Electronic Components and Parts
-
ADC 394876-4 Band Pass Filter FR4QX22YY 4.25 kHz 5915-496-5545 10K Ohm
ADC
$25.00Was: $50.00ADC 394876-4 Band Pass Filter FR4QX22YY 4.25 kHz 5915-496-5545 10K OhmADC band pass filter module designed to isolate and pass signals at 4.25 kHz center frequency while attenuating out-of-band noise...47956- SKU:
- 47956
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- ADC
- Model:
- 394876-4
- MPN:
- 394876-4
- Secondary Model:
- FR4QX22YY
- Type:
- Band Pass Filter
- NSN:
- 5915-496-5545
- Center Frequency:
- 4.25 kHz
- Input Impedance:
- 10K Ohm
- Output Impedance:
- 10K Ohm
- Terminals:
- 3-terminal: 1-IN, 2-COM, 3-OUT
- Connector Type:
- Screw terminal / solder lug
- Date Code:
- 73-15
- Lot / Batch Code:
- D11158
- Country/Region of Manufacture:
- United States
- Form Factor:
- Enclosed Module
- SKU:
- 47956
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- ADC 394876-4 Band Pass Filter FR4QX22YY inspected and in good used condition. Housing shows light surface oxidation typical of age. Label legible; all three terminals intact. No structural damage noted.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Control Concepts Islatrol IC+107 Active Tracking Filter 120VAC 7.5A Normal Mode
Control Concepts
$65.00Was: $125.00Control Concepts Islatrol IC+107 Active Tracking Filter 120VAC 7.5A Normal ModeThe Control Concepts Islatrol IC+107 is an active tracking power line filter designed to suppress both normal-mode and...47619- SKU:
- 47619
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Control Concepts
- Model:
- IC+107
- MPN:
- IC+107
- Type:
- Active Tracking Line Filter / Power Conditioner
- SKU:
- 47619
- Input Voltage:
- 120 VAC
- Frequency:
- 50/60 Hz
- Current Rating:
- 7.5 A
- Filter Mode:
- Normal Mode and Common Mode
- TVSS Rating:
- 330 Vpk L-N, L-G, N-G
- Fault Current Rating:
- 5000 RMS Symmetrical Amperes
- Fuse Requirement:
- 30 Ampere Maximum Class J or K
- Connector Type:
- Screw terminal block (LINE side and LOAD side)
- Mounting:
- Panel / DIN mount with flanged base
- Certifications:
- UL Listed, CSA, CE
- Country/Region of Manufacture:
- United States
- Manufacturer Location:
- Binghamton, NY
- Lot ID:
- 40 96 5
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Control Concepts Islatrol IC+107 Active Tracking Filter in good used condition. Enclosure intact, label legible, terminals present. Interior components appear undamaged. Light surface wear typical. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
Togi PCN-1H40 40-Pin Terminal Block IDC Connector PLC I/O Wiring Module
Togi
$18.00Was: $40.00Togi PCN-1H40 40-Pin Terminal Block IDC Connector PLC I/O Wiring ModuleThe Togi PCN-1H40 is a 40-pin IDC terminal block module designed to break out a ribbon cable or IDC connector into individually...47352- SKU:
- 47352
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Togi
- Model:
- PCN-1H40
- MPN:
- PCN-1H40
- SKU:
- 47352
- Type:
- 40-Pin IDC Terminal Block Module
- Number of Pins:
- 40
- Connector Type:
- IDC (Insulation Displacement Connector)
- Terminal Type:
- Screw Terminal
- Form Factor:
- DIN Rail / Panel Mount
- Application:
- PLC I/O Wiring, Industrial Automation
- Locking Mechanism:
- Orange locking clips (x4)
- Country/Region of Manufacture:
- Japan
- Seller Notes:
- Unit only; no cables included. Orange locking clips present.
- Condition Notes:
- Togi PCN-1H40 40-Pin Terminal Block pulled from a working environment and inspected. All orange locking clips present. Screw terminals and IDC connector appear clean. Light surface wear from normal use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
IDEC KGNW Control Box Single Green Pushbutton Station w/ Pre-Wired Cable
IDEC
$25.00Was: $50.00IDEC KGNW Control Box Single Green Pushbutton Station w/ Pre-Wired CableSingle-position pushbutton control station manufactured by IDEC. Features one illuminated green pushbutton operator with...46812- SKU:
- 46812
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- IDEC
- Model:
- KGNW
- MPN:
- KGNW
- Type:
- Pushbutton Control Station / Control Box
- SKU:
- 46812
- Manufacturer:
- IDEC Izumi Corp.
