Industrial

Dynatech 153-004A-16 Dyna-Patch 16-Port Digital Patchbay DB25 Computer Modem

Dynatech

SKU:

39475

Availability:

Usually ships within 1-2 business days.

Weight:

15.00 LBS

Brand:

Dynatech Data Systems

Model:

153-004A-16

MPN:

153-004A-16

Product Name:

Dyna-Patch Digital Patch Module

SKU:

39475

Type:

Digital Patchbay / Patch Panel

Number of Ports:

16 (per side: 16 Computer + 16 Modem DB25)

Connector Type:

DB25 (25-pin D-Sub), Monitor Jacks

Interface Type:

RS-232 / Serial

Form Factor:

Rack Mount, 19-inch, 3U

Front Panel Jacks:

COMP, MODEM, and MON monitor jacks per port

Rear Connector:

High-density multi-pin connector (visible in photos)

Condition:

Used – Pulled from Working Environment

Country/Region of Manufacture:

United States

Seller Notes:

Unit only; no cables included. 16-port digital patchbay.

Condition Notes:

Dynatech 153-004A-16 Dyna-Patch 16-Port Digital Patchbay in good used condition. Chassis is clean with light surface wear. Front jacks and DB25 connectors appear undamaged. Pulled from a working environment.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Scientific Atlanta 7530I L-Band International Video Receiver Rackmount RS-232

Scientific Atlanta

SKU:

39443

Availability:

Usually ships within 1–2 business days.

Weight:

21.00 LBS

Brand:

Scientific-Atlanta

Model:

7530I

MPN:

7530I

Assembly Number:

7530ICFG

Configuration:

AAAA-AA

Type:

L-Band International Satellite Video Receiver

SKU:

39443

Description (Label):

Receiver, L Band Intl

Form Factor:

Rack Mount, 19-inch, 2U

Power Requirements:

90 to 260 VAC, 2A Slo-Blo Fuse

Frequency Band:

L-Band

Interface Type:

RS-232 Remote, SAbus Remote

Video Outputs:

Composite Video, Video 1, Video 2 (BNC)

Monitor Outputs:

VIDEO MON (BNC), IF MON (BNC)

IF Output:

IF OUT (BNC)

IF Loop:

70 MHz Loop (BNC)

Audio Outputs:

SC1 Audio, SC2 Audio, SC3 Audio

LNB Power:

LNB PWR SELECT (V +VDC, H +VDC)

Remote Interfaces:

RS-232 Remote, SAbus Remote, Contact Closure

Port Configuration:

Port 1 Vert, Port 2 Horz

Front Panel:

LCD display, numeric keypad, ALARM, MGC/ADJ indicators

Included Accessories:

19-inch rackmount ears installed

Seller Notes:

Includes installed 19-inch rack ears. Pulled from working earth station.

Country/Region of Manufacture:

United States

Manufacturer Location:

Scientific Atlanta, Network Systems Group, Norcross, GA

Condition:

Used – Pulled from Working Environment

Application:

Earth Station, SATCOM, Satellite Video Downlink

Condition Notes:

Scientific Atlanta 7530I L-Band Video Receiver pulled from a working earth station. Inspected and in good used condition; was in active use. Rack ears installed. Typical field wear. Please contact us with any questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Potter & Brumfield W92-X112-7 Circuit Breaker 7A 277VAC 2-Pole Panel Mount

Potter & Brumfield

SKU:

39420

Availability:

Usually ships within 1-2 business days.

Weight:

1.00 LBS

Brand:

Potter & Brumfield

Model:

W92-X112-7

MPN:

W92-X112-7

Type:

Circuit Breaker

SKU:

39420

Series:

W92

Current Rating:

7A

Voltage Rating:

277VAC MAX

Number of Poles:

2

Frequency:

50/60Hz

Trip Curve:

Curve 2

Mounting Type:

Panel Mount

Certifications:

CSA, UL Listed

Country/Region of Manufacture:

Mexico

Seller Notes:

Pulled from a working environment; unit only, no accessories.

