null
Uni-Solar

Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel Peel Stick Solder

(No reviews yet) Write a Review
SKU:
51942
MPN:
PVL-128
Condition:
New
Availability:
Usually ships within 1-2 business days.
Weight:
20.00 LBS
Shipping:
Calculated at Checkout
  • Uni-Solar PVL-128 flexible amorphous solar panel rolled up showing peel-and-stick adhesive backing and thin laminate profile
  • Uni-Solar PVL-128 Solar Laminate PVL-Series technical data sheet showing model number, features, and construction characteristics
  • Uni-Solar PVL-128 data sheet showing full electrical specifications including STC and NOCT curves, temperature coefficients, and dimensional drawing
  • Close-up of Uni-Solar PVL-128 bottom solder point connections — two exposed solder contacts on white backing
  • Uni-Solar PVL-128 serial number label showing United Solar Ovonic branding and barcode on panel rear
$125.00
Was: $250.00
Current Stock: 30

Sold Out

Description

Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel Peel Stick Solder

Flexible thin-film amorphous silicon solar panel rated at 128W nominal output. Features peel-and-stick adhesive installation with solder-point electrical connections on the underside.

Specifications & What's Included

  • Maximum Power: 128W at 24V nominal
  • Max Power Point: 33.0V / 3.88A
  • Open Circuit Voltage: 47.6V; Short Circuit Current: 4.8A
  • Dimensions: 216 inches long × 15.5 inches wide × 0.2 inches thick
  • Cell Type: Triple-junction amorphous silicon with bypass diodes
  • Installation: Peel-and-stick ETFE encapsulation; no hardware required
  • Wind Rating: Category 3 Hurricane Uplift Resistant (130 MPH)
  • Max System Voltage: 600 VDC; Certifications: UL 1703, IEC 61646, IEC 61730

Applications

Amorphous thin-film panels were used in grid-tie and off-grid solar installations through the 2010s. This roll-form design suits membrane and metal roofing integration without roof penetrations. Compatible with 600 VDC systems. Used in RV, marine, telecom backup power, and remote building applications where flexible, low-profile mounting was required.

Condition: New
This Uni-Solar PVL-128 128W Flexible Amorphous Solar Panel is new and unused. These panels came directly from the Uni-Solar (United Solar Ovonic) manufacturing and distribution facility when it was liquidated in 2012, and have been stored since. They were originally packed in factory cartons of 30 and are being sold here as individual panels. The panels show no signs of use or wear. This specific variant features bottom-facing solder points rather than the standard quick-connect terminals, as they were made for a specific customer order. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
View AllClose

Warranty Information

We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose

Additional Information

Spec Sheet:
Unisolar PVL-128 Solar Panel Spec Sheet
Brand:
Uni-Solar
Model:
PVL-128
MPN:
PVL-128
Type:
Flexible Amorphous Thin-Film Solar Panel
Part Number:
AA5-3851-02
SKU:
51942
Manufacturer:
United Solar Ovonic
Condition:
New – Unused, New Old Stock from Factory Liquidation
Seller Notes:
New old stock; sold as single panels from factory cartons of 30
Country/Region of Manufacture:
United States
Maximum Power (Pmax):
128 Watts
Nominal Operating Voltage:
24 V
Max Power Voltage (Vmpp):
33.0 V
Max Power Current (Impp):
3.88 A
Open Circuit Voltage (Voc):
47.6 V
Short Circuit Current (Isc):
4.8 A
Maximum Series Fuse Rating:
8 A
NOCT Power Output:
100 W
NOCT Vmpp:
30.8 V
NOCT Impp:
3.24 A
NOCT Voc:
43.5 V
NOCT Isc:
3.9 A
NOCT Temperature:
46°C
Solar Cell Type:
Amorphous Silicon (Triple-Junction)
Cell Size:
356 mm x 239 mm (14" x 9.4")
Panel Length:
216 in (5486 mm / 18 ft)
Panel Width:
15.5 in (394 mm)
Panel Depth/Thickness:
0.2 in (4 mm)
Electrical Connector Type:
Solder Points (bottom-facing, no quick-connect terminals)
Encapsulation:
Durable ETFE high light-transmissive polymer
Adhesive:
Ethylene propylene copolymer adhesive-sealant with microbial inhibitor
Bypass Diodes:
Connected across every solar cell
Installation Method:
Peel-and-stick adhesive; no penetrations or hardware required
Suitable Roof Types:
Membrane (EPDM/TPO) and metal (Galvalume/Zincalume/PVDF)
Wind Resistance:
Category 3 Hurricane Uplift Resistant (130 MPH)
Max System Voltage:
600 VDC (UL 1703 Listed)
Operating Temperature Range:
-10°C to +40°C (50°F to 100°F)
Maximum Roof Temperature:
85°C (185°F)
Minimum Roof Slope:
5:8 (3°)
Maximum Roof Slope:
21:12 (60°)
Certifications:
UL 1703, IEC 61646 v1, IEC 61646 v2 (pending), IEC 61730
UL Fire Rating:
Class A (Slope 2/12), Class B (Slope 3/12), Class C (Unlimited Slope)
Form Factor:
Flexible Laminate Roll
Compatible With:
Grid-tie and off-grid systems up to 600 VDC
Power Output Tolerance:
+5% / -5%
Condition Notes:
Uni-Solar PVL-128 128W flexible solar panel — new and unused, new old stock from 2012 factory liquidation. Bottom solder-point variant. Stored in factory cartons; no signs of use or wear.
View AllClose

