Electronic Test

Electronic Test

Electronic test is a category focused on evaluating the functionality and performance of electronic devices. This includes testing methods such as automated testing, manual testing, and simulation to ensure that electronic components meet quality standards and specifications. Electronic test equipment like oscilloscopes, multimeters, and signal generators are commonly used to measure and analyze electronic signals. This category covers a wide range of industries including telecommunications, automotive, aerospace, and consumer electronics. Whether testing PCBs, integrated circuits, or electronic systems, Electronic Test plays a crucial role in verifying the proper operation and reliability of electronic devices.

  • Motorola SGLF1060A Microcite Scan XPA Transceiver Line Card – top cover view showing gold-tan enclosure with carry handle Motorola SGLF1060A Microcite Scan XPA Transceiver Line Card – angled rear view showing multi-pin edge connector

    Motorola SGLF1060A Microcite Scan XPA Transceiver Line Card Micro CITE

    Motorola

    $175.00
    Was: $350.00
    Motorola SGLF1060A Microcite Scan XPA Transceiver Line Card Micro CITE C25HDM01H7AF Transceiver line card module for Motorola Microcite base stations. Handles RF transceiver functionality within the...
    12201
    SKU:
    12201
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    7.00 LBS
    Brand:
    Motorola
    Model:
    SGLF1060A
    MPN:
    SGLF1060A
    Secondary Model:
    449UY02T4
    SKU:
    12201
    Type:
    Transceiver Line Card
    Compatible With:
    Motorola Microcite Base Station C25HDM01H7AF
    Product Line:
    Microcite Scan XPA
    Application:
    Cellular Base Station / Cell Site
    Form Factor:
    Card / Module
    Condition:
    Used – Pulled from Working Environment
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Pulled from Motorola C25HDM01H7AF Microcite base station. Card only.
    Condition Notes:
    Motorola SGLF1060A Microcite Scan XPA Transceiver Line Card pulled from a C25HDM01H7AF Microcite base station. Visually inspected; shows typical field wear with minor chassis oxidation. Connectors appear intact. Card only.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • TDK ZUG2206-11 Power Line Noise Filter – front view showing IEC C14 inlet and label with model number and specs TDK ZUG2206-11 Noise Filter – top label detail showing 250V 6A 50/60Hz specs, circuit diagram, L-500µH and capacitor values

    TDK ZUG2206-11 Power Line Noise Filter IEC Inlet 250V 6A 50/60Hz EMI

    TDK

    $12.00
    Was: $25.00
    TDK ZUG2206-11 Power Line Noise Filter IEC Inlet 250V 6A 50/60Hz EMISingle-phase power line EMI filter designed to suppress conducted noise on AC mains. Panel-mount module with IEC C14 inlet...
    12117
    SKU:
    12117
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    TDK
    Model:
    ZUG2206-11
    MPN:
    ZUG2206-11
    Type:
    Power Line Noise Filter / EMI Filter with IEC Inlet
    SKU:
    12117
    Voltage Rating:
    250V AC
    Current Rating:
    6A
    Frequency:
    50/60Hz
    Inductance:
    L-500µH
    X Capacitance:
    X2-0.047µF
    Y Capacitance:
    Y-2x2200pF
    Inlet Connector Type:
    IEC C14
    Filter Configuration:
    Single Phase
    Certifications:
    UL Listed
    Country/Region of Manufacture:
    Japan
    Form Factor:
    Panel Mount / Power Entry Module
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only — no additional accessories included.
    Condition Notes:
    TDK ZUG2206-11 Power Line Noise Filter in good used condition. Housing shows minor scuffs from prior use. IEC inlet and solder terminals intact. Label fully legible. Pulled from a working environment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $12.00
    Was: $25.00
  • Catel VFMM-2000 Video FM Modulator — front panel showing Deviation knob, Power switch, and VU meter on green face plate Catel VFMM-2000 Video FM Modulator — rear panel showing BNC Output, BNC Input, -DC, +DC connectors and Output Level adjustment

