Electronic Components and Parts

Electronic Components and Parts

  • TDK ZCW2210-01 Noise Filter front-top view showing label with model number and ratings TDK ZCW2210-01 Noise Filter rear-top angle view showing opposite side of housing

    TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter Japan

    TDK

    $28.00
    Was: $60.00
    TDK ZCW2210-01 Noise Filter 250V AC 10A 1500V AC EMI Line Filter JapanThe TDK ZCW2210-01 is a panel-mount EMI/RFI noise filter designed to suppress conducted electromagnetic interference on AC power...
    45664
    SKU:
    45664
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    TDK
    Model:
    ZCW2210-01
    MPN:
    ZCW2210-01
    Type:
    EMI / RFI Noise Filter
    SKU:
    45664
    Voltage Rating (WV):
    250V AC
    Current Rating:
    10A
    Test Voltage (TV):
    1500V AC
    Lot Number:
    KK 9907
    Country/Region of Manufacture:
    Japan
    Manufacturer:
    TDK Corporation
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; no accessories included.
    Form Factor:
    Panel / Chassis Mount
    Terminals:
    3-phase terminal configuration (R, S, T / line and load)
    Connection Type:
    Screw terminal (through-body conductors)
    Condition Notes:
    TDK ZCW2210-01 Noise Filter inspected and in good used condition. Housing is clean with minor surface marks. Label intact and legible. Terminal conductors present and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • Olson 3908 Data Protector Mains RF Filter front view showing 8 IEC C13 outlets and blue control panel with red pilot light Olson 3908 Data Protector Mains RF Filter rear/bottom view showing gray aluminum housing and warning label

    Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3A

    Olson

    $55.00
    Was: $100.00
    Olson 3908 Data Protector Mains RF Filter Spike Transient Suppressor 250V 6.3AThe Olson 3908 Data Protector is a mains-line RF filter combined with spike and transient suppression, designed to clean...
    45628
    SKU:
    45628
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    Olson Electronics
    Model:
    3908
    MPN:
    3908
    Type:
    Mains RF Filter / Spike & Transient Suppressor
    SKU:
    45628
    Voltage Rating:
    250V AC
    Current Rating:
    6.3A Maximum
    Fuse Rating:
    6.3A
    Number of Outlets:
    8
    Outlet Type:
    IEC C13
    Features:
    RF/EMI filtering, spike suppression, transient suppression
    Power Indicator:
    Red pilot light on front panel
    Form Factor:
    Rackmount / Panel-Mount Strip
    Country/Region of Manufacture:
    United Kingdom
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Unit only; inspected and in good condition.
    Condition Notes:
    Olson 3908 Mains RF Filter inspected and in good condition. Aluminum housing is clean, front panel label clear, 8x IEC C13 outlets intact. Normal light use. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • Computer Power Systems CiA DPM Board 102216 – front side showing ICs, resistors, and capacitors on green PCB Computer Power Systems 102216 DPM Board – solder side showing 'Assembled in Mexico' stamp and edge connector traces

    Computer Power Systems CiA DPM Board 102216 Clock Driver Display System 102925

    Computer Power Systems

    $60.00
    Was: $125.00
    Computer Power Systems CiA DPM Board 102216 Clock Driver Display System 102925DPM display driver PCB module designed for use in Computer Power Systems clock driver display systems. This circuit board...
    44562
    SKU:
    44562
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    0.95 LBS
    Brand:
    Computer Power Systems
    Model:
    102216
    MPN:
    102216
    Secondary Model:
    102925
    Type:
    DPM Display Driver PCB / Circuit Board
    SKU:
    44562
    Compatible With:
    Clock Driver Display System 102925
    Form Factor:
    PCB / Card Module
    Country/Region of Manufacture:
    Mexico
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Board only; pulled from Clock Driver Display System 102925
    Condition Notes:
    Computer Power Systems CiA DPM Board 102216 pulled from a working Clock Driver Display System 102925. Inspected, in good condition, no obvious damage. Normal service wear. Board only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • Guzik 300663 External Differential AEI PCB front view showing full component side with ICs, inductors, and capacitors Guzik 300663 AEI circuit board angled top view showing reverse side orientation with green sticker and component layout