Condition:

Used – Pulled from Working Environment

Condition Notes:

Potter & Brumfield W92-X112-7 2-pole circuit breaker, 7A, 277VAC. Inspected and in good used condition. Pulled from a working environment. Both handles operate smoothly. Normal cosmetic wear.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

CLI Compression Labs Magnitude 410802-01 Multiplexer Modulator Interface DVB

Compression Labs, Inc

SKU:

39417

Availability:

Usually ships within 1–2 business days.

Weight:

8.00 LBS

Brand:

Compression Labs Inc (CLI)

Model:

410802-01

MPN:

410802-01

Secondary Model:

410785-01

Type:

Multiplexer / Modulator Interface

Product Line:

Magnitude

SKU:

39417

Condition:

Used – Inspected

Form Factor:

Rackmount, 1U

Power Requirements:

90–250 VAC, 47–63 Hz, 2A@110V / 1A@220V

Interface Type:

HSSI, EIA-449, DVB, DB9

Ports / Interfaces:

MUX In, Modem Out 1–5, DVB Modem Out, DVB Modem In, HSSI I/O, EIA-449 I/O, EXT OSC

MUX Inputs:

1x MUX In (DB9)

Modem Outputs:

5x Modem Out (DB9): Modem Out 1–5

DVB Interfaces:

DVB Modem Out (DB25), DVB Modem In (DB25)

High-Speed Serial Interface:

HSSI I/O (DB50-style)

Parallel Data Interface:

EIA-449 I/O (DB37)

External Clock:

EXT OSC (BNC)

Status Indicators:

LED array: MUX, DVB, 449, HSS, CLK, PLL, FRM, O.L.

Application:

Video conferencing satellite uplink multiplexing

Country/Region of Manufacture:

United States

Seller Notes:

Unit only; no accessories included. Inspected, good condition.

Condition Notes:

CLI Compression Labs Magnitude 410802-01 Multiplexer/Modulator Interface. Inspected and in good used condition. Chassis clean with light handling scuffs; connectors and LED indicators intact. No significant damage observed.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Leitch IXION Motion Adaptive Standards Converter SDI IXS2 IHB IEO 1U Rackmount

Leitch

SKU:

39410

Availability:

Usually ships within 1-2 business days.

Weight:

25.00 LBS

Brand:

Leitch

Model:

IXION

MPN:

IXION

Type:

Motion Adaptive Standards Converter

SKU:

39410

Form Factor:

1U Rackmount

Option Board 1:

IXS2 – SDI Signal Input/Output

Option Board 2:

IHB – 10-Bit Analog Comb Filter Decoder

Option Board 3:

IEO – Composite Output

Video Standard:

PAL / NTSC / SECAM (standards conversion)

Signal Format Input:

SDI, Composite (CVBS), Y/C (S-Video)

Signal Format Output:

SDI, Composite, Y/C, Black & Burst

Interface / Connectors:

BNC (SDI, Composite, REF), S-Video (Y/C), RS-232, TACS

Serial Interface:

RS-232 (DB9), TACS (DB9)

Front Panel Display:

Green alphanumeric LCD — shows codec mode and firmware version

Firmware Version:

10230201 (visible on front panel display)

Country/Region of Manufacture:

United Kingdom

Condition:

Used – Pulled from Working Environment

Seller Notes:

Includes IXS2, IHB, and IEO option boards installed. No manual included.

Compatible With:

Broadcast SDI, composite, and Y/C video systems; PAL/NTSC/SECAM

Application:

Broadcast Television, Post-Production, Standards Conversion

Condition Notes:

Leitch IXION Standards Converter — used, pulled from a working broadcast environment where it was in active use and functional. Good cosmetic condition, light rack wear. All three option boards (IXS2, IHB, IEO) installed.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

WV Communications 70-01FM-CH FM Modulation Sensitivity Adjust 70MHz RF

SKU:

39369

Availability:

Usually ships within 1-2 business days.

