SMC

SMC

  • SMC CDA1FN100-G0547-25 pneumatic cylinder front-right angle view showing flange mount and threaded rod end SMC CDA1FN100-G0547-25 pneumatic cylinder left-side view showing cylinder body label and push-in fittings

    SMC CDA1FN100-G0547-25 Pneumatic Cylinder 1.0MPa 145 PSI Linear Rod w/ Sensors

    SMC

    $22.70
    Was: $80.00
    SMC CDA1FN100-G0547-25 Pneumatic Cylinder 1.0MPa 145 PSI Linear Rod w/ Sensors SMC pneumatic cylinder with 100 mm bore and 25 mm stroke. Operates at 1.0 MPa (145 PSI). Includes two integrated...
    46293
    SKU:
    46293
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    19.00 LBS
    Brand:
    SMC
    Model:
    CDA1FN100-G0547-25
    MPN:
    CDA1FN100-G0547-25
    Type:
    Pneumatic Cylinder
    SKU:
    46293
    Series:
    CDA Series
    Cylinder Style:
    Linear Rod
    Max Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Bore Size:
    100 mm
    Actuator Type:
    Pneumatic
    Stroke:
    25 mm
    Position Sensors Included:
    Yes — 2x reed/magnetic sensors with leads
    Mounting Style:
    Flange Mount
    Rod End:
    Threaded female rod end with hex nut
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes two position sensors with wiring leads attached
    Condition Notes:
    SMC CDA1FN100-G0547-25 pneumatic cylinder pulled from a working environment; untested at our facility. Cylinder body is intact. Rod-end hex coupling and flange show surface rust. Position sensors with leads included. Sold as-is.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.70
    Was: $80.00
  • SMC NCDA1F200-3200 pneumatic cylinder full length view with sensor wiring lead SMC NCDA1F200-3200 label showing model number, 250 PSI max pressure, 1.70 MPa, Made in USA

    SMC NCDA1F200-3200 Pneumatic Cylinder 2" Bore 32" Stroke 250 PSI 3/8" NPT w/

    SMC

    $140.00
    Was: $250.00
    SMC NCDA1F200-3200 Pneumatic Cylinder 2" Bore 32" Stroke 250 PSI 3/8" NPT w/ Sensor Linear pneumatic cylinder manufactured by SMC. Delivers controlled linear motion in industrial pneumatic systems...
    49305
    SKU:
    49305
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    15.00 LBS
    Brand:
    SMC
    Model:
    NCDA1F200-3200
    MPN:
    NCDA1F200-3200
    Type:
    Pneumatic Cylinder / Air Cylinder
    SKU:
    49305
    Bore Size:
    2 in (50 mm)
    Stroke Length:
    32 in (3200 mm per model designation)
    Max Pressure:
    250 PSI / 1.70 MPa
    Port Size:
    3/8" NPT
    Rod End Type:
    Threaded Male End
    Sensor Included:
    Yes
    Series:
    NCDA1 Series
    Country/Region of Manufacture:
    USA
    Mounting Style:
    Flange Mount
    Actuator Type:
    Linear
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes position sensor with wiring lead attached
    Condition Notes:
    This SMC NCDA1F200-3200 pneumatic cylinder has been inspected and is in good used condition. Pulled from a working environment. Minor surface wear consistent with normal use. Sensor and wiring lead included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $140.00
    Was: $250.00
  • SMC NCDA1F200-3200 Pneumatic Cylinder 32" Stroke 2" Bore 3/8" NPT 250PSI

