Electronic Components and Parts
-
BZT52C30 30V 500mW Zener Diode SOD-123 SMD SMT Small Signal Lot of 20
Name Brand
$8.00Was: $15.00BZT52C30 30V 500mW Zener Diode SOD-123 SMD SMT Small Signal Lot of 20The BZT52C30 is a 30V small signal zener diode in SOD-123 surface mount package. Zener diodes regulate voltage and protect...35130- SKU:
- 35130
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 0.50 LBS
- Brand:
- Unbranded
- Model:
- BZT52C30
- MPN:
- BZT52C30
- Type:
- Zener Diode
- SKU:
- 35130
- Package / Case:
- SOD-123
- Mounting Type:
- Surface Mount (SMD/SMT)
- Zener Voltage (Nominal):
- 30V
- Zener Voltage Range:
- 28V Min, 30V Nom, 32V Max
- Power Dissipation:
- 500mW
- Diode Type:
- Small Signal Zener
- Quantity:
- 20 Units
- Condition:
- New
- Seller Notes:
- Pack of 20 new units cut from a larger reel
- Country/Region of Manufacture:
- China
- Condition Notes:
- BZT52C30 30V 500mW Zener diodes are new and unused, cut from a larger reel belonging to a retired engineer. Sold in lots of 20. Never used or installed.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$8.00Was: $15.00 -
DF04S Bridge Rectifier 400V 1A SMD Glass Passivated Diode Pack of 20
Unknown
$7.00Was: $15.00DF04S Bridge Rectifier 400V 1A SMD Glass Passivated Diode Pack of 20Surface-mount bridge rectifier for single-phase full-wave AC-to-DC conversion. Glass passivated construction rated for 400V peak...35126- SKU:
- 35126
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Unbranded
- Model:
- DF04S
- MPN:
- DF04S
- Type:
- Bridge Rectifier
- SKU:
- 35126
- Quantity:
- 20 pieces per lot (sold in strip of 20)
- Package / Case:
- SOP-4 / SMD Surface Mount
- Peak Reverse Voltage:
- 400V
- Average Rectified Current:
- 1A
- Non-Repetitive Surge Current:
- 50A (8.3ms half-sine)
- Junction Type:
- Glass Passivated
- Body Dimensions:
- 0.33 x 0.25 x 0.1 inches
- Mounting Type:
- Surface Mount (SMD)
- Configuration:
- Single-Phase Full-Wave Bridge
- Condition:
- New – Open Box
- Seller Notes:
- Sold in strips of 20 pieces. New but may be out of original manufacturer box.
- Application:
- Low-power DC power supply rectification
- Condition Notes:
- DF04S SMD bridge rectifiers, pack of 20. New and unused, may be out of original manufacturer box. Sold in strips of 20. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$7.00Was: $15.00 -
Analog Devices 31-710009-001 Analog Board AD7506JN Rev X9 ADC Module
Analog Devices
$55.00Was: $100.00Analog Devices 31-710009-001 Analog Board AD7506JN Rev X9 ADC ModuleThe Analog Devices 31-710009-001 is a multi-chip analog signal-conditioning and multiplexing board designed as a subassembly for...34455- SKU:
- 34455
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Analog Devices
- Model:
- 31-710009-001
- MPN:
- 31-710009-001
- Secondary Model:
- ASSY 31-710009-001
- Type:
- Analog Signal Board / PCB Module
- SKU:
- 34455
- Revision:
- Rev X9
- Main IC / Chipset:
- AD7506JN (16-Channel Analog Multiplexer)
- Form Factor:
- Card / Module (card-cage / VME-style bracket)
- Condition:
- Open Box – New, unused, may be out of original packaging
- Seller Notes:
- Board only; no additional accessories observed in photos.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Analog Devices 31-710009-001 Analog Board. New, unused open-box surplus — out of original packaging but uninstalled and in excellent condition. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$55.00Was: $100.00 -
Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 1976 Vintage PCB
Intel
$40.00Was: $80.00Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 1976 Vintage PCBThis is a vintage Intel Display Driver Board built around the Intel P8279-5 keyboard and display controller IC, dated 1976. The...34453- SKU:
- 34453
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Intel
- Model:
- P8279-5
- MPN:
- 31-710011-001
- Secondary Model:
- 31-710011-00
- Type:
- Display Driver Board / Keyboard-Display Controller PCB
- SKU:
- 34453
- Chipset / Main IC:
- Intel P8279-5 (8279 Keyboard/Display Controller)
- Board Revision:
- Rev X1
- Date Code / Year:
- 1976
- Assembly Number:
- 01238
- Form Factor:
- Bare PCB / Card Module
- Condition:
- Used – Inspected and Pulled from Working Environment
- Seller Notes:
- Board only; no chassis or enclosure included.