- Country/Region of Manufacture:
- Japan
- Number of Positions:
- 1
- Operator Type:
- Single Green Illuminated Pushbutton
- Enclosure Type:
- Surface-Mount Control Box
- Cable:
- Pre-wired multi-conductor cable included
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes pre-wired multi-conductor cable; no additional accessories.
- Form Factor:
- Handheld / Wall-Mount Control Station
- Condition Notes:
- IDEC KGNW Control Box inspected and in good used condition. Enclosure shows moderate surface wear and paint scuffing typical of industrial use. Green pushbutton intact; second port blanked. Pre-wired cable with bare leads included.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Simco HA-4A Static Eliminator Power Unit 100V 4KV 2mA Fiber Optic For Parts
Simco
$75.00Was: $150.00Simco HA-4A Static Eliminator Power Unit 100V 4KV 2mA Fiber Optic For PartsThe Simco HA-4A is a compact, benchtop high-voltage static eliminator power unit manufactured by Simco Japan (シムコジャパン株式会社)...46754- SKU:
- 46754
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 13.00 LBS
- Brand:
- Simco
- Model:
- HA-4A
- MPN:
- HA-4A
- Type:
- Static Eliminator Power Unit
- SKU:
- 46754
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Includes attached armored fiber-optic cable and output probe
- Country/Region of Manufacture:
- Japan
- Input Voltage:
- 100V AC
- Input Current:
- 0.2 A
- Frequency:
- 50/60 Hz
- Output Voltage (Rated):
- 4 KV
- Output Current (Max Short Circuit):
- 2 mA
- Fuse Rating:
- 0.2 A
- Output Type:
- High Voltage via Fiber Optic Cable
- Form Factor:
- Benchtop / Compact Box
- Manufacturer:
- Simco Japan (シムコジャパン株式会社)
- Application:
- Static elimination / ionization
- Power Requirements:
- 100V AC, 50/60Hz, 0.2A
- High Voltage Warning:
- 4.0 kV — high voltage caution label present
- Condition Notes:
- Simco HA-4A Static Eliminator powers on, switch illuminates, but no output detected from fiber-optic cable. Unable to verify HV output. Sold as-is for parts or repair — not guaranteed functional. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Caddock MG730 250K Ohm 1% Type MG Power Film Resistor High Voltage Axial
Caddock Electronics Inc
$15.00Was: $30.00Caddock MG730 250K Ohm 1% Type MG Power Film Resistor High Voltage AxialThe Caddock MG730 is a Type MG series power film resistor rated at 250K Ohm with 1% tolerance, using an axial-lead construction...46670- SKU:
- 46670
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Caddock
- Model:
- MG730
- MPN:
- MG730-250K-1%
- Type:
- Power Film Resistor
- Series:
- Type MG
- Resistance:
- 250K Ohm (250,000 Ohms)
- Tolerance:
- 1%
- Lead Style:
- Axial
- Technology:
- Power Film (Thick Film)
- Application:
- High Voltage, High Frequency, Precision
- SKU:
- 46670
- Condition:
- Used – Inspected and Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Single resistor, no accessories. Inspected and in good condition.