    SMC NCDA1F200-3200 Pneumatic Cylinder 32" Stroke 2" Bore 3/8" NPT 250PSI

    SMC

    $0.00
    SMC NCDA1F200-3200 Pneumatic Cylinder 32" Stroke 2" Bore 3/8" NPT 250PSIThis is an SMC medium-duty double-acting pneumatic cylinder designed for industrial automation and machinery control...
    49325
    SKU:
    49325
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    SMC
    Model:
    NCDA1F200-3200
    Type:
    Pneumatic Cylinder, Double-Acting
    SKU:
    49325
    Bore Diameter:
    2 inches
    Stroke Length:
    32 inches
    Maximum Pressure:
    250 PSI (1.7 MPa)
    Port Type:
    3/8" NPT threaded male
    Port Configuration:
    Double-acting with air ports for extend and retract
    Mounting Style:
    Standard industrial
    Duty Class:
    Medium duty
    Country/Region of Manufacture:
    Japan
    Condition:
    Used - Pulled from Working Environment
    Condition Notes:
    SMC NCDA1F200-3200 pneumatic cylinder, used, pulled from working environment, good condition.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $0.00
  • SMC TigerStack 3312TC 12-port 10Base-T rackmount hub — front-left angle view showing front panel ports and SMC logo SMC TigerStack 3312TC stackable hub — front panel view showing RJ45 ports, AUI port, and right-side controls

    SMC TigerStack 3312TC 12-Port 10Base-T Stackable Hub BNC AUI 1U Rackmount

    SMC

    $90.00
    Was: $300.00
    SMC TigerStack 3312TC 12-Port 10Base-T Stackable Hub BNC AUI 1U RackmountA 14-port Ethernet hub supporting 10Base-T, 10Base-2 (BNC), and 10Base-5 (AUI) connections. Designed for legacy network...
    11135
    SKU:
    11135
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    SMC
    Model:
    3312TC
    MPN:
    SMC3312TC
    Type:
    Multi-Segment Stackable Ethernet Hub
    SKU:
    11135
    Number of Ports:
    14 total (12 RJ45, 1 BNC, 1 AUI)
    Port Speed:
    10 Mbps (10Base-T)
    Network Technology:
    10Base-T Ethernet
    Interface Type:
    RJ45, BNC (10Base-2), AUI (10Base-5)
    Uplink Port:
    CSM (Cascade Stack Module) uplink port
    Stacking:
    Yes — stackable via CSM uplink connectors
    Segmentation:
    Dual-segment (Segment A and Segment B)
    Form Factor:
    1U Rackmount
    Power Requirements:
    100-250V AC, 50-60 Hz, 0.50-0.25A
    Management Type:
    Unmanaged (NMM slot present)
    Connector Type:
    RJ45, BNC, AUI (DB15), IEC AC inlet
    Country/Region of Manufacture:
    Taiwan
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no stacking cables included
    Condition Notes:
    SMC TigerStack 3312TC 12-Port 10Base-T Hub inspected and in good used condition. Pulled from a working environment where it was actively in use. Shows normal rack wear. Please view photos and contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $300.00
  • SMC 8013EPC ISA Ethernet NIC front view showing BNC and AUI DB15 connectors on bracket SMC 8013EPC ISA network card PCB rear view showing ISA edge connector and onboard chips

    SMC 8013EPC ISA Ethernet Network Card AUI BNC 10Base2 10Base5 16-bit NIC

    SMC

    $35.00
    Was: $70.00
    SMC 8013EPC ISA Ethernet Network Card AUI BNC 10Base2 10Base5 16-bit NICThe SMC 8013EPC is a 16-bit ISA Ethernet network interface card from SMC's EtherCard PLUS series. It provides 10 Mbps Ethernet...
    20211
    SKU:
    20211
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    8013EPC
    MPN:
    8013EPC
    Secondary Model:
    61-600406
    Type:
    ISA Ethernet Network Interface Card (NIC)
    SKU:
    20211
    Bus Interface:
    ISA 16-bit
    Network Speed:
    10 Mbps
    Network Standard:
    10Base2, 10Base5
    Connector Type:
    BNC (10Base2), AUI/DB15 (10Base5)
    Number of Ports:
    2 (1x BNC, 1x AUI/DB15)
    Form Factor:
    ISA Full-Height Card
    Condition:
    Used – Inspected
    Country/Region of Manufacture:
    United States
    Compatible With:
    ISA-bus PCs, AT-class and 286/386/486 systems
    Seller Notes:
    Card only; no software or accessories included.
    Condition Notes:
    SMC 8013EPC ISA Ethernet NIC inspected and in good used condition. PCB clean, connectors intact, no visible damage. Not bench-tested. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC 9332DST PCI 10/100 Ethernet Network Card RJ-45 DB9