    Guzik 300663 External Differential PCB AEI Circuit Board 15/92 Made in USA

    Guzik

    $65.00
    Was: $125.00
    Guzik 300663 External Differential PCB AEI Circuit Board 15/92 Made in USAThe Guzik 300663 is an External Differential PCB designated as an AEI (Analog Electronics Interface) circuit board,...
    42742
    SKU:
    42742
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    Guzik
    Model:
    300663
    MPN:
    300663
    Type:
    External Differential Circuit Board / PCB
    SKU:
    42742
    Seller Notes:
    Board only, no additional accessories included.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Bare PCB / Card
    Board Designation:
    AEI External Differential
    PCB Date Code:
    15/92
    Condition:
    Used – Pulled from Working Environment
    Condition Notes:
    Guzik 300663 External Differential AEI PCB in good used condition. Pulled from a working environment where it was in use and functional. Inspected; no obvious damage. Board only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Mallory M500PK Potentiometer 500 Ohm 4 Watt – front of original blue and white Mallory box showing model and specs Mallory M500PK Potentiometer – side and top view of original Mallory blue box showing brand logo

    Mallory M500PK Potentiometer 500 Ohm 4 Watt Wirewound Rotary V12 USA

    Mallory

    $15.00
    Was: $30.00
    Mallory M500PK Potentiometer 500 Ohm 4 Watt Wirewound Rotary V12 USA A wirewound rotary potentiometer manufactured by Mallory. This panel-mount component provides variable resistance control in...
    41495
    SKU:
    41495
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Mallory
    Model:
    M500PK
    MPN:
    M500PK
    Type:
    Wirewound Rotary Potentiometer
    SKU:
    41495
    Resistance:
    500 Ohm
    Power Rating:
    4 Watt
    Taper:
    Linear (wirewound)
    Mounting Type:
    Panel Mount
    Terminal Type:
    Solder Lug
    Shaft Type:
    Knurled Brass
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected
    Seller Notes:
    Includes original Mallory box. V12 date/lot code visible on unit.
    Condition Notes:
    New, unused. Light storage oxidation on housing. Shaft, bushing, terminals intact. Original Mallory box included with shelf wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $15.00
    Was: $30.00
  • Advance Relay GHA/2C/6VDC original box front showing model number, DPDT, 5A contact and 6V DC coil specs Advance Relay GHA/2C/6VDC box side showing Elgin National Watch Company Electronics Division Burbank California label

    Advance Relay GHA/2C/6VDC DPDT Medium Power Relay 6V DC 25 Ohm 1.5W 5A

    Advance Relay

    $18.00
    Was: $40.00
    Advance Relay GHA/2C/6VDC DPDT Medium Power Relay 6V DC 25 Ohm 1.5W 5AElectromechanical relay with dual pole, dual throw contact configuration. Operates on 6V DC with 5A contact rating, suitable for...
    41493
    SKU:
    41493
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    Advance Relay
    Model:
    GHA/2C/6VDC
    MPN:
    GHA/2C/6VDC
    Type:
    Electromechanical DPDT Relay
    SKU:
    41493
    Coil Voltage:
    6V DC
    Coil Resistance:
    25 Ohms
    Coil Power:
    1.5 Watts
    Contact Configuration:
    DPDT (Double Pole Double Throw)
    Contact Rating (Current):
    5 Amps
    Contact Rating (Voltage):
    26.5 VDC or 115 VAC
    Power Rating:
    1.5 Watts
    Manufacturer:
    Elgin National Watch Company, Electronics Division
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes original Advance Relay box (box shows wear)
    Form Factor:
    Open Frame / PCB Mount
    Condition Notes:
    Advance Relay GHA/2C/6VDC DPDT relay inspected and in good condition. Includes original box showing age wear. Relay body shows normal age patina; contact terminals and leads intact. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • Extender Board Logic 114473-001 Rev B PCB module — top view showing green PCB body and gold-finger edge connector along top edge Extender Board Logic 114473-001 Rev B PCB module — reverse side view showing blue card-edge connector along bottom and partial label in upper left

