SMC

SMC

  • SMC AW2000-02BG-CR filter regulator – left side view showing filter bowl and analog pressure gauge SMC AW2000-02BG-CR filter regulator – right side view showing regulator knob and port connection

    SMC AW2000-02BG-CR Filter Regulator Combo 0.05-0.85 MPa 1/4 NPT

    SMC

    $22.00
    Was: $40.00
    SMC AW2000-02BG-CR Filter Regulator Combo 0.05-0.85 MPa 1/4 NPTThis is a combination filter-regulator unit designed for pneumatic air preparation and compressed air filtration. It removes...
    48148
    SKU:
    48148
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    AW2000-02BG-CR
    MPN:
    AW2000-02BG-CR
    Type:
    Combination Filter Regulator
    SKU:
    48148
    Series:
    AW2000
    Port Size:
    1/4 (02)
    Set Pressure Range:
    0.05 – 0.85 MPa
    Maximum Working Pressure:
    1.0 MPa (10.2 kgf/cm²)
    Maximum Operating Temperature:
    60°C
    Bowl Material:
    Polycarbonate
    Gauge Included:
    Yes – SMC analog pressure gauge (MPa / kgf/cm²)
    Country/Region of Manufacture:
    Japan
    Application:
    Pneumatic air preparation, compressed air filtration
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no additional accessories included.
    Condition Notes:
    SMC AW2000-02BG-CR filter regulator inspected and in good used condition. Shows typical industrial wear: bowl residue, knob scuffing, surface rust on screws/fittings, yellowed gauge face. Bowl and body intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.00
    Was: $40.00
  • SMC CDPXWL32-75-J79L CXWL pneumatic linear slide — three-quarter view showing aluminum body and dual guide rods with ball joints extended SMC CDPXWL32-75-J79L linear slide cylinder — three-quarter rear view showing plate mounting body, guide rod assembly, and port block

    SMC CDPXWL32-75-J79L CXWL Series Pneumatic Linear Slide 32mm Bore 75mm Stroke

    SMC

    $270.00
    Was: $550.00
    SMC CDPXWL32-75-J79L CXWL Series Pneumatic Linear Slide 32mm Bore 75mm Stroke 145PSIThe SMC CDPXWL32-75-J79L is a dual-rod pneumatic linear slide cylinder from SMC's CXWL series, featuring a 32 mm...
    48146
    SKU:
    48146
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    SMC
    Model:
    CDPXWL32-75-J79L
    MPN:
    CDPXWL32-75-J79L
    Type:
    Pneumatic Linear Slide Cylinder
    Series:
    CXWL
    SKU:
    48146
    Bore Size:
    32 mm
    Stroke Length:
    75 mm
    Max Pressure:
    1.0 MPa / 145 PSI / 10.2 kgf/cm²
    Bearing Type:
    Ball Bushing
    Auto Switch Compatible:
    Yes
    Mounting Type:
    Plate Mounting
    Actuator Type:
    Pneumatic
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Includes two pneumatic push-in fittings visible on end cap
    Condition Notes:
    SMC CDPXWL32-75-J79L CXWL pneumatic linear slide. Inspected and in good condition. Minor surface marks on guide rods; body and fittings intact. No structural damage noted.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $270.00
    Was: $550.00
  • SMC SRH4100-03 stainless steel clean room regulator – front and side view with integrated pressure gauge showing 0–0.4 MPa scale SMC SRH4100-03 clean room regulator – inlet port end view showing stainless steel hex body and black adjustment knob