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Intel P8279-5 Display Driver Board 31-710011-001 Rev X1 (1976) has been inspected and is in good condition. Board is intact, all ICs present. Normal aging for a 1976-era PCB. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$40.00Was: $80.00 -
Steel Enclosure RF Equalizer FREQ MHz Boost dB Diff BNC 5x4x3 w/ Power Supply
Steel Enclosure
$75.00Was: $150.00Steel Enclosure RF Equalizer FREQ MHz Boost dB Diff BNC 5x4x3 w/ Power SupplyThis is a custom-built steel enclosure measuring approximately 5x4x3 inches housing a self-contained RF equalizer circuit...33057- SKU:
- 33057
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 4.00 LBS
- Brand:
- Unbranded
- Model:
- Steel Enclosure RF Equalizer 5x4x3
- Type:
- RF Equalizer / IC Test Fixture Enclosure
- SKU:
- 33057
- Condition:
- As-Is / For Parts or Not Working
- Enclosure Dimensions:
- 5 x 4 x 3 inches
- Enclosure Material:
- Steel
- Controls:
- Freq. MHz dial, Boost dB 10-turn pot, DIFF switch
- Front Panel Connectors:
- 4x BNC (differential inputs)
- Side Connectors:
- BNC output, 4-pin circular connector
- Rear Panel:
- IEC AC inlet, fuse holder, power indicator LED
- Internal Power Supply Brand:
- Computer Products / Boschert
- Internal Power Supply Model:
- HM530
- PSU Output Voltage:
- 5V DC
- PSU Output Current:
- 3000 mA (3A)
- PSU Input Voltage:
- 115 VAC
- PSU Input Frequency:
- 50/400 Hz
- PSU Input Current:
- 320 mA
- Line Filter Brand:
- Corcom
- Seller Notes:
- Sold for parts. Includes internal power supply, opto coupler, IC test fixture, 10-turn potentiometers, and line filter.
- Form Factor:
- Benchtop / Desktop Enclosure
- Condition Notes:
- Unbranded steel enclosure RF equalizer (5x4x3) sold AS-IS for parts. Cosmetically good; all internal components present (HM530 PSU, opto coupler, IC test fixture, line filter, potentiometers). Not tested. No functionality guarantee.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$75.00Was: $150.00 -
20 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Hand-Built PCB Card
Bessel
$30.00Was: $60.0020 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Hand-Built PCB CardThis is a hand-built 5-pole Bessel low pass filter with a 20 MHz cutoff frequency, constructed on a copper-clad PCB card. The...33023- SKU:
- 33023
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 20 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 20 MHz
- Input Impedance:
- 50 Ohms
- Output Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Form Factor:
- PCB Card / Module
- Construction:
- Hand-built on copper-clad PCB
- SKU:
- 33023
- Condition:
- Used – Inspected and in good condition
- Seller Notes:
- Filter card only — no enclosure or additional accessories included.
- Condition Notes:
- 20 MHz 5-pole Bessel low pass filter PCB card. Inspected and in good used condition. BNC connectors intact, all components present, no visible damage. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
9.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$35.00Was: $70.009.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 9.5 MHz 5-pole Bessel low pass filter in a rugged metal enclosure, with 50-ohm impedance on both the input...33021- SKU:
- 33021
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 9.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 9.5 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Filter Topology:
- Low Pass
- Form Factor:
- Enclosed / Benchtop Module
- Enclosure Material:
- Metal
- Condition:
- Used – Pulled from Working Environment
- SKU:
- 33021
- Seller Notes:
- Unit only; no additional accessories included.