    Extender Board Logic PCB Module Assy 114473-001 Rev B Logic Analyzer Card

    Extender Board Logic

    $65.00
    Was: $125.00
    Extender Board Logic PCB Module Assy 114473-001 Rev B Logic Analyzer CardThis is an Extender Board Logic PCB module, Assembly 114473-001, Revision B. PCB extender boards like this one are passive...
    40094
    SKU:
    40094
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Unbranded
    Model:
    114473-001
    MPN:
    114473-001
    Type:
    PCB Extender Board
    SKU:
    40094
    Revision:
    Rev B
    Assembly Number:
    Assy 114473-001
    Form Factor:
    Card / Module
    Connector Type:
    Gold-finger edge connector; blue card-edge connector
    PCB Color:
    Green
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Extender board only; no additional accessories included.
    Condition Notes:
    Extender Board Logic 114473-001 Rev B PCB module. Inspected and in good used condition. PCB clean and intact; gold-finger and blue card-edge connectors show no damage or corrosion.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Cylix DB25-PARLL isolated loop data line surge protector — top/front view showing DB25 female connector and green ground wire with spade lug Cylix DB25-PARLL data line surge protector — reverse side showing DB25 male connector and UL listing label on housing

    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All Pins

    Cylix

    $24.80
    Was: $50.00
    Cylix DB25-PARLL Isolated Loop DB25 Data Line Surge Protector All PinsInline surge and transient protection device for DB25 parallel and RS-232 serial data connections. Protects all 25 pins using...
    39868
    SKU:
    39868
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Cylix
    Model:
    DB25-PARLL
    MPN:
    DB25-PARLL
    Type:
    Isolated Loop Data Line Surge Protector
    SKU:
    39868
    Connector Type:
    DB25 (25-Pin D-Sub)
    Pin Protection:
    All 25 Pins
    Protection Type:
    Isolated Loop / Surge & Transient
    Interface:
    DB25 Parallel / RS-232 Serial
    Ground Connection:
    Earth Ground Wire (Green, Spade Lug)
    UL Listed:
    Yes
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes ground wire with spade lug connector. Unit only — no additional accessories.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Inline / Pass-Through
    Condition Notes:
    Cylix DB25-PARLL Isolated Loop Surge Protector inspected and in good condition. Housing intact, DB25 connectors clean, ground wire present. Minor normal surface wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $24.80
    Was: $50.00
  • APC PSP25 ProtectNet Serial Parallel Port Surge Protector — front view showing DB25 male connector and red retention screws APC PSP25 ProtectNet Serial Parallel Port Surge Protector — rear view showing DB25 female connector port side

    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 Lines

    APC

    $11.90
    Was: $25.00
    APC PSP25 ProtectNet Serial Parallel Port Surge Protector DB25 All 25 LinesThe APC PSP25 ProtectNet is an inline isolated loop circuit protector designed to safeguard serial and parallel port data...
    39867
    SKU:
    39867
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    APC
    Model:
    PSP25
    MPN:
    PSP25
    Type:
    Serial/Parallel Port Surge Protector
    SKU:
    39867
    Connector Type:
    DB25 (25-pin) Male to Female
    Number of Lines Protected:
    25
    Protection Type:
    Isolated Loop Circuit Protection
    Compatible With:
    Serial and Parallel port devices, DB25 interfaces
    Certifications:
    UL Listed (13KA)
    Country/Region of Manufacture:
    China
    Form Factor:
    Inline Adapter
    Seller Notes:
    Unit only — no packaging or accessories.
    Condition:
    Used – Inspected
    Condition Notes:
    APC PSP25 ProtectNet Serial/Parallel Port Surge Protector. Inspected and in good used condition. Housing shows minor surface scuffing; DB25 connectors clean and intact, retention screws present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $11.90
    Was: $25.00
  • Sony ANL-42 1-689-131-11 PCB card front view showing components, ICs, and rating markings 4A 125V Sony ANL-42 circuit board rear/solder side view showing PCB traces and connector pads