    SMC SRH4100-03 Stainless Steel Clean Room Regulator 0.01-0.2 MPa 3/8 FNPT

    SMC

    $110.00
    Was: $225.00
    SMC SRH4100-03 Stainless Steel Clean Room Regulator 0.01-0.2 MPa 3/8 FNPTClean room pressure regulator manufactured by SMC for controlled gas delivery in sterile and controlled environments...
    48144
    SKU:
    48144
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    SRH4100-03
    MPN:
    SRH4100-03
    Type:
    Clean Room Pressure Regulator
    SKU:
    48144
    Series:
    SRH
    Set Pressure Range:
    0.01 - 0.2 MPa
    Port Size:
    3/8 FNPT
    Cleaning Grade:
    Grade B – Ultrasonic Cleaning
    Body Material:
    Stainless Steel
    Gauge Range:
    0 - 0.4 MPa
    Lubrication:
    Non-lube (Use No Oil)
    Country/Region of Manufacture:
    Japan
    Application:
    Clean Room, Semiconductor, Pharmaceutical
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Regulator only; no accessories included.
    Condition Notes:
    SMC SRH4100-03 clean room regulator inspected and in good used condition. Stainless body is intact; screws show light oxidation from storage. Gauge dial is clean and legible. Port threads appear undamaged. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • SMC ZSE4E-01-27 vacuum pressure switch front view showing SMC label and attached gray cable bundled with tie wrap SMC ZSE4E-01-27 vacuum pressure switch rear view showing port connection and gray cable with visible rust and wear on housing

    SMC ZSE4E-01-27 Vacuum Pressure Switch 12-24VDC NPN -101 kPa Pneumatic

    SMC

    $40.00
    Was: $80.00
    SMC ZSE4E-01-27 Vacuum Pressure Switch 12-24VDC NPN -101 kPa PneumaticThe SMC ZSE4E-01-27 is a compact digital vacuum pressure switch from SMC Corporation's ZSE4 series. It monitors vacuum levels in...
    48132
    SKU:
    48132
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    ZSE4E-01-27
    MPN:
    ZSE4E-01-27
    Type:
    Vacuum Pressure Switch
    SKU:
    48132
    Voltage Rating:
    12-24VDC
    Output Type:
    NPN (2 outputs)
    Output 1:
    NPN, 30V, 80mA (Black wire)
    Output 2:
    NPN, 30V, 80mA (White wire)
    Max Pressure:
    -101 kPa (-760 mmHg)
    Wire Colors:
    Brown (+), Black (OUT1), White (OUT2), Blue (GND)
    Display:
    Integrated digital display
    Port Size:
    M5 (visible on bottom port)
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only with attached cable. No additional accessories included.
    Application:
    Pneumatic vacuum detection, industrial automation
    Series:
    ZSE4 Series
    Condition Notes:
    SMC ZSE4E-01-27 Vacuum Pressure Switch inspected and in good used condition. Housing shows rust staining and discoloration; cable intact. Digital display and pushbuttons present. Port appears clean.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $40.00
    Was: $80.00
  • SMC CDQ2B32-60DM and CDQ2KB32-35DM compact pneumatic cylinder pair – top angled view showing both cylinders mounted together with wiring leads SMC compact pneumatic cylinder pair – side view showing push-in fittings and pneumatic tubing ports along the bottom

    SMC CDQ2B32-60DM CDQ2KB32-35DM Compact Pneumatic Cylinder 32mm Bore Pair

    SMC

    $95.00
    Was: $200.00
    SMC CDQ2B32-60DM CDQ2KB32-35DM Compact Pneumatic Cylinder 32mm Bore PairThis is a matched pair of SMC CQ2 series double-acting compact pneumatic cylinders with 32mm bore diameter. The pair consists...
    48120
    SKU:
    48120
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDQ2B32-60DM
    Secondary Model:
    CDQ2KB32-35DM
    MPN:
    CDQ2B32-60DM / CDQ2KB32-35DM
    SKU:
    48120
    Type:
    Compact Pneumatic Cylinder
    Series:
    CQ2 / CQ2K
    Bore Size:
    32mm
    Stroke 1 (CDQ2B32-60DM):
    60mm
    Stroke 2 (CDQ2KB32-35DM):
    35mm
    Max Pressure:
    1.0 MPa / 10.2 Kgf/cm² / 145 PSI
    Lot Code / Date Code:
    J79L
    Quantity Included:
    2 cylinders (sold as a pair)
    Actuator Type:
    Double Acting
    Mounting Style:
    Basic / Through-Hole
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Sold as a matched pair: one CDQ2B32-60DM and one CDQ2KB32-35DM
    Condition Notes:
    SMC CDQ2B32-60DM & CDQ2KB32-35DM compact pneumatic cylinder pair. Both inspected and in good used condition. Surface rust on fasteners and end caps; bodies intact. Push-in fittings and switch leads present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $95.00
    Was: $200.00
  • SMC VX2130M direct operated solenoid valve front view with lead wire and coil connector cap SMC VX2130M solenoid valve side view showing 1/4 FNPT port and mounting bracket