    SMC 9332DST PCI 10/100 Ethernet Network Card RJ-45 DB9

    SMC

    $20.00
    Was: $30.00
    SMC 9332DST PCI 10/100 Ethernet Network Card RJ-45 DB9The SMC 9332DST is a PCI-based 10/100 Mbps Ethernet network adapter card featuring dual-interface connectivity — both RJ-45 and DB9 connectors on...
    20212
    SKU:
    20212
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC Networks
    Model:
    9332DST
    MPN:
    9332DST
    SKU:
    20212
    Condition:
    Used – Inspected
    Form Factor:
    PCI Card
    Interface Type:
    RJ-45, DB9 (Dual interface)
    Data Rate:
    10/100 Mbps
    Connector Type:
    PCI, RJ-45, DB9
    Standards Compliance:
    IEEE 802.3, 802.3u Fast Ethernet
    Compatible With:
    Legacy PCI systems, ISA/PCI motherboards
    Country of Manufacture:
    Taiwan
    Seller Notes:
    Card only, no additional accessories included
    Condition Notes:
    This SMC 9332DST PCI 10/100 Ethernet network card has been inspected and is in good used condition. It was pulled from a working environment and shows light cosmetic wear consistent with normal use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $30.00
  • SMC Elite 3812TP 10BASE-T concentrator – front panel view showing SMC logo, status LEDs, and two AUI/stacking ports on right SMC Elite 3812TP 10BASE-T concentrator – rear/side angle view showing power cable connected and right-side stacking port module

    SMC Elite 3812TP 10BASE-T Concentrator 12-Port Rackmount Hub SMC3812TP

    SMC

    $45.00
    Was: $90.00
    SMC Elite 3812TP 10BASE-T Concentrator 12-Port Rackmount Hub SMC3812TPThis is a 12-port 10BASE-T Ethernet hub designed for connecting legacy network devices. It functions as an unmanaged concentrator...
    11137
    SKU:
    11137
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    10.00 LBS
    Brand:
    SMC
    Model:
    Elite 3812TP
    MPN:
    SMC3812TP
    Type:
    10BASE-T Ethernet Concentrator / Hub
    SKU:
    11137
    Number of Ports:
    12
    Port Speed:
    10 Mbps (10BASE-T)
    Connector Type:
    RJ-45
    Network Standard:
    10BASE-T (IEEE 802.3)
    Form Factor:
    Rack Mount, 1U
    Management Type:
    Unmanaged
    Stacking:
    Yes (stacking cables sold separately)
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Stacking cables, terminators, and power supplies available separately.
    Country/Region of Manufacture:
    United States
    Compatible With:
    SMC Elite stackable hub series
    Condition Notes:
    SMC Elite 3812TP 10BASE-T 12-port hub inspected and in good used condition. Pulled from a working environment where it was in active use. Normal cosmetic wear. Stacking cables/terminators/power supplies sold separately.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • SMC CDQ2WB25-10D Pneumatic Cylinder Flow Meter SMC CDQ2WB25-10D Pneumatic Cylinder Flow Meter