    Catel VFMM-2000 Video FM Modulator 219-265 MHz Cable TV CATV RF

    Catel

    $60.00
    Was: $125.00
    Catel VFMM-2000 Video FM Modulator 219-265 MHz Cable TV CATV RFThe Catel VFMM-2000 is a Video FM Modulator designed for cable television (CATV) headend applications. It accepts a baseband video input...
    9992
    SKU:
    9992
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    3.00 LBS
    Brand:
    Catel
    Model:
    VFMM-2000
    MPN:
    VFMM-2000
    Type:
    Video FM Modulator
    SKU:
    9992
    Frequency Range:
    219 to 265 MHz
    Tuned Frequency (Unit Label):
    249 MHz
    Application:
    Cable Television (CATV) Headend
    Signal Type:
    FM Video / RF
    Connectors:
    BNC (Input, Output, -DC, +DC)
    Front Panel Controls:
    Deviation knob, Power switch, Deviation VU meter
    Rear Panel Controls:
    Output Level adjustment
    Form Factor:
    Benchtop / Rack-mount module
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only — no accessories included. Tuned to 249 MHz.
    Condition Notes:
    Catel VFMM-2000 Video FM Modulator, used, inspected. Shows light surface scuffs on aluminum housing. Not powered or tested at our facility. Tuned to 249 MHz per rear label. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $60.00
    Was: $125.00
  • Catel PS-2500B Power Supply – front panel showing POWER toggle switch and three banana jack outputs labeled +12.6V, GND, and -15V Catel PS-2500B Power Supply – rear panel showing AC rating label: 110-125VAC 0.5A, 220-250VAC 0.25A, 48-62Hz, with -15V DC and +12.6V DC output terminals and attached AC cord

    Catel PS-2500B Power Supply for Video Modulator +12.6V -15V DC 110-250VAC

    Catel

    $65.00
    Was: $125.00
    Catel PS-2500B Power Supply for Video Modulator +12.6V -15V DC 110-250VACThe Catel PS-2500B is a compact dual-output DC power supply designed to power Catel video modulator equipment. It provides two...
    9991
    SKU:
    9991
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    5.00 LBS
    Brand:
    Catel
    Model:
    PS-2500B
    MPN:
    PS-2500B
    SKU:
    9991
    Type:
    Dual-Output DC Power Supply
    Input Voltage:
    110–125VAC @ 0.5A; 220–250VAC @ 0.25A
    Input Frequency:
    48–62 Hz
    Output Voltage:
    +12.6V DC and -15V DC
    Number of Outputs:
    2
    Output Connectors:
    Banana jacks (red +12.6V, black GND, purple -15V)
    Input Connector:
    Standard AC line cord (NEMA 5-15P)
    Compatible With:
    Catel Video Modulators
    Form Factor:
    Desktop / Benchtop
    Country/Region of Manufacture:
    United States
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; includes attached AC line cord.
    Condition Notes:
    Catel PS-2500B Power Supply inspected and in good used condition. Minor scuffing on enclosure; all outputs and switch intact. Attached AC cord included. Pulled from a working environment. Contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Franklin Electric Model 3500 Power Line Disturbance Monitor front panel view showing LED display, threshold knobs, alarm indicator, display select and monitor select switches, and chart recorder slot Franklin Electric 3500 front panel close-up showing Threshold Settings knobs (Under, Over, Transient), Alarm LED, Memory Clear button, Display Select rotary switch, Monitor Select rotary switch, Clock interval selector, and Power switch

    Franklin Electric 3500 Power Line Disturbance Monitor Chart Recorder 100/200V

    Franklin Electric

    $250.00
    Was: $500.00
    Franklin Electric 3500 Power Line Disturbance Monitor Chart Recorder 100/200VBenchtop power quality monitoring instrument with integrated thermal chart recorder. Monitors three-phase power lines for...
    9631
    SKU:
    9631
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    50.00 LBS
    Brand:
    Franklin Electric
    Model:
    3500
    MPN:
    3500
    Type:
    Power Line Disturbance Monitor with Chart Recorder
    SKU:
    9631
    Seller Notes:
    Unit includes built-in thermal chart recorder and power/monitor cables visible in photos.
    Country/Region of Manufacture:
    United States
    Form Factor:
    Benchtop
    Power Requirements:
    100/200V AC, 1A/1A, Single Phase, 50/60Hz
    Voltage Rating:
    100/200V
    Current Rating:
    1A / 1A
    Phase:
    Single Phase (1Ø)
    Frequency:
    50/60 Hz
    Measurement Type:
    Power Line Disturbance / Power Quality
    Monitor Inputs:
    Phase 1, Phase 2, Phase 3 (3 monitor input terminals, rear)
    Threshold Settings:
    Under, Over, and Transient — independently adjustable
    Display Type:
    LED numeric display + built-in thermal chart recorder
    Display Select:
    Transient, Over, Under, Phase 1, Phase 2, Phase 3, Time
    Monitor Select:
    Phase 1, Phase 2, Phase 3, All Phases, 3-Phase Power
    Clock Intervals:
    1 Hr, 10 Hr, 1 Day, 10 Day, 100 Day; 10 Min, 1 Min, 10 Sec, 1 Sec, Run
    Printout Format:
    Status Printout and Disturbance Printout with event codes
    Rear Connectors:
    DB-25 Monitor Output, multi-pin circular connectors, input terminals
    Manufacturer Division:
    Franklin Electric — Programmed Power Division, Sunnyvale CA
    Condition:
    Used – Inspected, Pulled from Working Environment
    Condition Notes:
    Franklin Electric 3500 Power Line Disturbance Monitor in good used condition. Shows light handling wear; cabinet and controls intact. Rear phase cables present. Not powered or tested at our facility; pulled from a working environment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • Kessler-Ellis KEP 476666-1 electromechanical counter front panel view showing 5-digit drum display reading 00000 with panel mounting bracket KEP 476666-1 counter rear view showing Kessler-Ellis Products label, add and subtract terminal connections, and driver PCB with visible corrosion on housing