    SMC VX2130M Direct Operated 2-Port Solenoid Valve Vacuum 1/4 FNPT DC 24V

    SMC

    $65.00
    Was: $125.00
    SMC VX2130M Direct Operated 2-Port Solenoid Valve Vacuum 1/4 FNPT DC 24VThe SMC VX2130M is a direct operated, 2-port (2-way) solenoid valve designed specifically for vacuum service. Made in Japan by...
    48119
    SKU:
    48119
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    VX2130M
    MPN:
    VX2130M
    Type:
    Direct Operated 2-Port Solenoid Valve
    SKU:
    48119
    Number of Ports:
    2
    Port Size:
    1/4 FNPT
    Port Thread Type:
    FNPT (Female NPT)
    Actuation Type:
    Direct Operated (Solenoid)
    Valve Function:
    2-Port / 2-Way
    Pressure Rating:
    for Vacuum to 10 Torr
    Orifice Size:
    4.5 mm
    Coil Voltage:
    DC 24V
    Insulation Class:
    Class B
    Coil Type:
    DC
    Media:
    Vacuum / Air
    Country/Region of Manufacture:
    Japan
    Mounting:
    Bracket mounted (bracket included)
    Condition:
    Used – Inspected
    Seller Notes:
    Includes mounting bracket and lead wire with coil connector.
    Condition Notes:
    SMC VX2130M Direct Operated 2-Port Solenoid Valve. Inspected and in good used condition. Body shows light surface discoloration from prior use. FNPT port and bracket intact. Lead wire included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • SMC VX3344M direct operated 2-port solenoid valve — right-side view showing solenoid coil housing and push-in fittings SMC VX3344M solenoid valve — left-side angle view showing body assembly and coil connector

    SMC VX3344M Direct Operated 2-Port Solenoid Valve 1/4 NPT Vacuum 24VDC

    SMC

    $75.00
    Was: $150.00
    SMC VX3344M Direct Operated 2-Port Solenoid Valve 1/4 NPT Vacuum 24VDCDirect operated 2-port solenoid valve manufactured by SMC for vacuum applications. Uses 24VDC coil voltage with DIN right-angle...
    48118
    SKU:
    48118
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    VX3344M
    MPN:
    VX3344M
    Type:
    Direct Operated 2-Port Solenoid Valve
    SKU:
    48118
    Seller Notes:
    Includes push-in tube fittings as shown in photos
    Country/Region of Manufacture:
    Japan
    Port Size:
    1/4 NPT
    Number of Ports:
    2
    Valve Configuration:
    2-Port (2-Way) Direct Operated
    Coil Voltage:
    24VDC
    Application:
    Vacuum
    Vacuum Rating:
    Vacuum rated (see label for Torr rating)
    Connector Type:
    DIN connector (right-angle coil connector)
    Fitting Type:
    Push-in tube fittings
    Body Material:
    Metal body with solenoid coil housing
    Condition Notes:
    SMC VX3344M 2-Port Solenoid Valve has been inspected and is in good used condition. Body, coil housing, and push-in fittings are intact. Light surface wear consistent with prior use. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • SMC VNA111A 2-Way Process Valve with solenoid operator and wiring harness — full assembly view SMC VNA111A process valve front view showing push-in tube fittings, solenoid body, and wiring cable

    SMC VNA111A 2-Way Process Valve 1/8 FNPT 0-1MPa Pilot Operated w/ Solenoid

    SMC

    $28.00
    Was: $60.00
    SMC VNA111A 2-Way Process Valve 1/8 FNPT 0-1MPa Pilot Operated w/ SolenoidThe SMC VNA111A is a 2-way (2-port) pilot-operated process valve from SMC Corporation's VNA series. It uses a pneumatic pilot...
    48114
    SKU:
    48114
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    VNA111A
    MPN:
    VNA111A
    Type:
    2-Way Pilot-Operated Process Valve
    SKU:
    48114
    Valve Configuration:
    2-Way (2-Port)
    Actuation Type:
    Pilot Operated with Solenoid
    Port Size:
    1/8 FNPT
    Main Pressure Range:
    0–1 MPa
    Pilot Pressure Range:
    0.2–0.7 MPa
    Valve Series:
    VNA
    Body Material:
    Metal (aluminum alloy body)
    Connector Type:
    Push-in tube fittings (blue, elbow type)
    Mounting:
    Bracket mount
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and Pulled from Working Environment
    Seller Notes:
    Includes solenoid operator and wiring harness with cable
    Condition Notes:
    SMC VNA111A 2-Way Process Valve inspected and in good used condition. Shows normal surface wear. Push-in fittings and solenoid intact. Wiring harness included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00
  • SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder – front angled view showing rod end and body SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder – rear angled view showing aluminum body and through-hole mounting corners