    SMC CDQ2WB25-10D Compact Pneumatic Cylinder 25mm Bore 10mm Stroke XB6 Switch

    SMC

    $30.00
    Was: $60.00
    SMC CDQ2WB25-10D Compact Pneumatic Cylinder 25mm Bore 10mm Stroke XB6 SwitchThe SMC CDQ2WB25-10D is a compact double-acting pneumatic cylinder from SMC Corporation's CDQ2 series, featuring a 25mm...
    45578
    SKU:
    45578
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDQ2WB25-10D
    MPN:
    CDQ2WB25-10D
    Secondary Model:
    XB6*N-26
    SKU:
    45578
    Type:
    Compact Pneumatic Cylinder
    Series:
    CDQ2 Compact Cylinder Series
    Bore Size:
    25 mm
    Stroke:
    10 mm
    Max Operating Pressure:
    10 bar
    Operating Temperature Range:
    -10°C to +60°C
    Auto Switch / Sensor:
    XB6 Series Auto Switch
    Switch Connector:
    4-pin rectangular industrial connector
    Connector Rating:
    10A, 250V
    Port Labels:
    L10, L11 (push-in pneumatic fittings, top)
    IP Rating:
    IP-DE
    Seller Notes:
    Includes attached 4-pin connector cable and auto switch assembly
    Country/Region of Manufacture:
    Japan
    Application:
    Industrial automation, pneumatic actuation
    Form Factor:
    Compact / Inline
    Condition Notes:
    SMC CDQ2WB25-10D compact pneumatic cylinder. Inspected and in good condition; pulled from a working environment where it was in use and functional. Includes 4-pin connector cable and auto switch. Normal wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $30.00
    Was: $60.00
  • SMC CDQ2KB32-70DM-J79L non-rotating compact pneumatic cylinder — front-left view showing threaded rod end and finned aluminum body with wiring lead SMC CDQ2KB32-70DM-J79L compact cylinder — bottom view showing position sensor and wiring lead attached to cylinder body

    SMC CDQ2KB32-70DM-J79L Non-Rotating Pneumatic Cylinder 32mm Bore 70mm Stroke

    SMC

    $60.00
    Was: $125.00
    SMC CDQ2KB32-70DM-J79L Non-Rotating Pneumatic Cylinder 32mm Bore 70mm StrokeDouble-acting compact pneumatic cylinder with 32mm bore and 70mm stroke. Non-rotating single rod design operates on...
    48731
    SKU:
    48731
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDQ2KB32-70DM-J79L
    MPN:
    CDQ2KB32-70DM-J79L
    Type:
    Non-Rotating Compact Pneumatic Cylinder
    SKU:
    48731
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes attached position sensor wiring lead as shown in photos.
    Country/Region of Manufacture:
    Japan
    Bore Diameter:
    32mm
    Stroke Length:
    70mm
    Rod Diameter:
    16mm
    Max Operating Pressure:
    1.0 MPa / 10.2 kgf/cm² / 145 PSI
    Action Type:
    Double Acting
    Rod Type:
    Single Rod, Non-Rotating
    Series:
    CDQ2 / CQ2 Compact Series
    Mounting Style:
    Compact Body (CDQ2KB)
    Fluid Medium:
    Compressed Air
    Form Factor:
    Compact Body
    Condition Notes:
    SMC CDQ2KB32-70DM-J79L Non-Rotating Compact Pneumatic Cylinder. Inspected and in good used condition. Aluminum body shows light handling wear; rod tip has surface oxidation. Position sensor and wiring lead attached and present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • SMC CDM2B32-55 CM2 double acting pneumatic cylinder assembly with rod ends and pneumatic fittings — full unit top view SMC CDM2B32-55 pneumatic cylinder assembly showing full length with rod ends and attached wiring — side profile view

    SMC CDM2B32-55 CM2 Series Double Acting Pneumatic Cylinder 32mm Bore 1.0 MPa

    SMC

    $35.00
    Was: $70.00
    SMC CDM2B32-55 CM2 Series Double Acting Pneumatic Cylinder 32mm Bore 1.0 MPaDouble acting single rod pneumatic cylinder manufactured by SMC. Operates at 1.0 MPa maximum pressure with 32mm bore...
    48735
    SKU:
    48735
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDM2B32-55
    MPN:
    CDM2B32-55+35-H-7BL4-XB9C10
    Secondary Model:
    7BL4-XB9C10
    Type:
    Double Acting Single Rod Pneumatic Cylinder
    Series:
    CM2
    Bore Diameter:
    32mm
    Stroke Length:
    55mm + 35mm
    Rod Diameter:
    12mm
    Max Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Country/Region of Manufacture:
    Japan
    Mounting Style:
    Rod end / clevis-style rod ends (both sides)
    Condition:
    Used – Pulled from Working Environment
    SKU:
    48735
    Seller Notes:
    Includes attached pneumatic fittings, wiring leads, and rod end hardware as shown.
    Condition Notes:
    SMC CDM2B32-55 CM2 Series pneumatic cylinder inspected and in good used condition. Pulled from a working environment where it was in active use and functional. Light surface wear on hardware; fittings and wiring leads included as shown.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder full assembly with THK rod end joints on both ends – left side view SMC CDM2B40-85 CM2 pneumatic cylinder full assembly showing stainless body and flow control fittings – right side view