    Kessler-Ellis KEP 476666-1 Electromechanical Counter Bell & Howell Driver Board

    Kessler-Ellis Products

    $25.00
    Was: $50.00
    Kessler-Ellis KEP 476666-1 Electromechanical Counter Bell & Howell Driver BoardA 5-digit electromechanical totalizing counter with integrated Bell & Howell footage driver board. Designed for panel...
    9623
    SKU:
    9623
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    Kessler-Ellis Products
    Model:
    476666-1
    MPN:
    476666-1
    Type:
    Electromechanical Totalizing Counter
    SKU:
    9623
    Display Type:
    5-Digit Mechanical Drum / Odometer Style
    Number of Digits:
    5
    Counting Mode:
    Add / Subtract
    Form Factor:
    Panel Mount
    Driver Board:
    Bell & Howell Footage Driver, Assy 476666-1
    Application:
    Footage / Yardage Counting, Industrial Totalization
    Condition:
    Used – Inspected
    Seller Notes:
    Includes integrated Bell & Howell driver board (Assy 476666-1).
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Kessler-Ellis KEP 476666-1 electromechanical counter. Used condition. Surface rust on rear housing. 5-digit display intact. Bell & Howell driver board present. Not bench-tested — sold as inspected. See photos.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $25.00
    Was: $50.00
  • IECH DT-60C/PD Radiac Detector badge original box label showing FSN 6665-892-4421, MIL-D-0016153E, NOBsr-89291, quantity 10, and serial number range IECH DT-60C/PD Radiac Detector badge – closed black circular housing showing top face with embossed text and attachment tab

    IECH DT-60C/PD Radiac Detector Badge MIL-D-0016153E FSN 6665-892-4421 Box/10

    IECH

    $20.00
    Was: $40.00
    IECH DT-60C/PD Radiac Detector Badge MIL-D-0016153E FSN 6665-892-4421 Box/10 The IECH DT-60C/PD is a military-specification radiac detector badge designed for individual ground troop issue...
    9447
    SKU:
    9447
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    2.00 LBS
    Brand:
    IECH (Industrial Electric Hardware Corp)
    Model:
    DT-60C/PD
    MPN:
    DT-60C/PD
    FSN:
    6665-892-4421
    Patent Number:
    3100262
    Military Specification:
    MIL-D-0016153E
    NOBsr (Order Number):
    NOBsr-89291
    Type:
    Radiac Detector Badge / Dosimeter
    Quantity per Box:
    10
    Intended User:
    Military Ground Troops
    Detection Type:
    Radiation (Radiac)
    Technology:
    Photoluminescent Dosimeter
    Condition:
    New Old Stock (NOS)
    Country/Region of Manufacture:
    United States
    SKU:
    9447
    Seller Notes:
    Box of 10 NOS badges; serial number range 15591 thru 15910 per box label.
    Condition Notes:
    These IECH DT-60C/PD Radiac Detector Badges are new old stock (NOS), supplied in the original military-issue box. The box label is intact and legible, showing FSN 6665-892-4421, MIL-D-0016153E, NOBsr-89291, and a serial number range of 15591 through
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Catel VFMM-2000 Video FM Modulator front panel showing Deviation control knob, Power toggle switch, analog Deviation meter, and engraved CATEL VFMM-2000 label Catel VFMM-2000 rear panel showing BNC coaxial Output and Input ports, -DC and +DC Output Level controls, and VFMM-2000 219 MHz System 2 label