- Condition Notes:
- Caddock MG730 250K Ohm 1% Power Film Resistor. Inspected and in good used condition. Body markings legible, axial lead intact, no visible damage or burns. Pulled from service.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Caddock MS313 4.5 MEG Power Film Resistor 4500000 Ohm 1% Type MS Series
Caddock Electronics Inc
$12.00Was: $25.00Caddock MS313 4.5 MEG Power Film Resistor 4500000 Ohm 1% Type MS SeriesThis is a high-value power film resistor rated at 4.5 megohms with 1% tolerance. It is an axial through-hole component designed...46669- SKU:
- 46669
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.40 LBS
- Brand:
- Caddock
- Model:
- MS313
- MPN:
- MS313
- Type:
- Power Film Resistor
- SKU:
- 46669
- Resistance:
- 4.5 MEG (4,500,000 Ohm)
- Resistance (Ohms):
- 4500000
- Tolerance:
- 1%
- Series:
- Type MS
- Lead Length:
- Approx. 0.25 in (+/- 0.125 in)
- Lead Type:
- Axial
- Package / Case:
- Axial Through-Hole
- Country/Region of Manufacture:
- United States
- Condition:
- Used – Inspected
- Seller Notes:
- Single resistor; leads approx. 0.25 in (+/- 0.125 in)
- Condition Notes:
- Caddock MS313 4.5 MEG Power Film Resistor. Inspected and in good used condition. Label intact and legible. Light surface wear; leads approx. 0.25 in (+/- 0.125 in). No visible cracks or damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Caddock MS315 Power Film Resistor 500K Ohm 0.5 MEG 1% Tolerance Type MS
Caddock
$15.00Was: $30.00Caddock MS315 Power Film Resistor 500K Ohm 0.5 MEG 1% Tolerance Type MSThis is a Caddock MS315 Type MS Power Film Resistor rated at 500K Ohm (0.5 MEG) with a 1% tolerance. The MS series from Caddock...46665- SKU:
- 46665
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.40 LBS
- Brand:
- Caddock
- Model:
- MS315
- MPN:
- MS315-500K-1%
- Type:
- Power Film Resistor
- SKU:
- 46665
- Resistance:
- 500K Ohm (0.5 MEG)
- Tolerance:
- 1%
- Resistor Series:
- Type MS
- Lead Style:
- Axial
- Lead Length:
- Approx. 0.25 in (+/- 0.125 in)
- Package / Case:
- Cylindrical Molded Body
- Condition:
- Used – Pulled from Working Environment
- Country/Region of Manufacture:
- United States
- Seller Notes:
- Single resistor; leads approx. 0.25 in long. Pulled from working environment.
- Condition Notes:
- Caddock MS315 500K Ohm 1% Power Film Resistor. Inspected, good used condition. Pulled from a working environment. Body shows normal age/handling wear. Leads intact at approx. 0.25 in. No damage visible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$15.00Was: $30.00 -
Corcom 3ET3 EMI Power Line Filter 250VAC 3A 50/60Hz Hardwired RFI Suppressor
Corcom
$14.00Was: $30.00Corcom 3ET3 EMI Power Line Filter 250VAC 3A 50/60Hz Hardwired RFI SuppressorL-C Pi network power line filter designed to suppress electromagnetic interference and radio frequency noise on AC mains...46656- SKU:
- 46656
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Corcom
- Model:
- 3ET3
- MPN:
- 3ET3
- Type:
- EMI / RFI Power Line Filter
- SKU:
- 46656
- Rated Voltage:
- 250 VAC
- Rated Current:
- 3A
- Wiring / Termination:
- Hardwired leads with Molex-style connector and spade terminals
- Filter Topology:
- L-C Pi network (inductors + capacitors)
- Inductance:
- 2 x 36.3 mH
- Capacitance:
- 2 x 0.47 uF (X2), 2 x 0.004 uF (Y)
- Damping Resistor:
- 330K Ohms
- Country/Region of Manufacture:
- Mexico
- Certifications:
- UL, CSA, VDE (per label markings)
- Form Factor:
- Inline / Chassis-mount
- Condition:
- Used – Inspected
- Seller Notes:
- Hardwired unit with Molex-style input connector and spade output terminals.
- Condition Notes:
- Corcom 3ET3 EMI Power Line Filter, used and inspected. Metal housing intact with light surface marks from prior use. All leads intact; Molex connector and spade terminals present and in good shape.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$14.00Was: $30.00 -
Lucas Ledex 195444-001 Linear Solenoid with Arm Tape Drive Actuator 2-Pin
Lucas Ledex
$45.00Was: $90.00Lucas Ledex 195444-001 Linear Solenoid with Arm Tape Drive Actuator 2-PinLinear solenoid actuator designed for tape drive mechanisms and electromechanical automation systems. Features a solenoid body...46650- SKU:
- 46650
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Lucas Ledex
- Model:
- 195444-001
- MPN:
- 195444-001
- Type:
- Linear Solenoid with Actuator Arm
- SKU:
- 46650
- Condition:
- Used – Inspected
- Seller Notes:
- Includes solenoid body with mounting bracket, actuator arm, and 2-pin connector with lead wires.