    SMC CDM2B40-85 CM2 Series Double Acting Pneumatic Cylinder 40mm Bore 85mm

    SMC

    $45.00
    Was: $90.00
    SMC CDM2B40-85 CM2 Series Double Acting Pneumatic Cylinder 40mm Bore 85mmDouble acting single rod pneumatic cylinder manufactured by SMC. Converts compressed air pressure into linear motion in both...
    48734
    SKU:
    48734
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    SMC
    Model:
    CDM2B40-85
    MPN:
    CDM2B40-85+10-H-7BL3-XB9C10
    Secondary Model:
    7BL3-XB9C10
    Type:
    Double Acting Single Rod Pneumatic Cylinder
    Series:
    CM2
    SKU:
    48734
    Bore Diameter:
    40mm
    Stroke Length:
    85mm + 10mm (95mm total)
    Rod Diameter:
    9mm
    Max Pressure:
    1.0 MPa / 10.2 kgf/cm² / 145 PSI
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Included Accessories:
    THK rod end joints (both ends), flow control fittings
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes THK rod end joints on both ends and inline flow control fittings
    Condition Notes:
    This SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder was pulled from a working environment and inspected. Body shows light surface soiling and minor wear. Both THK rod ends intact, flow control fittings present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • SMC CDM2G32-65-H7BL3 CM2 series pneumatic cylinder – full right-side view showing stainless steel body, push-in fittings, mounting bracket, and rod end SMC CDM2G32-65-H7BL3 pneumatic cylinder – left-side view showing full cylinder body, flow control fittings, and mounting bracket with rod extended

    SMC CDM2G32-65-H7BL3 CM2 Series Double Acting Pneumatic Cylinder 32mm Bore

    SMC

    $45.00
    Was: $90.00
    SMC CDM2G32-65-H7BL3 CM2 Series Double Acting Pneumatic Cylinder 32mm BoreDouble acting single rod pneumatic cylinder manufactured by SMC. Converts compressed air pressure into linear motion for...
    48733
    SKU:
    48733
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    CDM2G32-65-H7BL3
    MPN:
    CDM2G32-65-H7BL3-XC12
    Type:
    Double Acting Single Rod Pneumatic Cylinder
    Series:
    CM2
    SKU:
    48733
    Bore Diameter:
    32mm
    Stroke Length:
    65mm
    Rod Diameter:
    12mm
    Max Operating Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Body Material:
    Stainless Steel
    Country/Region of Manufacture:
    Japan
    Mounting:
    Foot/Bracket Mount
    Port Type:
    Push-in fitting (pneumatic tube)
    Condition:
    Used – Inspected, Good Condition
    Seller Notes:
    Includes attached mounting bracket and push-in tube fittings with flow control valves.
    Condition Notes:
    SMC CDM2G32-65-H7BL3 CM2 pneumatic cylinder. Inspected and in good used condition. Stainless body intact; rod and seal show normal wear. Push-in fittings and flow control valves present. Mounting bracket attached.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • SMC CDQ2B32-50DM-J79L compact pneumatic cylinder — three-quarter front view showing body, rod end, and push-in port fittings SMC CDQ2B32-50DM-J79L cylinder — rear/side view showing body profile, push-in fittings, and auto-switch sensor wiring