    Catel VFMM-2000 Video FM Modulator 219 MHz BNC Coax Input Output System 2

    Catel

    $75.00
    Was: $150.00
    Catel VFMM-2000 Video FM Modulator 219 MHz BNC Coax Input Output System 2The VFMM-2000 is a video FM modulator used to convert baseband video signals to a frequency-modulated RF output at 219 MHz...
    9388
    SKU:
    9388
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Catel
    Model:
    VFMM-2000
    MPN:
    VFMM 2000
    Type:
    Video FM Modulator
    SKU:
    9388
    Frequency:
    219 MHz
    System Configuration:
    System 2
    Connector Type:
    BNC, Coaxial
    Input Type:
    BNC, Coaxial
    Output Type:
    BNC, Coaxial
    Output Level Control:
    -DC / +DC Output Level Adjustment
    Front Panel Controls:
    Deviation control, Power switch, Deviation meter
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only, no accessories. Cables visible in photos not included.
    Condition:
    Used – Pulled from Working Environment
    Form Factor:
    Benchtop / Rackmount Module
    Condition Notes:
    This Catel VFMM-2000 Video FM Modulator has been inspected and appears to be in good used condition. Pulled from a working environment. Light surface wear on the enclosure. Ports and controls intact. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Catel CA-2100 dual video FM modulator rack front view showing two VFMM-2000 modules in 2U rackmount chassis with power cord Catel PS-2500A power supply panel showing +12.6V, GND, and -15V DC output binding posts and power switch

    Catel CA-2100 Dual Video FM Modulator Rack VFMM-2000 w/ PS-2500A 110-250VAC

    Catel

    $75.00
    Was: $150.00
    Catel CA-2100 Dual Video FM Modulator Rack VFMM-2000 w/ PS-2500A 110-250VACDual-channel video FM modulator rack unit designed for broadcast and telecom applications. Converts baseband video signals...
    9387
    SKU:
    9387
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    27.00 LBS
    Brand:
    Catel
    Model:
    CA-2100
    MPN:
    CA-2100
    Secondary Model:
    VFMM-2000
    Type:
    Dual Video FM Modulator Rack
    SKU:
    9387
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Includes two VFMM-2000 video FM modulator modules and PS-2500A power supply
    Form Factor:
    Rack Mount
    Number of Channels:
    2
    Modulator Model:
    VFMM-2000
    Power Supply Model:
    PS-2500A
    Power Requirements:
    110-125VAC / 220-250VAC, 48-62Hz
    Power Supply Output Voltages:
    +12.6V DC, -15V DC
    Connector Type:
    BNC (Input and Output per channel)
    Front Panel Indicators:
    Power LED, Deviation meter (VU) per channel
    Front Panel Controls:
    Deviation adjustment per channel
    Rear Panel Connections:
    BNC Input, BNC Output, +DC, -DC per module; Output Level control
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This Catel CA-2100 Dual Video FM Modulator Rack includes two VFMM-2000 modules and PS-2500A power supply. Shows surface scratches and wear typical of rack use. Pulled from a working environment. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • ERA Transpac LS324 DC Power Supply — left side and rear view showing black aluminum chassis and vent slots ERA Transpac LS324 Power Supply — right side view showing large finned aluminum heatsink with four output transistors

    ERA Transpac LS324 DC Power Supply 32VDC 4A 115VAC Input Benchtop w/ Sense

    Transpac

    $75.00
    Was: $150.00
    ERA Transpac LS324 DC Power Supply 32VDC 4A 115VAC Input Benchtop w/ SenseThe ERA Transpac LS324 is a fixed-output DC linear power supply manufactured by ERA Transpac Corp of Moonachie, New Jersey...
    9221
    SKU:
    9221
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    26.00 LBS
    Brand:
    ERA Transpac Corp
    Model:
    LS324
    MPN:
    LS324
    Type:
    DC Linear Bench Power Supply
    SKU:
    9221
    Output Voltage:
    32VDC (fixed)
    Output Current:
    4A
    Input Voltage:
    115VAC
    Number of Outputs:
    1
    Output Type:
    Fixed DC
    Sense Terminals:
    Yes — R− and R+ remote sense terminals
    Terminal Type:
    Screw Terminal Block
    Terminal Labels:
    HI AC, LO AC, GND, R−, −, +, R+
    Form Factor:
    Benchtop / Desktop
    Cooling:
    Passive — finned aluminum heatsink
    Enclosure:
    Black anodized aluminum chassis
    Country/Region of Manufacture:
    United States
    Manufacturer Location:
    Moonachie, NJ
    Condition:
    Used — Inspected, condition not fully documented
    Seller Notes:
    Unit only — no accessories included
    Condition Notes:
    ERA Transpac LS324 DC Power Supply, used surplus. No documented test or working status on file. Cosmetic wear consistent with prior use. Rating plate and terminal block visible and intact. Please contact us with questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $75.00
    Was: $150.00
  • Rudolph Model 600 Bi-Polar DC Power Supply – three-quarter front-left view showing power cord, ON/OFF switch, and front panel label Rudolph Model 600 Power Supply – front panel close-up showing ON/OFF rocker switch, red pilot light, Normal/Reverse toggle, calibration sticker, and brand label