Weight:

6.00 LBS

Brand:

WV Communications

Model:

70-01FM-CH

MPN:

70-01FM-CH

Secondary Model:

70MDF-FM-BRZ

SKU:

39369

Type:

FM Modulation Sensitivity Adjust Unit

Frequency:

70 MHz

RF Output Connector:

BNC (J2)

Tone Input Connector:

BNC (J1)

Control Interface:

DB9 (J4)

AC Input Connector:

IEC C14 (J3)

Power Requirements:

115 VAC, 1-Phase, 47-63Hz, 1A

Fuse:

1A SB

Front Panel Indicators:

AC PWR ON (green LED), FAULT (red LED)

Front Panel Controls:

FM Modulation Sensitivity Adjust (rotary trim pot)

Power Switch:

Rear-panel rocker switch (AC ON / AC OFF, SW1)

Form Factor:

Benchtop / Rackmount enclosure

Condition:

Used – Inspected

Seller Notes:

Unit only; no accessories included.

Country/Region of Manufacture:

United States

Condition Notes:

WV Communications 70-01FM-CH FM Modulation Sensitivity Adjust. Inspected and in good used condition. Clean enclosure with minor surface wear. Front panel controls and rear BNC/DB9 connectors intact. No damage observed.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Dynetcom 153-004B-16 Dyna-Patch Mark-1 16-Channel Patching Module 12 CKT

Dynetcom

SKU:

39342

Availability:

Usually ships within 1-2 business days.

Weight:

5.00 LBS

Brand:

Dynetcom

Model:

153-004B-16

MPN:

153-004B-16

Secondary Model:

Dyna-Patch Mark-1

Type:

16-Channel Rackmount Patching Module

SKU:

39342

Number of Channels:

16

Number of Circuits:

12

Connector Type:

DB25 (25-pin D-Sub)

Form Factor:

Rack Mount

Rack Units:

2U

Interface Type:

DB25 single-hole monitoring ports

Application:

Modem, computer port, and data test circuit access

Management Type:

Passive / Monitoring

Country/Region of Manufacture:

United States

Condition:

Used – Pulled from Working Environment

Seller Notes:

Unit only; pulled from working environment where it was in active use.

Condition Notes:

Dynetcom Dyna-Patch Mark-1 153-004B-16 patching module inspected and in good used condition. Pulled from a working environment where it was in active use and functional. DB25 connectors intact. Normal light wear.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Rockwell 8548-00 Power Supply w/ 2 Wescom 401 Wire Line Amplifiers 24/48VDC

Rockwell

SKU:

39339

Availability:

Usually ships within 1-2 business days.

Weight:

18.00 LBS

Brand:

Rockwell

Model:

8548-00

MPN:

8548-00

Secondary Model:

Wescom 401

Type:

DC Power Supply with Wire Line Amplifier Modules

SKU:

39339

Input Voltage:

105-130VAC

Input Frequency:

60Hz

Input Power:

95 Watts

Output Voltage:

24VDC or 48VDC (selectable)

Output Current:

1.25 Amps

Number of Amplifier Modules:

2

Amplifier Module Model:

Wescom 401 Wire Line Amplifier

Fuse Rating:

1.5A Slo-Blo

Output Selector:

24V / 48V switchable via rear panel switch

Form Factor:

Modular / Benchtop Stack

Application:

Telephone carrier / wireline telecom systems

Condition:

Used – Inspected and in Good Condition

Seller Notes:

Includes Rockwell 8548-00 power supply and qty 2 Wescom 401 wire line amplifier modules

Country/Region of Manufacture:

United States

Condition Notes:

Rockwell 8548-00 Power Supply with 2 Wescom 401 Wire Line Amplifiers. Inspected, in good used condition. Minor surface wear on chassis. AC power cord included. Both amplifier modules present.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

WV Communications 70-01FD-CH 19" Rackmount 70 MHz FM Modulator RF/IF Demodulator

WV Communications

SKU:

39331

Availability:

Usually ships within 1-2 business days.

