SMC

SMC

  • SMC SFA100 disc-type clean gas filter cartridge – angled top view showing 1/4 FNPT inlet port and stainless V-band clamp assembly SMC SFA100 clean gas filter – top-down view showing filter disc body, center port fitting, and full clamp ring with tightening bolt

    SMC SFA100 Clean Gas Filter Disc Type 1/4 FNPT Stainless Semiconductor Cleanroom

    SMC

    $60.00
    Was: $150.00
    SMC SFA100 Clean Gas Filter Disc Type 1/4 FNPT Stainless Semiconductor Cleanroom SMC SFA100 is a disc-type clean gas filter cartridge designed for process gas filtration in semiconductor and...
    48155
    SKU:
    48155
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    SFA100
    MPN:
    SFA100
    SKU:
    48155
    Condition:
    Used – Inspected
    Seller Notes:
    Filter cartridge with clamp housing included; no additional accessories
    Country of Manufacture:
    Japan
    Form Factor:
    Disc / Inline Cartridge
    Filter Type:
    Disc Type Clean Gas Filter
    Port Size:
    1/4 inch FNPT
    Housing Diameter:
    Approximately 3 inches including clamps
    Housing Material:
    Stainless Steel
    Mounting Style:
    V-Band / Clamp Mount
    Application:
    Clean gas filtration; semiconductor, cleanroom, process gas
    Compatible With:
    SMC SFA series clean gas filter systems
    Condition Notes:
    This SMC SFA100 disc-type clean gas filter cartridge has been inspected and shows typical used service wear — light surface oxidation is visible on the clamp bolt and hardware, with minor scuffing on the stainless housing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $150.00
  • SMC EX120-SSH1 serial interface unit with 8x VQ1100-5 solenoid valves mounted on manifold — angled front-right view showing orange indicator flags and solenoid coil bodies SMC EX120-SSH1 serial interface unit with VQ1100-5 solenoid valve manifold — angled front-left view showing EX120 controller module and full valve bank assembly

    SMC EX120-SSH1 Serial Interface Unit w/ Manifold 8x VQ1100-5 Solenoid Valves

    SMC

    $150.00
    Was: $300.00
    SMC EX120-SSH1 Serial Interface Unit w/ Manifold 8x VQ1100-5 Solenoid Valves Serial interface control unit for pneumatic solenoid valve manifolds. Manages eight VQ1100-5 solenoid valves via SD Mode...
    47879
    SKU:
    47879
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    SMC
    Model:
    EX120-SSH1
    Secondary Model:
    VQ1100-5
    MPN:
    EX120-SSH1
    SKU:
    47879
    Condition:
    Used – Inspected
    Seller Notes:
    Includes EX120-SSH1 serial interface unit, manifold, and 8x VQ1100-5 solenoid valves
    Form Factor:
    DIN Rail / Panel Mount
    Number of Valves:
    8
    Valve Model:
    VQ1100-5
    Interface Type:
    Serial (SD Mode)
    Serial Interface Number:
    EX120-SSH1
    Terminal Connections:
    SG, L1, L2, FG
    Address Setting:
    x10 / x1 rotary switches
    Application:
    Pneumatic solenoid valve control, industrial automation
    Compatible With:
    SMC EX120 Series Serial Interface Systems
    Country of Manufacture:
    Japan
    Condition Notes:
    This SMC EX120-SSH1 Serial Interface Unit with VQ1100-5 solenoid valve manifold has been visually inspected. The unit shows moderate surface oxidation and discoloration on the valve body plates visible in the photos — please review the images
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $150.00
    Was: $300.00
  • SMC EX120-SSH1 serial interface unit with 8-station VQ1200-5 solenoid valve manifold – angled front-left view showing indicator LEDs and valve bodies SMC EX120-SSH1 serial interface unit and VQ1200-5 valve manifold assembly – angled rear-right view showing full assembly profile and DIN rail mount

    SMC EX120-SSH1 Serial Interface Unit Manifold 8x VQ1200-5 Solenoid Valve Bank

    SMC

    $90.00
    Was: $250.00
    SMC EX120-SSH1 Serial Interface Unit Manifold 8x VQ1200-5 Solenoid Valve Bank Serial interface unit and manifold block assembly with eight integrated VQ1200-5 solenoid valves. Controls pneumatic...
    47878
    SKU:
    47878
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    EX120-SSH1
    Secondary Model:
    VQ1200-5
    MPN:
    EX120-SSH1
    SKU:
    47878
    Condition:
    Used – Inspected
    Seller Notes:
    Includes EX120-SSH1 serial interface unit, manifold, and 8x VQ1200-5 solenoid valves
    Form Factor:
    DIN Rail / Manifold Block Assembly
    Number of Valve Stations:
    8
    Interface Type:
    Serial (SD Bus)
    Valve Model:
    VQ1200-5
    Series:
    EX120 Series
    Address Configuration:
    Rotary switch (x10 / x1), Terminal ON/OFF
    Connections:
    SG, L1, L2, FG terminal block
    Compatible With:
    SMC VQ1000/VQ1200 Series Valve Manifolds
    Application:
    Pneumatic automation, valve control via serial fieldbus
    Country of Manufacture:
    Japan
    Condition Notes:
    This SMC EX120-SSH1 Serial Interface Unit with VQ1200-5 solenoid valve manifold has been inspected and shows moderate surface soiling and rust staining consistent with industrial service use — visible on the manifold housing and interface unit
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $250.00
  • SMC CDM2C20-50-H7BL pneumatic cylinder full assembly with rod end bearings on both ends, front angled view SMC CDM2C20-50-H7BL double acting pneumatic cylinder side profile showing body and rod end fittings

    SMC CDM2C20-50-H7BL Pneumatic Cylinder 20mm Bore 50mm Stroke 145 PSI

    SMC

    $27.90
    Was: $78.00
    SMC CDM2C20-50-H7BL Pneumatic Cylinder 20mm Bore 50mm Stroke 145 PSI Double-acting compact pneumatic cylinder manufactured by SMC. Designed for linear motion applications in industrial automation and...
    48122
    SKU:
    48122
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    SMC
    Model:
    CDM2C20-50-H7BL
    MPN:
    CDM2C20-50-H7BL-XB9
    SKU:
    48122
    Condition:
    Used – Inspected
    Series:
    CDM2
    Bore Size:
    20mm
    Stroke Length:
    50mm
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Max Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Form Factor:
    Compact Cylinder
    End Fittings:
    Knuckle joint / rod end bearings both ends
    Port Type:
    Push-in fittings (pneumatic quick-connect)
    Country of Manufacture:
    Japan
    Seller Notes:
    Includes rod end bearings on both ends as shown.
    Compatible With:
    SMC CDM2 Series pneumatic systems and fixtures
    Condition Notes:
    This SMC CDM2C20-50-H7BL pneumatic cylinder has been inspected and appears to be in good used condition. Images show surface rust and wear on the cylinder body and rod ends consistent with prior industrial use; the bore and fittings appear intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $27.90
    Was: $78.00