Electronic Components and Parts
-
Square D 8910-DPA52 2-Pole Definite Purpose Contactor 50A 115-575V Series B
Square D
$75.00Was: $150.00Square D 8910-DPA52 2-Pole Definite Purpose Contactor 50A 115-575V Series BA 2-pole definite purpose contactor rated for 50A full load amperage. Designed to switch and control motor loads in HVAC,...52896- SKU:
- 52896
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Square D
- Model:
- 8910-DPA52
- MPN:
- 8910DPA52V02
- Type:
- Definite Purpose Contactor
- SKU:
- 52896
- Class:
- Class 8910
- Series:
- Series B
- Number of Poles:
- 2
- Form:
- A
- Full Load Amps (FLA):
- 50A
- Resistance Load Rating:
- 62.5A
- Voltage Rating:
- 115–575V AC
- Maximum Voltage:
- 600V AC
- Coil Voltage:
- 120V 60Hz / 110V 50Hz
- AC Utilization Category:
- AC-8A
- Certifications:
- UL Listed, CSA
- Country/Region of Manufacture:
- Mexico
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Contactor only; no coil wiring accessories included.
- Compatible With:
- HVAC, refrigeration, heating, food service equipment
- Application:
- Definite Purpose / HVAC / Refrigeration / Food Service
- Condition Notes:
- Square D 8910-DPA52 2-Pole Definite Purpose Contactor, inspected, in good used condition. Pulled from a working environment. Labels intact and legible. Normal service wear on terminals.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Dallas Semiconductor DS1982U-F5 iButton 1KB EPROM 1-Wire Data Carrier Lot/10
Dallas Semiconductor
$45.00Was: $90.00Dallas Semiconductor DS1982U-F5 iButton 1KB EPROM 1-Wire Data Carrier Lot/10 The DS1982U-F5 is a 1-Wire EPROM data carrier housed in a rugged stainless steel iButton form factor. This compact device...52767- SKU:
- 52767
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Dallas Semiconductor
- Model:
- DS1982U-F5
- MPN:
- DS1982U-F5
- SKU:
- 52767
- Condition:
- New - Open Box
- Quantity:
- 10 pieces per lot
- Memory Capacity:
- 1KB (1024 bits) EPROM, user-programmable
- Protocol:
- 1-Wire serial communication
- Package / Form Factor:
- F5 iButton (stainless steel disk)
- Family Code:
- 09h
- Serial Number Type:
- 48-bit unique + 8-bit CRC + 8-bit Family Code
- Programming:
- User-programmable; write-protect capable
- Power Supply:
- Parasitic from 1-Wire line (no external supply)
- Data Transfer:
- Serial via 1-Wire single data lead + ground return
- Compatible With:
- Optibreed Analyzer credit card systems
- Compatible With 2:
- Any 1-Wire host controller (microcontroller)
- Country of Manufacture:
- United States
- Seller Notes:
- Open-box units, may have adhesive residue on back contact face
- Condition Notes:
- DS1982U-F5 iButton open-box units, previously attached to Optibreed cards. Some may have adhesive residue on back contact face. Stainless steel casings in good condition; all electronics intact and functional.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
- Type:
- 1-Wire EPROM Data Carrier (iButton)
- Package/Form Factor:
- F5 iButton stainless steel disk
- Programming Feature:
- Write-protect capable
- Interface:
- Single data lead + ground return
- Compatible With 1:
- Optibreed Analyzer credit card systems
- Country/Region of Manufacture:
- United States
$45.00Was: $90.00 -
3M EPS-300 Heat Shrink Tubing 3/16in x 48in Black 3:1 Polyolefin 200ft Bag of 50
3M
$150.00Was: $300.003M EPS-300 Heat Shrink Tubing 3/16in x 48in Black 3:1 Polyolefin 200ft Bag of 50Dual-wall adhesive-lined heat shrink tubing for sealing and insulating wire splices and cable bundles. The inner...52620- SKU:
- 52620
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- 3M
- Model:
- EPS-300
- MPN:
- EPS-300
- Type:
- Dual-Wall Adhesive-Lined Heat Shrink Tubing
- SKU:
- 52620
- Material:
- Flexible Polyolefin (outer), Thermoplastic Adhesive (inner)
- Color:
- Black
- Inside Diameter (Before Shrink):
- 3/16 in (4.8 mm)
- Length Per Piece:
- 48 in (4 ft)
- Quantity Per Bag:
- 50 pieces
- Total Length:
- 200 ft
- Shrink Ratio:
- 3:1
- Voltage Rating:
- 600V
- Temperature Range:
- -67°F to 230°F (-55°C to 110°C)
- Flame Retardant:
- Yes
- Certifications:
- UL Listed, CSA Certified
- Application:
- Wire splices, bundles, harness breakouts, automotive, marine
- Date of Manufacture:
- 05/10/2011
- Expiration Date:
- 05/10/2021
- Part Number:
- 80-6102-9452-4
- Seller Notes:
- Bag of 50 sticks (200ft total), new in original sealed plastic bag.
- Country/Region of Manufacture:
- United States
- Condition:
- New
- Condition Notes:
- 3M EPS-300 Heat Shrink Tubing is new in the original sealed bag, 50 sticks/200ft. Note: MFG date 05/10/2011, expiration 05/10/2021 — consider adhesive liner age. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$150.00Was: $300.00 -
Panasonic 32EK241 ZNR Varistor 240V 1.2W 395V Clamping Surge Suppressor MOV
Panasonic
$12.00Was: $25.00Panasonic 32EK241 ZNR Varistor 240V 1.2W 395V Clamping Surge Suppressor MOVMetal oxide varistor (MOV) designed for surge suppression and transient overvoltage protection. This zinc oxide component...50368- SKU:
- 50368
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Panasonic
- Model:
- 32EK241
- MPN:
- 32EK241
- Type:
- ZNR Metal Oxide Varistor (MOV)
- SKU:
- 50368
- Varistor Voltage:
- 240V
- Maximum Clamping Voltage:
- 395V
- Rated Power:
- 1.2W
- Technology:
- Zinc Oxide (ZnO) Metal Oxide Varistor
- Application:
- Surge Suppression / Transient Overvoltage Protection
- Mounting Style:
- PCB Through-Hole / Panel Mount
- Termination:
- Spade / Lug Terminals
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Component only; no additional accessories included.
- Country/Region of Manufacture:
- Japan
- Condition Notes:
- Panasonic 32EK241 ZNR varistor, 240V, 1.2W. Inspected and in good condition. Pulled from a working environment. Body and terminals intact, no visible damage. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Solitron 7846 C664 Solid State Rectifier Tube Socket Board Lot of 6 AS-IS
Lot of 1
$45.00Was: $90.00Solitron 7846 C664 Solid State Rectifier Tube Socket Board Lot of 6 AS-ISThis lot contains six Solitron 7846 solid state rectifiers mounted on green PCB boards with ceramic tube sockets. These...47196- SKU:
- 47196
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 11.00 LBS
- Brand:
- Solitron
- Model:
- 7846
- MPN:
- C664
- Secondary Model:
- C664
- Type:
- Solid State Rectifier with Tube Sockets
- SKU:
- 47196
- Quantity in Lot:
- 6
- Condition:
- As-Is / For Parts or Not Working
- Mounting:
- PCB Board Mounted
- Socket Type:
- Ceramic Tube Socket
- Application:
- High Voltage Power Supply, Tube Amplifier Replacement
- Seller Notes:
- Lot of 6 rectifiers with ceramic tube sockets on a green PCB board. Sold AS-IS, untested.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Solitron 7846 C664 Solid State Rectifier lot of 6 sold AS-IS for parts or repair. Could not be tested at our facility. Visible oxidation on rectifier bodies. Ceramic sockets and hardware appear intact.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$45.00Was: $90.00 -
DIN Rail Terminal Block Lot Eaton WMZS1C05 RS4N-DE Weidmuller WDK 2.5 Relay
Lot of 1
