Description
SMC CDM2C20-50-H7BL Pneumatic Cylinder 20mm Bore 50mm Stroke 145 PSI
Double-acting compact pneumatic cylinder manufactured by SMC. Designed for linear motion applications in industrial automation and pneumatic systems.
Specifications & What's Included
- Model: CDM2C20-50-H7BL | MPN: CDM2C20-50-H7BL-XB9
- Bore: 20mm | Stroke: 50mm
- Max Pressure: 1.0 MPa (145 PSI)
- Double-acting, single rod configuration
- Rod end bearings on both ends
- Push-in pneumatic quick-connect fittings
- Manufactured in Japan
Applications
Suitable for automation fixtures, manufacturing equipment, and pneumatic control systems requiring compact linear actuation.
Please note: We may have multiple units of this item in stock. The unit you receive may vary slightly from the one shown in the photos. All units are functionally equivalent and inspected to the same standard.
Condition: Used
This SMC CDM2C20-50-H7BL pneumatic cylinder has been inspected and appears to be in good used condition. Images show surface rust and wear on the cylinder body and rod ends consistent with prior industrial use; the bore and fittings appear intact. It was pulled from a working environment where it was previously in use. Please view our photo set and contact us if you have any questions.
This SMC CDM2C20-50-H7BL pneumatic cylinder has been inspected and appears to be in good used condition. Images show surface rust and wear on the cylinder body and rod ends consistent with prior industrial use; the bore and fittings appear intact. It was pulled from a working environment where it was previously in use. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
SMC |
Model: |
CDM2C20-50-H7BL |
MPN: |
CDM2C20-50-H7BL-XB9 |
SKU: |
48122 |
Condition: |
Used – Inspected |
Series: |
CDM2 |
Bore Size: |
20mm |
Stroke Length: |
50mm |
Action Type: |
Double Acting |
Rod Configuration: |
Single Rod |
Max Pressure: |
1.0 MPa (145 PSI / 10.2 kgf/cm²) |
Form Factor: |
Compact Cylinder |
End Fittings: |
Knuckle joint / rod end bearings both ends |
Port Type: |
Push-in fittings (pneumatic quick-connect) |
Country of Manufacture: |
Japan |
Seller Notes: |
Includes rod end bearings on both ends as shown. |
Compatible With: |
SMC CDM2 Series pneumatic systems and fixtures |
Condition Notes: |
This SMC CDM2C20-50-H7BL pneumatic cylinder has been inspected and appears to be in good used condition. Images show surface rust and wear on the cylinder body and rod ends consistent with prior industrial use; the bore and fittings appear intact. It |
