Description
SMC CDM2B40-85 CM2 Series Double Acting Pneumatic Cylinder 40mm Bore 85mm
Double acting single rod pneumatic cylinder manufactured by SMC. Converts compressed air pressure into linear motion in both directions, commonly used in automation and industrial machinery.
Specifications & What's Included
- Bore diameter: 40mm
- Stroke length: 85mm + 10mm rod adjustment (95mm total)
- Rod diameter: 9mm
- Maximum operating pressure: 1.0 MPa (10.2 kgf/cm² / 145 PSI)
- Series: CM2
- Includes THK rod end joints on both ends and inline flow control fittings
- Manufactured in Japan
Applications
Double acting cylinders are used throughout industrial automation, assembly machinery, presses, material handling systems, and process equipment. The CM2 series is commonly integrated into larger pneumatic systems for controlled linear actuation. Rod end joints enable mounting to frames and linkages. Flow control fittings regulate speed in both directions.
Condition: Used
This SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder has been inspected and appears to be in good used condition. It was pulled from a working environment where it was actively in use. The stainless cylinder body shows light surface soiling and minor wear consistent with industrial service. Both THK rod end joints are intact and the rubber boots show normal aging. The flow control fittings are present and seated on the port blocks. The cylinder rod appears straight with no visible damage. Please view our photo set and contact us if you have any questions.
This SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder has been inspected and appears to be in good used condition. It was pulled from a working environment where it was actively in use. The stainless cylinder body shows light surface soiling and minor wear consistent with industrial service. Both THK rod end joints are intact and the rubber boots show normal aging. The flow control fittings are present and seated on the port blocks. The cylinder rod appears straight with no visible damage. Please view our photo set and contact us if you have any questions.
Warranty Information
We stand behind every item we sell with a 30-day money-back guarantee. If your item arrives not as described, you may return it within 30 days for a full refund. Please inspect your purchase upon arrival and contact us with any questions.
View AllClose
Additional Information
Brand: |
SMC |
Model: |
CDM2B40-85 |
MPN: |
CDM2B40-85+10-H-7BL3-XB9C10 |
Secondary Model: |
7BL3-XB9C10 |
Type: |
Double Acting Single Rod Pneumatic Cylinder |
Series: |
CM2 |
SKU: |
48734 |
Bore Diameter: |
40mm |
Stroke Length: |
85mm + 10mm (95mm total) |
Rod Diameter: |
9mm |
Max Pressure: |
1.0 MPa / 10.2 kgf/cm² / 145 PSI |
Action Type: |
Double Acting |
Rod Configuration: |
Single Rod |
Included Accessories: |
THK rod end joints (both ends), flow control fittings |
Country/Region of Manufacture: |
Japan |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Includes THK rod end joints on both ends and inline flow control fittings |
Condition Notes: |
This SMC CDM2B40-85 CM2 Series double acting pneumatic cylinder was pulled from a working environment and inspected. Body shows light surface soiling and minor wear. Both THK rod ends intact, flow control fittings present. |