- Country/Region of Manufacture:
- United States
- FSCM:
- 81840
- Connector Type:
- 2-Pin Molex-style connector
- Mounting Style:
- Bracket mount
- Application:
- Tape drive actuator / electromechanical automation
- Voltage Rating:
- Unknown — pulled from tape drive assembly
- Body Diameter (approx.):
- 1-1/4 in (approx. 32 mm)
- Overall Length (approx.):
- 2-1/4 in (approx. 57 mm) solenoid body
- Compatible With:
- Tape drive assemblies; industrial/automation equipment
- Condition Notes:
- Lucas Ledex 195444-001 linear solenoid with arm, inspected and in good used condition. Pulled from a tape drive assembly; voltage unknown. Light surface oxidation on housing; arm and wiring intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
Electroswitch 205 9722 0118 001 3-Position 3-Pole 16-Deck Rotary Selector Switch
Electroswitch
$35.00Was: $70.00Electroswitch 205 9722 0118 001 3-Position 3-Pole 16-Deck Rotary Selector SwitchThis is an Electroswitch multi-deck rotary selector switch with part number 205 9722 0118 001. It features 16 stacked...46584- SKU:
- 46584
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Electroswitch
- Model:
- 205 9722 0118 001
- MPN:
- 205 9722 0118 001
- Type:
- Multi-Deck Rotary Selector Switch
- SKU:
- 46584
- Number of Positions:
- 3
- Number of Poles:
- 3
- Number of Decks:
- 16
- Terminals per Deck:
- 9
- Includes:
- Pre-attached wire leads
- Switch Actuation:
- Rotary
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes pre-attached multi-color wire leads as shown in photos
- Country/Region of Manufacture:
- United States
- Condition Notes:
- This Electroswitch 205 9722 0118 001 16-Deck Rotary Selector Switch is in good used condition. Pulled from a working environment where it was in use and functional. Pre-attached wire leads included. Normal wear.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
Sprague Electric 99ZSPA44133 Toroidal Reactor Inductor Coil V8406 Electronic
Sprague Electric
$18.00Was: $40.00Sprague Electric 99ZSPA44133 Toroidal Reactor Inductor Coil V8406 ElectronicToroidal reactor inductor manufactured by Sprague Electric. This component functions as an electromagnetic device for...46309- SKU:
- 46309
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Sprague Electric
- Model:
- 99ZSPA44133
- MPN:
- 99ZSPA44133
- Type:
- Toroidal Reactor / Inductor
- SKU:
- 46309
- Date Code:
- V8406
- Form Factor:
- Toroidal / Cylindrical Body
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Single unit; inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Sprague Electric 99ZSPA44133 toroidal reactor/inductor. Inspected and in good condition. Clean body, no cracks or damage. Date code V8406 clearly legible. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
Filter Concepts 3E20-F 3X20A EMI Filter 3-Phase 250/440VAC 50/60Hz 20A
Filter Concepts
$75.00Was: $150.00Filter Concepts 3E20-F 3X20A EMI Filter 3-Phase 250/440VAC 50/60Hz 20AThe Filter Concepts 3E20-F is a three-phase EMI/RFI line filter rated at 20 amps per phase (3×20A) and designed for use on...46286- SKU:
- 46286
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 6.00 LBS
- Brand:
- Filter Concepts
- Model:
- 3E20-F
- MPN:
- 3E20-F
- Type:
- 3-Phase EMI / RFI Line Filter
- SKU:
- 46286
- Voltage Rating:
- 250/440VAC
- Current Rating:
- 20A per phase (3x20A)
- Phase:
- Three Phase
- Frequency:
- 50/60 Hz
- Number of Phases:
- 3
- Connector / Terminal Type:
- Screw terminals (stud-style), labeled A, B, C, N
- Form Factor:
- Panel Mount / Chassis Mount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Filter Concepts 3E20-F 3-Phase EMI Filter in good used condition. Pulled from a working environment. Enclosure shows surface oxidation and shop wear. Stud terminals intact. Rating label legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Schaffner FN2060-16-06 EMI Line Filter 110/250VAC 16A 50-60Hz IEC EN133200
Schaffner