    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board Module

    Sony

    $20.00
    Was: $40.00
    Sony ANL-42 1-689-131-11 PCB Card 4A 125V Internal Circuit Board ModuleInternal circuit board card designed for Sony industrial and telecom equipment. This PCB module handles power distribution and...
    39827
    SKU:
    39827
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Sony
    Model:
    ANL-42
    MPN:
    1-689-131-11
    Type:
    Internal PCB Circuit Board Card
    SKU:
    39827
    Voltage Rating:
    125V
    Current Rating:
    4A
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Card / Module
    Certifications:
    UL (mark visible on board)
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Board only; no enclosure or cables included.
    Condition Notes:
    Sony ANL-42 1-689-131-11 PCB card inspected and in good used condition. No visible damage, burnt components, or broken traces. Pulled from equipment. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Filter Concepts 3E20-F 3X20A EMI filter in open cardboard box, angled view showing screw terminal side Filter Concepts 3E20-F EMI filter in open cardboard box, opposite angled view showing screw terminals

    Filter Concepts 3E20-F 3X20A EMI Filter 250/440VAC 50/60Hz Three Phase

    Filter Concepts

    $85.00
    Was: $175.00
    Filter Concepts 3E20-F 3X20A EMI Filter 250/440VAC 50/60Hz Three PhaseThe Filter Concepts 3E20-F is a three-phase EMI (electromagnetic interference) line filter rated at 20 amps per phase. It is...
    39159
    SKU:
    39159
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Filter Concepts
    Model:
    3E20-F
    MPN:
    3E20 F
    Type:
    Three-Phase EMI / RFI Line Filter
    SKU:
    39159
    Voltage Rating:
    250/440VAC
    Current Rating:
    20A per phase (3x20A)
    Phase:
    Three Phase
    Frequency:
    50/60Hz
    Number of Phases:
    3
    Connector / Termination Type:
    Screw terminals (N, A, B, C)
    Certifications:
    UL Listed, CSA Listed
    Date Code:
    9744 / 7143
    Seller Notes:
    New open-box unit in original cardboard packaging.
    Country/Region of Manufacture:
    United States
    Condition:
    New – Open Box
    Condition Notes:
    Filter Concepts 3E20-F 3X20A EMI Filter. New and unused; original cardboard packaging shows storage wear but unit is uninstalled and in new condition. Screw terminals clean and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $85.00
    Was: $175.00
  • MSA 96104 Cell Assembly front-left view showing dual vertical flow tubes, multi-conductor wiring harness, and BNC-style gas port connector MSA 96104 Cell Assembly rear view showing label with installation instructions and part number, plus wiring harness exit

    MSA 96104 Cell Assembly Battery Reference Voltage Source SPC 083 REV 0 Gas

    MSA

    $50.00
    Was: $100.00
    MSA 96104 Cell Assembly Battery Reference Voltage Source SPC 083 REV 0 Gas DetectorReference voltage source cell assembly for MSA gas detection instruments. Provides calibration and functional...
    38871
    SKU:
    38871
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    MSA
    Model:
    96104
    MPN:
    96104
    Secondary Model:
    SPC 083 REV 0
    Type:
    Cell Assembly / Battery Reference Voltage Source
    SKU:
    38871
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. Includes dual flow tubes, multi-conductor wiring harness, and BNC-style gas port connector.
    Document Reference:
    SPC 083 REV 0 / Part No. 469022
    Application:
    MSA Gas Detection Instrument Reference Cell
    Included Accessories:
    Dual vertical flow tubes, multi-conductor harness, BNC-type gas fitting
    Form Factor:
    Freestanding Module / Bench Component
    Country/Region of Manufacture:
    United States
    Condition Notes:
    MSA 96104 Cell Assembly sold as-is for parts or repair. Appears complete with flow tubes, wiring harness, and gas connector present. Not tested, not guaranteed functional. Age-related wear visible. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $50.00
    Was: $100.00
  • SMT I1316 891 RF coaxial isolator angled top view showing model label and SMA connectors on two sides SMT I1316 891 RF coaxial isolator front view showing model number label and two SMA female ports labeled 1 and 2