    SMC CDQ2B32-50DM-J79L Compact Pneumatic Cylinder 32mm Bore 50mm Stroke 1.0 MPa

    SMC

    $55.00
    Was: $100.00
    SMC CDQ2B32-50DM-J79L Compact Pneumatic Cylinder 32mm Bore 50mm Stroke 1.0 MPaThe SMC CDQ2B32-50DM-J79L is a double acting, single rod compact pneumatic cylinder from SMC's CQ2/CDQ2B series — one of...
    48732
    SKU:
    48732
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    CDQ2B32-50DM-J79L
    MPN:
    CDQ2B32-50DM-J79L
    Type:
    Compact Pneumatic Cylinder
    SKU:
    48732
    Series:
    CQ2 / CDQ2B
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Bore Diameter:
    32 mm
    Stroke Length:
    50 mm
    Rod Diameter:
    16 mm
    Max Operating Pressure:
    1.0 MPa / 145 PSI / 10.2 kgf/cm²
    Media:
    Compressed Air
    Port Type:
    Push-in fittings (included, visible on ports)
    Mounting Style:
    Through-hole / Standard Body Mount
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes attached push-in pneumatic fittings on both port ends.
    Condition Notes:
    SMC CDQ2B32-50DM-J79L compact pneumatic cylinder. Inspected and in good used condition. Body intact, rod moves freely. Light surface grime and wear on rod end and end caps. Push-in fittings attached and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $55.00
    Was: $100.00
  • SMC CDQ2KB32-60DM-J79L non-rotating pneumatic cylinder – three-quarter view showing rod end, auto-switch, and wiring leads SMC CDQ2KB32-60DM-J79L compact cylinder – port end view showing two push-to-connect pneumatic fittings and body fins

    SMC CDQ2KB32-60DM-J79L Non-Rotating Pneumatic Cylinder 32mm Bore 60mm Stroke

    SMC

    $95.00
    Was: $200.00
    SMC CDQ2KB32-60DM-J79L Non-Rotating Pneumatic Cylinder 32mm Bore 60mm StrokeThe SMC CDQ2KB32-60DM-J79L is a compact, non-rotating pneumatic cylinder from SMC's CQ2 series. It features a guided,...
    48730
    SKU:
    48730
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    CDQ2KB32-60DM-J79L
    MPN:
    CDQ2KB32-60DM-J79L
    Type:
    Compact Non-Rotating Pneumatic Cylinder
    SKU:
    48730
    Bore Diameter:
    32 mm
    Stroke Length:
    60 mm
    Rod Diameter:
    16 mm
    Max Pressure:
    1.0 MPa / 145 PSI / 10.2 kgf/cm²
    Action Type:
    Double Acting
    Rod Type:
    Single Rod, Non-Rotating
    Series:
    CQ2 / CDQ2
    Port/Fitting Type:
    Push-to-connect pneumatic fittings
    Actuator Type:
    Pneumatic
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes attached push-to-connect pneumatic fittings and auto-switch wiring leads
    Condition Notes:
    SMC CDQ2KB32-60DM-J79L non-rotating pneumatic cylinder inspected and in good used condition. Minor surface wear consistent with prior use. Rod, fittings, and wiring leads present. No cracks or damage noted.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • SMC CDQ2B32-60DM-J79L compact pneumatic cylinder – right-side view showing rod end and auto switches with wiring SMC CDQ2B32-60DM-J79L compact pneumatic cylinder – left-side view showing SMC label and port face

    SMC CDQ2B32-60DM-J79L Compact Pneumatic Cylinder 32mm Bore 60mm Stroke 1.0 MPa

    SMC

    $100.00
    Was: $200.00
    SMC CDQ2B32-60DM-J79L Compact Pneumatic Cylinder 32mm Bore 60mm Stroke 1.0 MPaDouble-acting compact pneumatic cylinder from SMC's CQ2/CDQ2B series. Operates at 1.0 MPa (145 PSI) with guided aluminum...
    48729
    SKU:
    48729
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    CDQ2B32-60DM-J79L
    MPN:
    CDQ2B32-60DM-J79L
    Type:
    Compact Pneumatic Cylinder
    SKU:
    48729
    Series:
    CQ2 / CDQ2B
    Bore Diameter:
    32 mm
    Stroke Length:
    60 mm
    Rod Diameter:
    16 mm
    Max Operating Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Actuator Action:
    Double Acting
    Rod Configuration:
    Single Rod
    Switch Option:
    J79L Auto Switch (2x included)
    Body Style:
    Compact / Guided
    Body Material:
    Aluminum
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes two J79L auto switches with wiring attached.
    Condition Notes:
    SMC CDQ2B32-60DM-J79L compact pneumatic cylinder inspected and in good used condition. Light surface scuffing on body; rod end shows minor oxidation. Both J79L auto switches present with wiring. No cracks or damage observed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $100.00
    Was: $200.00
  • SMC MXS20L-20B Pneumatic Air Slide Table — three-quarter front view showing full assembly with cylinder, mounting bracket, and ground wire SMC MXS20L-20B Pneumatic Air Slide Table — right-side three-quarter view showing dual guide rods, lead screw, and pneumatic cylinder end cap