$115.00Was: $225.00DIN Rail Terminal Block Lot Eaton WMZS1C05 RS4N-DE Weidmuller WDK 2.5 RelayLot of 75 DIN rail-mounted components pulled from a working industrial control panel. Includes terminal blocks, a mini...48256- SKU:
- 48256
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 8.00 LBS
- Brand:
- Multiple (Eaton, Weidmuller, ME Euro)
- Model:
- WMZS1C05
- MPN:
- WMZS1C05
- Secondary Model:
- RS4N-DE
- Type:
- DIN Rail Terminal Block and Relay Lot
- SKU:
- 48256
- Seller Notes:
- Lot of 75 components + 32.5in aluminum DIN rail; see description for full qty breakdown
- Condition:
- Used – Pulled from Working Environment
- Form Factor:
- DIN Rail Mount
- Component 1:
- ME Euro E4 Single Stack Terminal Block – Qty 1
- Component 2:
- ME Euro 2.5 Single Stack Terminal Block – Qty 7
- Component 3:
- Eaton WMZS1C05 Mini Circuit Breaker 10kA 277VAC – Qty 1
- Component 4:
- Weidmuller WDK 2.5 ZQV Double Stack Terminal Block – Qty 34
- Component 5:
- ME Euro W 2.5/35 Three Stack Terminal Block – Qty 28
- Component 6:
- RS4N-DE Card Relay 5A SPST 4 Relays 24VDC Coil – Qty 4
- Component 7:
- Aluminum DIN Rail – 32.5 inches included
- Circuit Breaker Rating:
- 10kA, 277VAC, 5A (Eaton WMZS1C05)
- Relay Coil Voltage:
- 24VDC
- Relay Contact Rating:
- 5A SPST
- Relay Configuration:
- 4 relays per card (SPST)
- Terminal Block Wire Size:
- 2.5mm²
- DIN Rail Type:
- Aluminum, 35mm standard (TS35)
- Total Terminal Block Count:
- 70 terminal blocks (various types)
- Compatible With:
- 35mm DIN rail, IEC standard control panels
- Country/Region of Manufacture:
- Germany (Eaton, Weidmuller)
- Condition Notes:
- Lot of DIN rail terminal blocks, Eaton WMZS1C05 breaker, and RS4N-DE relay cards pulled from a working control panel. Good used condition with typical installation wear. Includes ~32.5in aluminum DIN rail.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$115.00Was: $225.00 -
Epelsa LC 5 Load Cell 1000 lb 450 kg 1Klb Capacity 3mV/V Shear Beam Sensor
Epelsa
$75.00Was: $150.00Epelsa LC 5 Load Cell 1000 lb 450 kg 1Klb Capacity 3mV/V Shear Beam SensorShear beam load cell for industrial weighing applications. Rated 1000 lb capacity with 3 mV/V output sensitivity and OIML...48767- SKU:
- 48767
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Epelsa
- Model:
- LC 5
- MPN:
- LC 5
- Type:
- Shear Beam Load Cell
- SKU:
- 48767
- Capacity:
- 1000 lb / 450 kg (1Klb)
- Safe Load Limit:
- 1200 lb (1.2Klb)
- Output Sensitivity:
- 3 mV/V
- Minimum Load (Vmin):
- 0.05 lb
- Minimum Dead Load:
- 0
- Body Dimensions:
- 5.125 in x 1.25 in x 1.25 in
- Plate Dimensions:
- 1.5 in x 1.125 in
- Mounting Hole Diameter:
- 0.5 in
- Accuracy Class:
- M5 (OIML Class III)
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes attached cable. Pulled from working environment.