    Rudolph Model 600 Bi-Polar DC Power Supply 175VDC Output 115VAC Benchtop

    Rudolph

    $65.00
    Was: $125.00
    Rudolph Model 600 Bi-Polar DC Power Supply 175VDC Output 115VAC BenchtopA benchtop bi-polar DC power supply that converts 115VAC input to 175VDC output. Features switchable polarity for reversible DC...
    9205
    SKU:
    9205
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    19.00 LBS
    Brand:
    Rudolph
    Model:
    Model 600
    MPN:
    Model 600
    Type:
    Bi-Polar DC Power Supply
    SKU:
    9205
    Condition:
    Used – Pulled from Working Environment
    Output Voltage:
    175 VDC
    Input Voltage:
    115 VAC
    Polarity:
    Bi-Polar (Normal / Reverse switch)
    Form Factor:
    Benchtop
    Power Requirements:
    115V AC
    Controls:
    ON/OFF rocker switch, Normal/Reverse toggle
    Indicator:
    Red pilot lamp
    Seller Notes:
    Unit only — no accessories included
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Rudolph Model 600 Bi-Polar DC Power Supply in good used condition. Case shows surface wear; all front-panel controls present and intact. Pulled from a working environment. No accessories included. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • Sperry Microwave AN/UPM-12A X-band radar VSWR test set – front panel open showing VSWR meter, controls, and connectors AN/UPM-12A VSWR test set open in carry case showing front panel and power cord, case stenciled AN/UPM-12A

    Sperry Microwave AN/UPM-12A X-Band Radar VSWR Test Set IM-104 PP-1227

    Sperry Microwave

    $525.00
    Was: $1,100.00
    Sperry Microwave AN/UPM-12A X-Band Radar VSWR Test Set IM-104 PP-1227 X-band VSWR test set designed for measuring voltage standing wave ratio in radar systems and microwave equipment. Operates across...
    9182
    SKU:
    9182
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    52.00 LBS
    Brand:
    Sperry Microwave Electronics Co.
    Model:
    AN/UPM-12A
    MPN:
    AN/UPM-12A
    Secondary Model:
    IM-104 / PP-1227
    SKU:
    9182
    Type:
    X-Band Radar VSWR Test Set
    Condition:
    Used – Pulled from Working Environment
    Power Requirements:
    115V / 50-1000Hz / Single Phase
    Measurement Type:
    VSWR (Voltage Standing Wave Ratio)
    Frequency Range:
    X-Band (approx. 8–12 GHz)
    Indicator Model:
    IM-104/UPM-12A
    Power Supply Model:
    PP-1227/UPM-12A
    VSWR Meter:
    Weston Model 760, FS=500UA
    Contract Number:
    AF04(647)210
    Manufacturer Division:
    Div. Sperry Rand Corp., Clearwater, FL
    Application:
    X-band radar maintenance, VSWR measurement, ham radio
    Form Factor:
    Portable / Carry Case
    Seller Notes:
    Includes IM-104 standing wave indicator, PP-1227 power supply, and original carry case
    Country/Region of Manufacture:
    United States
    Condition Notes:
    This Sperry Microwave AN/UPM-12A X-Band VSWR Test Set is in good used surplus condition with typical wear on the case exterior. Includes PP-1227 power supply and IM-104 indicator. Not bench-tested at our facility.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $525.00
    Was: $1,100.00
  • PMR/TRQ-3/U Range Timing Radio Receiver 73B100 – front panel view showing controls, rotary selector, and display PMR/TRQ-3/U Range Timing Receiver – rear panel showing J7 Antenna BNC, J8, J9 IRIG-B Timing connectors and output label plate