$25.00Was: $50.00Schaffner FN2060-16-06 EMI Line Filter 110/250VAC 16A 50-60Hz IEC EN133200The Schaffner FN2060-16-06 is a single-phase EMI/RFI mains line filter rated for 110/250VAC at up to 16 amps continuous (at...46231- SKU:
- 46231
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Schaffner
- Model:
- FN2060-16-06
- MPN:
- FN2060-16-06
- Type:
- EMI / RFI Mains Line Filter
- SKU:
- 46231
- Voltage Rating:
- 110/250VAC
- Current Rating:
- 16A
- Frequency:
- 50-60Hz
- Phase:
- Single Phase
- Filter Topology:
- Two-stage LC, 0.33µF + 0.33µF, 2x0.65mH, 2x4.7nF (Y2)
- Leakage Resistance:
- 1MOhm
- Standards Compliance:
- IEC 60950, EN133200, UL Listed
- Country/Region of Manufacture:
- Switzerland
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Form Factor:
- Chassis Mount / Panel Mount
- Connector / Terminals:
- Quick-connect (faston) blade terminals
- Condition Notes:
- Schaffner FN2060-16-06 EMI line filter in good used condition. Inspected and pulled from a working environment. Label clean and legible; chassis shows light scuffing and adhesive residue on rear. Terminals intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Huntington Electric FSE-1000 HE11005 10 Ohm 5P Wirewound Resistor w/ Holder
Huntington Electric
$28.00Was: $60.00Huntington Electric FSE-1000 HE11005 10 Ohm 5P Wirewound Resistor w/ HolderThe Huntington Electric FSE-1000 is a tubular wirewound power resistor rated at 10 ohms with a 5% tolerance, identified by...46182- SKU:
- 46182
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Huntington Electric
- Model:
- FSE-1000
- MPN:
- HE11005
- Type:
- Wirewound Power Resistor
- SKU:
- 46182
- Resistance:
- 10 Ohm
- Tolerance:
- 5%
- Construction:
- Tubular Wirewound
- Mounting:
- Chassis Mount with Steel Holder/Bracket
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes steel mounting holder with bracket feet
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Huntington Electric FSE-1000 HE11005 10 Ohm 5P wirewound resistor. Tested and in working order. Steel mounting holder included. Light surface wear on bracket; markings fully legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
FST-1000 HE11035 10 Ohm Wire Wound Tubular Power Resistor Chassis Mount
Electrical
$49.50Was: $100.00FST-1000 HE11035 10 Ohm Wire Wound Tubular Power Resistor Chassis MountWire wound tubular power resistor rated at 10 ohms. Designed for use in industrial power control and drive systems where...46180- SKU:
- 46180
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 5.00 LBS
- Brand:
- Unbranded
- Model:
- FST-1000
- MPN:
- HE11035
- Secondary Model:
- HE11035 5P
- Type:
- Tubular Wire Wound Power Resistor
- SKU:
- 46180
- Resistance:
- 10 Ohm
- Construction:
- Wire Wound
- Form Factor:
- Tubular / Chassis Mount
- Mounting Style:
- Chassis Mount with Bracket
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Unit includes chassis mount brackets on both ends
- Compatible With:
- Industrial power control and drive systems
- Condition Notes:
- FST-1000 HE11035 10 Ohm tubular power resistor. Inspected, good used condition. Wire wound body intact, chassis mount brackets secure, label legible. Minor surface soiling and light bracket oxidation. No damage.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$49.50Was: $100.00 -
Phoenix Contact USLKG 35 Ground Terminal Block 1-Pole DIN Rail Earth PE
Phoenix Contact
$10.00Was: $20.00Phoenix Contact USLKG 35 Ground Terminal Block 1-Pole DIN Rail Earth PEThe Phoenix Contact USLKG 35 is a 1-pole protective earth (PE) ground terminal block designed for DIN rail mounting. It uses a...46044- SKU:
- 46044
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Phoenix Contact
- Model:
- USLKG 35
- MPN:
- USLKG 35
- Type:
- Ground Terminal Block
- SKU:
- 46044
- Number of Poles:
- 1
- Terminal Function:
- Protective Earth (PE) / Ground
- Mounting Type:
- DIN Rail
- Color:
- Yellow / Green
- Connection Method:
- Screw Clamp
- Wire Size (Max):
- 35 mm²
- Country/Region of Manufacture:
- Germany
- Form Factor:
- DIN Rail Module
- Seller Notes:
- Terminal block only; no DIN rail included.