Weight:

21.00 LBS

Brand:

WV Communications

Model:

70-01FD-CH

MPN:

70-01FD-CH

Secondary Model:

70-01FM-CH

Type:

19" Rackmount FM Modulator / RF-IF Demodulator Chassis

SKU:

39331

Condition:

Used – Inspected

Seller Notes:

Includes 70MDF-FM-BRZ 70 MHz FM Modulator and RF/IF-DEM-PANAM Demodulator modules

Form Factor:

19" Rackmount

Number of Modules:

2

Module 1 Part Number:

70MDF-FM-BRZ

Module 1 Description:

70 MHz FM Modulator

Module 2 Part Number:

RF/IF-DEM-PANAM

Module 2 Description:

RF/IF Demodulator

Center Frequency:

70 MHz (69.6 / 70.0 MHz selectable)

Modulation Type:

FM (Frequency Modulation)

Power Requirements:

115 VAC, 1-Phase, 47-63 Hz

Fuse Rating:

1A SB

Front Panel Indicators:

AC PWR ON (green LED), FAULT (red LED)

Front Panel Controls:

FM Modulation Sensitivity Adjust; FM Demod Output Level Adjust

RF Input Frequency Select:

69.6 MHz / 70.0 MHz

Tone Monitor Connector:

BNC (front panel, demodulator module)

Rear Connectors – Demodulator:

J1 RF Input (BNC), J2 Tone Output (BNC), J3 AC Input (IEC), J4 (DB9)

Rear Connectors – Modulator:

J1 Tone Input (BNC), J2 RF Output (BNC), J3 AC Input (IEC), J4 (DB9)

AC Power Switch:

SW1 rocker switch (AC ON / AC OFF) per module

Country/Region of Manufacture:

United States

Condition Notes:

WV Communications 70-01FD-CH rackmount chassis inspected and in good condition. Both modules present: 70 MHz FM Modulator (70MDF-FM-BRZ) and RF/IF Demodulator (RF/IF-DEM-PANAM). Light rack wear. Contact us with questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Decom Systems DSI 7376 PSK/PCM Bit Synchronizer PSK Demodulator Rackmount

Decom Systems

SKU:

39320

Availability:

Usually ships within 1-2 business days.

Weight:

18.00 LBS

Brand:

Decom Systems Inc.

Model:

7376

MPN:

7376-41000-012

Secondary Model:

010226-1F EVO-0380 EVO-0491

Type:

PSK/PCM Bit Synchronizer & PSK Demodulator

SKU:

39320

Form Factor:

Rackmount (2U)

Application:

Telemetry Data Acquisition, Aerospace/Defense

Signal Type:

PSK, PCM

PCM Codes Supported:

NRZ-L, NRZ-M, NRZ-S, Bi-Phase-L, Bi-Phase-M, PN

Carrier Frequency:

32 kHz

Bit Rate Range:

1 kbps – 4.8 kbps (BR1–BR6 selectable)

Bandwidth Settings:

BW1: 750 Hz, BW2: 1.5 kHz, BW3: 3 kHz, BW4: 6 kHz

Loop Setting:

1% / 0.1% selectable

Input Bandwidth Control:

Narrow / Wide switchable

Input Source:

1 / 2 selectable

Front Panel Outputs (Test):

Bit Sync / Data In, Data Out, Clock Out (BNC)

Rear Panel Connectors:

J1–J13 BNC: Demod In 1/2, Bit Sync Ext In, NRZL Out, Clock Out, Demod Status Out, Bit Sync Status Out, Bib Tape Out, PN Tape Out

Power Input Select:

S1 switch: 115V / 230V / 0.5A (rear panel)

Grounds:

Signal Ground (J12), Chassis Ground (J13) on rear

Country/Region of Manufacture:

United States

Seller Notes:

Unit only; no manual or accessories included.