- Country/Region of Manufacture:
- Spain
- Form Factor:
- Compact Block / Shear Beam
- Compatible With:
- Platform scales, conveyor scales, industrial weighing systems
- Condition Notes:
- Epelsa LC 5 shear beam load cell, inspected and in good used condition. Pulled from a working environment. Shows surface oxidation near cable gland and light body scuffing. Cable included. Please contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
Bourns 3400S-612-204 Series 3400 Precision Potentiometer 200K Ohm 3-Terminal
Bourns
$28.00Was: $60.00Bourns 3400S-612-204 Series 3400 Precision Potentiometer 200K Ohm 3-TerminalA 3-terminal precision potentiometer rated at 200K ohm with ±3% linearity tolerance. Used in adjustment and measurement...49122- SKU:
- 49122
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Bourns
- Model:
- 3400S-612-204
- MPN:
- 3400S-612-204
- Type:
- Precision Potentiometer
- SKU:
- 49122
- Series:
- Series 3400
- Resistance:
- 200K Ohm
- Resistance Range:
- 2 Ohm to 204K Ohm
- Tolerance:
- ±3% Linearity
- Number of Terminals:
- 3
- Shaft Length:
- 40 mm
- Shaft Diameter:
- 6 mm
- Mounting Style:
- Panel Mount
- Country/Region of Manufacture:
- Mexico
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- Bourns 3400S-612-204 Precision Potentiometer inspected and in good used condition. Housing intact, shaft straight, terminal pins present. Light surface wear visible. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
CMC Alarm-Matic System 4000 Rackmount Alarm Control Panel Wire Wrap PCB
CMC
$300.00Was: $600.00CMC Alarm-Matic System 4000 Rackmount Alarm Control Panel Wire Wrap PCBThe CMC Alarm-Matic System 4000 is a rackmount telephone and telecom alarm monitoring and control system housed in an aluminum...9390- SKU:
- 9390
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 17.00 LBS
- Brand:
- CMC
- Model:
- Alarm-Matic System 4000
- MPN:
- System 4000
- Type:
- Rackmount Alarm Control Panel
- SKU:
- 9390
- Form Factor:
- Rackmount
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes wire wrap PCB, toggle switches, horn, push-button alarm reset, and indicator lamps
- Enclosure Material:
- Aluminum
- Front Panel Controls:
- Power switch, Attended/Unattended, Alternate/Primary, A/B, Induce toggles
- Alarm Functions:
- Major/Minor indicators, Alarm Reset button, audible horn
- Line Connections:
- Line 1 and Line 2 Tip/Ring terminals on front panel
- Monitor Points:
- 24-point monitor panel (Attended, Ports 0-3, Dial Request, Relays, RC Digits, Parity, Ring Latch, Timing, Reclassified)
- Circuit Board Type:
- Wire wrap circuit board
- Rack Ears:
- Included
- Application:
- Telephone/telecom alarm monitoring and control system
- Condition Notes:
- CMC Alarm-Matic System 4000 alarm panel inspected and in good condition. Pulled from a working environment. Wire wrap PCB, toggle switches, horn, alarm reset, and indicator lamps all present. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$300.00Was: $600.00 -
Black Box LD485S ME741A RS-485 Serial Interface Module w/ Power Supply
Black Box
$65.00Was: $125.00Black Box LD485S ME741A RS-485 Serial Interface Module w/ Power SupplyThe Black Box LD485S (ME741A) is a professional-grade RS-485 serial interface module designed for industrial data communications...7256- SKU:
- 7256
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 7.00 LBS
- Brand:
- Black Box
- Model:
- LD485S
- Secondary Model:
- ME741A
- Type:
- RS-485 Serial Interface Module
- SKU:
- 7256
- Interface Type:
- RS-485
- Connector Type:
- Terminal Block / D-Sub (RS-485)
- Seller Notes:
- Includes original power supply
- Country/Region of Manufacture:
- United States
- Form Factor:
- Desktop / Benchtop Module
- Condition:
- Used - Pulled from Working Environment
- Condition Notes:
- Black Box LD485S ME741A RS-485 interface module in good used condition, pulled from working environment. Includes original power supply. Visually inspected.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
HP A1558-62024 SCSI Terminator Single Ended Active REV-B
HP
$20.00Was: $40.00HP A1558-62024 SCSI Terminator Single Ended Active REV-BThis is an active SCSI terminator module designed for HP and compatible SCSI systems. SCSI terminators are essential components that terminate...19243- SKU:
- 19243
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- HP
- Model:
- A1558-62024
- MPN:
- A1558-62024
- Type:
- SCSI Terminator
- SKU:
- 19243
- Terminator Type:
- Single Ended Active
- Revision:
- REV-B
- Interface:
- SCSI
- Condition:
- Used – Inspected
- Condition Notes:
- HP A1558-62024 SCSI terminator, REV-B, single-ended active. Inspected and in good used condition. Ready to use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$20.00Was: $40.00 -
Scientific Solutions 943244 Rev B AD Analog Multiplexer Module For Parts
$50.00Was: $100.00Scientific Solutions 943244 Rev B AD Analog Multiplexer Module For PartsThis is an analog multiplexer PCB module designed for signal switching and data acquisition. The module routes multiple analog...33465- SKU:
- 33465
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Scientific Solutions
- Model:
- 943244
- MPN:
- 943244
- Secondary Model:
- 943244 Rev B
- Type:
- Analog Multiplexer Module (PCB)
- SKU:
- 33465
- Condition:
- As-Is / For Parts or Not Working
- Seller Notes:
- Sold as-is for parts or repair. Includes housing/enclosure with PCB.