- Condition Notes:
- 9.5 MHz 5-pole Bessel low pass filter in good used condition. Enclosure shows light surface wear; BNC connectors intact. Label present and legible. Pulled from working environment.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$35.00Was: $70.00 -
9.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$28.00Was: $60.009.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalBenchtop low pass filter designed to attenuate high-frequency signals above 9.0 MHz while preserving lower frequencies...33020- SKU:
- 33020
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 9.0 MHz 5-Pole Bessel Low Pass Filter
- MPN:
- 15
- Type:
- Bessel Low Pass Filter
- SKU:
- 33020
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only; no cables or accessories included.
- Form Factor:
- Enclosed / Benchtop
- Filter Type:
- Bessel Low Pass
- Number of Poles:
- 5
- Cutoff Frequency:
- 9.0 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Input Connector:
- BNC
- Output Connector:
- BNC
- Frequency Range:
- Low Pass, cutoff 9.0 MHz
- Enclosure Material:
- Metal (painted steel/aluminum)
- Application:
- RF Signal Conditioning, Test & Measurement
- Condition Notes:
- 9.0 MHz 5-Pole Bessel Low Pass Filter inspected and in good used condition. Metal enclosure shows light surface wear; BNC connectors clean and undamaged. Spec label intact and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
8.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$65.00Was: $125.008.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a passive 8.0 MHz Bessel low pass filter configured in a 5-pole topology with a 50-ohm input and output impedance...33018- SKU:
- 33018
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 8.0 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 8.0 MHz
- Impedance:
- 50 Ohm
- Connector Type:
- BNC
- Filter Response:
- Low Pass
- Enclosure:
- Yes — metal housing with mounting flanges
- Input Connector:
- BNC (female)
- Output Connector:
- BNC (female)
- SKU:
- 33018
- Condition:
- Used – Inspected
- Seller Notes:
- Unit only — no additional accessories included.
- Condition Notes:
- This 8.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good used condition. Metal enclosure shows light surface wear; both BNC connectors appear clean and undamaged. Label intact and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$65.00Was: $125.00 -
7.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF Signal
Bessel
$28.00Was: $60.007.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Housed RF SignalThis is a 5-pole Bessel low pass filter with a 7.5 MHz cutoff frequency, designed for RF signal conditioning in 50-ohm systems...33017- SKU:
- 33017
- Availability:
- Usually ships within 1–2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 7.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Low Pass Filter
- Filter Type:
- Bessel
- Number of Poles:
- 5
- Cutoff Frequency:
- 7.5 MHz
- Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Input Connector:
- BNC Female
- Output Connector:
- BNC Female
- Filter Response:
- Bessel (Maximally Flat Group Delay)
- Pass Type:
- Low Pass
- Form Factor:
- Housed / Benchtop Module
- Housing:
- Metal enclosure with mounting flanges
- SKU:
- 33017
- Condition:
- Used – Inspected
- Seller Notes:
- Filter only — no additional cables or accessories included.
- Condition Notes:
- This 7.5 MHz 5-pole Bessel low pass filter has been inspected and is in good used condition. Housing shows light scuffing; BNC connectors are clean and intact. Label is present and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
6.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$28.00Was: $60.006.0 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalA 5-pole Bessel low pass filter designed to attenuate RF signals above 6.0 MHz while maintaining a flat passband response...33007- SKU:
- 33007
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 6.0 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Bessel Low Pass Filter
- SKU:
- 33007
- Condition:
- Used – Inspected
- Cutoff Frequency:
- 6.0 MHz
- Filter Type:
- Bessel
- Filter Topology:
- Low Pass
- Number of Poles:
- 5
- Input Impedance:
- 50 Ohms
- Output Impedance:
- 50 Ohms
- Connector Type:
- BNC
- Form Factor:
- Enclosed / Benchtop
- Enclosure Material:
- Metal
- Seller Notes:
- Includes filter unit in metal enclosure with BNC IN and BNC OUT connectors.
- Condition Notes:
- This 6.0 MHz 5-Pole Bessel Low Pass Filter has been inspected and is in good condition. Metal enclosure shows light surface wear. Both BNC connectors are intact with no corrosion. Label is clean and legible.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$28.00Was: $60.00 -
6.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF Signal
Bessel
$30.00Was: $60.006.5 MHz 5-Pole Bessel Low Pass Filter 50 Ohm BNC In/Out Enclosure RF SignalThis is a 5-pole Bessel low-pass filter designed to attenuate frequencies above 6.5 MHz while passing lower frequencies with...32942- SKU:
- 32942
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 6.5 MHz 5-Pole Bessel Low Pass Filter
- Type:
- Bessel Low Pass Filter
- SKU:
- 32942
- Condition:
- Used – Inspected
- Filter Type:
- Bessel
- Response:
- Low Pass
- Cutoff Frequency:
- 6.5 MHz
- Number of Poles:
- 5
- Impedance:
- 50 Ohm
- Connector Type:
- BNC (female panel-mount, IN and OUT)
- Form Factor:
- Enclosed / Benchtop
- Enclosure Material:
- Metal (blue painted aluminum)
- Seller Notes:
- Filter only; no additional accessories included.
- Condition Notes:
- This 6.5 MHz 5-pole Bessel low-pass filter has been inspected and is in good used condition. The enclosure shows light wear; both BNC connectors are clean and undamaged. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$30.00Was: $60.00 -
Sam Yuk FUL6D/U/4 U-Shape Fluorescent Light Bulb Tube 2-Pin 4.5" Wide
SAM YUK
$6.00Was: $12.50Sam Yuk FUL6D/U/4 U-Shape Fluorescent Light Bulb Tube 2-Pin 4.5" WideThis is a U-shaped fluorescent tube lamp with a 2-pin base configuration. It operates as a compact light source for enclosed...32922- SKU:
- 32922
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Sam Yuk
- Model:
- FUL6D/U/4
- MPN:
- FUL6D/U/4
- Type:
- U-Shape Fluorescent Lamp Tube
- SKU:
- 32922
- Base Type:
- 2-Pin
- Bulb Shape:
- U-Shape / U-Bend
- Width:
- 4.5 inches
- Height:
- 3 inches
- Condition:
- New – Open Box
- Seller Notes:
- New open-box fluorescent tube; may lack original retail packaging.
- Country/Region of Manufacture:
- South Korea
- Condition Notes:
- Sam Yuk FUL6D/U/4 U-Shape Fluorescent Tube. New and unused, open-box stock. May be out of original packaging or stored long-term. Tube appears clean and undamaged. Contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$6.00Was: $12.50 -
Allen-Bradley RCR07G684JS 680K Ohm 1/4W Carbon Comp Resistor 5% Lot 700
Allen-Bradley
$110.00Was: $225.00Allen-Bradley RCR07G684JS 680K Ohm 1/4W Carbon Comp Resistor 5% Lot 700Carbon composition resistor rated at 680,000 ohms with 1/4 watt power handling and 5% tolerance. Through-hole axial lead...32897- SKU:
- 32897
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Allen-Bradley
- Model:
- RCR07G684JS
- MPN:
- RCR07G684JS
- Type:
- Carbon Composition Resistor
- SKU:
- 32897
- Resistance:
- 680K Ohm (680,000 Ohms)
- Power Rating:
- 1/4 Watt (0.25W)
- Tolerance:
- 5%
- Resistor Series:
- RCR07
- Quantity:
- 700 units (open box of 1000)
- Mounting Type:
- Through-Hole (Axial Lead)
- Specification:
- JAN (Joint Army-Navy / MIL-spec)
- Code:
- 01121
- Color Code:
- Code 4245
- Seller Notes:
- Open box of ~700 units; exterior box has rust on one side, resistors are fine
- Country/Region of Manufacture:
- United States
- Condition Notes:
- Allen-Bradley RCR07G684JS 680K Ohm 1/4W resistors, open box of ~700 units. Box exterior has rust on one side; resistors are in fine, unused condition. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$110.00Was: $225.00 -
General DataComm GDC 208A Dual 208 Multiplexer Rackmount with Cards Modules
General DataComm
$100.00Was: $200.00General DataComm GDC 208A Dual 208 Multiplexer Rackmount with Cards ModulesDual-channel 208A/208B rackmount multiplexer and data set chassis manufactured by General DataComm. Supports multiple...32820- SKU:
- 32820
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 34.00 LBS
- Brand:
- General DataComm
- Model:
- GDC 208A
- MPN:
- GDC-050-D-051-001
- Secondary Model:
- Dual 208
- Type:
- Rackmount Multiplexer / Data Set Chassis
- SKU:
- 32820
- Condition:
- Used – Inspected and in Good Condition
- Seller Notes:
- Includes multiple installed data-set/modem cards (Cards 1–8 visible)
- Country/Region of Manufacture:
- United States
- Form Factor:
- Rackmount
- Power Requirements:
- 117VAC 50/60Hz 1A
- Fuse Type:
- NFPA Type II; Fuse Type 3AB 250V
- Interface Type:
- CUST INT (Customer Interface), TEL INT (Telephone Interface)
- Connector Type:
- DB-25 (Customer Interface), DB-25 (Telephone Interface)
- Number of Card Slots:
- 8
- Cards Installed:
- Multiple data-set/modem cards installed (Cards 1–8)
- Channel Configuration:
- Dual 208A / 208B
- Indicators:
- ON, TR, MR, RS, CS, CO, ER, DL, LP, AL, ST, RO, RT, 50
- Manufacturer Location:
- Danbury, Connecticut
- Condition Notes:
