Description
Taber Teledyne Type 176 Electrical Pressure Transmitter 0-2000 PSI 350 Ohms
Electrical pressure transmitter designed to measure and convert fluid pressure into electrical signals. Current-calibrated output device with stainless steel construction, rated for pressures up to 2000 PSI.
Specifications & What's Included
- Model: Type 176 | MPN: 176
- Pressure Range: 0-2000 PSI
- Output: Current (Current Calibrated)
- Resistance: 350 Ohms
- Body Material: Stainless Steel
- Connector: Multi-pin circular connector (male)
- Serial Number: 581732
- Manufacturer: Taber Instrument Corporation, North Tonawanda, N.Y., U.S.A.
- Unit only; no accessories included
Applications
This transmitter type was used in aerospace, industrial, and high-pressure fluid systems where remote pressure monitoring and electrical signal transmission were required. Compatible with liquid fluorine systems per the unit's original labeling. Suitable for retrofit applications in industrial equipment and fluid control systems requiring current-output pressure measurement.
This Taber Teledyne Type 176 Electrical Pressure Transmitter has been inspected and appears to be in good used condition. It was pulled from a working environment where it was in active use. The stainless steel body shows typical surface wear, light scuffing, and minor discoloration consistent with service use. A yellow "Liquid Fluorine" service label is affixed to the lower clamp band. The multi-pin circular connector is present and the pins appear intact, though some dirt and residue are visible in and around the connector housing. The nameplate label is intact and fully legible, confirming Type 176, Range 0-2000 PSI, 350 Ohms, Current Calibrated, Serial 581732. Please view our photo set and contact us if you have any questions. Please note: We have multiple units in stock — yours may not be the one shown in the photos, however, it will be similar in condition and function.
Warranty Information
Additional Information
Brand: |
Taber Instrument Corporation |
Model: |
Type 176 |
MPN: |
176 |
Type: |
Electrical Pressure Transmitter |
SKU: |
39249 |
Pressure Range: |
0-2000 PSI |
Output: |
Current (Current Calibrated) |
Resistance: |
350 Ohms |
Calibration: |
Current Calibrated |
Serial Number (Label): |
581732 |
Manufacturer Location: |
North Tonawanda, N.Y., U.S.A. |
Country/Region of Manufacture: |
United States |
Body Material: |
Stainless Steel |
Connector Type: |
Multi-pin circular connector (male) |
Application: |
Aerospace, Industrial, High-Pressure Fluid Systems |
Media Compatibility (Label): |
Liquid Fluorine (per label on unit) |
Condition: |
Used – Pulled from Working Environment |
Seller Notes: |
Unit only; no additional accessories included. |
Condition Notes: |
Taber Teledyne Type 176 Pressure Transmitter, 0-2000 PSI, pulled from a working environment and inspected. Stainless body shows typical service wear; multi-pin connector present with pins intact. Nameplate fully legible. Used condition. |
California Prop 65 Warning: |
WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov |