-711-000-5
    MPN:
    MX1-711-000-5
    Secondary Model:
    MX1-711-000
    SKU:
    47241
    Type:
    Corner Trim Machine / Corner Cutting Machine
    Manufacturer:
    MISCO Industries (miscoind.com)
    Application:
    Solar panel component plastic sheet corner trimming
    Sheet Width Capacity:
    14.5 inches
    Blade Type:
    1" wide x 0.25" thick slanted blades (2x)
    Linear Motion Guides:
    THK HSR20 (x2)
    Power Requirements:
    110 VAC, 60Hz
    Power Supply:
    Rhino PSP24-060S, 60W, 110 VAC to 24VDC
    Optical Sensors:
    Keyence FS-N11CP fiber optic sensors (x2)
    Door Sensor:
    Telemecanique XCS-PA593 with Danner E5-FA-9AA
    Time Delay Relays:
    Fuji Electric MS4SA (x3)
    Pneumatic Shut-Off Valve:
    SMC VHS40-04
    Pneumatic Filter/Regulator:
    SMC AW40-04E
    Pneumatic Solenoid Valves:
    SMC VQC4101-5 (x2)
    Pneumatic Cylinders:
    SMC CG1UN50-25, 145 PSI max (x2)
    Air Supply Required:
    Yes — external compressed air required
    Controls:
    Power On pushbutton, Emergency Stop (red mushroom)
    Enclosure:
    Aluminum extrusion frame, polycarbonate safety guards
    Lower Drawer:
    Green painted steel scrap collection drawer
    Country/Region of Manufacture:
    USA
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Internal 24VDC power supply lights up when plugged in. Requires external air supply to operate cutting heads.
    Condition Notes:
    Uni-Solar MX1-711-000-5 Corner Trim Machine pulled from solar panel production. Internal 24VDC power supply lights up when plugged in. Cutting heads require external compressed air to operate. Good used condition with normal production wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $600.00
    Was: $1,200.00
  • Uni-Solar PVL-136 136W flexible solar panel partially unrolled from cardboard core showing full panel length on warehouse floor Close-up of Uni-Solar PVL-136 amorphous solar cell surface showing three blue triple-junction cell sections with interconnect lines

    Uni-Solar PVL-136 136W 24V Flexible Amorphous Solar Panel Peel & Stick RV Boat

    Uni-Solar

    $145.00
    Was: $300.00
    Uni-Solar PVL-136 136W 24V Flexible Amorphous Solar Panel Peel & Stick RV Boat The Uni-Solar PVL-136 is a 136-watt, 24-volt flexible thin-film solar panel manufactured by United Solar Ovonic...
    44027
    SKU:
    44027
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    20.00 LBS
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-136
    MPN:
    PVL-136
    Type:
    Flexible Amorphous Thin-Film Solar Panel
    SKU:
    44027
    Power Output:
    136W
    Voltage (Vmp):
    24V
    Cell Technology:
    Triple Junction Amorphous Silicon
    Mounting Style:
    Peel-and-Stick Adhesive Backing
    Panel Dimensions:
    18 ft long x 15.5 in wide
    UL Listing:
    UL 1703 Listed
    Max System Voltage:
    600 VDC
    Wind Resistance:
    Category 3 Hurricane Uplift (130 MPH)
    Bypass Diodes:
    Yes — per individual cell
    Grid Tie Compatible:
    Yes
    Compatible Applications:
    RV, Boat, Membrane Roofing, Metal Roofing
    Installation Method:
    No hardware required — direct adhesive bond
    Includes:
    MC4 Junction Box set (upon request)
    Condition:
    New
    Country/Region of Manufacture:
    United States
    Seller Notes:
    New panel. MC4 J-box set included with every panel upon request for DIY install.
    Condition Notes:
    Uni-Solar PVL-136 136W flexible solar panel — new and unused, stored on original cardboard core. No wear or damage. MC4 J-box set included upon request for DIY install.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $145.00
    Was: $300.00
  • Uni-Solar PVL-144 144W amorphous flexible solar panel partially unrolled showing full laminate length and white backing — floor view Uni-Solar PVL-144 label closeup showing United Solar Ovonic brand name, barcode, and JUN2011 manufacture date