- General DataComm GDC 208A Dual 208 rackmount multiplexer. Inspected and in good used condition. Chassis intact, Cards 1–8 installed, interface connectors present. Normal cosmetic wear from prior rack use.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$100.00Was: $200.00 -
TBA 2800 IR Receiver Module Remote Control Infrared Demodulator IC PCB BPW41
TBA
$18.00Was: $40.00TBA 2800 IR Receiver Module Remote Control Infrared Demodulator IC PCB BPW41Infrared receiver module designed for remote control applications. The TBA 2800 IC demodulates IR signals received by the...32342- SKU:
- 32342
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.95 LBS
- Brand:
- Unbranded
- Model:
- TBA 2800
- MPN:
- TBA 2800
- Type:
- Infrared Receiver Module
- SKU:
- 32342
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Includes receiver housing, PCB with ICs, and yellow wire harness connector
- Form Factor:
- PCB Module with Separate IR Housing
- Interface Type:
- Wire Harness / JST-style Connector
- Output Type:
- Positive and Negative Pulses
- Photodetector:
- BPW41 IR Photodiode
- Application:
- Remote Control Infrared Demodulation
- Signal Type:
- Infrared (IR)
- Pulse Polarity:
- Selectable: NEG or POS (switch on PCB)
- Compatible With:
- Remote control systems using TBA 2800 IR receiver IC
- Condition Notes:
- This TBA 2800 IR Receiver Module has been inspected and is in good used condition. Pulled from a working environment. Housing shows age-related paint wear. PCB and wire harness are intact. Please contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$18.00Was: $40.00 -
Honeywell HOA1881-13 Optoswitch Slotted Optical Sensor NPN IR LED 21in Pigtail
Honeywell
$12.00Was: $25.00Honeywell HOA1881-13 Optoswitch Slotted Optical Sensor NPN IR LED 21in PigtailA slotted optical sensor (photointerrupter) with NPN transistor output and integral IR LED. The sensor detects object...32158- SKU:
- 32158
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 0.40 LBS
- Brand:
- Honeywell
- Model:
- HOA1881-13
- MPN:
- HOA1881-13
- Type:
- Slotted Optoswitch / Optical Sensor
- SKU:
- 32158
- Output Type:
- Analog NPN Transistor
- Vceo Rating:
- >15V
- IR LED Current (Max):
- ~20 mA
- Cable / Lead Length:
- 21 Inches (Pigtail)
- Wire Colors:
- Brown (common/ground), Orange (collector)
- Mounting Style:
- Leaded / Through-Hole
- Process Compatibility:
- Leaded Process Compatible; Peak Reflow 260°C
- Sensor Style:
- Slotted (Transmissive) Photointerrupter
- Application:
- Industrial Automation, Position Sensing, Encoding
- Country/Region of Manufacture:
- Mexico
- Condition:
- Used – Pulled from Working Environment
- Seller Notes:
- Single sensor with 21-inch color-coded pigtail leads included
- Condition Notes:
- Honeywell HOA1881-13 optoswitch inspected and in good used condition. Pulled from a working environment. Sensor body intact; 21-inch pigtail leads show normal handling wear. Photos available.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$12.00Was: $25.00 -
Inko Industrial PE6-NC-AR-2-S Nitrocellulose AR Lens Filter 2.85 Micron Film
Inko Industrial
$95.00Was: $200.00Inko Industrial PE6-NC-AR-2-S Nitrocellulose AR Lens Filter 2.85 Micron FilmNitrocellulose anti-reflection optical lens filter with 2.85 micron film thickness. Designed for optical filtering and thin...31854- SKU:
- 31854
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 2.00 LBS
- Brand:
- Inko Industrial Corp
- Model:
- PE6-NC-AR-2-S
- MPN:
- PE6-NC-AR-2-S
- Type:
- Nitrocellulose Anti-Reflection Optical Lens Filter
- SKU:
- 31854
- Film Type:
- Nitrocellulose
- Coating Type:
- Anti-Reflection (AR)
- Film Thickness:
- 2.85 Micron
- Lot Number:
- 60718
- Date Code:
- 07-18-96
- Patent:
- US Patent #4,697,701
- Condition:
- Used – Inspected, Good Condition
- Seller Notes:
- Includes original plastic storage tray. Inspected and in good condition.