    SMC CDQ2B63-75DMZ-A93 Compact Pneumatic Cylinder 63mm Bore 75mm Stroke 1.0MPa

    SMC

    $75.00
    Was: $150.00
    SMC CDQ2B63-75DMZ-A93 Compact Pneumatic Cylinder 63mm Bore 75mm Stroke 1.0MPaDouble-acting pneumatic cylinder with 63mm bore and 75mm stroke length. Operates at 1.0 MPa maximum pressure and delivers...
    48095
    SKU:
    48095
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    SMC
    Model:
    CDQ2B63-75DMZ-A93
    MPN:
    CDQ2B63-75DMZ-A93
    Secondary Model:
    CDQ2B63-75DMZ
    Type:
    Compact Double-Acting Pneumatic Cylinder
    SKU:
    48095
    Series:
    CDQ2B
    Bore Size:
    63 mm
    Stroke Length:
    75 mm
    Action Type:
    Double Acting
    Rod Type:
    Single Rod
    Mounting Style:
    Through-Hole
    Max Operating Pressure:
    1.0 MPa
    Body Material:
    Aluminum
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Cylinder only; tested and in working order.
    Country/Region of Manufacture:
    China
    Form Factor:
    Compact / Short Stroke
    Condition Notes:
    SMC CDQ2B63-75DMZ-A93 compact pneumatic cylinder tested and in working order. Aluminum body shows light surface wear. Rod end and port fittings intact. No visible damage.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • SMC CDM2C20-80 double acting pneumatic cylinder – full assembly view showing rod eye end, clevis mount, push-in fittings, and auto-switch wiring SMC CDM2C20-80 pneumatic cylinder – opposite side view showing SMC label, rust on cylinder body, push-in fittings and auto-switch

    SMC CDM2C20-80 Pneumatic Cylinder 20mm Bore 80mm Stroke Double Acting

    SMC

    $35.00
    Was: $70.00
    SMC CDM2C20-80 Pneumatic Cylinder 20mm Bore 80mm Stroke Double ActingThe SMC CDM2C20-80 is a compact double acting, single rod pneumatic cylinder from SMC Corporation's CDM2 series. It uses...
    47967
    SKU:
    47967
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDM2C20-80
    MPN:
    CDM2C20-80-H7BL-XB9
    Type:
    Double Acting Pneumatic Cylinder
    SKU:
    47967
    Bore Size:
    20mm
    Stroke Length:
    80mm
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Max Operating Pressure:
    1.0 MPa (145 PSI / 10.2 kgf/cm²)
    Series:
    CDM2 Series
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected, surface rust/corrosion present
    Seller Notes:
    Unit includes push-in fittings and auto-switch sensor wiring as shown.
    Application:
    Industrial Automation, Pneumatic Actuation
    Body Material:
    Stainless Steel Tube
    End Configuration:
    Clevis / Rod Eye both ends
    Condition Notes:
    SMC CDM2C20-80 pneumatic cylinder, inspected and in good used condition. Surface rust/corrosion present on cylinder body (visible in photos). Fittings, rod eye, and auto-switch wiring appear intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC CDM2B20-50+30-H pneumatic cylinder full assembly view showing rod ends and push-in fittings on white background SMC CDM2B20-50+30-H pneumatic cylinder side profile view showing cylinder body, rod ends, and multiple push-in fittings