- Compatible With:
- Standard 35mm DIN rail installations
- Condition:
- Used – Inspected and in Good Condition
- Condition Notes:
- Phoenix Contact USLKG 35 ground terminal block. Inspected and in good condition. Yellow/green housing shows light handling wear; no cracks or damage. Screw clamp contact intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$10.00Was: $20.00 -
Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10A
Phoenix Contact
$5.00Was: $10.00Phoenix Contact BK35/E 1-Pole Terminal Block DIN Rail K35/E K35 UK35 600V 10ASingle-pole DIN rail-mounted terminal block with screw terminals for electrical connections in industrial control and...46043- SKU:
- 46043
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Phoenix Contact
- Model:
- BK35/E
- MPN:
- BK35/E
- Type:
- DIN Rail Terminal Block
- SKU:
- 46043
- Number of Poles:
- 1
- Voltage Rating:
- 600V
- Current Rating:
- 10A
- Mounting Type:
- DIN Rail
- Compatible With:
- K35/E, K35, UK35
- Terminal Type:
- Screw Terminal
- Color:
- Gray
- Material:
- Thermoplastic
- Certifications:
- UL, CSA, VDE
- Condition:
- Used – Inspected and Tested
- Country/Region of Manufacture:
- Germany
- Seller Notes:
- Single 1-pole terminal block; no additional accessories included.
- Condition Notes:
- Phoenix Contact BK35/E 1-Pole DIN Rail Terminal Block. Inspected and in good condition. Housing intact, screw terminals and conductor bar undamaged, light surface soiling only.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$5.00Was: $10.00 -
Timonta FSW 2-65-6/0.5 EMI Suppression Filter 250V 6A 50/60Hz Single Phase
Timonta
$12.00Was: $25.00Timonta FSW 2-65-6/0.5 EMI Suppression Filter 250V 6A 50/60Hz Single PhaseThe Timonta FSW 2-65-6/0.5 is a single-phase EMI/RFI suppression filter rated for 250V AC at 6 amperes, 50/60Hz. Manufactured...46021- SKU:
- 46021
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Timonta
- Model:
- FSW 2-65-6/0.5
- MPN:
- FSW 2-65-6/0.5
- Type:
- EMI/RFI Suppression Filter
- SKU:
- 46021
- Voltage Rating:
- 250V AC
- Current Rating:
- 6A
- Frequency:
- 50/60Hz
- Phase:
- Single Phase
- Temperature Rating:
- 45°C
- Inductance:
- 2 x 0.8 mH
- X Capacitance:
- 2 x 0.1 µF (X)
- Y Capacitance (line):
- 2 x 1500 pF (Y)
- Y Capacitance (neutral):
- 2 x 1000 pF (Y)
- Connection Type:
- Faston / Quick-Connect Tab Terminals
- Enclosure:
- Metal (aluminum chassis)
- Country/Region of Manufacture:
- Switzerland
- Manufacturer Location:
- Timonta AG, CH-6850 Mendrisio
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; pulled from working environment, inspected, good condition.
- Condition Notes:
- Timonta FSW 2-65-6/0.5 EMI suppression filter. Pulled from a working environment. Inspected and in good used condition. Metal chassis shows light wear; terminals intact, label fully legible. No damage or corrosion.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single
Schaffner
$28.00Was: $60.00Schaffner FN2070-10-06 10A EMI Line Filter 110/250VAC 50-60Hz IEC960 Single PhaseSingle-phase EMI line filter designed to suppress electromagnetic interference on AC power lines. Features a 2-stage...46000- SKU:
- 46000
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Schaffner
- Model:
- FN2070-10-06
- MPN:
- FN2070-10-06
- Type:
- Single-Phase EMI Line Filter
- SKU:
- 46000
- Voltage Rating:
- 110/250VAC
- Current Rating:
- 10A
- Frequency:
- 50-60Hz
- Phase:
- Single Phase
- Standards Compliance:
- IEC960 Compatible
- Certifications:
- UL, CE
- Topology:
- 2-stage LC filter with common-mode chokes
- Inductance:
- 2x4.5mH (line/neutral)
- Capacitance:
- 1uF x2 (line-side), 1uF x2 (load-side), 2x4.7nF (Y-cap)
- Leakage Resistance:
- 220kOhm
- Connector Type:
- Faston / Quick-Connect Blade Terminals
- Country/Region of Manufacture:
- Switzerland
- Form Factor:
- Chassis Mount / Panel Mount
- Seller Notes:
- Filter only; no mounting hardware included.
- Condition Notes:
- Schaffner FN2070-10-06 10A EMI line filter in good used condition. Pulled from a working environment. Housing shows light surface wear. Terminals are clean and intact. No damage noted.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00