    PMR/TRQ-3/U Range Timing Receiver Rackmount 73B100 IRIG-B Pacific Missile Range

    Military

    $175.00
    Was: $350.00
    PMR/TRQ-3/U Range Timing Receiver Rackmount 73B100 IRIG-B Pacific Missile RangeThe PMR/TRQ-3/U is a military-grade Range Timing Radio Receiver built for use in missile range instrumentation systems...
    9162
    SKU:
    9162
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    26.00 LBS
    Brand:
    Unbranded
    Model:
    PMR/TRQ-3/U
    MPN:
    73B100
    Secondary Model:
    13672ASSY
    Type:
    Range Timing Radio Receiver
    SKU:
    9162
    Condition:
    Used – Inspected
    Part Of System:
    PMR/TD-29/TRQ
    Timing Standard:
    IRIG-B
    Timing Channels:
    IRIG B Timing (J9, J10, J11 connectors)
    Antenna Connector:
    BNC (J7 Antenna)
    Additional Connectors:
    J4 Timing, J5 LED, J6 Neon outputs
    Timing Channel Modes:
    CL-B, PM-E, PM-B, SNI-B, OFF
    Form Factor:
    Rackmount
    Application:
    Missile range instrumentation / range timing
    Organization:
    HQ Pacific Missile Range Technical Support Dep.
    Seller Notes:
    Unit only; no cables or accessories observed in photos.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Used PMR/TRQ-3/U Range Timing Radio Receiver 73B100. Visually inspected; good overall condition with light surface wear. Not powered or tested at our facility. Sold as-is for surplus. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $175.00
    Was: $350.00
  • Micro Star MS-136 Energy Converter Computer Power Center – front panel view showing brand label, input switch, and fuse holder Micro Star MS-136 rear panel showing 3-port outlet block, rating label, and AC power cord

    Micro Star MS-136 120V 60Hz Energy Converter Computer Power Center Line Filter

    Micro Star

    $35.00
    Was: $70.00
    Micro Star MS-136 120V 60Hz Energy Converter Computer Power Center Line FilterThe MS-136 is a line filter and power conditioning unit designed to stabilize AC power for computer systems and sensitive...
    9159
    SKU:
    9159
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    22.00 LBS
    Brand:
    Power-Science Industries
    Model:
    MS-136
    MPN:
    10-921
    Type:
    Energy Converter / Computer Power Center / Line Filter
    SKU:
    9159
    Input Voltage:
    100-130V, 60Hz (90-135V w/ reduced load)
    Output:
    Electronic Power Wave, 120V rms, 150V peak
    Efficiency:
    95%, reduces computer power 10-15%
    Regulation:
    3% Constant Peak Voltage
    Noise Rejection:
    40dB/Decade from 100Hz up
    Spike Rejection:
    4KV/20A, reduced to 1V, max. 50J
    Common Mode Noise Rejection:
    60 dB
    Max Load:
    350VA / 250W
    Input Fuse Type:
    Type ABC
    FCC Compliance:
    Ultra efficient Line Filter, generates no RF interference
    Output Outlets:
    3-port rear panel
    Form Factor:
    Desktop / Benchtop
    Condition:
    As-Is / For Parts or Not Working
    Seller Notes:
    Sold as-is. Description notes fuse holder may need replacement.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    Micro Star MS-136 Energy Converter sold as-is. Noted to need a fuse holder for full functionality. Not bench-tested. No functionality guarantee. AC cord and 3-port outlet block present. Review photos before purchasing.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $35.00
    Was: $70.00
  • Hughes Aircraft 3275720 PAM Decommutator – three-quarter view showing front panel controls and internal card cage with wiring Hughes 3275720 PAM Decommutator Phoenix DTM 82577 – front panel with word selectors, output connectors, and Local/Remote switch

    Hughes Aircraft 3275720 PAM Decommutator Phoenix DTM 82577 Rackmount

    Hughes

    $250.00
    Was: $500.00
    Hughes Aircraft 3275720 PAM Decommutator Phoenix DTM 82577 Rackmount The Hughes Aircraft 3275720 is a PAM (Pulse Amplitude Modulation) Decommutator built under the Phoenix DTM designation, model...
    9084
    SKU:
    9084
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    45.00 LBS
    Brand:
    Hughes Aircraft
    Model:
    82577
    Secondary Model:
    Phoenix DTM
    MPN:
    3275720
    SKU:
    9084
    Type:
    PAM Decommutator
    Condition:
    Used – Inspected
    Form Factor:
    Rack Mount
    Application:
    Telemetry / Flight Test Data Acquisition
    Connector Types:
    Mil-Spec Circular (J27, J28, J33, XF1)
    Front Panel Features:
    Word selectors, multiple outputs, Local/Remote switch
    Number of Outputs:
    Multiple (at least 4 output sections visible)
    Contract Number:
    N00019-71-C-0187
    Division:
    Flight Test Division
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Sold as-is. Unit only — no cables or accessories included.
    Condition Notes:
    This Hughes Aircraft 3275720 PAM Decommutator (Phoenix DTM, model 82577) is a used surplus unit pulled from a decommissioned aerospace/flight test environment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $250.00
    Was: $500.00
  • HP 8801A Low Gain DC Amplifier plug-in module — angled front and right-side view showing front panel controls and aluminum chassis with staining on side HP 8801A DC Amp plug-in module — left-side and rear view showing aluminum enclosure and multi-pin gold-contact rear connector