    SMC CDM2B20-50+30-H Pneumatic Cylinder 20mm Bore 145 PSI w/ Rod End Fittings

    SMC

    $22.00
    Was: $40.00
    SMC CDM2B20-50+30-H Pneumatic Cylinder 20mm Bore 145 PSI w/ Rod End FittingsDouble-acting pneumatic cylinder from SMC's CM2/CDM2B series. Rated for 145 PSI (1.0 MPa) and designed for linear actuation...
    47966
    SKU:
    47966
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    CDM2B20-50+30-H
    MPN:
    CDM2B20-50+30-H
    Secondary Model:
    7BL4-XB9C10
    SKU:
    47966
    Type:
    Double-Acting Pneumatic Cylinder
    Bore Diameter:
    20mm
    Stroke:
    50mm base stroke + 30mm extended stroke
    Max Pressure:
    1.0 MPa / 10.2 Kgf/cm² / 145 PSI
    End Configuration:
    Rod End (clevis / spherical rod end both ends)
    Fittings Included:
    Push-in pneumatic fittings (multiple)
    Country/Region of Manufacture:
    Japan
    Series:
    CM2 / CDM2B Series
    Application:
    Industrial automation, assembly, linear actuation
    Condition:
    Used – Inspected
    Seller Notes:
    Includes rod ends on both ends and push-in pneumatic fittings as shown.
    Condition Notes:
    SMC CDM2B20-50+30-H pneumatic cylinder. Clean body, legible label. Surface corrosion on rod ends (typical industrial pull). Fittings present and intact. See photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.00
    Was: $40.00
  • SMC CDM2B20-150 double acting pneumatic cylinder full side view with position sensor leads and speed controller fitting SMC CDM2B20-150 cylinder label showing model number, max pressure 1.0 MPa, 10.2 kgf/cm², 145 PSI, Made in Japan

    SMC CDM2B20-150 Pneumatic Cylinder 20mm Bore 150mm Stroke Double Acting

    SMC

    $35.00
    Was: $70.00
    SMC CDM2B20-150 Pneumatic Cylinder 20mm Bore 150mm Stroke Double ActingDouble acting pneumatic cylinder with 20mm bore and 150mm stroke. Operates on compressed air at up to 1.0 MPa and is designed...
    47965
    SKU:
    47965
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    SMC
    Model:
    CDM2B20-150
    MPN:
    CDM2B20-150
    Type:
    Double Acting Pneumatic Cylinder
    SKU:
    47965
    Bore Diameter:
    20mm
    Stroke Length:
    150mm
    Rod Diameter:
    8mm
    Max Pressure:
    1.0 MPa / 10.2 kgf/cm² / 145 PSI
    Action Type:
    Double Acting
    Rod Configuration:
    Single Rod
    Series:
    CDM2B
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Includes attached speed controller fittings and position sensor leads
    Compatible With:
    SMC CDM2 series pneumatic automation systems
    Form Factor:
    Round Body / Inline
    Medium:
    Compressed Air / Pneumatic
    Condition Notes:
    SMC CDM2B20-150 pneumatic cylinder inspected and in good used condition. Stainless body is clean, rod and fittings intact, speed controller fittings and sensor leads present. Normal light handling marks. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC CDQ2KB32-75DM CDQ2B32-60DM dual pneumatic cylinder assembly — left side view showing push-to-connect fittings and sensor labels CYL5, CYL6 SMC dual pneumatic cylinder assembly — right side view showing opposite end with rod extension and mounting block

    SMC CDQ2KB32-75DM CDQ2B32-60DM Dual Pneumatic Cylinder Assembly 145 PSI

    SMC

    $90.00
    Was: $175.00
    SMC CDQ2KB32-75DM CDQ2B32-60DM Dual Pneumatic Cylinder Assembly 145 PSIDual compact pneumatic cylinder assembly from SMC's CDQ2 series. Two cylinders with different stroke lengths mounted on a single...
    47962
    SKU:
    47962
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    CDQ2KB32-75DM
    Secondary Model:
    CDQ2B32-60DM
    MPN:
    CDQ2KB32-75DM-J79L
    SKU:
    47962
    Type:
    Dual Pneumatic Cylinder Assembly
    Series:
    CDQ2 / CQ2
    Bore Size:
    32 mm
    Max Pressure:
    1.0 MPa / 10.2 Kgf/cm² / 145 PSI
    Stroke (CDQ2KB32-75DM):
    75 mm
    Stroke (CDQ2B32-60DM):
    60 mm
    Cylinder Style:
    Compact / Thin
    Mounting:
    End plate / flange block
    Port / Fitting Type:
    Push-to-connect pneumatic fittings
    Country/Region of Manufacture:
    Japan
    Condition:
    Used – Inspected and in Good Condition
    Seller Notes:
    Dual cylinder assembly with push-to-connect fittings and end mounting block included.
    Condition Notes:
    SMC CDQ2KB32-75DM / CDQ2B32-60DM dual pneumatic cylinder assembly. Inspected and in good used condition. Cylinder bodies clean, fittings present, mounting block intact. Normal light wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $90.00
    Was: $175.00
  • SMC CDQ2KB32-35DM compact pneumatic cylinder – full assembly side view with push-to-connect fittings installed on top ports SMC CDQ2B32-60DM compact pneumatic cylinder – opposite side full view showing top fittings and threaded rod end