- Country/Region of Manufacture:
- United States
- Application:
- Optical filtering, thin film optics, scientific instrumentation
- Form Factor:
- Large circular optical element with mounting ring
- Condition Notes:
- Inko Industrial PE6-NC-AR-2-S nitrocellulose AR lens, 2.85 micron. Inspected and in good condition. AR coating intact, no visible chips or damage. Includes original storage tray. Please view photos and contact us with any questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$95.00Was: $200.00 -
Bussmann BM6033PQ 3-Pole Fuse Holder 30A 600V w/ Limitron KTK-5 Fuses
Bussman Cooper Industries
$25.00Was: $50.00Bussmann BM6033PQ 3-Pole Fuse Holder 30A 600V w/ Limitron KTK-5 FusesThe Bussmann BM6033PQ is a heavy-duty 3-pole fuse block rated for 30 amps at 600 volts, manufactured by Bussmann (Cooper...31730- SKU:
- 31730
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 1.00 LBS
- Brand:
- Bussmann
- Model:
- BM6033PQ
- MPN:
- BM6033PQ
- Type:
- 3-Pole Fuse Holder / Fuse Block
- SKU:
- 31730
- Seller Notes:
- Includes 3x Limitron KTK-5 fast-acting fuses installed
- Country/Region of Manufacture:
- United States
- Manufacturer:
- Bussmann / Cooper Industries
- Replaces:
- M60030-3PQ
- Number of Poles:
- 3
- Voltage Rating:
- 600V
- Current Rating:
- 30A
- Quick Connect Rating:
- 20A
- Wire Gauge:
- 10 AWG (CU Only)
- Torque Rating:
- 20 LB.IN
- Withstand Rating:
- 10,000A RMS Symmetrical
- Included Fuse Model:
- Limitron KTK-5
- Fuse Type:
- Fast-Acting / Current-Limiting
- Fuse Amperage:
- 5A
- Certifications:
- UL Listed, CSA
- Condition:
- Used – Pulled from Working Environment
- Condition Notes:
- Bussmann BM6033PQ 3-pole fuse holder in good used condition. Pulled from a working environment. Includes 3x Limitron KTK-5 fuses. Normal wear from previous installation.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00 -
Rack Unit Extender Module 262303 Edge Card to 36-Pin Ribbon Cable AMP 380344-1
Rack Unit
$25.00Was: $50.00Rack Unit Extender Module 262303 Edge Card to 36-Pin Ribbon Cable AMP 380344-1This is a rack unit extender module (part number 262303) that provides an interface between a 36-pin edge card connector...31654- SKU:
- 31654
- Availability:
- Usually ships within 1-2 business days.
- Weight:
- 3.00 LBS
- Brand:
- Unbranded
- Model:
- 262303
- MPN:
- 262303
- Secondary Model:
- 7550
- Type:
- Rack Unit Extender Module
- Connector Type:
- Edge Card to 36-Pin Ribbon Cable
- Connector Part Number:
- AMP 380344-1
- Interface:
- Edge Card / Ribbon Cable
- Number of Pins:
- 36
- Form Factor:
- Card/Module
- Date Code:
- 8339
- SKU:
- 31654
- Condition:
- Used – Inspected and Tested
- Seller Notes:
- Includes ribbon cable harness with multiple connectors as shown.
- Condition Notes:
- Rack Unit Extender Module 262303 inspected and in good used condition. Edge card connector and ribbon cable harness intact, no broken or bent pins. Light surface wear. Please view photos and contact us with questions.
- California Prop 65 Warning:
- WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
$25.00Was: $50.00