    SMC MXS20L-20B Pneumatic Air Slide Table Actuator 20mm Bore 20mm Stroke 0.7 MPa

    SMC

    $220.00
    Was: $450.00
    SMC MXS20L-20B Pneumatic Air Slide Table Actuator 20mm Bore 20mm Stroke 0.7 MPaDual rod pneumatic air slide table actuator manufactured by SMC. This unit converts compressed air pressure into linear...
    48430
    SKU:
    48430
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    10.00 LBS
    Brand:
    SMC
    Model:
    MXS20L-20B
    MPN:
    MXS20L-20B
    Type:
    Pneumatic Air Slide Table Actuator
    SKU:
    48430
    Bore Size:
    20 mm
    Stroke Length:
    20 mm
    Operating Pressure:
    0.15 – 0.7 MPa
    Series:
    MXS
    Country/Region of Manufacture:
    Japan
    Overall Dimensions:
    10.75" x 6.25" x 4"
    Actuator Type:
    Dual Rod Air Slide Table
    Media:
    Compressed Air
    Condition:
    Used – Inspected and in Good Condition
    Form Factor:
    Compact Slide Table
    Seller Notes:
    Includes integrated assembly with pneumatic cylinder and mounting hardware as shown.
    Compatible With:
    SMC MXS Series accessories and automation fixtures
    Condition Notes:
    SMC MXS20L-20B Pneumatic Air Slide Table. Inspected and in good used condition. Shows normal surface wear and light grime on aluminum body. All visible components and fittings appear intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $220.00
    Was: $450.00
  • SMC VX2110V 2-Port Solenoid Valve – front label view showing SMC logo, model number, and pressure/vacuum rating plate SMC VX2110V Solenoid Valve – angled rear view showing brass body, mounting bracket, and DIN connector housing

    SMC VX2110V Direct Operated 2-Port Solenoid Valve DC Vacuum 10 Torr Orifice 2

    SMC

    $18.00
    Was: $40.00
    SMC VX2110V Direct Operated 2-Port Solenoid Valve DC Vacuum 10 Torr Orifice 2Direct operated solenoid valve designed for vacuum and low-pressure gas applications. Operates on 24V DC and handles...
    48183
    SKU:
    48183
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    VX2110V
    MPN:
    VX2110V
    Type:
    Direct Operated 2-Port Solenoid Valve
    SKU:
    48183
    Seller Notes:
    Sold as pictured; solenoid valve only.
    Country/Region of Manufacture:
    Japan
    Actuation Type:
    Direct Operated
    Number of Ports:
    2
    Coil Voltage Type:
    DC
    Coil Voltage:
    24V DC
    Pressure Rating:
    Vacuum to 10 Torr
    Orifice Size:
    2
    Body Material:
    Brass
    Media:
    Vacuum / Gas
    Series:
    VX
    Form Factor:
    Inline / Pipe Mount
    Connection Type:
    Threaded (NPT/PT)
    Connector Type:
    DIN Connector (Angled)
    Condition Notes:
    SMC VX2110V 2-Port Solenoid Valve inspected and in good used condition. Brass body shows oxidation from prior use; mounting bracket has minor corrosion. Solenoid housing and DIN connector intact. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $18.00
    Was: $40.00
  • SMC SFA300 clean gas filter cartridge disc type – top view showing stainless body, V-band clamp, and 1/4 FNPT port fitting SMC SFA300 SF Series filter cartridge – angled view showing engraved model name, Japan marking, and clamp bolt assembly