- Country/Region of Manufacture:
- United States
- Form Factor:
- Enclosed Module / Desktop
- Revision:
- Rev B
- PCB Label:
- AD Analog Multiplexer, Component Side
- Copyright Year:
- 1991
- Connector Type:
- 50-Pin Female SCSI-Style / Centronics
- Input Termination:
- Screw Terminal Blocks
- Key ICs:
- Maxim MAX series ICs (multiple, exact P/Ns not fully legible)
- Application:
- Data Acquisition, Signal Multiplexing, Lab Instrumentation
- Interface Type:
- 50-Pin Parallel (Centronics-style)
- Condition Notes:
- Scientific Solutions 943244 Rev B Analog Multiplexer sold as-is for parts or repair. Not tested, no functionality guaranteed. Enclosure and PCB appear intact. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$50.00Was: $100.00 -
STMicroelectronics P6KE6V8A TVS Transient Voltage Suppressor Diode DO-41 Qty 10
STMICROELECTRONICS
$9.00Was: $17.50STMicroelectronics P6KE6V8A TVS Transient Voltage Suppressor Diode DO-41 Qty 10This listing is for a lot of 10 STMicroelectronics P6KE6V8A bidirectional transient voltage suppressor (TVS) diodes in...35120- SKU:
- 35120
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 0.95 LBS
- Brand:
- STMicroelectronics
- Model:
- P6KE6V8A
- MPN:
- P6KE6V8A
- Type:
- Transient Voltage Suppressor (TVS) Diode
- SKU:
- 35120
- Package Type:
- DO-41
- Peak Pulse Power:
- 600W at 1.0 ms
- Clamping Voltage:
- Starts clamping at 7V
- Breakdown Voltage:
- 6.8V
- Response Time:
- 5.0 ns
- Polarity:
- Bidirectional
- Junction Type:
- Glass passivated
- Lead Diameter:
- 0.033 in (0.85 mm)
- Lead Length:
- 1.1 in each
- Body Dimensions:
- 0.25 in long x 0.13 in diameter
- Quantity:
- 10
- Application:
- ESD protection, overvoltage suppression, surge clamping
- Country/Region of Manufacture:
- China
- Condition:
- Open Box – New components, out of original packaging
- Seller Notes:
- Lot of 10 P6KE6V8A TVS diodes, banded; open box, new old stock
- Condition Notes:
- STMicroelectronics P6KE6V8A TVS diodes, new old stock, out of original packaging. Unused/unsoldered. Leads show minor surface weathering from storage; solderability expected to be good. Sold as a lot of 10, banded.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$9.00Was: $17.50 -
Littelfuse 5KP22CA TVS Diode 5kW 22V Transient Voltage Suppressor Lot of 10
Littlefuse
$12.00Was: $25.00Littelfuse 5KP22CA TVS Diode 5kW 22V Transient Voltage Suppressor Lot of 10The Littelfuse 5KP22CA is a bidirectional 5kW transient voltage suppressor (TVS) diode designed to protect sensitive...35121- SKU:
- 35121
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 0.50 LBS
- Brand:
- Littelfuse
- Model:
- 5KP22CA
- MPN:
- 5KP22CA
- Type:
- TVS Diode – Transient Voltage Suppressor
- SKU:
- 35121
- Quantity:
- 10 pieces per lot
- Peak Pulse Power:
- 5000W (5kW) at 1.0ms
- Standoff Voltage (Vwm):
- 22V
- Breakdown Voltage:
- 24.4V minimum
- Clamping Voltage (Vc):
- Starts clamping at 26.5V
- Polarity:
- Bidirectional (CA suffix)
- Response Time:
- 5.0 ns
- Package / Case:
- DO-201 axial leaded
- Package Dimensions:
- 0.28" long x 0.375" dia; leads 1.1" each
- Lead Diameter:
- 0.042" (1.07mm)
- Junction Type:
- Glass passivated
- Seller Notes:
- Sold in a lot of 10 components. Minor surface weathering; solderability confirmed.
- Country/Region of Manufacture:
- China
- Application:
- ESD protection, surge suppression, transient clamping
- Condition:
- New
- Condition Notes:
- New Littelfuse 5KP22CA TVS diodes. Minor surface weathering from storage — cosmetic only, solderability unaffected. Lot of 10 on tape carrier. Please view our photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Fairchild MMBT2222AR-R PNP SOT-23 Transistor R2T SMD 40V 0.5A Qty 10 TSOT23
Fairchild
$3.00Was: $6.00Fairchild MMBT2222AR-R PNP SOT-23 Transistor R2T SMD 40V 0.5A Qty 10 TSOT23PNP bipolar junction transistor in SOT-23 surface mount package. Used for switching and amplification in low-signal...35122- SKU:
- 35122
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Fairchild
- Model:
- MMBT2222AR-R
- MPN:
- MMBT2222AR-R
- Secondary Model:
- TSOT23-2222A
- SKU:
- 35122
- Type:
- PNP Bipolar Junction Transistor (BJT)
- Package / Case:
- SOT-23 (3-pin SMD)
- Transistor Polarity:
- PNP
- Device Marking:
- R2T
- Voltage - Collector Emitter Breakdown (Max):
- ~40V
- Current - Collector (Ic) (Max):
- ~0.5A
- Mounting Type:
- Surface Mount (SMD/SMT)
- Quantity:
- 10 pieces (on tape)
- Complementary Device:
- 2N2222A / MMBT2222A (NPN)
- Pin Configuration:
- Base lower-left, Emitter right, Collector top (R2T up)
- Seller Notes:
- Sold as a pack of 10 on tape. New old stock.
- Country/Region of Manufacture:
- Philippines
- Form Factor:
- SMD / Surface Mount
- Condition Notes:
- Fairchild MMBT2222AR-R PNP SOT-23 transistors, new old stock, pack of 10 on tape. Unused, new condition. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$3.00Was: $6.00 -
ON Semiconductor DF08S Bridge Rectifier 800V 1.5A 1.1V Vf SMD SMA Qty 10
ON Semiconductor
$7.00Was: $15.00ON Semiconductor DF08S Bridge Rectifier 800V 1.5A 1.1V Vf SMD SMA Qty 10Bridge rectifier for converting AC to DC in power supply circuits. Single-phase full-wave configuration with 800V peak reverse...35129- SKU:
- 35129
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.50 LBS
- Brand:
- ON Semiconductor
- Model:
- DF08S
- MPN:
- DF08S
- Type:
- Bridge Rectifier
- SKU:
- 35129
- Quantity:
- 10 (sold as a set in tape strip)
- Package / Case:
- SMA (SMD Surface Mount)
- Peak Reverse Voltage (PRV):
- 800 V
- Forward Current (If):
- 1.5 A
- Forward Voltage (Vf) Max:
- 1.1 V
- Max Surge Current (IFSM):
- 50 A
- Mount Type:
- Surface Mount (SMD)
- Configuration:
- Single-Phase Full-Wave Bridge
- Country/Region of Manufacture:
- China
- Seller Notes:
- Set of 10 units, supplied in tape strip as photographed
- Condition:
- New
- Condition Notes:
- ON Semiconductor DF08S Bridge Rectifiers are new and unused, supplied in a tape strip of 10 units. Original manufacturer packaging may not be included. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$7.00Was: $15.00 -
Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring
Light Grid Assembly
$35.00Was: $70.00Light Grid Assembly C15186-1 FSCM 02145 Fluorescent Lamp Array w/ Wiring Fluorescent lamp grid assembly with aluminum frame and integrated wiring. Contains lamp tubes mounted in a rectangular array...36982- SKU:
- 36982
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- C15186-1
- MPN:
- C15186-1
- Type:
- Fluorescent Lamp Grid Assembly
- SKU:
- 36982
- FSCM:
- 02145
- Date Code:
- 5/81
- Quantity:
- 1 EA
- Condition:
- As-Is / For Parts or Not Working
- Frame Material:
- Aluminum
- Wiring:
- Red and green wire leads included
- Seller Notes:
- Sold AS-IS for parts. Includes lamp tubes and wiring leads in aluminum frame.