Condition:

Used – Inspected, appears in good condition

Condition Notes:

Decom Systems DSI 7376 PSK/PCM Bit Synchronizer has been inspected and appears in good used condition. Front panel controls and BNC connectors intact. Normal cosmetic wear. PanamSat/PAS Capital asset tags present. Please contact us with questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E Card 802.11a/b/g Sony NR

Intel

SKU:

39315

Availability:

Usually ships within 1-2 business days.

Weight:

1.00 LBS

Brand:

Intel

Model:

WM3945ABG

MPN:

WM3945ABG MOW1

Type:

Mini PCI-E Wireless Network Adapter

SKU:

39315

Wireless Standard:

IEEE 802.11a, 802.11b, 802.11g

Interface:

Mini PCI Express (Mini PCI-E)

Form Factor:

Mini PCI-E Card

FCC ID:

PD9WM3945ABG

IC:

1000M-3945ABG

Compatible With:

Sony NR Series Notebook

Country/Region of Manufacture:

China

Condition:

Used – Pulled from Working Environment

Seller Notes:

Card only; pulled from a Sony NR series notebook. No cables or accessories.

Condition Notes:

Intel WM3945ABG PRO/Wireless 3945ABG Mini PCI-E card. Pulled from a working Sony NR series notebook. Inspected and in good condition. Clean connector edge, normal light wear.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Unbranded Manual X/Y Stage Cross Slide Table Milling Drilling Machine Tool

Generic

SKU:

39312

Availability:

Usually ships within 1-2 business days.

Weight:

25.00 LBS

Brand:

Unbranded

Model:

Manual X/Y Cross Slide Stage

Type:

Manual X/Y Cross Slide Positioning Stage

SKU:

39312

Condition:

Used – Inspected and Tested

Axes:

2 (X and Y)

Adjustment Type:

Manual – Cross-knob feed screws

Construction Material:

Cast Iron

Compatible With:

Drill Press, Milling Machine, Bench Mill

Mounting:

Bolt-down base with mounting holes

Seller Notes:

Surface rust present; unit otherwise mechanically intact

Form Factor:

Benchtop / Machine Mount

Condition Notes:

Used unbranded manual X/Y cross slide stage. Inspected and appears to be in working condition. Surface rust present on base, bracket, and body. Feed screws and knobs intact. Please view photos.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Nikon AFX-IIA Microscope Camera Shutter Assembly Controller w/ Eyepiece

Nikon

SKU:

39258

Availability:

Usually ships within 1-2 business days.

Weight:

4.00 LBS

Brand:

Nikon

Model:

AFX-IIA

MPN:

AFX-IIA

Type:

Microscope Camera Shutter Assembly and Controller

SKU:

39258

Condition:

Used – Pulled from Working Environment

Seller Notes:

Includes shutter assembly, controller body, and eyepiece

Country/Region of Manufacture:

Japan

Form Factor:

Benchtop / Microscope Attachment

Application / Use Case:

Photomicrography, scientific imaging, microscope camera control

Interface / Connector Type:

Multi-pin D-sub style connector (rear)

Compatible With:

Nikon research microscopes (Optiphot, Labophot series)

Components Included:

Shutter assembly body, eyepiece, controller housing

Condition Notes:

Nikon AFX-IIA Microscope Shutter Assembly and Controller. Inspected, pulled from a working environment. Light surface marks and minor scuffs from lab use. Eyepiece and internal optics appear clean and clear. Rear multi-pin connector intact.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Taber Teledyne Type 176 Electrical Pressure Transmitter 0-2000 PSI 350 Ohms

Teledyne Taber

SKU:

39249

Availability:

Usually ships within 1-2 business days.