    SMT I1316 891 RF Coaxial Isolator SMA Connector Microwave Component ICY63

    SMT

    $35.00
    Was: $70.00
    SMT I1316 891 RF Coaxial Isolator SMA Connector Microwave Component ICY63RF coaxial isolator for microwave and RF systems. Provides isolation between connected components to prevent signal...
    38753
    SKU:
    38753
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMT
    Model:
    I1316
    MPN:
    I1316
    Secondary Model:
    891
    Type:
    RF Coaxial Isolator
    SKU:
    38753
    Connector Type:
    SMA (Female)
    Number of Ports:
    3
    Housing:
    Machined Metal, Nickel-Plated
    Country/Region of Manufacture:
    United States
    Form Factor:
    Inline / Drop-In
    Seller Notes:
    Unit only. No additional accessories included.
    Condition:
    Used – Inspected and Pulled from Working Environment
    Compatible With:
    SMA-based RF/microwave systems and test setups
    Condition Notes:
    SMT I1316 / 891 RF coaxial isolator. Inspected and in good used condition. Housing shows light wear and minor oxidation. All three SMA connectors appear intact and undamaged.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Philips Semiconductors MACH-III Minimodule Advanced Carrier Hardware — top view showing LCD display, SMA connectors, FPGA array, and pin headers Philips Semiconductors MACH-III carrier board — angled side view showing DB9 serial connector, edge connectors, and component layout

    Philips Semiconductors MACH-III Minimodule Advanced Carrier Hardware Dev Board

    Philips Semiconductors

    $225.00
    Was: $450.00
    Philips Semiconductors MACH-III Minimodule Advanced Carrier Hardware Dev BoardDevelopment board for the Philips MACH-III Minimodule system, featuring an integrated LCD display and multiple...
    38714
    SKU:
    38714
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    Philips Semiconductors
    Model:
    MACH-III
    MPN:
    MACH-III Minimodule Advanced Carrier Hardware
    Type:
    Minimodule Advanced Carrier Hardware Development Board
    SKU:
    38714
    Condition:
    Used – Inspected
    Seller Notes:
    Board only; no additional accessories confirmed included
    Country/Region of Manufacture:
    Netherlands
    Form Factor:
    PCB / Development Board
    Display:
    Integrated LCD module
    Connector Types:
    SMA (RF), DB9 (serial), SCSI-style edge connectors, pin headers
    Interface Type:
    SMA RF, DB9 Serial, GPIO Headers, Edge Connectors
    Application:
    Embedded / Semiconductor Development and Evaluation
    Year / Copyright Date:
    2006
    Compatible With:
    Philips Semiconductors MACH-III Minimodule systems
    PCB Color:
    Green
    Notable Components:
    FPGA array, LCD display, SMA connectors, Philips IC
    Condition Notes:
    Philips Semiconductors MACH-III Minimodule Advanced Carrier Hardware dev board. Inspected, in good used condition. PCB clean, LCD and connectors intact, light handling wear. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $225.00
    Was: $450.00
  • Rucker & Kolls 9644 PICO DAS DEV 2 circular IC test socket in clear plastic clamshell case — top view with label showing Part No. 9644, PICO DAS DEV 2, Made in USA Rucker & Kolls 9644 PICO DAS DEV 2 circular IC test socket removed from clamshell case showing gold-plated radial contact pins on PCB — label visible beside unit

    Rucker & Kolls 9644 PICO DAS DEV 2 Circular IC Test Socket DAS Devices PCB

    Rucker & Kolls

    $75.00
    Was: $150.00
    Rucker & Kolls 9644 PICO DAS DEV 2 Circular IC Test Socket DAS Devices PCBCircular IC test socket and DAS device interface board manufactured by Rucker & Kolls. Designed for semiconductor package...
    36621
    SKU:
    36621
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Rucker & Kolls
    Model:
    PICO DAS DEV 2
    MPN:
    9644
    Type:
    Circular IC Test Socket / DAS Device Interface Board
    SKU:
    36621
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected and in Good Condition
    Form Factor:
    Circular PCB / Disk
    Customer:
    DAS Devices
    Item Number:
    02
    R&K Sales Order:
    9644
    Quantity:
    01
    Manufacturer Address:
    1064 Yosemite Drive, Milpitas, CA 95035
    Application / Use Case:
    IC package testing, DAS device interface, semiconductor test
    Seller Notes:
    Includes original clear plastic clamshell storage case. Made in the USA.
    Condition Notes:
    Rucker & Kolls 9644 PICO DAS DEV 2 circular IC test socket. Inspected and in good used condition. Gold-plated pins appear intact. Includes original clear plastic clamshell case.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Hybricon 078-360 Reference Board Test Module – front and top angled view showing card cage opening with DB-style edge connectors and beige chassis Hybricon 078-360 Reference Board Test Module – rear panel view showing IEC AC power inlet, label area, and attached SMA RF coaxial pigtail cable