    SMC CDQ2KB32-35DM CDQ2B32-60DM Compact Pneumatic Cylinder 32mm Bore 145 PSI

    SMC

    $75.00
    Was: $150.00
    SMC CDQ2KB32-35DM CDQ2B32-60DM Compact Pneumatic Cylinder 32mm Bore 145 PSIThis listing includes two SMC CDQ2 series compact pneumatic cylinders: the CDQ2KB32-35DM (35mm stroke) and the CDQ2B32-60DM...
    47953
    SKU:
    47953
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    CDQ2KB32-35DM
    Secondary Model:
    CDQ2B32-60DM
    MPN:
    CDQ2KB32-35DM
    Type:
    Compact Pneumatic Cylinder
    SKU:
    47953
    Series:
    CDQ2
    Bore Size:
    32mm
    Stroke (CDQ2KB32-35DM):
    35mm
    Stroke (CDQ2B32-60DM):
    60mm
    Extended Length (CDQ2KB32-35DM):
    10.25 in
    Extended Length (CDQ2B32-60DM):
    14.00 in
    Max Pressure:
    1.0 MPa / 10.2 kgf/cm² / 145 PSI
    Media:
    Compressed Air
    Actuator Type:
    Double Acting
    Rod End:
    Male Threaded
    Body Material:
    Aluminum
    Port Type:
    Push-to-Connect Pneumatic Fittings
    Seller Notes:
    Includes push-to-connect pneumatic fittings installed on ports
    Country/Region of Manufacture:
    Japan
    Condition Notes:
    SMC CDQ2KB32-35DM & CDQ2B32-60DM compact pneumatic cylinders inspected and in good used condition. Aluminum bodies clean, minor oxidation on rod end hardware, push-to-connect fittings installed. Normal industrial wear.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • SMC PSE100-B DIN rail pressure switch front panel showing digital display, CH.A CH.B channel indicators, R A S V buttons, and OUT1 OUT2 indicators SMC PSE100-B pressure switch rear and bottom view showing DIN rail clip and plastic housing — cream colored enclosure

    SMC PSE100-B DIN Rail Pressure Switch 0-1 MPa 0-101 kPa 2-Ch NPN 30V

    SMC

    $110.00
    Was: $225.00
    SMC PSE100-B DIN Rail Pressure Switch 0-1 MPa 0-101 kPa 2-Ch NPN 30VDigital pressure switch and sensor controller designed for DIN rail mounting in industrial pneumatic and hydraulic systems...
    47877
    SKU:
    47877
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    PSE100-B
    MPN:
    PSE100-B
    Type:
    Digital DIN Rail Pressure Switch / Sensor Controller
    SKU:
    47877
    Pressure Range:
    0-1 MPa / 0-10.2 kgf/cm² / 0-101 kPa / 0-760 mmHg / 0-100 kPa
    Number of Channels:
    2 (CH.A and CH.B)
    Output Type:
    NPN
    Output Rating:
    NPN 30V 80mA Max
    Number of Outputs:
    2 (OUT 1, OUT 2)
    Analog Input 1:
    1-5V
    Analog Input 2:
    4-20mA
    Pressure Units Displayed:
    kPa, MPa, mmHg, kgf/cm², bar, InHg
    Mounting Type:
    DIN Rail
    Country/Region of Manufacture:
    Japan
    Manufacturer:
    SMC Corporation
    Form Factor:
    DIN Rail Mount Module
    Condition:
    Used – Inspected and Tested
    Seller Notes:
    Unit only; no accessories included. Wiring diagram label intact on base.
    Condition Notes:
    SMC PSE100-B DIN rail pressure switch. Inspected, good used condition. Housing shows light yellowing typical of age. Display cover intact, buttons and terminals good. DIN rail clip present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • SMC ZSE30-01-25 2-color digital pressure switch – front panel view showing blue LCD display, OUT indicator, and SET navigation buttons SMC ZSE30-01-25 pressure switch – rear view showing multi-pin connector port and brass R1/8 push-in elbow fitting, Made in Japan label visible