Weight:

4.00 LBS

Brand:

Taber Instrument Corporation

Model:

Type 176

MPN:

176

Type:

Electrical Pressure Transmitter

SKU:

39249

Pressure Range:

0-2000 PSI

Output:

Current (Current Calibrated)

Resistance:

350 Ohms

Calibration:

Current Calibrated

Serial Number (Label):

581732

Manufacturer Location:

North Tonawanda, N.Y., U.S.A.

Country/Region of Manufacture:

United States

Body Material:

Stainless Steel

Connector Type:

Multi-pin circular connector (male)

Application:

Aerospace, Industrial, High-Pressure Fluid Systems

Media Compatibility (Label):

Liquid Fluorine (per label on unit)

Condition:

Used – Pulled from Working Environment

Seller Notes:

Unit only; no additional accessories included.

Condition Notes:

Taber Teledyne Type 176 Pressure Transmitter, 0-2000 PSI, pulled from a working environment and inspected. Stainless body shows typical service wear; multi-pin connector present with pins intact. Nameplate fully legible. Used condition.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Teledyne Taber 217 Pressure Transducer 0-200 PSI Bonded Strain Gage

Teledyne Taber

SKU:

39248

Weight:

4.00 LBS

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Precise Sensors 111-2-1000-01-G-35-10-B6 Pressure Transducer 0-1000 PSIG

Precise Sensors

SKU:

39242

Availability:

Usually ships within 1-2 business days.

Weight:

1.00 LBS

Brand:

Precise Sensors

Model:

111-2-1000-01-G-35-10-B6

MPN:

111-2-1000-01-G-35-10-B6

Type:

Pressure Transducer

SKU:

39242

Pressure Range:

0-1000 PSIG

Pressure Type:

Gauge (PSIG)

Output Connector:

6-pin circular connector

Process Connection:

Male threaded port (front)

Body Material:

Stainless Steel

Manufacturer Location:

Monrovia, CA 91016

Country/Region of Manufacture:

United States

Form Factor:

Inline / In-line body

Condition:

Used – Inspected and Pulled from Working Environment

Seller Notes:

Transducer only; no additional accessories included.

Condition Notes:

Precise Sensors 111-2-1000-01-G-35-10-B6 0-1000 PSIG pressure transducer. Inspected; good used condition. Stainless body shows minor scuffing. Connector pins clean and intact. No damage to process port or body.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Tokki Cooke TP-125mk2 Pump Timer Peristaltic Foot Pedal AC 100V 1A

Cooke

SKU:

39223

Availability:

Usually ships within 1-2 business days.

Weight:

22.00 LBS

Brand:

Tokki Corporation

Model:

TP-125mk2

MPN:

TP-125mkII

Type:

Peristaltic Pump Timer

SKU:

39223

Condition:

As-Is / For Parts or Not Working

Seller Notes:

Includes Linemaster Treadlite II foot pedal switch (Cat T-91-S)

Country/Region of Manufacture:

Japan

Power Requirements:

AC 100V, 1A

Fuse Rating:

1A

Timer Controls:

OFF timer (Short-Long), ON timer (Short-Long)

Pump Switch:

ON/OFF toggle on rear panel

Foot Switch Included:

Yes — Linemaster Treadlite II, Cat T-91-S

Foot Switch Ratings:

15A 125V / 10HP 125-250V, NEMA & UL Enclosure Type 1

Drive Mechanism:

Motor-driven peristaltic/tubing pump with belt drive

Form Factor:

Benchtop

Compatible With:

Cooke / Tokki spin coating or fluid dispensing systems

Application:

Fluid dispensing, spin coating, laboratory pump timing

Condition Notes:

Tokki Cooke TP-125mk2 Pump Timer sold as-is for parts/repair. Power turns on; foot pedal activates mechanism. Pump did not respond — needs tubing threaded. Not fully tested, not guaranteed functional. Includes Linemaster foot pedal.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Cooke Tokki TP-125 MK III Automatic Fiber Optic Cable Cleaner w/ Foot Pedal

Cooke / Tokki

SKU:

39222

Availability:

Usually ships within 1-2 business days.