    Hybricon 078-360 Reference Board Test Module VME Chassis Card Cage Assembly

    Hybricon

    $149.00
    Was: $300.00
    Hybricon 078-360 Reference Board Test Module VME Chassis Card Cage AssemblyThe Hybricon 078-360 is a reference board and test module housed in a compact benchtop card cage chassis. It features an...
    36237
    SKU:
    36237
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    18.00 LBS
    Brand:
    Hybricon
    Model:
    078-360
    MPN:
    078-360
    Type:
    Reference Board / Test Module
    SKU:
    36237
    Form Factor:
    Benchtop Chassis / Card Cage
    Interface Type:
    VME / Internal RF (SMA)
    Connector Type:
    SMA, DB-style edge connectors
    Condition:
    Used – Inspected, Not Bench-Tested
    Seller Notes:
    Includes attached SMA RF coaxial pigtail cable
    Application / Use Case:
    VME-bus reference and test, RF/embedded system dev
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Hybricon 078-360 Reference Board Test Module. Visually inspected, good cosmetic condition. Internal RF assembly and SMA cable intact. Not bench-tested; sold as-inspected with no functional guarantee.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $149.00
    Was: $300.00
  • JW Miller Magnetics 4551 RF choke assembly — front three-quarter view showing four-section wire-wound coil on ceramic bobbin with metal mounting brackets JW Miller Magnetics 4551 inductor choke assembly — side view showing coil windings and bracket configuration

    JW Miller Magnetics 4551 RF Choke Assembly Inductor Coil Electronic Component

    JW Miller Magnetics

    $14.00
    Was: $30.00
    JW Miller Magnetics 4551 RF Choke Assembly Inductor Coil Electronic ComponentThe JW Miller Magnetics 4551 is a wire-wound RF choke assembly manufactured by J.W. Miller Magnetics, a division of Bell...
    35952
    SKU:
    35952
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    JW Miller Magnetics
    Model:
    4551
    MPN:
    4551
    Type:
    RF Choke Assembly / Inductor Coil
    SKU:
    35952
    Seller Notes:
    New open-box surplus; coil and mounting brackets included
    Country/Region of Manufacture:
    United States
    Component Type:
    Wire-Wound RF Choke / Inductor
    Core Material:
    Ceramic
    Mounting Style:
    Bracket Mount
    Number of Coil Sections:
    4
    Lot Date Code:
    9637
    Manufacturer Division:
    A Division of Bell Industries, Inc.
    Form Factor:
    Through-Hole / Bracket Mount Assembly
    Condition:
    New – Open Box
    Condition Notes:
    JW Miller Magnetics 4551 RF Choke Assembly — new old stock, unused. May be out of original packaging but the component is in new condition. Lot date code 9637.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $14.00
    Was: $30.00
  • E.F. Johnson Company electronic components box labeled 23-2569-003, Waseca Minnesota USA EF Johnson 23-2569-003 duplex filter beside its original white cardboard box