    SMC ZSE30-01-25 2-Color Digital Pressure Switch -100 to 100 kPa NPN 12-24VDC

    SMC

    $27.20
    Was: $45.00
    SMC ZSE30-01-25 2-Color Digital Pressure Switch -100 to 100 kPa NPN 12-24VDC Digital pressure switch with 2-color LCD display for monitoring and switching at set pressure points. Operates across -100...
    47074
    SKU:
    47074
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    0.95 LBS
    Brand:
    SMC
    Model:
    ZSE30-01-25
    MPN:
    ZSE30-01-25
    Type:
    2-Color Digital Pressure Switch
    SKU:
    47074
    Pressure Range:
    -100 to 100 kPa
    Output Type:
    NPN
    Supply Voltage:
    12-24VDC
    Current Consumption:
    45mA Max
    Power Classification:
    CLASS 2
    Port Thread Type:
    R 1/8, M5 female
    Display Type:
    2-Color Digital LCD
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Panel Mount / DIN Rail
    Series:
    ZSE30
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes brass push-in elbow fitting attached to port
    Condition Notes:
    SMC ZSE30-01-25 Digital Pressure Switch. Inspected, good used condition. Pulled from a working environment. Minor surface soiling on housing. Brass push-in elbow fitting included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $27.20
    Was: $45.00
  • SMC AR30-N03-Z modular pneumatic pressure regulator with gauge and elbow fitting — right-side front view SMC AR30-N03-Z regulator showing gauge, elbow fittings, and body label — left-side rear view

    SMC AR30-N03-Z Modular Air Pressure Regulator w/ Gauge 7-125 PSI 3/8 NPT

    SMC

    $35.00
    Was: $70.00
    SMC AR30-N03-Z Modular Air Pressure Regulator w/ Gauge 7-125 PSI 3/8 NPTThe SMC AR30-N03-Z is a modular pneumatic pressure regulator from SMC's AR30 series, designed to regulate compressed air supply...
    47001
    SKU:
    47001
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    AR30-N03-Z
    MPN:
    AR30-N03-Z
    Type:
    Modular Pneumatic Pressure Regulator
    SKU:
    47001
    Series:
    AR30
    Set Pressure Range:
    7 to 125 PSI (0.05 to 0.85 MPa)
    Port Size:
    3/8 inch NPT
    Gauge Included:
    Yes — SMC dual-scale MPa/PSI gauge
    Gauge Range:
    0 to 160 PSI / 0 to 1.1 MPa
    Valve Included:
    Yes
    Fluid / Media:
    Compressed Air
    Country/Region of Manufacture:
    China
    Certifications:
    RoHS
    Seller Notes:
    Includes integral gauge and valve; clear plastic gauge cover is missing
    Condition Notes:
    SMC AR30-N03-Z modular air pressure regulator inspected and in good used condition. Body and fittings are clean with light wear. Integrated gauge present and intact. Clear plastic gauge cover is missing. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC AR30-N03-Z air pressure regulator front-right view with attached SMC pressure gauge and NPT fittings SMC AR30-N03-Z pneumatic regulator rear-left view showing gauge, body, and brass elbow fitting

    SMC AR30-N03-Z Air Pressure Regulator 7-125 PSI 3/8 NPT with Gauge

    SMC

    $35.00
    Was: $70.00
    SMC AR30-N03-Z Air Pressure Regulator 7-125 PSI 3/8 NPT with GaugeThe SMC AR30-N03-Z is a general-purpose compressed air pressure regulator from SMC's AR series. It reduces and maintains a stable...
    47000
    SKU:
    47000
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    AR30-N03-Z
    MPN:
    AR30-N03-Z
    Type:
    Air Pressure Regulator
    SKU:
    47000
    Set Pressure Range:
    7 ~ 125 PSI
    Port Size:
    3/8 NPT
    Port Configuration:
    IN (port 1), OUT (port 2)
    Gauge Included:
    Yes — SMC analog gauge, 0–160 PSI / 0–1.1 MPa
    Gauge Scale:
    0–160 PSI / 0–1.1 MPa
    Media:
    Compressed Air
    Series:
    AR Series
    Adjustment Type:
    Knob (top-mounted, non-relieving)
    Body Material:
    Metal (zinc die-cast)
    Country/Region of Manufacture:
    China
    Seller Notes:
    Includes attached SMC analog pressure gauge. No additional accessories.
    Condition Notes:
    SMC AR30-N03-Z air pressure regulator inspected and in good used condition. Light surface wear on body; brass gauge elbow shows patina. NPT threads clean. SMC pressure gauge included and intact.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • SMC solenoid valve manifold assembly with 2x VQ1201N-5 and 10x VQ1101N-5 valves and DB-25 port – three-quarter front view SMC VQ1201N-5 VQ1101N-5 solenoid valve manifold – rear three-quarter view showing solenoid coil blocks