    SMC SFA300 SF Clean Gas Filter Cartridge Disc Type 1/4 FNPT Stainless Clamp

    SMC

    $75.00
    Was: $150.00
    SMC SFA300 SF Clean Gas Filter Cartridge Disc Type 1/4 FNPT Stainless ClampDisc-type clean gas filter cartridge manufactured by SMC for removal of particulates and contaminants from compressed gas...
    48182
    SKU:
    48182
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    SFA300
    MPN:
    SFA300
    Type:
    Clean Gas Filter Cartridge – Disc Type
    SKU:
    48182
    Series:
    SF Series
    Port Size:
    1/4 FNPT
    Filter Style:
    Disc Type
    Body Material:
    Stainless Steel
    Clamp Style:
    Tri-Clamp / V-Band Clamp
    Outer Diameter:
    Approximately 5 inches including clamp
    Country/Region of Manufacture:
    Japan
    Application:
    Clean Gas Filtration, Semiconductor, Cleanroom
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes white filter element and stainless V-band clamp assembly
    Condition Notes:
    SMC SFA300 SF clean gas filter cartridge, inspected, in good used condition. Pulled from active service. Shows surface oxidation and wear on clamp hardware and body; port fitting and clamp intact. Please view photos and contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • SMC ZSE4ED-01-27 digital vacuum pressure switch – front-left angled view showing display panel and push-in pneumatic fitting SMC ZSE4ED-01-27 vacuum pressure switch – rear-left angled view showing model label and DIN rail mount base

    SMC ZSE4ED-01-27 Digital Vacuum Pressure Switch -101kPa NPN 12-24VDC 2-Output

    SMC

    $45.00
    Was: $90.00
    SMC ZSE4ED-01-27 Digital Vacuum Pressure Switch -101kPa NPN 12-24VDC 2-OutputDigital vacuum pressure switch from SMC's ZSE4 Series. Monitors vacuum levels up to -101 kPa and outputs status via two...
    48176
    SKU:
    48176
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    ZSE4ED-01-27
    MPN:
    ZSE4ED-01-27
    Type:
    Digital Vacuum Pressure Switch
    SKU:
    48176
    Series:
    ZSE4 Series
    Supply Voltage:
    12-24VDC
    Output Type:
    NPN
    Number of Outputs:
    2
    Output 1 (Black):
    NPN, 30V, 80mA
    Output 2 (White):
    NPN, 30V, 80mA
    Max Pressure:
    -101 kPa (-760 mmHg)
    Pressure Type:
    Vacuum
    Display Type:
    Digital LED
    Port Size:
    1/8 inch (01 suffix)
    Connection Type:
    Push-in fitting (pneumatic)
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes attached push-in pneumatic fitting. No additional accessories.
    Form Factor:
    DIN Rail Mount / Compact Block
    Condition Notes:
    SMC ZSE4ED-01-27 digital vacuum pressure switch inspected and in good used condition. Pulled from a working environment. Shows industrial grime and minor corrosion on port threads. Push-in fitting included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $45.00
    Was: $90.00
  • SMC AMC320-02B exhaust cleaner with green filter housing and mounting bracket – right side view SMC AMC320-02B vacuum pump exhaust cleaner showing green mesh filter element and push-in fittings – left side view

    SMC AMC320-02B Exhaust Cleaner Vacuum Pump Muffler Filter AMC-EL3 300 L/min

    SMC

    $28.00
    Was: $60.00
    SMC AMC320-02B Exhaust Cleaner Vacuum Pump Muffler Filter AMC-EL3 300 L/minExhaust filter and muffler unit designed for SMC vacuum pump systems. Removes particulates and moisture from exhaust air...
    48154
    SKU:
    48154
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    AMC320-02B
    MPN:
    AMC320-02B
    Secondary Model:
    AMC-EL3
    SKU:
    48154
    Type:
    Exhaust Cleaner / Vacuum Pump Muffler Filter
    Element Number:
    AMC-EL3
    Max Flow Rate:
    300 L/min (ANR)
    Temperature Range:
    5–60°C
    Country/Region of Manufacture:
    Japan
    Compatible With:
    SMC vacuum pumps, AMC series exhaust cleaners
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes mounting bracket. Inspected and in good condition.
    Condition Notes:
    This SMC AMC320-02B Exhaust Cleaner has been inspected and is in good used condition. Pulled from a working environment. Housing intact, element clean, bracket and fittings present. Light wear consistent with use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00