    EF Johnson 23-2569-003 Duplex Filter RF Electronic Component Waseca MN

    EF Johnson

    $35.00
    Was: $70.00
    EF Johnson 23-2569-003 Duplex Filter RF Electronic Component Waseca MNThe EF Johnson 23-2569-003 is a duplex filter — an RF passive component designed to allow two signals to share a common antenna...
    35942
    SKU:
    35942
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    E.F. Johnson
    Model:
    23-2569-003
    MPN:
    23-2569-003
    Type:
    Duplex Filter
    SKU:
    35942
    Seller Notes:
    New old stock in original E.F. Johnson Company box with wire leads.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Standalone / Component Module
    Application:
    RF Signal Filtering / Duplexing
    Connector / Termination:
    Wire leads (2)
    Housing / Enclosure:
    Metal can / shielded enclosure
    Condition:
    New Old Stock — unused, in original box
    Condition Notes:
    EF Johnson 23-2569-003 Duplex Filter — new old stock, unused component in original box. Box shows age/shelf wear; filter itself appears unused and undamaged. Wire leads intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • ITT Electron Technology F-145 ceramic hydrogen thyratron tube – side view showing white ceramic body and metal base with pins ITT F-145 ceramic thyratron tube – angled side view showing anode cap on top and three-pin metal base

    ITT Electron Technology F-145 Ceramic Hydrogen Thyratron Tube Radar Laser

    ITT Electron Technology

    $250.00
    Was: $500.00
    ITT Electron Technology F-145 Ceramic Hydrogen Thyratron Tube Radar LaserA ceramic hydrogen thyratron tube designed for high-voltage pulse switching applications. This tube operates as a controlled...
    35873
    SKU:
    35873
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    ITT Electron Technology Division
    Model:
    F-145
    MPN:
    F-145
    Type:
    Ceramic Hydrogen Thyratron Tube
    SKU:
    35873
    Condition:
    Used – Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Tube Type:
    Hydrogen Thyratron
    Envelope Material:
    Ceramic
    Application:
    Radar, Linear Particle Accelerators, High-Energy Lasers
    Date Code:
    9143
    Seller Notes:
    Tube only, as pictured. Pulled from a working environment.
    Form Factor:
    Cylindrical Tube
    Pin Configuration:
    3-pin base with anode cap
    Condition Notes:
    ITT Electron Technology F-145 ceramic hydrogen thyratron tube. Inspected and in good condition. Pulled from a working environment where it was in use. Ceramic body clean, pins and anode cap intact. Date code 9143 visible.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • Full lot of nine NEC NEAX 2400 ICS IMX IPX PBX manual binders arranged on a table, showing all volumes NEC NEAX 2400 ICS ISDN System Data Design Manual binder, ND-46334(E), Stock 200765, published by NEC America Inc.

    NEC NEAX 2400 ICS IMX IPX PBX Programming Installation Manual Set Lot

    NEC

    $100.00
    Was: $200.00
    NEC NEAX 2400 ICS IMX IPX PBX Programming Installation Manual Set LotComplete documentation set for the NEC NEAX 2400 PBX system covering three platform variants. Nine printed binders containing...
    35599
    SKU:
    35599
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    48.00 LBS
    Brand:
    NEC
    Model:
    NEAX 2400
    MPN:
    NEAX 2400 ICS/IMX/IPX
    Type:
    PBX System Manual Set
    SKU:
    35599
    Condition:
    Used – Inspected and in Good Condition
    For Make/Model:
    NEC NEAX 2400 ICS, IMX, IPX
    Document Type:
    Programming, Installation, Circuit Card, System Manual
    Language:
    English
    Format:
    Printed, Ring Binder
    Number of Volumes:
    9
    Manuals Included:
    ICS ISDN System Data Design, ICS Circuit Card
    Manuals Included 2:
    IMX Feature Programming, IMX DRU System
    Manuals Included 3:
    IPX Feature Programming, IPX Installation
    Manuals Included 4:
    IPX Circuit Card, IPX Fusion Network System
    Compatible With:
    NEC NEAX 2400 ICS PBX System
    Compatible With 2:
    NEC NEAX 2400 IMX PBX System
    Compatible With 3:
    NEC NEAX 2400 IPX PBX System
    Publication Numbers:
    ND-46334(E) Stock#200765 (ICS ISDN Design)
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Lot of 9 NEC NEAX 2400 binder manuals covering ICS, IMX, and IPX platforms.
    Condition Notes:
    NEC NEAX 2400 ICS/IMX/IPX PBX manual set (9 binders) inspected and in good used condition. All volumes present, pages complete and legible, normal shelf wear. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00