    SMC Manifold 2x VQ1201N-5 10x VQ1101N-5 Solenoid Valve Assembly DB-25

    SMC

    $110.00
    Was: $225.00
    SMC Manifold 2x VQ1201N-5 10x VQ1101N-5 Solenoid Valve Assembly DB-25This is an SMC multi-station solenoid valve manifold assembly consisting of 12 valves — 2x VQ1201N-5 and 10x VQ1101N-5 — mounted...
    46716
    SKU:
    46716
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    SMC
    Model:
    VQ1201N-5 / VQ1101N-5
    MPN:
    VQ1201N-5, VQ1101N-5
    Type:
    Solenoid Valve Manifold Assembly
    SKU:
    46716
    Seller Notes:
    Includes manifold with 2x VQ1201N-5 and 10x VQ1101N-5 solenoid valves
    Country/Region of Manufacture:
    Japan
    Number of Stations:
    12
    Valve Qty - VQ1201N-5:
    2
    Valve Qty - VQ1101N-5:
    10
    Pressure Range - VQ1201N-5:
    0.1 – 0.7 MPa
    Pressure Range - VQ1101N-5:
    0.15 – 0.7 MPa
    Control Interface:
    DB-25 (D-Sub 25-pin) data port
    Valve Series:
    VQ1000 Series
    Valve Type:
    5-port directional control solenoid valve
    Mounting Style:
    Manifold / Base Mounted
    Compatible With:
    SMC VQ1000 series valve manifold systems
    Form Factor:
    Manifold Block Assembly
    Condition Notes:
    This SMC VQ1201N-5 / VQ1101N-5 solenoid valve manifold has been inspected and appears to be in good used condition. Shows surface grime from industrial use. DB-25 connector pins intact, all 12 solenoid coils present.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $110.00
    Was: $225.00
  • SMC SYJ512-5MZ-M5-F 3-port solenoid valve with mounting bracket and wired coil connector — left side view showing push-in fittings SMC SYJ512-5MZ-M5-F solenoid valve — front/right angle view showing solenoid body, red indicator dot, and push-in pneumatic fittings

    SMC SYJ512-5MZ-M5-F 3-Port Solenoid Valve 24VDC M5 0.15-0.7MPa w/ Bracket

    SMC

    $22.00
    Was: $40.00
    SMC SYJ512-5MZ-M5-F 3-Port Solenoid Valve 24VDC M5 0.15-0.7MPa w/ BracketSMC 3-port, 2-position directional control solenoid valve for compressed air and pneumatic systems. Operates at 24VDC with M5...
    46700
    SKU:
    46700
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    SMC
    Model:
    SYJ512-5MZ-M5-F
    MPN:
    SYJ512-5MZ-M5-F
    Type:
    3-Port Solenoid Valve
    SKU:
    46700
    Series:
    SYJ500
    Number of Ports:
    3
    Coil Voltage:
    24VDC
    Port Size:
    M5
    Supply Pressure:
    0.15 - 0.7 MPa
    Valve Function:
    3-Port, 2-Position Directional Control
    Actuation Type:
    Solenoid
    Medium:
    Compressed Air / Pneumatic
    Includes:
    Mounting bracket, wired coil connector
    Country/Region of Manufacture:
    Japan
    Seller Notes:
    Includes mounting bracket and wired solenoid coil connector.
    Condition Notes:
    SMC SYJ512-5MZ-M5-F 3-port solenoid valve. Inspected, appears in good used condition. Valve body, push-in fittings, solenoid coil, and wired connector are intact. Mounting bracket included. Normal wear from prior use.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $22.00
    Was: $40.00