- Condition Notes:
- Light Grid Assembly C15186-1 sold AS-IS for parts or repair. Not tested, no functionality guaranteed. Dust and soiling visible on lamp tubes. Aluminum frame intact; wiring leads present. Please review photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
TDK ZAC2206-11 Inline Noise Filter 250V 6A 50/60Hz EMI RFI Line Filter Japan
TDK
$18.00Was: $40.00TDK ZAC2206-11 Inline Noise Filter 250V 6A 50/60Hz EMI RFI Line Filter JapanThis is an inline EMI/RFI noise filter designed to suppress electromagnetic interference and radio frequency interference...47902- SKU:
- 47902
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 1.00 LBS
- Brand:
- TDK
- Model:
- ZAC2206-11
- MPN:
- ZAC2206-11
- Type:
- Inline EMI/RFI Noise Filter
- SKU:
- 47902
- Voltage Rating:
- 250V AC
- Current Rating:
- 6A
- Frequency:
- 50/60Hz
- Test Voltage:
- 2.5kV AC
- Inductance:
- L: 4 x 1.8mH
- Resistance:
- R: 2 x 2MΩ
- Capacitance (X2):
- X2: 3 x 0.1µF (SH)
- Capacitance (Y):
- Y: 2 x 4700pF
- Filter Configuration:
- HPF (High-Pass Filter)
- Connection Type:
- Screw terminal (stud)
- Certifications:
- UL Listed, CSA Listed
- Country/Region of Manufacture:
- Japan
- Form Factor:
- Inline / Panel Mount
- Power Requirements:
- 250V AC, 50/60Hz
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- TDK ZAC2206-11 Inline Noise Filter inspected and in good used condition. Pulled from a working environment. Light surface wear on housing; all stud terminals intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
Omron STI KT-ARC 43127-0010 Noise Arc Suppression Network Kit Electrocube RC
Omron
$22.00Was: $40.00Omron STI KT-ARC 43127-0010 Noise Arc Suppression Network Kit Electrocube RCThe Omron Scientific Technologies (STI) KT-ARC is a Noise and Arc Suppression Network Kit designed to reduce electrical...49084- SKU:
- 49084
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Omron Scientific Technologies (STI)
- Model:
- KT-ARC
- MPN:
- 43127-0010
- Type:
- Noise and Arc Suppression Network Kit
- SKU:
- 49084
- Seller Notes:
- Kit includes two Electrocube RG1986-7 RC snubber networks, new in original sealed bag.
- Country/Region of Manufacture:
- United States
- Component Part Number:
- RG1986-7 (Electrocube)
- Resistance:
- 150 Ohm, 10%
- Capacitance:
- 50 MFD, 10%
- Voltage Rating:
- 600VDC
- Power Rating:
- 1/2 Watt
- Quantity in Kit:
- 2 RC snubber networks
- Application:
- Relay coil noise and arc suppression, motor control
- Condition Notes:
- Omron STI KT-ARC 43127-0010 Noise Arc Suppression Kit is new and unused in original sealed bag. Both Electrocube RG1986-7 RC snubbers included. No wear observed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$22.00Was: $40.00 -
Weidmuller Assorted White Cable Conduit Markers Blank & Numbered ESG SFX SFC
LOT of 2
$35.00Was: $70.00Weidmuller Assorted White Cable Conduit Markers Blank & Numbered ESG SFX SFCThis is an assorted lot of Weidmuller white plastic cable and conduit markers, including both blank markers and strips with...48622- SKU:
- 48622
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Weidmuller
- Model:
- ESG / SFX / SFC Series
- MPN:
- ESG 9/20, SFX 10/23, SFC 2/21, ESG 9/17K
- Type:
- Cable / Conduit Markers
- SKU:
- 48622
- Color:
- White
- Marking:
- Blank and Pre-Numbered (assorted)
- Series:
- ESG, SFX, SFC
- Application:
- Wire, Cable, and Conduit Identification
- Material:
- Plastic
- Quantity:
- Lot / Assorted (multiple sheets — see photos)
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Assorted lot; includes blank and numbered markers across ESG, SFX, SFC series in original Weidmuller box.
- Country/Region of Manufacture:
- Germany
- Condition Notes:
- Lot of Weidmuller white cable/conduit markers (ESG, SFX, SFC series) inspected and in good condition. Mix of blank and pre-numbered strips in original box with normal shelf wear. Markers appear clean and undamaged.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00