    HP 8801A Low Gain DC Amplifier Plug-In Module Hewlett-Packard V/DIV

    HP

    $65.00
    Was: $125.00
    HP 8801A Low Gain DC Amplifier Plug-In Module Hewlett-Packard V/DIV The HP 8801A is a low gain DC amplifier plug-in module made by Hewlett-Packard. It is designed to plug into compatible HP...
    9079
    SKU:
    9079
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    5.00 LBS
    Brand:
    HP
    Model:
    8801A
    MPN:
    8801A
    Type:
    Low Gain DC Amplifier Plug-In Module
    SKU:
    9079
    Condition:
    Used – Inspected
    Form Factor:
    Plug-In Module
    Amplifier Type:
    Low Gain DC Amplifier
    Range:
    V/DIV selectable
    Controls:
    Gain, Position, Balance, Cal, CAL & Zero
    Output Connector:
    BNC
    Rear Connector:
    Multi-pin gold-contact plug-in connector
    Country/Region of Manufacture:
    United States
    Seller Notes:
    Unit only; no accessories included.
    Condition Notes:
    HP 8801A Low Gain DC Amplifier plug-in module. Visually inspected; aluminum chassis shows side staining. Front panel controls and connectors appear intact. Not bench-tested at our facility — sold as-inspected. Please contact us with any questions.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • C-COR Electronics ASM-16A Antenna Site Mixer front panel with rack handles and toggle attenuator switches C-COR Electronics ASM-16A label closeup showing Antenna Site Mixer model and 16 Channels designation

    C-COR Electronics ASM-16A Antenna Site Mixer 16-Channel Rackmount CATV RF

    C-Cor Electronics

    $65.00
    Was: $125.00
    C-COR Electronics ASM-16A Antenna Site Mixer 16-Channel Rackmount CATV RF 16-channel antenna site mixer designed for CATV headend signal combining and RF distribution. Combines multiple RF signals...
    9035
    SKU:
    9035
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    4.00 LBS
    Brand:
    C-COR Electronics
    Model:
    ASM-16A
    MPN:
    ASM-16A
    Type:
    Antenna Site Mixer / CATV RF Signal Combiner
    SKU:
    9035
    Number of Channels:
    16
    Form Factor:
    Rack Mount
    Connector Type:
    F-Type (threaded coaxial)
    Output Attenuator:
    Mixer Output Attenuator — stepped: 1, 1, 2, 3, 5 dB
    Trunk Test Point:
    -20 dB
    Pilot Ports:
    2 pilot input ports (labeled 1 and 2) on rear panel
    Trunk Port:
    Trunk output — F-type, rear panel
    Mixer Output Port:
    Mixer Output — F-type, front panel
    Application:
    CATV / Cable TV Headend Signal Combining
    Condition:
    Used – Pulled from Working Environment
    Seller Notes:
    Unit only; no additional accessories included.
    Country/Region of Manufacture:
    United States
    Condition Notes:
    C-COR Electronics ASM-16A Antenna Site Mixer in good used condition. Shows surface wear and paint scuffing on chassis. All F-type connectors and attenuator switches present. Pulled from a working environment.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $65.00
    Was: $125.00
  • HP Hewlett Packard 45262-80201 Audio Interface Unit – top label view showing model number and specs HP 45262-80201 Audio Interface Unit – angled view showing rear mini-DIN port and RJ connector