Related Products

Related Products

Uni-Solar PVL-128 flexible solar panels coiled in factory carton on pallet — purple amorphous cell surface visible Uni-Solar PVL-128 official technical data sheet showing model name, features, and UL listing details
Add to Cart
Quick view

Uni-Solar PVL-128 128W 24V Flexible Peel-Stick Solar Panel Carton 30 3840W

Uni-Solar

$2,800.00
Was: $5,600.00
Uni-Solar PVL-128 128W 24V Flexible Peel-Stick Solar Panel Carton 30 3840WThis listing is for a factory carton of 30 Uni-Solar PVL-128 flexible thin-film amorphous silicon solar panels, totaling...
52267
SKU:
52267
Availability:
Usually ships within 1-2 business days via freight.
Weight:
560.00 LBS
Spec Sheet:
Unisolar PVL-128 Solar Panel Spec Sheet
Brand:
Uni-Solar (United Solar Ovonic)
Model:
PVL-128
MPN:
PVL-128
Type:
Flexible Thin-Film Amorphous Silicon Solar Panel
SKU:
52267
Quantity in Carton:
30 panels per carton
Max Power Current (Impp):
3.88 A
Open Circuit Voltage (Voc):
47.6 V
Short Circuit Current (Isc):
4.8 A
Maximum Series Fuse Rating:
8 A
Panel Dimensions:
216 in L x 15.5 in W x 0.2 in thick (18 ft x 1.29 ft)
Cell Technology:
Triple-junction amorphous silicon (14 x 9.4 in cells)
Encapsulation:
Durable ETFE high light-transmissive polymer
Adhesive:
Ethylene propylene copolymer adhesive-sealant
By-pass Diodes:
Yes — connected across every solar cell
Electrical Connectors:
Bottom-facing solder points (no cables)
UL Listing:
UL 1703 Listed to 600 VDC
IEC Certification:
IEC 61646 v1 certified
Wind Resistance:
Category 3 hurricane uplift resistant (130 MPH)
Installation Method:
Peel-and-stick adhesive — no hardware required
Compatible Substrates:
Membrane roofing, metal roofing (PVDF/Galvalume/Zincalume)
Minimum Slope:
5/12 (3 degrees)
Maximum Slope:
21/12 (60 degrees)
Operating Temperature Range:
-10°C to +40°C (50°F to 100°F)
Max Roof Temperature:
85°C (185°F)
Production Pmax Tolerance:
+/- 5%
Seller Notes:
Carton of 30 new panels with solder points; no cables included
Country/Region of Manufacture:
United States
Form Factor:
Flexible roll laminate — peel-and-stick
Data Sheet Part Number:
#AA5-3851-02
Condition Notes:
Uni-Solar PVL-128 128W flexible solar panels — carton of 30, new/unused, direct from 2012 Unisolar facility liquidation. Never installed. Original factory carton, solder point connectors, no cables. Panels appear clean and undamaged.
Uni-Solar PVL-128 128W flexible amorphous solar panel shown unrolled on floor, displaying dark purple photovoltaic cells and white backing Uni-Solar PVL-128 official technical data sheet showing product specifications, features, and UL listing details
Add to Cart
Quick view

Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel UL 1703 600VDC

Uni-Solar

$120.00
Was: $250.00
Uni-Solar PVL-128 128W 24V Flexible Amorphous Solar Panel UL 1703 600VDC The Uni-Solar PVL-128 is a 128-watt flexible amorphous thin-film solar laminate designed to bond directly to membrane and...
44033
SKU:
44033
Availability:
Usually ships within 1-2 business days.
Weight:
20.00 LBS
Datasheet:
Unisolar PVL-128 Datasheet
Brand:
Uni-Solar
Model:
PVL-128
MPN:
PVL-128
Part Number:
AA5-3851-02
Type:
Flexible Amorphous Thin-Film Solar Panel
SKU:
44033
Seller Notes:
Includes 4-inch bottom-facing output wires (positive/negative). Junction box not included.
Country/Region of Manufacture:
United States
Maximum Power (Pmax):
128 W
Nominal Operating Voltage:
24 V
Max Power Voltage (Vmpp):
33.0 V
Max Power Current (Impp):
3.88 A
Open Circuit Voltage (Voc):
47.6 V
Short Circuit Current (Isc):
4.8 A
Maximum Series Fuse Rating:
8 A
NOCT Power (Pmpp):
100 W
NOCT Voltage (Vmpp):
30.8 V
NOCT Current (Impp):
3.24 A
NOCT Open Circuit Voltage (Voc):
43.5 V
NOCT Short Circuit Current (Isc):
3.9 A
NOCT Temperature:
46°C
Panel Length:
5486 mm (216") / 18 ft
Panel Width:
394 mm (15.5")
Panel Depth:
4 mm (0.2")
Output Cable Length:
560 mm (22")
Output Cable Gauge:
4 mm² (12 AWG)
Cell Type:
Triple-junction amorphous silicon
Cell Dimensions:
356 mm x 239 mm
Encapsulation:
Durable ETFE high light-transmissive polymer
Adhesive:
Ethylene propylene copolymer w/ microbial inhibitor
By-pass Diodes:
Connected across every solar cell
UL Listing:
UL 1703 — systems up to 600 VDC
Fire Rating:
Class A Max. Slope 2:12, Class B Max. Slope 3:12
IEC Certification:
IEC 61646 v1 certified
Installation Temperature Range:
-10°C to 40°C (50°F to 100°F)
Maximum Roof Temperature:
85°C (185°F)
Minimum Roof Slope:
5:8:12 (3°)
Maximum Roof Slope:
21:12 (60°)
Compatible Substrates:
EPDM, TPO, PVDF-coated metal roofing
Application:
Membrane and metal roofing, grid-tie solar systems
Condition:
New
Form Factor:
Flexible Laminate / Roll
Condition Notes:
This Uni-Solar PVL-128 128W flexible amorphous solar panel is new and unused. Clean, intact laminate surface and backing. Includes 4-inch bottom-facing output wires (red/black). No junction box included.
Uni-Solar PVL-128 Carton 128W Flexible Amorphous Solar Panels USED Qty 30 Uni-Solar PVL-128 Carton 128W Flexible Amorphous Solar Panels USED Qty 30
Add to Cart
Quick view

Uni-Solar PVL-128 128W Flexible Amorphous Solar Panels 24V Metal Roofing Qty 30

Uni-Solar

$2,000.00
Was: $4,000.00
Uni-Solar PVL-128 128W Flexible Amorphous Solar Panels 24V Metal Roofing Qty 30This is a carton of 30 Uni-Solar PVL-128 128-watt flexible amorphous silicon solar panels. The PVL-128 is a...
53179
SKU:
53179
Availability:
Usually ships within 1-2 business days.
Weight:
520.00 LBS
Brand:
Uni-Solar
Model:
PVL-128
MPN:
PVL-128
Type:
Flexible Amorphous Silicon Thin Film Solar Panel
SKU:
53179
Quantity in Lot:
30 Panels
Maximum Power (Pmax):
128 W
Nominal Operating Voltage:
24 V
Maximum Power Voltage (Vmpp):
33 V
Maximum Power Current (Impp):
3.88 A
Open Circuit Voltage (Voc):
47.6 V
Short Circuit Current (Isc):
4.8 A
Panel Technology:
Amorphous Silicon (a-Si)
Flexibility:
Flexible
Mounting Type:
Adhesive Peel-and-Stick — No Penetrations Required
Panel Length:
18 ft (216 in)
Panel Width:
1.29 ft (15.5 in)
Panel Thickness:
0.2 in
Compatible Roofing Types:
Metal, TPO, EPDM, Membrane
Connector Type:
Uni-Solar Proprietary
Bypass Diodes:
Integrated — max 4.5% power loss when shaded
Country/Region of Manufacture:
United States
Condition:
Used – Pulled from Working Environment
Seller Notes:
Carton of 30 panels; connectors included on panel ends
Condition Notes:
Carton of 30 Uni-Solar PVL-128 128W flexible amorphous solar panels. Inspected and in good condition. Pulled from a working environment. Panel roll intact; connectors present. Carton shows external wear/moisture staining — cosmetic only.
Uni-Solar PVL-128 128W flexible solar laminate roll inside open carton on pallet, top-down angle showing layered dark laminate material Uni-Solar PVL-128 128W flexible solar laminate roll inside open carton on pallet, top-down angle showing layered dark laminate material
Add to Cart
Quick view

Uni-Solar PVL-128 128W Flexible Amorphous Solar Panel Laminate 24V Qty 20

Uni-Solar

$2,100.00
Was: $4,200.00
Uni-Solar PVL-128 128W Flexible Amorphous Solar Panel Laminate 24V Qty 20Lot of 20 used flexible amorphous silicon solar panel laminates rated at 128W maximum power. These adhesive-backed panels...
53178
SKU:
53178
Availability:
Usually ships within 1-2 business days.
Weight:
420.00 LBS
Brand:
Uni-Solar
Model:
PVL-128
MPN:
PVL-128
Type:
Flexible Amorphous Solar Panel Laminate
SKU:
53178
Quantity:
20 panels per lot
Maximum Power (Pmax):
128 Watts (STC)
Nominal Operating Voltage:
24V
Maximum Power Voltage (Vmpp):
33.0 V
Maximum Power Current (Impp):
3.88 A
Open Circuit Voltage (Voc):
47.6 V
Short Circuit Current (Isc):
4.8 A
Max Series Fuse Rating:
8 A
NOCT Power Output:
100 W
NOCT Vmp:
30.8 V
NOCT Imp:
3.24 A
NOCT Voc:
43.5 V
NOCT Temperature:
46°C
Length:
5486 mm (216 in / 18 ft)
Width:
394 mm (15.5 in)
Depth:
4 mm (0.2 in)
Cell Type:
Triple-junction amorphous silicon, 356mm x 239mm
Encapsulation:
Durable ETFE high light-transmissive polymer
Adhesive:
Ethylene propylene copolymer adhesive-sealant
Output Cables:
4mm² (12 AWG), 560mm (22 in), quick-connect
Bypass Diodes:
Connected across every solar cell
Max System Voltage:
600 VDC (UL)
Certifications:
UL 1703, IEC 61646 v1, IEC 61730 TUV pending
Installation Method:
Adhesive-backed laminate, no roof penetrations
Compatible Substrates:
EPDM, TPO, PVDF coated metal roofing panels
Min Roof Slope:
5:12 (3°)
Max Roof Slope:
21:12 (60°)
Installation Temperature Range:
10°C to 40°C (50°F to 100°F)
Max Operating Temperature:
85°C (185°F)
Country/Region of Manufacture:
United States
Condition:
Used – Pulled from Working Environment
Seller Notes:
Lot of 20 panels. Includes output cables with quick-connect terminals on each panel.
Condition Notes:
Lot of 20 Uni-Solar PVL-128 128W flexible solar laminates inspected and in good used condition. Pulled from a working installation. Photos show surface scuffing and some junction box adhesive wear on visible panels. Output cables present.
Uni-Solar PVL-136 136W flexible solar panel partially unrolled from cardboard core showing full panel length on warehouse floor Close-up of Uni-Solar PVL-136 amorphous solar cell surface showing three blue triple-junction cell sections with interconnect lines
Add to Cart
Quick view

Uni-Solar PVL-136 136W 24V Flexible Amorphous Solar Panel Peel & Stick RV Boat

Uni-Solar

$145.00
Was: $300.00
Uni-Solar PVL-136 136W 24V Flexible Amorphous Solar Panel Peel & Stick RV Boat The Uni-Solar PVL-136 is a 136-watt, 24-volt flexible thin-film solar panel manufactured by United Solar Ovonic...
44027
SKU:
44027
Availability:
Usually ships within 1–2 business days.
Weight:
20.00 LBS
Brand:
Uni-Solar (United Solar Ovonic)
Model:
PVL-136
MPN:
PVL-136
Type:
Flexible Amorphous Thin-Film Solar Panel
SKU:
44027
Power Output:
136W
Voltage (Vmp):
24V
Cell Technology:
Triple Junction Amorphous Silicon
Mounting Style:
Peel-and-Stick Adhesive Backing
Panel Dimensions:
18 ft long x 15.5 in wide
UL Listing:
UL 1703 Listed
Max System Voltage:
600 VDC
Wind Resistance:
Category 3 Hurricane Uplift (130 MPH)
Bypass Diodes:
Yes — per individual cell
Grid Tie Compatible:
Yes
Compatible Applications:
RV, Boat, Membrane Roofing, Metal Roofing
Installation Method:
No hardware required — direct adhesive bond
Includes:
MC4 Junction Box set (upon request)
Condition:
New
Country/Region of Manufacture:
United States
Seller Notes:
New panel. MC4 J-box set included with every panel upon request for DIY install.
Condition Notes:
Uni-Solar PVL-136 136W flexible solar panel — new and unused, stored on original cardboard core. No wear or damage. MC4 J-box set included upon request for DIY install.