    Uni-Solar PVL-144 144W Amorphous Flexible PowerBond Solar Panel 46.2Voc MC4

    Uni-Solar

    $144.00
    Was: $300.00
    Uni-Solar PVL-144 144W Amorphous Flexible PowerBond Solar Panel 46.2Voc MC4 Flexible amorphous silicon thin-film solar panel with adhesive PowerBond backing for direct application to flat or...
    44139
    SKU:
    44139
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    17.00 LBS
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    PVL-144
    MPN:
    PVL-144B
    SKU:
    44139
    Condition:
    New – Old Stock
    Seller Notes:
    Includes DIY MC4 junction box and male/female MC4 connectors
    Form Factor:
    Flexible Laminate, Frameless, Rollable
    Country of Manufacture:
    United States
    Solar Cell Type:
    Amorphous Silicon (a-Si) Thin Film
    Maximum Power (Pmax):
    144 Watts
    Nominal Operating Voltage:
    24 Volts
    Max Power Voltage (Vmpp):
    33 Volts
    Max Power Current (Impp):
    4.4 Amps
    Open Circuit Voltage (Voc):
    46.2 Volts
    Short Circuit Current (Isc):
    5.3 Amps
    Max System Voltage:
    600 Volts
    Module Efficiency:
    6.67%
    Panel Dimensions:
    18 ft x 15-3/8 in (18 Feet Long x 15.375 Inches Wide)
    Frame Material:
    Frameless
    Module Connector:
    Solder Point on Bottom of Panel
    Mounting Type:
    PowerBond Adhesive Peel-and-Stick
    UL Rating:
    No UL rating sticker
    Manufacture Date:
    June 2011
    Compatible With:
    Low-slope and flat roofing, RV, marine, off-grid
    Type:
    BIPV Building-Integrated Photovoltaic
    Certifications:
    None listed (no UL sticker on this unit)
    Condition Notes:
    This Uni-Solar PVL-144 144W amorphous flexible solar panel is new old stock, manufactured June 2011, sourced directly from the Uni-Solar manufacturing and distribution facility liquidation. The panel has not been installed or deployed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $144.00
    Was: $300.00
  • Box of 100 Uni-Solar L-Strip amorphous solar cells shown fanned out in front of original cardboard shipping box Close-up diagram showing negative back-side connection and positive protruding tab tips on Uni-Solar L-Strip solar cell

    Uni-Solar L-Strip Amorphous Solar Cell 7.5W 1.6V ePVL DIY Lot of 100

    Uni-Solar

    $280.00
    Was: $400.00
    Uni-Solar L-Strip Amorphous Solar Cell 7.5W 1.6V ePVL DIY Lot of 100 Box of 100 amorphous silicon solar cells manufactured by United Solar Ovonic. Each cell features solder tabs and a stainless steel...
    44046
    SKU:
    44046
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    34.00 LBS
    Brand:
    Uni-Solar (United Solar Ovonic)
    Model:
    L-Strip Amorphous Solar Cell
    MPN:
    DC-110827-048
    SKU:
    44046
    Condition:
    New – New Old Stock (NOS)
    Seller Notes:
    Box of 100 solar cells with solder tabs. May have minor cosmetic blemishes.
    Cell Technology:
    Amorphous Silicon (a-Si) on Stainless Steel Substrate
    Maximum Power (Pmax):
    7.573W avg (4.872W low / 7.757W high)
    Max Power Voltage (Vmpp):
    1.60 V
    Max Power Current (Impp):
    3.875 A
    Open Circuit Voltage (Voc):
    2.05 V
    Short Circuit Current (Isc):
    5.397 A avg (4.953 low / 5.446 high)
    Cell Efficiency:
    6–7%
    Cell Size:
    14" L x 10" W (35.56 cm x 25.4 cm)
    Quantity per Box:
    100 cells
    Positive Connection:
    Two protruding tips on cell edge
    Negative Connection:
    Entire back-side; solder tabs to back-edge strips
    Compatible With:
    Uni-Solar ePVL / PVL series solar panel assembly
    Application:
    DIY solar panels, battery charging, off-grid power projects
    Country of Manufacture:
    USA (Auburn Hills, Michigan)
    Provenance:
    2012 United Solar Ovonic liquidation, main Michigan plant
    Condition Notes:
    These Uni-Solar L-Strip amorphous solar cells are new old stock (NOS) — manufactured by United Solar Ovonic and never assembled into panels. Individual cells may have minor cosmetic blemishes that differ from those shown in the photos, which depict
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $280.00
    Was: $400.00