    HP Hewlett Packard 45262-80201 Audio Interface Unit 45262-60000 12V 270mA

    HP

    $20.00
    Was: $40.00
    HP Hewlett Packard 45262-80201 Audio Interface Unit 45262-60000 12V 270mA Audio interface unit designed for telecommunications and test equipment integration. Converts and routes audio signals...
    7649
    SKU:
    7649
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    1.00 LBS
    Brand:
    HP
    Model:
    45262-80201
    MPN:
    45262-80201
    Secondary Model:
    45262-60000
    Type:
    Audio Interface Unit
    SKU:
    7649
    Voltage:
    12V DC
    Current Rating:
    270 mA
    Power Requirements:
    12V DC, 270 mA
    Form Factor:
    Compact Desktop Module
    Connector Type:
    Mini-DIN (audio), RJ-style port
    Country/Region of Manufacture:
    Germany
    Condition:
    Used – Inspected
    Seller Notes:
    Unit only; no manual or cables included.
    Condition Notes:
    HP 45262-80201 Audio Interface Unit. Good used condition; clean enclosure, labels intact, ports undamaged. Velcro strips on bottom show wear. Inspected. No cables or manual included.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $20.00
    Was: $40.00
  • Cabletron MMAC PSM-R Power Supply Module front panel and side view showing green PCB assembly and Cabletron label Cabletron MMAC PSM-R internal PCB top view showing transformer, capacitors, and multi-pin connectors

    Cabletron MMAC PSM-R Power Supply Module w/ Redundancy 9000246-04A

    Cabletron

    $28.40
    Was: $80.00
    Cabletron MMAC PSM-R Power Supply Module w/ Redundancy 9000246-04A Modular redundant power supply module designed for Cabletron MMAC-8FNB chassis installations. Provides switchable input voltage and...
    7266
    SKU:
    7266
    Availability:
    Usually ships within 1–2 business days.
    Weight:
    10.00 LBS
    Brand:
    Cabletron
    Model:
    MMAC PSM-R
    MPN:
    9000246-04A
    SKU:
    7266
    Condition:
    Used – Inspected
    Seller Notes:
    Power supply module only; no chassis or additional accessories included.
    Form Factor:
    Card / Module
    Compatible With:
    Cabletron MMAC-8FNB Chassis
    Power Requirements:
    110VAC/3A or 250VAC/3.5A, 47-63Hz (jumper selectable)
    Voltage Input:
    110VAC or 220VAC (jumper selectable at P4)
    Frequency:
    47–63 Hz
    Redundancy:
    Yes — Power Supply Module with Redundancy
    Country of Manufacture:
    USA (PCB); sub-components Taiwan
    Type:
    Modular Redundant Power Supply
    Sub-Component Model:
    Power General 4155-1AP-9943
    Condition Notes:
    This Cabletron MMAC PSM-R Power Supply Module has been visually inspected and shows typical wear consistent with prior rack installation. The PCB and components appear intact with no obvious physical damage observed.
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.40
    Was: $80.00
  • Philips BHL400L40 400W electromagnetic ballast – front three-quarter view showing enclosure and terminal block Philips BHL400L40 electromagnetic ballast – rear three-quarter view showing label area and mounting base

    Philips BHL400L40 400W Electromagnetic Ballast 230V 50Hz HPL HPI Copper Iron

    Philips

    $28.00
    Was: $60.00
    Philips BHL400L40 400W Electromagnetic Ballast 230V 50Hz HPL HPI Copper Iron Electromagnetic ballast for 400W HID lamps. This copper-iron core unit operates at 230V, 50Hz and supports both HPL...
    48379
    SKU:
    48379
    Availability:
    Usually ships within 1-2 business days.
    Weight:
    6.00 LBS
    Brand:
    Philips
    Model:
    BHL400L40
    MPN:
    9136 049 204
    SKU:
    48379
    Seller Notes:
    Ballast only; no additional accessories included.
    Country of Manufacture:
    Netherlands
    Form Factor:
    Encapsulated / Standalone
    Ballast Type:
    Electromagnetic Copper/Iron
    Power Rating:
    400W
    Input Voltage:
    230V
    Frequency:
    50Hz
    Input Current (with PF correction):
    2.15 A
    Input Current (without PF correction):
    3.25 A
    Power Losses (Gear):
    22.0 W
    Compatible Lamp Types:
    HPL (High Pressure Mercury), HPI (Metal Halide)
    Power Factor (HPL):
    0.55
    Power Factor (HPI):
    0.50
    Connector Type:
    Screw terminal block
    Application:
    HID lighting fixtures, industrial and commercial lighting
    Condition Notes:
    This Philips BHL400L40 400W electromagnetic HID ballast has been inspected and shows normal cosmetic wear consistent with prior use. The terminal block and wiring connections appear intact.
    Condition:
    Used – Inspected
    California Prop 65 Warning:
    WARNING: This product can expose you to chemicals including lead and lead compounds, and DEHP (a phthalate), which are known to the State of California to cause cancer and birth defects or other reproductive harm. Go to P65Warnings.ca.gov
    $28.00
    Was: $60.00