Weight:

22.00 LBS

Brand:

Cooke Corporation / Tokki Corporation

Model:

TP-125 MK III

MPN:

TP-125MKIII

Type:

Automatic Fiber Optic Cable Cleaner

SKU:

39222

Seller Notes:

Includes foot switch (Kokusai Dengyo SFK-1, AC 250V 6A)

Country/Region of Manufacture:

Japan

Manufacturer:

Tokki Corporation, Tokyo Japan

Sold and Serviced By:

The Cooke Corporation, Auburn Hills, MI

Power Requirements:

100 VAC Input Only

Foot Switch Model:

Kokusai Dengyo SFK-1

Foot Switch Rating:

AC 250V 6A

Foot Switch Part Number:

41-22030

Manufacture Date:

2000-05-20

Application:

Fiber optic cable end-face cleaning and polishing

Form Factor:

Benchtop

Condition:

Used – Partial Function Verified

Compatible With:

Fiber optic cable connectors; telecommunications and lab use

Condition Notes:

Cooke Tokki TP-125 MK III Fiber Optic Cleaner powers on; foot pedal activates mechanism. Full function not verified — sold as-inspected. Cosmetically good. Foot switch included. Please view photos and contact us with questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Tele-Path Industries 108-DS1 DS1 Test Access Module ESF B8ZS AMI TPI w/ Case

Tele-Path Industries

SKU:

39217

Availability:

Usually ships within 1-2 business days.

Weight:

3.00 LBS

Brand:

Tele-Path Industries

Model:

108-DS1

MPN:

108-DS1

SKU:

39217

Type:

DS1 Test Access Module

Condition:

Used – Inspected

Seller Notes:

Includes gray TPI branded carry case

Form Factor:

Portable / Handheld

Country/Region of Manufacture:

United States

Interface Type:

DS1 / T1

Line Coding:

ESF, SF, B8ZS, AMI, DDS, VF, SLC1

Signal Access:

East (Primary) and West (Aux.) TX/RX

Function:

Drop & Insert, DS1 Signal Monitoring

Signaling:

A, B, C, D Signaling Bits with LED indicators

Channel Selection:

Up/Down Channel buttons with LED display

Connector Type:

Mini DIN power, bantam jacks (DS1 access)

Compatible With:

T1/DS1 circuits, East/West span access

Includes:

Gray TPI carry case

Condition Notes:

Tele-Path Industries 108-DS1 DS1 Test Access Module inspected and in good used condition. Blue enclosure shows light wear. All front-panel controls and ports appear intact. Includes gray TPI carry case. Please contact us with any questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov

Spectra Physics 960RD POS Scale Display IBM 4683 Point of Sale w/ Cable

Spectra Physics

SKU:

39208

Availability:

Usually ships within 1-2 business days.

Weight:

3.00 LBS

Brand:

Spectra-Physics

Model:

960RD

MPN:

960RD

Type:

POS Scale Display / Scale Head

SKU:

39208

Compatible With:

IBM 4683 Point-of-Sale System

Capacity:

30 x 0.01 lb / 15 x 0.005 kg

Display Type:

LCD

Operating Temperature:

10°C to 40°C

Max Division (n max):

3000

Connector Type:

Proprietary flat ribbon cable with locking connector

Includes:

Scale display unit and connecting cable

Mount Type:

Post mount (no post or base included)

Condition:

Used – Pulled from Working Environment

Seller Notes:

Includes the 960RD display module and original connecting cable; no post or base included.

Country/Region of Manufacture:

United States

Condition Notes:

Spectra-Physics 960RD POS Scale Display inspected and in good used condition. Pulled from a working retail environment. Includes connecting cable; no post or base. Please view photos and contact us with questions.

California Prop 65 Warning:

WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov